Can Use A Windows 7 HP ISO File For A Clean Install Of An Older Vista System
Sep 25, 2012
Compaq Presario SR5010NX
Celeron D processor 360
Vista Home Basic
512 MB RAM
120 GB HDD
Intel graphics media accelerator
DVD/CD w/Lightscribe
This system is so sluggish it either has multiple infections or is just overloaded given its puny 512 MB of RAM, so I can't really use the system specs utility at the moment.Since I'm working on a similar clean install for an ACER notebook which is Win7HP 32-bit, what are the chances that the .iso file I'm burning to DVD can also be used for this much older technology. I have no problem upgrading the RAM to its max, unless it's already at its max?
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
I am currently running an OEM version of windows vista ultimate 32 bit. I just bought an OEM version of windows 7 professional 64 bit. Will I be able to clean install and activate my new w7 even though I already have OEM vista installed on my motherboard?
Want to upgrade Vista Home to Windows 7 Premium. The workstation definitely has the horse power for Windows 7.But visiting computer shops, the upgrade options are cleared out or not available and they suggest a new install of Windows 7 Professional, they also say its cheaper than an upgrade $140 vs $250. Windows 8 is not an option at this time.I have very little data or software on the current machine with Vista,but do have Outlook 2010.Will a new install of Windows 7 clean out the hard drive and I'll need to re-install Outlook?
So I decided to upgrade my desktop and have completely replaced all of the hardware, however that's irrelevant. I currently have Windows Vista Home Basic on the system but was offered a copy of Windows 7 Professional for $30 from my university and wanted to know if I could install a clean copy of Windows 7 Pro on a system that has Windows Vista Home Basic since I know I cannot upgrade.
I currently have vista 32 and ordered a full version of windows 7 professional sp1 64-bit. The disk that came in the mail says "Reinstallation dvd windows 7 professional sp1 64 bit". Will this Reinstallation DVD allow me to do a clean install of windows 7 64-bit on my computer?
savvy, and am having troubles installing Windows 7 on my laptop. I purchased the software, downloaded the .iso file from Microsoft's site, then burned the .iso file to a disc. Once on the disc it showed a few different folders and a setup option. I launched the setup option, which brought up the install window for windows 7. I chose clean install because upgrade is not an option for the current version of vista that I have, and while it is copying the files, after about 3% it gives me the error code 0x80070241 and says something about not being able to copy all of the needed files and that some of them may be corrupted. I don't know if this is a problem with my computer or with the disc that I've burned.
as the laptops were installed up and until recently with vista, i want to know if my machine was first installed with vista and upgraded to 7 or had a clean install.
what I want to do: a clean install of Win 7 64 bit on the primary hard drive
the second hard drive is free to be used as a backup location during the clean install process
question: how do I backup all critical data to the secondary hard drive before doing a clean install on the primary drive? and then how do I reinstall the data from the secondary drive back to the primary hard drive with the new Win 7 64 bit system on it?
I have windows Vista business with SP1 installed on a Dell Latitude laptop D830. I have run Windows upgrade advisor , it is giving me clear signal to upgrade to windows 7 professional or ultimate. Now with so much news about upgrade problems occurring. Should I upgrade or do clean install? Also I want to know , if there is a difference between windows 7 upgrade and windows 7 full version? With windows 7 full version, Can I get the upgrade option also?
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
I did a clean install of Windows 7 Ultimate onto my Vista Ultimate Boot Camp Partition (on my MacBook Pro), rather than an upgrade install.
Windows 7 told me that it would move Vista to a folder called Windows.old or something like that.
Fine. After everything was installed, I used Disk Cleanup to delete that folder, and the space was recovered on my partition
But when booting into Windows 7, I get a boot menu that seems to indicate Vista is still there.
So my question is, can I simply delete Entry 2? Or is there other remaining stuff from Vista still on my drive somewhere that I should also delete? What is the drive "Active Boot Partition"?
I wish Windows 7 gave an option to do a clean install WITHOUT keeping the old system around...The whole point of doing the clean install was to get rid of all the accumulated junk and start fresh.
Which is better for an older computer? Vista or Windows 7? I've got a Pentium 4 3Ghz with 1.5GB of RAM and onboard graphics. Vista seems to be a little much for this old of a computer. Would Windows 7 handle the system better?
I do the Windows 7 Clean install and now I cant delete or add folder or file in to some folder or drivers they ask administrator permission. How can I change that and there is unknown security members also !!!!
I just bought a refurbished Dell desktop PC that came with Windows XP Home preloaded. I have bought the disc from Microsoft for Windows 7 OS and want to do a clean install on that PC.
When I put in the Windows 7 disc and restart the PC, the cursor will appear for about a minute flashing in the upper left hand corner of the black screen before the machine finally boots to Windows XP Home edition.
