For the past 2-3 months I've been receiving the same error in Windows Update every time I try and update: Error 80246008. I've tried the Microsoft Fix It application and the same problem occurs. I took a look into the services and when I try to start one service required by Windows Update it always fails because its core services are not launched, so I tried to launch those and those won't even launch.
[URL]
The Window Updates fail with error 80070308.
System:
Win7 x64 + SP1
Updates that failed:
KB2570791
KB2536276-v2
KB2539635
KB2572077
KB2518869
KB2586448
KB2556532
KB2560656
KB2552343
Things that I've tried but failed: (also good for others to try these first)
1) Reset and re-register Windows update (link)
2) Clean boot
3) Download and manually install the updates one at a time (Fail with no error code)
4) System Update Readiness tool
5) Use .NET setup verification tool (.NET ok) (link)
6) Elevated cmd -> sfc /scan now (verfication ok)
I keep getting this error, and following Error message when you try to install a Windows update, a hotfix, or a service pack after you perform System Restore in Windows Vista: "0x80071A91" and removing files manually did not resolve the problem[CODE]
View 5 Replies View RelatedMy windows update says it has 55 important updates but when I attempt to update it says that the updates were not installed and gives the error code 80246008. The windows help and support tells me I need to change or restart the background intelligent transfer service (BITS) but it isn't in the list of services that it directs me to. The microsoft fixit and automated troubleshooter fixes have both failed to help and I'm a bit worried this is a symptom of a real underlying problem.
View 1 Replies View Relatedget this error when i try to update, also 25 important updates didn't install when i tried. i also can not locate the BITS (Background Intelligent Transfer Service) in the services window, i know that a lot of people have had this issue but no fixes have been seen.
View 6 Replies View Relatedseeing as it had infected my services.exe, part of the fix was to get a new copy of it, or something around those lines; this will come in to play later, I think. Anyway, its been a LONG time, my last update whenever I try running windows update, it runs for a bit and tries to receive the updates, but then stops and displays a message saying it failed to update, and gives me the error code of 80246008. I've looked this up, and I see that it possibly has something to do with the background intelligent transfer service.
View 8 Replies View RelatedFor several months I have had problems each day when asked to install "Windows Updates", some days I get 4 or 5 updates or more, for a long time it installed all except one. This has now expanded so I have three updates that will not install for some reason. It creates a restore point then tries and fails each time. I am using Norton Antivirus and have even disabled that, but I still can get the updates to install. I have never had this problem before. I also have a laptop and another PC computer that has done these updates, so why problems with this one? It's driving me crazy.I am enclosing a copy of the error message I get together with the list of failed attempts (only recent ones).
[code]...
I have been trying for the last week to install Windows Updates KB976932 and KB2653956. I have received error codes 80246007 and 800B0100. For error code 800B0100 it was recommended that I install the system update readiness tool. I tried to install but I was unable to. For error code 80246007 it was recommended that I change or restart the Background Intelligent Transfer Service (BITS). I am still unable to to install these two updates.
View 1 Replies View RelatedAfter battling massive BSOD all day yesterday, I did a complete factory reset, and many other things which have stopped the BSOD. Unfortunately my CPU is still completely freezing up at random times.
I figured updating all the windows updates, but i'm unable to. I keep getting error code 800B0100 when I try to DL them. I get the x64 Windows Readiness Tool download. I downloaded that and even that has failed to install. I'm not sure what the issue is.
Running windows 7 Home Premium x64 based PC.
Windows Update reports that Administrator Permissions are needed, However I AM the Administrator and AM logged in as the Administrator.
View 2 Replies View RelatedFor the past 18+ days I've been unable to download and install updates on Windows7 x64. I've tried all the trouble shooters and the update readiness tool, I've sought and received advice from windows answers to no avail, 14 days ago it did allow some updates but now its insists that IE9 on IE is not downloaded when I can see it is and all the time I keep getting Error Codes 80073712 and 9C48 , I've attempted and failed on at least 21 times now and every time it looks like it may make it but then it fails.
View 9 Replies View RelatedI boot up windows 7 one day and my disk drives virtual and physical are missing. I try to use windows update to fix it and it manages to find the driver update and start installing it but it fails to actually install it leaving me with what is shown in the image. Why won't windows finish installing the drivers?
View 8 Replies View RelatedJust finished installing Win 7 64 bit on my Dell Inspiron 1545. It appeared the update was going along smoothly until it came time to reboot. After rebooting, the laptop showed that it was configuring Windows. Once the configuration was completed the system went into Startup Repair. Once completed and checking the Repair Details it shows a message indicating that ci.dll is corrupt. I was able to restore the computer to original state, but once I downloaded the 80 or so win 7 updates, I get the same problem.
View 2 Replies View RelatedWindows keeps alerting me it was unable to install the updates after I have downloaded them and was told to restart the computer.
View 4 Replies View RelatedMy wifes computer has been acting up for about a week now. IE 8 is not loading properly and is crashing. I am unable to connect to MSE to get updates or to Windows to get updates. I have run Malwarebytes and Emsisoft and neither one can find a bug. Chrome works for a while and the she gets the AW SNAP message.
