Fresh Install Of Windows 7 Results In A Blank Black Screen?
Nov 18, 2012
I just installed a fresh copy of windows 7, the setup process even took me far enough to create the account, time, homegroup settings ect. It seemed successful. Then it restarts one final time and results in a blank screen after the bios screen flashes. I've tried every setting in the BIOS with no avail. Pressing CTRL ALT DEL at the blank screen just restarts the computer, flashes the bios as usual, and then when you should see the windows loading sign it loads a blank screen with no mouse cursor at all.
I've already tried formatting twice and it results in the same exact issue. The computer was working fine before hand, didn't add any hardware or anything.
View 5 Replies
ADVERTISEMENT
Nov 19, 2012
after searching on microsoft's website, google and finally Tomshardware... I couldnt find anything close to what im experiencing.My computer was working fine, no issues or problems. I decided to do a fresh install because it had been about 1.5 years. Thats where all the trouble started....I have a legal Copy of windows and a Legal CD I bought from a store so piracy isnt an issue.1) I tried to install windows 7 home prem 64 bit and i kept getting a Missing Boot Mgr message. I figured out that when windows was installing it wasnt creating the 100mb partition for system files and what not.2) After fix that, my computer would not boot to desktop unless i had the Windows 7 CD in... I unplugged all other HDD's (2 Storage), Reformated and it worked.
3) Now once windows finished installing, I opened a few basic programs without installing any drivers or updates. Everything worked, left it up and idled for an hour no problems, ran tests on Mem and HDD no problems either. 4) I did my windows updates and it installed after which it prompted me to restart... I did and thats when the problem happens. I takes a very long time to boot into my desktop and once there, I have a 1920x1080 resolution (from 800x600) and i have no Icons, taskbar or anything but my wallpaper... if i press Alt + Ctrl + Del i get a black screen and if i press ESC i get my wallpaper background back...5) I deleted the partition & reformated, and same issue after updates. The comptuer works perfectly fine in safemode and boots to my desktop... It is very weird. I ran Windows repair and I even open CMD Prompt and typed in the commands to fix the boot, fix the MBR and scan the OS, Everything was fix or operational.
View 1 Replies
View Related
Dec 12, 2011
[URL]This video shows pretty much what it looks like. Just installed Windows 7 on a different computer, and that's the screen I get when I turn on the computer now. CTRL+ALT+DEL does nothing, though the little buttons in the corners do work.
View 2 Replies
View Related
Oct 17, 2012
I recently got a PC that my office was getting rid of. The PC was in great shape and I was told it worked fine when they gave it to me. They ripped out the hard drive and gave me the machine. As soon as I got it, I put a brand new 2Tb Seagate HDD in. I also replaced the existing RAM (2x1Gb sticks) with 2x 2Gb sticks with the memory speed to match my motherboard. Finally I swapped out the ATI Radeon HD2900XT with a Nvidia Geforce GTX 460. There was a sound card (PCI) I removed as well as a redundant firewire port I unhooked from the Mobo. I then booted and peformed a fresh install of Windows 7 32bit Pro. Everything seemed to be going fine... until I tried to shut down. Windows would freeze on the Shutting Down screen. I mean freeze because the spinning circle would stop and the entire machine was unresponsive.
I read online that pre-Service Pack 1 Windows 7 didn't like multi-core processers and would have issues shutting down, so I updated to SP1 (along with a bunch of other updates). Now when I try to shut down, the Shutting Down screen disappears and the signal to the monitor ends, however the machine stays on. I can hear the fans running and see the lights to the PCI cards still on. Once again I have no option but to hold the power button until it shuts down. One extra note I double checked every driver and they are all up to day. Also when I boot in Safe Mode the PC shuts down fine and I have no problem restarting, just shutting down...
View 5 Replies
View Related
Nov 21, 2009
After few seconds start screen disappears and is repalced by a Black/Blank screen with only mouse pointer. Mouser is working but there is nothing on screen to click on. Keyboard is working fine too. (checked with NumLock and Caps Lock keys)
Nothing happends beyond this point even after rebooting and repeating above process.
Searched internet for above problem symptoms. Looks like Windows 7 decides default monitor on its own. There is no way to decide it yourself duing installation.
My motherboard has two ports. 1 DVI and 1 analog. I have only 1 Analog monitor and do not plan on buying/having another monitor.
DVI to analog convertor is not available in market to test display from DVI port.
Could somebody please help?
View 8 Replies
View Related
Jun 29, 2009
I'm not sure if it's a W7 issue or not but I never had this problem with XP.
Alt tabbing to desktop from a running game is causing the black screen problems since my install. I am unable to get back to desktop or to the game after doing this. It happens in these games:
Crysis
Farcry 2
CountersStrike Source
Team Fortress 2
Anyone got a solution for this problem?
