2 Windows Updates Not Installing, .NET Framework 4 Issues
Jan 15, 2013
I have 2 windows updates that haven't installed for about a month now. Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656351)
Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) I don't have a clue why but everything installs fine. I install them, restart my computer and everything does its thing while that's happening and they just pop up again when I do a search for updates after computer has restarted.
View 1 Replies
ADVERTISEMENT
May 29, 2012
So I had automatic updates that installed when I was AFK.Came back, restarted. Within a minute, blue screen.Restarted again, blue screen.Went into safe mode and did system restore.
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.768.3
Locale ID:1033
Additional information about the problem:
BCCode:f4
BCP1:0000000000000003
[code]....
View 6 Replies
View Related
May 12, 2012
I have been really choosy in downloading Microsoft Updates and most of the time I only install updates like "update for microsoft windows 7 and security updates for windows 7". Do you guys install the .Net framework 4 updates? and is it really necessary?
View 9 Replies
View Related
Dec 23, 2011
Windows Update no longer working. Cannot update .NET Framework or install security updates. Get persistent bluescreen errors related to PFN. Now experiencing Internet connectivity issues even though network hardware appears to be operating fine. Current anti-virus does not detect any issues. Can't reinstall my Windows 7x64 upgrade or SP1 - because cannot install updates. Ready to rebuild ground-up with new Windows 7 disk.
View 2 Replies
View Related
Jul 1, 2011
i cannot install .net framework 3.5 SP1 on win 7 it shows downloading then suddenly finishes the installation and gives SETUP ERROR
View 2 Replies
View Related
Mar 1, 2012
I have some updated software that requires .net Framework 4 to run.I use this on an older laptop that I have not ever used on line. By never going on line, I think this is the greatest virus protection ever. Anyway, to install the Framework 4 from Microsoft, one of the requirements is to be on line, which I do not want to do. Is there any way to install this Microsoft software without hooking up on line?
View 2 Replies
View Related
Jan 16, 2013
Trying to install MS .Net version 4 on desktop PC.Running the 64 bit version of Windows 7.Get the following error msg.:.NET Framework 4 has not been installed because:HRESULT 0xc8000247
View 1 Replies
View Related
Sep 3, 2010
How do I installing something during the Windows Setup Menu's Installing features and Installing updates?
View 3 Replies
View Related
Dec 25, 2009
I downloaded "dotnetfx35" from the Microsoft web site on my Windows 7 64 bit PC. When I double clicked on this file, it said it was extracting files, but I did not see any window popping up to show that the .NET framework is being installed. Now, I see a Microsoft.NET folder in the Programs in the Programs (x86) folder on my C drive.
However, I do not see MIcrosoft .NET Framework 3.5 SP1 in the Start>Programs menu or in the Add/REmove Programs list in the Control panel. Am I missing something? How can I verify that .net framework has in fact been successfully installed?
View 3 Replies
View Related
Feb 20, 2013
i am required to install .net framework v2.0 so that my vodafone dongle will work, i have installed 3 different packages of the v2.0 and the dongle still does not run,sometimes i am told the v2.0 is already installed, yet not being picked up.
View 2 Replies
View Related
Aug 24, 2012
I did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.
View 9 Replies
View Related
Oct 28, 2011
I have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.
View 4 Replies
View Related
Feb 13, 2012
Windows notifies me that there are updates available. When I select to install the updates it takes a long time and I get a message stating that windows has detected that my computer is running on battery power and to plug my computer into an outlet.I get this message even when my computer is plugged into an AC outlet at the beginnig of the update dowload attept.What could be the problem? I had to have Windows 7 reinstalled on my computer by someone at a local charitable company but I've noticed little weird things that didn't happen when I had my original version.Internet sessions closing suddenly and cursor skipping around the page eventhough I updated my touchpad drivers.
View 1 Replies
View Related
Dec 9, 2012
I keep setting Windows to 'Check for updates but let me choose ...' but it keeps changing back to 'Install updates automatically'. Usually I notice this as the updates install or I see the messages that the updates were installed.
View 2 Replies
View Related
Sep 14, 2012
I'm rebuilding my desktop PC with a fresh installation of Windows 7 x64.Upon first boot after installation, 3 updates automatically installed. After a reboot, I was informed that over 100 additional recommended updates (and quite a few optional updates) were ready to be installed.I chose to install all of the recommended and optional updates (except for the 39 international updates).During the Windows Update installation process, a Microsoft Mouse and Keyboard Center installation window appeared. When the progress bar got to about 75%, however, the following error dialog appeared underneath: Microsoft Visual C++ Runtime LibraryThis application has requested the Runtime to terminate in an unusual way Presumably, the installation of the Microsoft Mouse and Keyboard Center (and perhaps other items) failed to install; upon pressing the OK button, I was informed that 51 updates succeeded and 75 failed. Codes 800706BE 800706BA were mentioned.Upon reboot, another batch of updates (75?) installed; then the PC rebooted twice.At this point, Windows 7 appears to be completely installed and up to date. There are no new items in Windows Updates. However, the Microsoft Mouse and Keyboard Center is nowhere to be found; I was able to download the installer and successfully install the product.
View 5 Replies
View Related
May 27, 2012
Windows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question
View 4 Replies
View Related
Jul 30, 2009
I have managed to achieve the BSOD quite a lot, and have tried re-installing Windows 7 x64 on my computer three times today.
