Blank Screen After Loading Files
Oct 7, 2010
i have a dell optiplex 780 desktop computer with 160GB hard drive and 4GB ram and its a 64-bit OS , I had a windows 7 installed on it but once my couzin used it and he put on a password on thw windows and then he obviously forgot the password but anyway i couldn't get in to my user so i googled and tried some ways to crack the password but didn't work so i kept restarting my computer to try new passwords and at one point my computer just wont work after the windows logo , Now it just goes blank after the windows starting up logo , so i decided to do a new clean windows 7 (32-bit) but when i choose to boot it from the CD room and it asks me to press any button to boot from Cd or dvd and i do press but after loading the files i get a blank screen and it would just stop, i can hear the cd running and all but no display
View 2 Replies
ADVERTISEMENT
Sep 9, 2010
I'm reinstalling windows 7 ultimate. I try and boot from DVD and it loads files the the screen goes blank.
View 9 Replies
View Related
Jul 21, 2012
I've run into a problem that's preventing Windows 7 from loading normally. The problem starting happening yesterday, when my computer froze up while I was surfing AGV antivirusver since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:1. Performed a System Restore to a day earlier.2. Startup Repair didn't detect anything wrong.
View 2 Replies
View Related
Apr 29, 2012
I've run into a problem that's preventing Windows 7 from loading normally. I'm still able to bring up windows in safe mode perfectly fine. The problem starting happening yesterday, when my computer froze up while I was surfing GameFAQs, forcing me to perform a hard reset. Ever since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank, with a message that it cannot detect an input and my pc just hangs there.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:
1. Performed a System Restore to a day earlier.
2. Startup Repair didn't detect anything wrong.
3. WIndows Memory Diagnostic didn't detect anything wrong.
4. Performed an Error Check on my hard drive with the built-in Windows tool with auto-repair on.
5. I rolled back my video card drivers (Nvidia GTX 460) to a previous version.
View 6 Replies
View Related
Jan 29, 2012
I bought a hp laptop about a year ago and have been having a problem for the last couple days. I have windows 7 and when I go to start the laptop up it shows the HP screen then goes to the windows screen like its loading but then goes back to the hp logo and is stuck. I ran a HDD test and memory test those came back good. I tried to go into safe mode it acts like it loading then shows a blank screen. I try to do a system recovery and system restore the screen stays blank. I also took the battery out and press the power button down but that hasn't work. It's no longer under warrenty.
View 3 Replies
View Related
May 5, 2010
When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
View 2 Replies
View Related
Dec 18, 2011
As of today I have been unable to download anything, when I go to download the page just goes blank and says loading, that is in googlechrome, in explorer I get to the download and it just does nothing, so I thought I would take of my AVG free and try a different antivirus (Avast) from C-net and filehippo, fool that I am, I can not down load either of them, so at present I do not even have antivirus on here,I have restored my pc.I have scanned my pc for problems emptied history and cache.rebooted my router.
View 6 Replies
View Related
Dec 19, 2012
I am currently facing some problems in loading webpages from browsers. I have tried every browsers with me like Firefox, IE and Chrome. But every time i enters an url, it loads the url( as i can see the title bar showing the website title) but the browser shows the blank page. So it does suggest that my internet connection is in good shape since the page title loads.
View 3 Replies
View Related
Sep 3, 2011
I'm new here.I couldnt find any solution for my problem anywhere and i thought i can find it here.
I have Windows 7 Ultimate 32 Bit and im trying to install it for about 6 months. I installed it once but after one week,os is gone and stuck at classpnp.sys
Here are the steps i followed when trying to install; Selected Boot Menu > CD/DVD
Seen windows is loading files. Seen Starting windows but its gone before the 4 colored windows logo comes.
And endless black screen. I also tried to boot from dvd in safe mode.It hangs at disk.sys I checked rams. I have 1 gb x 2 rams.There is blue and brown sockets for rams on my motherboard.
Both of rams connected to blue ones.When i disconnect one of them pc opens but same issue. When i disconnect one of them and connect it to brown socket pc didnt opened.