View 9 Replies
View Related
Dec 23, 2011
My computer frequently crashes to a blank (black) screen when I play games like TES V or Fable III, and leaves me no alternative but to do a hard reset with the power button. I've cleaned out the air vents several times to no avail, and I'm pretty sure my video drivers are up to date. As far as I can tell the CPU isn't being overused either.I've had a very similar problem before, and last time cleaning the vents out with a compressed air can did the trick. The only difference last time is that it wasn't always a blank screen, sometimes it hard weird vertical lines all over it.
View 2 Replies
View Related
Nov 12, 2011
I'm running Windows 7 home premium 64 bit. My my laptop is about 6 months old with 8gb RAM. I have recently done a fresh install and ever since then I'm getting random screen freezes (it never happened before fresh install)... the mouse, keys, ctrl alt delete etc.wont respond and the only way out is to hold down power and restart.I thought it could be a RAM problem but I have checked with memtest with no problems found. I have also scanned with malwarbytes antimalware with nothing found.
View 14 Replies
View Related
Mar 28, 2011
I'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.
is there a way around this so I can use the S-video output for the rest of the installation?
View 3 Replies
View Related
Feb 23, 2012
I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.
View 9 Replies
View Related
Jul 1, 2009
I'm having problem when i make install windows 7.when the setup is over and the pc restart for the first time windows7, then my screen turn to black and only the logo is appearing down in the corner of the screen..and i was thinking , maybe it want a lot of time to start so i let it for many many hours but it continues to look like that with the black screen and the logo..
So i try to install in another pc and everything gone just perfect!!
WHAT IS THE PROBLEM FOR MY PC? WHAT CA I DO? don't know:
I tried a lot of times to install it, for almost a month every day! what is wrong with my pc? is it real? only mine?
View 9 Replies
View Related
Aug 25, 2012
I have just bought a Zoostorm PC off of eBuyer as it was only £150. I am trying to install Windows 7 on it. I boot into the DVD no problem, get the usual grey "Windows is loading files" progress bar and then the windows logo saying windows is starting. At this point the screen goes black and everything stops.After some googling and numerous different possibilities it seemed most likely a graphics driver issue. I have an nVidia GeForce 210 that ive put in to see if this helps, and i get the same issue but this time i get a mouse pointer in the middle of the black screen. If i keep moving the mouse the cursor moves for a second after the windows logo disappears then freezes.
* Resetting the BIOS to defaults.
* Using the onboard graphics
* Using my graphics card
* Re-seating the RAM
* Slipstreaming the SATA drivers into the Win 7 Install DVD.
* Changing SATA mode to AHCI, IDE and RAID.
I have also tried installing windows XP. This is successful and detects the hard drive without me having to specify additional drivers. Upon restarting the PC and booting into the second part of the install it freezes on the pale blue wallpaper that setup uses.
View 24 Replies
View Related
Oct 1, 2012
My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
View 1 Replies
View Related
Jul 26, 2010
I'm having some problems with my PC, and suspect it MAY be related to Windows 7. Yesterday I was using my PC and it started crashing. It would either freeze, show me a blue screen error and reboot, or just flat out reboot. I believe the problem is one of three possible things: Windows 7 problems, bad motherboard, bad CPU. I've been using this PC in this configuration with no changes since November, 2009 when I upgraded my PC, and haven't had any problems with it until recently. I have an upgrade disc, and I always do the Clean Install option. I tested it with different video card & sound card configurations, and with a single memory stick in different ports, etc. I've also downloaded and ran Seagate's SeaTools program to do a hard drive check and it came out clean. No matter what hardware configuration I tried, it still crashed. It would work for about 5 minutes, then crash. Strange thing is, it would not crash if it were in safe mode, which led me to believe it was a problem with Windows or possibly some drivers.I tried to do a system restore and, as usual, it didn't help at all. I finally decided to just try and wipe the hard drive and do a clean install. Every time I try to install Windows 7, it goes through the install process until it gets to the last step, reboots, then when the progress bar is about 3/4 of the way through, I just get a black screen with my mouse cursor. I can move the cursor, but can't do anything else. Hitting CTRL+ALT+DEL does nothing. i've tried installing it at least 4 times and always get the same result. I also tried installing the 32-bit version of Windows 7, same thing. When I install an older copy of Windows XP Pro that I have, it will install but that's about it. It won't let me install my video drivers or do much else with it.
