Receiving A Blank Screen When Loading Windows 7 64bit?
Apr 29, 2012
I've run into a problem that's preventing Windows 7 from loading normally. I'm still able to bring up windows in safe mode perfectly fine. The problem starting happening yesterday, when my computer froze up while I was surfing GameFAQs, forcing me to perform a hard reset. Ever since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank, with a message that it cannot detect an input and my pc just hangs there.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:
1. Performed a System Restore to a day earlier.
2. Startup Repair didn't detect anything wrong.
3. WIndows Memory Diagnostic didn't detect anything wrong.
4. Performed an Error Check on my hard drive with the built-in Windows tool with auto-repair on.
5. I rolled back my video card drivers (Nvidia GTX 460) to a previous version.
I've run into a problem that's preventing Windows 7 from loading normally. The problem starting happening yesterday, when my computer froze up while I was surfing AGV antivirusver since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:1. Performed a System Restore to a day earlier.2. Startup Repair didn't detect anything wrong.
I bought a hp laptop about a year ago and have been having a problem for the last couple days. I have windows 7 and when I go to start the laptop up it shows the HP screen then goes to the windows screen like its loading but then goes back to the hp logo and is stuck. I ran a HDD test and memory test those came back good. I tried to go into safe mode it acts like it loading then shows a blank screen. I try to do a system recovery and system restore the screen stays blank. I also took the battery out and press the power button down but that hasn't work. It's no longer under warrenty.
i have a dell optiplex 780 desktop computer with 160GB hard drive and 4GB ram and its a 64-bit OS , I had a windows 7 installed on it but once my couzin used it and he put on a password on thw windows and then he obviously forgot the password but anyway i couldn't get in to my user so i googled and tried some ways to crack the password but didn't work so i kept restarting my computer to try new passwords and at one point my computer just wont work after the windows logo , Now it just goes blank after the windows starting up logo , so i decided to do a new clean windows 7 (32-bit) but when i choose to boot it from the CD room and it asks me to press any button to boot from Cd or dvd and i do press but after loading the files i get a blank screen and it would just stop, i can hear the cd running and all but no display
I'm having a reoccurring issue with Windows 7 that always presents itself some weeks after I install it. I've run into this issue of installing windows updates only to have a blank screen with only the cursor present after I login from boot many times and have always had to reinstall. I'm wondering why this issue keeps happening, and what I can do to fix it.Ive tried sfc /scannow /offbootdir ..... several times but it either says it will do it on the next restart (which it doesnt) or it just says it can't run it.
i am having problems with my windows 7 devices and printers screen. I have tried all solutions like stopping the blue tooth support service, uninstalling printer drivers, registry fix for IE 8, stopping printer spooler service and changing display icons all to no avail. I have no idea when the problem started but ive been experiencing this for three months now. i think i dont want to reinstall my OS if it ii am using windows 7 ultimate 64 bit on 4gb ram and intel core i5 processor. also using ie9 as my browser.
When I enable my Nvidia geforce 9600 gso I cant get passed Windows 7 logo my screen goes blank very frustrating. I tried everything downloaded the new 191 drivers in safe mode uninstalled re installed etc then rebooted in regular mode and nothing. Please help. Is anyone else experiencing this too.
So now I have to disable nvidia graphics card in order to get into desktop and use the internet. This is where I am.
Everything worked on vista 32bit and I did a custom install with Windows 7 64bit. I also used Windows 7 compatability manager everything was ok, but had to do custom install.
When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
As of today I have been unable to download anything, when I go to download the page just goes blank and says loading, that is in googlechrome, in explorer I get to the download and it just does nothing, so I thought I would take of my AVG free and try a different antivirus (Avast) from C-net and filehippo, fool that I am, I can not down load either of them, so at present I do not even have antivirus on here,I have restored my pc.I have scanned my pc for problems emptied history and cache.rebooted my router.
I am currently facing some problems in loading webpages from browsers. I have tried every browsers with me like Firefox, IE and Chrome. But every time i enters an url, it loads the url( as i can see the title bar showing the website title) but the browser shows the blank page. So it does suggest that my internet connection is in good shape since the page title loads.
I'm trying to install Windows 7 Ultimate 64bit onto my blank harddrive via usb that was setup with the microsoft application for doing so.
It adds new windows files to about 80% then give me this error: Code: Windows cannot install required files. The file does not exist. Make sure all the files required for installation are available, and restart the installation. Error code: 0x80070002 Phenom x4 9850 6GB ram nvidia 9800gt seagate 7200rpm 750gig baracuda 460W PSU m2n78-la viola
After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
I have Dell studio series 1558,I have two issues: After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop. When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work.