View 6 Replies
View Related
Dec 31, 2010
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies
View Related
Jul 6, 2012
After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
View 6 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
Feb 14, 2012
My programs no longer respond the way they are supposed to. They have lost their logos and look like blank files on my desktop. When I use open with google chrome, everything starts to open up to a tab in the chrome web browser trying to make a download.
View 5 Replies
View Related
Oct 3, 2009
I've been using my laptop for a while now and had a friend install Windows 7 onto it (because i'm quite rubbish with this sort of thing) and everything has been going great until a few weeks ago.
I loaded it up one day and everything is going fine until it reaches the part where it's supposed to load the log on screen. Instead of a log on screen all i am getting is a black screen with the cursor. Now i can't give you specs to my computer or anything of the like because i simply don't have access to it but i can give as much aid as possible to help find the problem.
One of the things that happens is that when the black screen & cursor appears if i move the mouse or push any buttons the screen goes VERY dim as if i've put it into a lower power mode or i've taken out the power cable. If i push the power button to turn it off even if it's just a tap on the button the screen will go off immediatly even if the laptop is still running.
One of the green lights that i believe is showing if the hard drive is busy or not flashes during the process but after a minute or so of the black screen it'll stop flashing altogether.
I've tried all three safe modes with all the same results, F8 to system repair has given me no love with startup repair finding NOTHING wrong, memory check running through the process only for the same thing to happen and system restore has no restore points to go to.
I've looked for answers in several places and some say i have to use sticky keys to get the screen to come on but the problem is that as of last nights use i turned sticky keys off for a few minutes so i could play a game and forgot to turn them back on afterwards. I've taken a look around the net and can't find a fix to my problem. Reinstall simply is not an option under my current circumstances so i really need a favourable reply.
View 7 Replies
View Related
Oct 27, 2009
well yeah used it on my windows vista it did make it faster and never had a problem(no I never bought it :P). then I upgrade to windows 7 and I ran it cleaned the error's and just screwed it up. I need to restore my registry, start up fix doesn't work and I don't have system restore on don't have a backup so I go to CMD in start up fix enter notepad look for files to restore stuff can't really find anything.
I can restore reg files by notepad I mean I tried a lot of stuff so is there any CMD command to restore registry or a reg file I can use to restore registry? tried sfc /scanow (i don't think it restore's registry only file's that are modded files that are not from Microsoft).
View 6 Replies
View Related
Jul 17, 2012
I also have an old computer with SATA hard drive running XP SP2, it is connected to samsung LCD tv, it was working properly for months but today while i was using it, the screen went blank(black) nothing showing on lcd, I tried every thing i can but of no use, even connected to other monior also but... nothing displaying, Cpu is running but when I tried to turn it off from power button it didnt response, have to switch it off from electric board.
View 7 Replies
View Related
Oct 3, 2011
I have read a lot on this getting stuck. I had an issue with it getting stuck, so I had HP to send me the recovery disks and I backed everything up and did a clean install. It did its thing and now it is at the Windows is loading files screen. Bad news is, it has been on this screen since last night at around 8:00 (12 hrs), Good news is, it has been moving. I put a sticky note on the progress bar, even this morning it has moved about a half an inch. Should I be worried or just patient? It said it may take up to 3 hours and it has been 12 hours.
View 6 Replies
View Related
Jul 29, 2011
I am running Windows 7 64-bit and whenever I start up into normal mode it loads a blank desktop with only a mouse. When I try right clicking or doing ctrl-alt-delete and starting task manager nothing happens.
View 12 Replies
View Related
Oct 22, 2009
running windows7 x64, i can hear music and my mouse over links, but cant see anything at all. i searched all over Google but cant find an answer either. tried all the normal stuff (running in xp mode, reinstall drivers) but nothing seems to work.
View 5 Replies
View Related
Oct 21, 2010
Pc: g73jh-a1
Os 7 Ultimate build 7600
Cpu- i70-stepping b1
Gpu - Ati 5870 Catalyst 10.8
Anti virus - Eset Security 4
All window's and driver's updates are successfully loaded.