This setup has been working without issue since November, 2009. I've not even opened the case in at least 6 months, and don�t install a ton of new programs. Haven't installed anything in the last 2 weeks. The main reason that I suspect a possible problem with the motherboard is that I have had a problem where, when booting up the PC, I get a very quiet tone during the POST test, then I get the usual *beep* and it boots up. There was a problem for a while where it wouldn't boot up, and I would just shut it down & restart it and it worked fine. More often than not, it would boot and work with no problem, so I didn't bother doing a warranty return on it. I've been looking through the forums here and I've tried recovering the boot record as outlined here: MBR - Restore Windows 7 Master Boot Record - Windows 7 Forums
View 3 Replies
View Related
Jul 26, 2010
suspect it MAY be related to Windows 7. Yesterday I was using my PC and it started crashing. It would either freeze, show me a blue screen error and reboot, or just flat out reboot. I believe the problem is one of three possible things: Windows 7 problems, bad motherboard, bad CPU.
I�ve been using this PC in this configuration with no changes since November, 2009 when I upgraded my PC, and haven�t had any problems with it until recently. I have an upgrade disc, and I always do the �Clean Install� option. I tested it with different video card & sound card configurations, and with a single memory stick in different ports, etc. I�ve also downloaded and ran Seagate�s SeaTools program to do a hard drive check and it came out clean. No matter what hardware configuration I tried, it still crashed. It would work for about 5 minutes, then crash. Strange thing is, it would not crash if it were in safe mode, which led me to believe it was a problem with Windows or possibly some drivers.
I tried to do a system restore and, as usual, it didn�t help at all. I finally decided to just try and wipe the hard drive and do a clean install. Every time I try to install Windows 7, it goes through the install process until it gets to the last step, reboots, then when the progress bar is about 3/4 of the way through, I just get a black screen with my mouse cursor. I can move the cursor, but can�t do anything else. Hitting CTRL+ALT+DEL does nothing. I�ve tried installing it at least 4 times and always get the same result. I also tried installing the 32-bit version of Windows 7, same thing.When I install an older copy of Windows XP Pro that I have, it will install but thats about it. It wont let me install my video drivers or do much else with it.
Heres my PC info:
Motherboard: MSI NF750-G55
CPU: AMD Phenom II X2 550 Black Edition
Memory: 4GB (2 x 2GB) G. Skill DDR3 1600 SDRAM
Hard Drives: 1 TB Seagate & 350GB Western Digital
Power Supply: Cooler Master 500W
This setup has been working without issue since November, 2009. I�ve not even opened the case in at least 6 months, and dont install a ton of new programs. Havent installed anything in the last 2 weeks. The main reason that I suspect a possible problem with the motherboard is that I have had a problem where, when booting up the PC, I get a very quiet tone during the POST test, then I get the usual *beep* and it boots up. There was a problem for a while where it wouldn�t boot up, and I would just shut it down & restart it and it worked fine. More often than not, it would boot and work with no problem, so I didn�t bother doing a warranty return on it.
View 9 Replies
View Related
Aug 27, 2012
I installed Windows 7 on my desktop pc & when it's done the first stage it reboots. Then it takes me to the part where it says 'Completing installation...' and it hangs at that for a minute or two. Then the screen goes black and i dont know
View 2 Replies
View Related
Feb 2, 2012
I just did my first build and I am having a big problem with installing windows 7 on it. When I boot it's starts loading and then I get a black screen. I didn't get any options before or any command.
[code]...
View 3 Replies
View Related
Dec 11, 2012
I'm loading a new system and encountering a problem I haven't seen before. I have a Gigabyte Z77MXD3H motherboard with an Intel i5 3570 proc. When I boot to the Windows 7 install disk I get the BIOS splash screen, then the monitor goes so dim I can't read any text during the boot process but I can tell there is text on the screen. The monitor's menu also appears so dark its unusable. After some time the text mode finishes and the Windows install menu pops up and everything returns to normal. I can find loads of posts about black screens after windows boots, but not before.
View 1 Replies
View Related
Mar 4, 2011
I've had this issue on two builds now (issue came out the blue on the first build and assumed, wrongly of what part had broken), upon the final part of the install where the installer states finishing install the monitor goes blank (no cursor etc) in the same manner as during a graphics driver install however it fails to return to the rest of the install, occasionally if left blank for long enough and the system is restarted it will boot up and into windows. However upon installing the ati drivers for my radeon 4870x2, and restarting, windows will then hang on the loading windows logo and not progress further. I have read on the forums that this may be due to the power supply, however the power supply is of a different model (850w XFX Black Edition), however i have only had this power supply a small amount of time as i bought it to replace a corsair psu that died on me. Across the builds I have swapped (and tested in other machines) every part except the hard drives and the power supply and have experienced the same issue. After approximately 5-6mins of the loading windows logo it displays a quick blue screen then restarts. Current build specs are: ASUS M4A88T-M motherboard4 gig of corsair xms 3 ramradeon 4870x2and athlon 2 x3 (3.2ghz) Just wanting a second opinion before i splash out on another power supply.
