i recently bought acer 7736g with windows 7 in it
as the laptops were installed up and until recently with vista, i want to know if my machine was first installed with vista and upgraded to 7 or had a clean install.
any thoughts ?
Want to upgrade Vista Home to Windows 7 Premium. The workstation definitely has the horse power for Windows 7.But visiting computer shops, the upgrade options are cleared out or not available and they suggest a new install of Windows 7 Professional, they also say its cheaper than an upgrade $140 vs $250. Windows 8 is not an option at this time.I have very little data or software on the current machine with Vista,but do have Outlook 2010.Will a new install of Windows 7 clean out the hard drive and I'll need to re-install Outlook?
View 9 Replies View RelatedI have windows Vista business with SP1 installed on a Dell Latitude laptop D830. I have run Windows upgrade advisor , it is giving me clear signal to upgrade to windows 7 professional or ultimate. Now with so much news about upgrade problems occurring. Should I upgrade or do clean install? Also I want to know , if there is a difference between windows 7 upgrade and windows 7 full version? With windows 7 full version, Can I get the upgrade option also?
View 4 Replies View RelatedI am currently running an OEM version of windows vista ultimate 32 bit. I just bought an OEM version of windows 7 professional 64 bit. Will I be able to clean install and activate my new w7 even though I already have OEM vista installed on my motherboard?
In short, Can I install OEM over OEM?
what I have: Vista 32 bit system - 2 hard drives
what I want: Win 7 64 bit system - 2 hard drives
what I want to do: a clean install of Win 7 64 bit on the primary hard drive
the second hard drive is free to be used as a backup location during the clean install process
question: how do I backup all critical data to the secondary hard drive before doing a clean install on the primary drive? and then how do I reinstall the data from the secondary drive back to the primary hard drive with the new Win 7 64 bit system on it?
So I decided to upgrade my desktop and have completely replaced all of the hardware, however that's irrelevant. I currently have Windows Vista Home Basic on the system but was offered a copy of Windows 7 Professional for $30 from my university and wanted to know if I could install a clean copy of Windows 7 Pro on a system that has Windows Vista Home Basic since I know I cannot upgrade.
View 7 Replies View RelatedI did a clean install of Windows 7 Ultimate onto my Vista Ultimate Boot Camp Partition (on my MacBook Pro), rather than an upgrade install.
Windows 7 told me that it would move Vista to a folder called Windows.old or something like that.
Fine. After everything was installed, I used Disk Cleanup to delete that folder, and the space was recovered on my partition
But when booting into Windows 7, I get a boot menu that seems to indicate Vista is still there.
So my question is, can I simply delete Entry 2? Or is there other remaining stuff from Vista still on my drive somewhere that I should also delete? What is the drive "Active Boot Partition"?
I wish Windows 7 gave an option to do a clean install WITHOUT keeping the old system around...The whole point of doing the clean install was to get rid of all the accumulated junk and start fresh.
I currently have vista 32 and ordered a full version of windows 7 professional sp1 64-bit. The disk that came in the mail says "Reinstallation dvd windows 7 professional sp1 64 bit". Will this Reinstallation DVD allow me to do a clean install of windows 7 64-bit on my computer?
View 1 Replies View RelatedDoes anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View Relatedsavvy, and am having troubles installing Windows 7 on my laptop. I purchased the software, downloaded the .iso file from Microsoft's site, then burned the .iso file to a disc. Once on the disc it showed a few different folders and a setup option. I launched the setup option, which brought up the install window for windows 7. I chose clean install because upgrade is not an option for the current version of vista that I have, and while it is copying the files, after about 3% it gives me the error code 0x80070241 and says something about not being able to copy all of the needed files and that some of them may be corrupted. I don't know if this is a problem with my computer or with the disc that I've burned.
View 2 Replies View RelatedCompaq Presario SR5010NX
Celeron D processor 360
Vista Home Basic
512 MB RAM
120 GB HDD
Intel graphics media accelerator
DVD/CD w/Lightscribe
This system is so sluggish it either has multiple infections or is just overloaded given its puny 512 MB of RAM, so I can't really use the system specs utility at the moment.Since I'm working on a similar clean install for an ACER notebook which is Win7HP 32-bit, what are the chances that the .iso file I'm burning to DVD can also be used for this much older technology. I have no problem upgrading the RAM to its max, unless it's already at its max?
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View RelatedI have a couple questions I have been trying to hunt the answers down for. Im super paranoid considering the not so easy to find rules and regulations Microsoft has for its software.I currently have an OEM version of Windows 7 Home on my laptop. I was wondering if:
1. I can upgrade from a Windows 7 Home (which was pre-installed on my laptop) to Windows 7 Professional using Windows Upgrade Anytime? If so,
2. Will problems that I have on my current windows transfer to the upgraded version? If not,Is it possible to do a 'clean install' of the upgrade?
As I will build a new computer, I need windows 7. (I only have Vista on my old)Is it, as described in this video, good enough to buy upgrade version for this?
View 1 Replies View RelatedAnyway, I am running build 7022 x86 and was planning on upgrading my maching and going with x64. First, is this possible as a simple upgrade? If so, are there any concerns or issues I should know about when attempting this? A clean install is not out of the question but obviously when testing these new builds, its nice to be able to just upgrade.
View 7 Replies View RelatedWe already tried the link for the steps to do a clean install. Clean Install Windows 7 We still get 0xC004f061 The software licensing service determined that this specified product key can only be used for upgrading, not for clean installations.
We have a full older version & hoped sticking it in the hard drive would allow Windows 7 to find it. We really don't want to have to install the old one then the new one.