View 26 Replies View RelatedUpdate readiness tool - finds missing files. ================================= Checking System Update Readiness. Binary V - Pastebin.coThis pastebin was after I was able to find most of the files, except for the few listed as missing now. ================================= Checking System Update Readiness. Binary V
View 2 Replies View RelatedI installed windows 7 ultimate 64 bits, I do all updates including sp1, and it appears one last update that is IE 9 but on optional. It seems that it install, when I restart pc windows is installing ok, but when it restarts it started installing and reverting changes with error. I already downloded the file and its is the same. I do reset updates and is the same.
View 4 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version:
Processor:
Processor Count:
RAM:
Graphics Card:
Hard Drives:
Motherboard:
Antivirus: None
I cannot install important updates not sure about much about my laptop apart from its a toshiba satellite pro on windows 7 an when i tryed to install them this code came up code: 80240016.
I have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
I have toshiba sata HDD. when i install windows with bios sata config as AHCI.. the installation process goes uptill completing installation and when the system restarts it gives me a error saying " an error occurred while trying to load Bootconfiguration data. with error0x000000e or some times 0x000000f when the bios is kept under IDE for sata .. there is no such error but installation halts at completing installation.
View 1 Replies View RelatedI'm trying to install Windows 7 64 bit on one our computers that had XP 32 bit. I'm doing a clean install and have already formatted and partitioned the hard drive. The problem I'm having is that now it won't let me install windows 7. When you highlight the system partition it shows and error, which states, "Windows is unable to install to the selected location, Error: 0x80300001" I thought I might need a SATA driver for the hard drive but I haven't been able to locate the right one if thats the problem.
View 6 Replies View RelatedLoaded 7Ultimate and got to Install screen. Selected drive and made new partition. Clicked next. Received error: Quote: Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more info. I don't know how to get to the logs, but what does this message mean? I have tried almost 6 or 7 times and even once with my 7 Home edition disk. Ran the startup repair a couple times. Tried formatting the drive from my XP Pro sp3 disk.So now here's where the real problem comes in: ERROR LOADING OPERATING SYSTEM. Now I can't get back into XP! Tried booting from ERD Commander 05, but I get an error code 4096 with that, and "File SETUPREG.HIV could not be loaded".How can I get XP back to booting properly? Maybe it's a faulty hard drive and needs returning. But it is extremely important that I get this computer back up and running immediately.
View 5 Replies View RelatedWindows Updates continues to re-install five specific updates which are:*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121) -Download size: 38.5 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368) -Download size: 1.8 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405) -Download size: 11.7 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827) -Download size: 4.3 MB.*Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) -Download size: 32.2 MB.- I purchased my computer 4 to 5 months ago. It is a Windows 7 Home Premium Hewlett-packard HP Pavilion dv6 Notebook PC (64-bit Operating System).
View 3 Replies View RelatedIm trying to install windows 7 64bit on my 160gb SATA HDD but gets an error saying....WINDOWS IS UNABLE TO INSTALL TO THE SELECTED LOCATION. ERROR: 0X80300024 i can install windows xp just fine.
View 9 Replies View RelatedI tried to dual boot Fedora 18 with my Windows 7. They are on two different hard drives. Fedora 18 worked but I was unable to boot up Windows 7. Frustrated, I decided to just delete everything from all the hard drives and try to do a clean install of Windows 7 using the USB-DVD Windows tool to make a USB Windows 7 installer. I then got the following error when trying to install Windows onto my hard drive:
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I tried unplugging the other hard drives and got the same error. I also went to the command prompt and used Diskpart and did clean all. Still the error shows up. Something that might be useful is that when I did disk list in the command prompt it showed my hard drive but with 0 free space. Not sure if this is useful but the drive I want Windows 7 on is a solid state drive but the one I had Fedora on is a normal hard drive and I had an extra harddrive that I used for storage that is a normal hard drive as well.
I'm having a major virus/malware issue as my McAfee firewall protection stopped working suddenly. Called McAfee to reinstall the virus software and they were unable to install it. They said that since my Windows Update feature is not working (there is a big red X and updates are not downloading and installing) the McAfee installation is failing. Asked me to fix this issue first and then try McAfee installation.
View 4 Replies View RelatedOriginally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
View 2 Replies View RelatedI had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies View RelatedI've been trying to get Windows 7 working for a couple days, without success. A friend of mine told me about this forum, so I figured I's try my luck and ask my fellow Windows users.
I have a valid, working copy of Windows 7 build 7000x32 on disk. The same disk has been used on other computers and works fine. However on my machine, it begins the installation just fine, until it reaches the blue Windows 7 background screen. Then it stops. No error, it just stops working.
Has anyone else experienced this problem? I find it extremely frustrating.
I have been unable to get my windows updates since early September 2011.I have tried various fixes including MS fixit to no avail. Error code 80096001.
View 2 Replies View RelatedI am trying to install with the downloadable executable from the student discount program, the files are located on an external hard drive.
I downloaded Windows 7 last night and started the install, it got up to the point where it checked for Vista SP1 and stopped. I had reinstalled Vista recentely and forgotten to install it.
I quit the Windows 7 install and installed SP1 for Vista. Now every time I try to launch the Windows 7 install I get the following error:
"The unattend answer file contains an invalid product key. Either remove the invalid key or provide a valid product key in the unattend answer file to proceed with Windows installation."
I tried deleting the temp file that was in the same directory as the install files for Windows 7 as well as deleting the expanded set up directory and letting it re unpack the files.