Ok last night i was bored so decided to re-paste my G7 so i opened her up and cleaned the Cpu and Gpu nicely. Did my thing re-pasted her up and put everything back in order.I downloaded some benchmark tools such as Hwinfo, Amd gpu clock tools, cpu-z, gpu-z and aida64.I also have ccleaner installed so far that is all i have as of now besides the bench mark and anti virus tools.
I was running hwinfo and checking my temp's earlier today everything seemed normal as i was curing my tim and making sure the temp's where ok.While i was checking the temps on my g7 i went ahead and downloaded some files on my other pc transferring it to my usb so i could plug my usb and download the files from there. All of a sudden my monitor goes blank and everything seem to be fine all the light's where on except the monitor.So i went ahead and dissembled the g7 to make sure that i wasn't pinching any wires that run to my monitor nothing was wrong there i double checked took a look at all my wires and they where fine.I restarted the pc up 3 times before the picture came back so i decided to run a chkdsk scan and this is what i pulled up.
cleaning up 179 unused index entries from index $sii of file 9
cleaning up 179 unused index entries from index $sdh of file 9
cleaning up 179 unused security descriptors
View 5 Replies
View Related
Dec 10, 2012
My system is set to shut power to Monitor after 20 mins and to HD 30Mins. This has been working perfectly and suits my position as i frequently have to leave my PC fo 30 mins or so.Add thing last night the monitor was showing the open page (actually Win Live Mail) but the screen was also sjowing a number of rectangle areas a couple of inches wide with pale green and pink lines. The curser was still visible but the mouse an w]keyboard did not work. There was no response at all. I had to close down by pressing the on button for 5 secs. It appeared that the HD had closed down as had the monitor but the image stayed on the screen. Onrebooting I get no response on the Monitor at all. Not even a flicker. I have tried a different monitor but the result is the same. I listened carefully when I pressed the on button and I could hear the HD spin but it stopped very quickly and no other sound emitted aprt fromvery slight fan noise. So I'm stumped as I can't even get into the bios.
View 7 Replies
View Related
Dec 14, 2009
have a Dell Inspirion 1525 with Windows 7 RC dual booting with MacOS 10.5.8 on two separate partitions on one 160GB drive.
Windows 7 has been running great since installing on release day, this morning after i turned my laptop on, i got to the Windows bootloader, selected Windows 7, it then goes to a blank screen with the hard drive light constantly on. left it for about 10 minutes, nothing.
my MacOS install on the second partition still works 100%.
i tried a few things, startup repair from the Win 7 install DVD, it sees my Win 7 install on C: but gave an error saying it couldn't fix, the error report mentioned something about "startuprepairoffline" & "NoOSinstalled".
then tried a system restore from the disk, says it couldn't find any restore points (?!)
then tried to fix the mbr via recovery console, says it did the fix, but still won't boot.
View 2 Replies
View Related
Dec 15, 2009
Ever since I put Windows 7 Ultimate 32 bit on (about 6 hours ago) I get a black screen after boot screen, no login appears.
Black Screen:
* No Mouse
* No Keyboard
* No Screen (Duh) Its not a "Black Screen" more of a blank screen
I have attempted many fixes:
* Update Drivers for mother board
* Update Drivers For GFX card
* Batch Files in Start up (two different ones based on display)
* Updated BIOS
* Removing all other hard drives
Things that Have Worked:
* Running in Safe Mode
* Disabling GFX card
* Remove GFX card Drivers
This is how i came to the conclusion that my black screen is caused by my GFX card. But i don't want to have Windows 7 installed with out it (what would be the point).
My GFX card is a "NVIDIA 9800 gtx"
NVIDIA latest Drivers i have
195.62_desktop_win7_winvista_32bit_english_whql
View 3 Replies
View Related
May 9, 2009
I'm having a strange issue with RC1 x32 on my Dell XPS M1330. Everything was working fine a few days ago. It's a relatively fresh install (all I have is avast, itunes, firefox). Now when I boot all I get is a blank screen with a mouse in the center. There's hard drive activity, and I can move the mouse, but I can't login. I've tried typing my password and hitting enter to no avail. Also tried sleep cycling it, no luck.