Problem with the detailed instructions was we got to the Activate window and we never got the Automatically activate Windows when I'm online checkbox. Just typed in key hit (Next) and it went through it's activation check & didn't like us.
Problem is we have been at it all day and this is like the 10th time we installed it. Computer had a virus. Took it a while to confirm the Bootable section of the hard drive was fried.. So we really don't want to take it down again, in order to install an old OS so the upgrade can "see" it.
I have an acer laptop which came with vista, i then upgraded it to 7 with the upgrade that acer sent me. I made an image of it which i had to use after getting a virus. I now want to install a clean installation of 7. After reading some of the other tutorials which said you can use the upgrade dvd to do this, i tried it but with no joy. I changed the BIOS to boot from DVD drive but the upgrade DVD does nothing.
I have the acer recovery discs but they were made when the machine had vista on it. i've used them but after i use them the "bootmgr is missing" and i have use my image again to get the computer up and running again.
Ok, now that Windows 7 is out "officially" who do you guys think?
I installed fine using Upgrade from Vista SP2 Ultimate. Everything worked fine without any new driver install. All my programs worked right away.
I like the system, I like the speed. So I keep asking myself will it be better if I install again in a "clean install" way?
What's your opinion, what's better? And what you did?
Can you fresh install with an Upgrade version of Windows 7? I want to save some money by buying the Upgrade. However, if I have to install my old OS first then upgrade, that isn't really a clean install. I'm wondering if you simply have to prove you have an older Windows version so that you can upgrade, or if it literally has to be on the PC for it to work.
Second, does anyone know if the Upgrade trick works with Win 7? As in, you install the Upgrade without entering a key, then "upgrade" your upgrade?
What is the received wisdom on upgrading from Vista to Windows 7? I have always been in favor of clean installing but is there any advantage in reformatting and clean installing in this instance?
View 4 Replies View RelatedShould I do a Clean Install of Windows 7 or an Upgrade Install?
Is one choice deemed better than the other?
i like fresh installs on a Zeroed hard drive. i got win7 64bit but its an upgrade disk only. i have legit xp64bit right now. my question is this. the option that says " all information will be lost" or something like that is that a fresh install where it formats the drive and then installs a fresh windows 7 install? or does it just convert the old files and like a normal install?
View 7 Replies View Relatedi have 64 bit vista home premium and recently bought the full 7 os in case a clean install is the way to go, so for the best performance do i return the full os and get the upgrade or go with the clean install?
View 9 Replies View RelatedWith VISTA, you could not install a fresh copy, you needed to upgrade your existing OS. (unlike XP, 2000, etc.)
Did this change with 7? Can you do a clean install from an upgrade 7 DVD?
I did a reformat of my hard drives, completely clean, recently, and reinstalled my copy of Windows 7 without problems. However, the activation did not go smoothly, my key is a Windows 7 Home Premium 64bit UPGRADE key, and it told me that it couldn't be used.
I have read the other threads on this subject, but couldn't figure out if there was another way or not to deal with this situation, other than buying another copy of windows, or wiping again, installing xp or vista, and then upgrading.If possible, I would prefer to not have to reinstall windows, or move my files around, because I was borrowing the external drive I used to reformat the first time, and I'm currently in college.
Is there a difference between a clean install of Windows 7 Professional and upgrading from Windows 7 Home Premium to Windows 7 Professional?I ordered a computer and I require Windows 7 Professional, but they accidentally sent me one with Windows 7 Home Premium. They have offered me a Windows 7 Professional Upgrade disk as a resolution to the problem, but I'm worried an upgrade may not be as stable as a clean installation and I'm not sure if I should accept this resolution.
View 3 Replies View RelatedI'm currently running Vista Home Premium 32-bit.
I'm going to buy Windows 7 Home Premium 32-bit upgrade.
I want to do a clean install on a new hard drive I just bought.
I'm going to put the current Vista hard drive on SATA 1
The new hard drive for Win 7 will be on SATA 0
I can't figure out what procedure to use so Win 7 Upgrade sees the old activated Vista to activate Win 7.
In short, I want a clean install via Win 7 upgrade media on a seperate hard drive.
Can anyone help with this?
I have never done an in-place upgrade, so I am a little confused. One very knowledgeable friend told me that the in-place upgrade essentially runs a Windows Easy Transfer, does a clean install, and unpacks the transfer file, all automatically. Is it true? Is there a difference between doing an in-place upgrade and just using Easy Transfer?
View 8 Replies View RelatedAs you're aware, Vista had the 'capability' to do a clean install using the Upgrade DVD.
You could boot from DVD, do a clean install, not validate, then when in Windows, go to the DVD drive and install again, this time doing an upgrade and then validate.
This seemed to be kosher as reported on many sites. I know people who did it and all was well. Their Vista PCs run fine, and are completely up to date with regards to SPs and updates.
So, for an Upgrade price, it was possible to do a fresh install...will Windows 7 have this capability do you think?
I own Windows Vista 64bit, and have ordered Windows 7 Professional 64bit upgrade. How do I do a clean installation of Windows 7 on a new hard drive?
View 7 Replies View RelatedI have Vista Ultimate installed today. I intend on buying Windows 7 Home Premium upgrade. I would like to install 7 on a new WD Caviar Black I just ordered as a clean install.
1) Is this possible or will Win 7 flag this as a new install because of the new HD and not let me proceed since I plan on buying an upgrade disk?
2) If not, what options do I have?
3) If I can do this, can I plug my old drive in as Drive D: or E: to transfer the data over?