After I turn on my laptop Dell starts and it says her resuming windows and then goes to a blank screen with my cursor. I removed the battery and held the power button but don't know what else to do. I don't have a restore disk. I'm running windows 7.
I seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
I started the machine today and after the welcome screen the screen becomes blank and i get a black screen for about 30 seconds.then i get the task bar and after about 10 seconds i get the desktop.
1> After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop.
2> When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work. My screen resolutions are:
Display: 1.Mobile PC Display Resolution: 1920*1080 (recommended) Orientation: Landscape.
I opened up my PC to move the front audio cable so that it wasn't sitting on the graphics card (was causing EM interference).When I tried to reboot, my computer now gets to the windows loading screen, then stops outputting video - so the monitor goes blank and eventually turns off. Windows continues to load in the background as I can hear the startup sound play.
1) Booting into safe mode (works fine, can view the desktop etc.)
2) Booting into low resolution mode (doesn't work, same issue)
3) Booting into safe mode, un-installing the graphics card, booting into normal mode and reinstalling drivers for graphics card (doesn't work, same issue)
4) Trying a different PCI-E slot (doesn't work, same issue)
5) Trying a different output on the graphics card (doesn't work, same issue)
6) Hard CMOS reset (doesn't work, same issue)
7) Trying a different graphics card (even worse, didn't get any video out even at BIOS screen - can't guarantee card is working as I don't have a second machine to test with but it was working the last time I used it a couple of months ago. Second card was ATI rather than Nvidia so shouldn't be using same drivers).
Things I intend to try but haven't had time:
1) Plugging into a different monitor (heard some people mentioning it may be to do with the monitor drivers not reporting max screen settings properly, I could find any windows 7 x64 drivers for my monitor as its so old but I do have a TV I can test with)
I let computer downlod updates for windows 7 and then when I hit restart like it said I had to for updates to be complete the screen went blank and the computer justs sits with a black screen. Because it is a laptop I can't power it off and when I try to hit the power button nothing happens. How do I get the computer to start again?
I recently used one key recovery for my lenovo laptop, after restoring, the windows logo is shown but after that my system goes into blank screen mode although the audio can be heard. But when i try with safe mode then i am able to see the screen, what can be the issue??
i recently got a new dual-monitor desktop built by a friend and it worked fine for the first week or so. a few days ago it started getting hectic whenever i tried to turn it on, in that it would frequently do one of two things:
1) the screens would both go black and post "no signal"
2) both screens would freeze in place and it would recognize no actions aside from turning the desktop off the "no signal" issue only appears when attempting to log in or right after turning the computer on, whereas the screen-freezing would happen at any given time, whether it be logging onto the computer, checking facebook, or playing diablo iii. it currently takes me 3-4 attempts to get it running properly each day. everything in the computer is new, so it shouldn't be a problem with bad cables connecting the monitors to the tower or the ports that the cables are connected to. i've tried moving the cables to different ports on the tower, and it doesn't really seem to be affecting the problem. nothing is out of place or unscrewed inside the tower, so it's probably a software issue. the same friend that built the computer suggested that i get the latest nvidia drivers since the most recent ones were available on the 14th, whereas my current nvidia drivers are slightly older. i tried downloading the most recent one, but then i received the screen-freezing problem. whenever i attempt to download anything video-related online, the comp simply freezes up again. i can play Internet videos and diablo iii fine, just not download anything significant off the internet. my friend tried working with the comp as well, but he's at his wit's end and suggests that we get outside help in diagnosing the problem, so he recommended this site.
computer specs are as follows:
windows 7 ultimate (service pack 1) intel core i7 cpu 64-bit os x2 gtx460 video cards 12.0 gb of ram
I did a clean windows 7 installation after formatting my Hard drive the installation went clean i noticed that after switching my computer it takes me directly to " starting windows " and then to " Login screen " but in my previous installation i use to get,As shown in the picture, the black screen showing microsoft corporation logo with green bar and i am not getting the same in my new installation what went wrong.
HP G60 laptop, after the unit has been on for 10min or more it has a random issue with the display going blank. If you move the mouse the display comes back as long as the mouse is moving. Stop moving the mouse the display goes blank. Sometimes if you let it sit awile it will start working again. It is now so bad the computer is not useable. It has McAfee protection and I run system fix it utilities 11.
I'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.
is there a way around this so I can use the S-video output for the rest of the installation?
I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.
I am using windows 7 ultimate on my samsung laptop. today I tried to install ubuntu in dual boot mode with my windows 7. I installed ubuntu 12.04 on e drive( mounted as ext 4) and 1.5 gb of swap partition..the installation went smooth but when I restart I get a blank screen with crusor blinking?