Things I�ve tried:
1.Reboot and hit F2 to check the reboot order which is already set to do �Onboard or USB CD-ROM Drive� as the first choice.
2.Reboot and hit F12 to see if there are any other options that make sense (which don�t to me).
I am unable to log into my laptop I am using an older Dell with Vista SP2 now.and evidently having trouble with this keyboard.running windows 7 64bit SP1
I accidently set it up that I would have to log in .I haven't found a solution to remove this until last night through a "tweaker" I found.Unfortunately I can't remember the name. They had an option to remove this password which I clicked on. When I tried to log on tonight the log in was still there and on top of that my old password did not work.
I have bought the upgrade win 7 pro 64-bit (download through digital river) and have also got the back up disc from them which just came in the mail. What i need to know is exactly how do a clean install on a new system with the upgrade that is a download. I have looked online and found a ton of answers for this, but does anyone know which way is the easiest and safest way to do this in my particular case? Has anyone done this and confirmed it will work? I just don't want to mess something up.
eway with Windows Vista x64 and want to upgrade to Windows 7. I've been trying to figure out how to do it by following along to another thread in here but as BarefootKid mentioned, it is probably best that I start my own threadAfter I install Windows 7 and it completes and reboots it takes me to system recovery but it is the system recovery for Windows vista. I've been trying different things like formatting the partition right before the install and making the partition that Windows 7 is going to go on "active" in the .cmd prompt. I keep going in circlesinstalling Windows 7, getting system recovery and eventually choosing to reformat from Gateway's manufacturer settings...although once I do this I can't actually get back into Windows Vista as that now seems to be messed up. (I don't have the original Vista installation cd). Then I try rebooting and installing from the Windows 7 cd again to try more techniques to get it to work...I'm at the point of possibly deleting the recovery partition because the Vista remnants seem to be on this partition and taking over once I install Windows 7.
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
Doing clean install for Windows-7 64bit but over 3/4 of the way through while in "completing installation" phase computer shuts off completely. Before turning off gives error msg "... windows has encountered problem and could not complete the installation..". Have Gigabyte GA-P35-DS3L v2.0 motherboard/ 4GB GSkill RAM/Intel-e8400 processor. Wondering if it's hardware driver issues or BIOS problem.Tried turning off all peripherals in BIOS but no success.
I want to do a fresh install of windows 7 on an SSD for a new pc i'm building. I've been using an asus laptop that came with an OEM windows 7 without any physical disks but with the product key on the bottom of the laptop. Is it possible for me to reuse that key somehow via phone activation or another method for a fresh install on another computer?
I have 2 hard drives, the first has Win 7 RC1 and the second has XP and Vista in their own partitions. The Win 7 boot loader gives me the choice of Windows 7, Vista and XP when I boot up. The question is: If I install Ubuntu onto the second HD in a currently unoccupied partion, will GRUB (which is sure to take over the booting process, from past experience) still leave me with the 3 choices I have now (assuming I do not select the Ubuntu prompt). I wwould hate to lose the ability to get into the 3 Win systems !
My system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
I read various posts on different area's regarding chipset installation and drivers.Some info : motherboard is Microstar p45 platinum gamer series.it comes with 2 sets of cd's #1 for win xp intel chipset drivers&utilities disk.#2 chipset disk for vista.question #1 does windows 7 64bit (pro) contain the sata drivers and all the utilities for install ? or do i need to utilize the preinstall of the f6 and make a install floppy? msi has a section for downloads I have searched for the uptodate drivers listed in the arcive section where my board is now listed. am a bit confused as to how i am going to install win 7 on this system .I may go with a xp/7 duel boot .I want to add raid 5 after 7 install and i know xp could not see anything beyond raid 0 or 1.ooking for some advice before i start the process.I hope the thread title is better this time.if the install sequence works the way i want it to go ; perhaps i can create a tuit.
I am looking for scanning software for an older scanner. On the front it is labled HP scanjet ADF. On the back it has a model #of C5195, however there is serial # sticker that shows a # C7670A. I couldn't find either of these model #s listed on the HP website. Were can I find software for this scanner.
Old post, look for more info. Okay, boopme directed me to here, how do I preform a system file check without a windows 7 install disc handy? I have oem, so is all the win7 computers on my property, am I sunk?
I am trying to find a way to install an older recipe software that my mom has been using for years, Key Home Gourmet for Windows (1994 Softkey International). She just replaced her computer which had Windows Vista with a new Dell which has Windows 7. She has over 500 recipes backed up on an external drive. I have tried using the compatibility wizards and other compatibility settings but keep getting the same message that "the version of this file is not compatible with the version of window you are running." There are no newer versions of this software.