View 1 Replies
View Related
Nov 9, 2009
Ok, heres the deal, I have been trying to install windows 7 on this pc for awhile now, I cannot figure this problem out no matter how hard I try.
The installation goes fine up until 'finishing installation' when which the screen just goes black and never does anything, ever overnight.
After restarting it will goto the logo screen and then just load onto a black screen, again never doing anything further.
Finally, when attempting to access safe mode, it loads up to classpnp.sys and then freezes.
Now, I have tried many many things to fix this and done lots of Googling but nothing has worked, other versions of Windows install and work fine.
Things tried...
1. swapping video cards
2. Switched monitors (I have read there can be an issue relating to this with needing a VGA plugged in however my card does not offer VGA, nor do I have onboard video.
3. Multiple installs of diff win 7 versions
4. Bios tinkering and restoring defaults.
5. many other things...
If someone could somehow help figure this out, then well I would be really appreciative...
View 12 Replies
View Related
Jul 2, 2011
My computer would not get past the start up screen � it just froze at the Windows 7 logo. Prior to this, I had absolutely no problems. I shut it down one night and came to start it the next morning and it wouldn't load. I format the drive and tried to reinstall Windows 7. It seemed to load everything fine and got to the "Completing Install" part, then just flicked to a completely black screen with a blinking line in the top left-hand corner.I did read on one forum that perhaps it was a RAM issue, so I removed one stick and the process actually completed! I thought I had nailed it. After setting my computer back up and with everything working just fine, I put the RAM back in. On restart, it locked at the logo again, so I figured it was definitely bad RAM, HOWEVER!! Even with the RAM now removed, I cannot get Windows 7 to reinstall. I am still getting this awful black screen with a blinking cursor.
View 1 Replies
View Related
May 6, 2009
Using a booting USB and selecting clean install, the install completes mostly, it reboots a few times like normal. When it should be time to enter the key, the screen is completely black *except* for the Windows 7 watermark.
Are there any known issues with this board and the on-board graphics chip?
Can anybody recommend a HDMI card to drive my Plasma Display that has good 7 support?
View 3 Replies
View Related
Aug 30, 2009
I upgraded from Vista64 to Windows7 64bit final (not a clean install) on an HP M9300T desktop.
Everything worked fine, until the final restart. System will start, I get the colored thingees, I get the Welcome screen, when it should go to my desktop, I get only a black screen with the arrow in the middle. Even if I boot into safe mode, I still only get the black screen...
I've tried reinstalling x4.
I can hit CRTL+ALT+DEL and get to the task manager, and I can run task, programs go on-line etc.
Ran the Nvidia control applet, the monitor is set to native resolution @ 59hz. Don't know if that is causing a problem, I've changed it but it doesn't seem to stay set.
Other than the DVI output I've tried VGA and HDMI outputs to several different screens from the GS 9800 video card, no change.
I even browsed to the Nvidia site and installed their latest Windows 7 64bit WHQL drivers. I've disconnected everything except the keyboard, monitor and mouse, I've pulled every card out of it except the video card, no change?
View 1 Replies
View Related
Dec 7, 2011
So, Im doing a clean windows 7 install. Here are the facts: [code] After the final stage of the setup where you enter PC name, set the password, enter time settings etc, the setup restarts the computer for the 'final' time, final indeed.What happens is that after the Bios / device scan, Windows won't boot and it won't continue past the black screen with the white blinking _ showing in the top left.Could this be because C: has been 'occupied' (or set as master partition) by the 1480GB partition and won't boot from the 105GB partition where Windows was installed?It's so weird because the first two reboots go without problem, no need to F8 and manually select the disk rather than the USB pen or anything.. But on the final reboot, nothing.
View 8 Replies
View Related
Jul 6, 2012
After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
View 6 Replies
View Related
Oct 12, 2009
I upgraded from Vista Home Premium and I've been having issues when I close the lid of my laptop, it'll automatically go to sleep. When I open the lid, a blue screen comes up, notifying me that there is an issue and then it restarts.
View 9 Replies
View Related
Aug 30, 2010
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
View 5 Replies
View Related
Oct 29, 2011
A couple months ago i bought my computer, it came with no windows 7 discs. How would i go about putting a fresh install of windows 7 on it?
View 12 Replies
View Related
Mar 19, 2011
So I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
View 3 Replies
View Related
Oct 1, 2011
I'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
View 3 Replies
View Related
Mar 12, 2012
I am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
View 1 Replies
View Related