I think it might be related to a driver called zFlashpoint that I just installed for my SSD. It's been rumored to corrupt parts of the registry. Does anyone have an idea how I can fix this if it's the case? I have a desktop which I can put the SSD in to perform repairs.
View 5 Replies
View Related
Dec 22, 2009
Just today I upgraded from Vista to Windows 7. This was a problem I had a few months ago with Vista on this same laptop, and I was hoping it would be fixed with Windows 7, but apparently it hasn't.
I just finished the installation and final reboot and everything, and I logged in, only to have the Welcome spinning circle on the screen for about 30-45 seconds, and then a blank screen with a moving cursor, but nothing else. After using Ctrl-Alt-Del to log out, I logged back in, and this time after 25-30 seconds of the Welcome spinning circle it logged me in.
Like I said, this was an occasional problem I had with Vista as well, but if possible, now that I'm using Windows 7 I'd like for it to not be a problem at all.
I'm running a 5 month old HP G60 laptop. During the upgrade process today I had to update my BIOS and everything else, so I think those should be fine. I just thought this would be the best place to ask if others have had the same problems and if so, what they did to fix it.
View 1 Replies
View Related
Sep 6, 2011
Yesterday I recognized, that my screen was blank at start up.I rebooted in safemode, and then the screen was ok.There I restored the computer to an earlier state, and it ran ok afterThe same ocured this morning, and now I don't have the opportunity torestore as there is no restore point.What I did when the computer ran ok was that I started up NFS.
View 1 Replies
View Related
Jul 9, 2012
I have a three year old HP laptop running Windows 7 (64 bit) that is misbehaving. It would not boot up recently, and I believe the root was heat related issues. My son likes to use it while setting on his bed - fan gets covered up and the laptop overheats. I added some large rubber feet to the bottom to improve clearance for the fan and that has helped, to a point. The laptop will boot and I can log into my son's account. After 5-10 minutes, the screen goes blank (50% grey scale, neither bright or completely dark). At that point, nothing seems to bring the screen back, so it is unusable and a hard shut down is necessary. I have cleaned it with Malware Bytes in the past and now have Microsoft Security Essentials installed, so I think/hope any virus issues have been resolved. My suspicion is that this is heat related, but exactly what is failing I do not know. Two months ago I replaced the power jack in the laptop and the power supply because of power connection problems. The battery is shot and will not hold a charge, so the laptop can not be used unless it is connected to the power supply. Since I replaced the power supply and jack, the laptop has been functioning okay. It would crash on occasion, but I attributed that to malware. I had to purge the hard drive earlier this year and restore the system because of a malware infestation.
View 3 Replies
View Related
Jan 27, 2011
for work, i am making a few Wim files to deploy different versions of windows 7.everything is setup and merged my multiple wim files together. the issue i'm having is when i come to the "Select the operating system you want to install" screen. it shows up blank but i can still select the many versions. it's like i didn't edit a file or add detail somewhere. picture below
View 5 Replies
View Related
Feb 11, 2011
I have a HP Pavilion Elite, OP windows seven. The problem i have is when i turn the computer on, it goes through the RAID boot up and the Ethernet Boot up. But after that, all I receive on my monitor is a blank black screen.
View 3 Replies
View Related
Nov 8, 2009
Yesterday I upgraded my ACER ASPIRE 7535G from vista to Windows 7. All went smoothly until I had to put the ACER cd back in after the installation to update drivers. It seemed to have crashed during this as the screen simply showed my wallpaper and nothing else, so I turned it off.
Now when i turn my laptop on, it powers up normally, with windows 7 logo etc, then the screen goes blank, the start up sound plays and the screen just stays on, but black.
View 9 Replies
View Related
Jan 17, 2012
When I start my laptop,after welcome screen before opening the desktop screen there comes blank screen in black colour for about 30 seconds.
However I have
Dell n5110 core i7
4 gb ram
500 gb gard disk
1 gb nvidia graphic card
View 5 Replies
View Related