I have received the BSOD:
after trying to reformat my F: drive.
Uninstalling my Nividia drivers for a new one
After using Firefox for a while it just won't open and BSOD follows shortly after
I believe after installing Windows Live applications it startes to give me BSOD
After the first BSOD I start to get the error message:
Check filesums or somehting about the computed sums is not correct.
View 2 Replies
View Related
Dec 15, 2011
Last night I received a message that Windows needed to download updates. There were seven of them, so I clicked on install. After downloading it said it had to restart to complete the installation. I then got the screen saying "Configuring Windows. Do Not Turn Off Your Computer." The little circle kept spinning for about a half hour. I saw that the HD light didn't come on at all, so I assumed it had locked up. I had to press and hold the power button to get it to reboot, and after telling me Windows did not shut down normally, it started up and appeared to complete the update installation.I checked the Update History and most of the updates said "Successful" but a few said "Pending". I have had this lockup happen before, but usually it installs with no problem. What can I do? What does Pending mean? I have Win 7 - 64 bt - Service Pack 1.
View 5 Replies
View Related
Jul 1, 2012
I have a dual hard drive system. When I attempt install windows 7 from the disk, I can do it and then install some programs, but windows ask to install important updates. Once it does this it always crashes and I can't boot into windows anymore. The repair windows 7 install does NOT work. Neither does the restore to a previous time work. Does this indicate that the hard disk is defective? I have used the western digital tool and it tested fine.
View 5 Replies
View Related
Jun 19, 2011
I'm running Windows XP 7 on a HP EliteBook 8440p laptopI installed three updates, including the latest Windows 7 Service Pack and now my computer will not start up again. The Startup Repair tool is detecting no errors. The system restore tool warns me that my diagnostic power is low and a restore can not be reversed. I ran a chk dsk and no errors were found and fixed there either.
View 8 Replies
View Related
Jan 26, 2012
So first I get this message when I mouse over the speaker icon(notice the red "x" on the icon).When I click the icon, Windows does a diagnostic and then this shows up.This is whats listed in my playback devices and this is with "Show disabled devices" enabled. Everything is enabled,Here is a picture of what my device manager looks like.
I've tried installing drivers for my sound card and my chipset, I tried restarting my computer, updated from my device manager, uninstalled drivers, reinstalled, etc. I've been searching online for a bit and nothing I found worked so I figured I'd give this a shot. I tried uninstalling the service pack update but that didn't work.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, x64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 3198 Mb
Graphics Card: NVIDIA GeForce GTX 460, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 300816 MB;
Motherboard: Gateway, G33M05G1
View 6 Replies
View Related
May 12, 2011
Every time I turn on my pc I do have a message Do not turn of your computer Windows installing updates after a while I do have second message 0% Update completed after a while the third message appear Windows Update Failed, Reverting Files, do not turn off your computer after that I see the Welcome message then Windows starts normally. I do have Windows 7 Pro 64 bit, that happens every time I switch on my pc, my updates are:Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175) [code]
View 2 Replies
View Related
Oct 15, 2011
I have Windows Vista Home Premium 64-bit OEM (with free Windows 7 upgrade). I want to reformat the computer. After installing Vista, do I need to download Vista updates, before installing Windows 7? Or just immediately install Windows 7 after Vista? Also, how often do you do a fresh install (reformat)?
View 2 Replies
View Related
Apr 14, 2012
Alright, so after updating my pc a few days ago and managing to install SP1 for windows 7, my computer now constantly "downloads" information which results up to 100's of mb's per hour wasted.. and thus having a limited cap amount, I need to find a way to stop it. Why I say this now, is because ever since I updated windows 7, so the "downloading" has started and it never used to do this before.I have told windows to not start up apps like iTunes and Skype etc. But this hasnt had a effect. Is there anything else I can do to stop this?
View 4 Replies
View Related
Apr 22, 2012
When i plug in a new usb device, windows is supposed to look for updates to install the device right ? well in my case, it doesn't and i'm not able to access the pen-drive. On the other hand, if i try toplug in an old and previously used pen drive, it works perfectly.
View 1 Replies
View Related
Jul 12, 2012
I'll be ecstatic if this could be solved. After installing windows updates my pc no longer boots. It turns on with some beeping noises and then is just stuck on a black screen where I can move the mouse cursor around to my hearts content but cannnot do anything else as it doesn't boot any further. I am not sure if I still have the windows disc as I upgraded from vista many a moon ago but it maybe here somewhere.It doesn't give me the option to run in safe mode, do any sort of system repair or go to the BIOS screen due to the fact it doesn't boot up that far.
View 4 Replies
View Related
May 18, 2010
Every time I shut down, Windows Update installs the same 2 updates. It never gives an error message saying that the install failed. It just insists on doing it again. This is the update from last week, I guess. I'm afraid I'm at work and away from the affected computer. It's not critical, it's just annoying, bc shutdown now takes too long.
View 8 Replies
View Related
Apr 27, 2012
My computer was working fine until I downloaded the windows service pack 1. First it was every now & then but soon my computer was freezing up ( not responding ) and it was impossible to even complete a document. This happens in all applications. I noticed with each new window update the worse my computer got. Still under warranty I spent hours on the phone with DELL twice, finally I did a fresh re-install of windows 7 professional. After the fresh install everything was fine. UNTIL I downloaded the windows updates, it started to 'not respond' again. I uninstalled the updates. The not responding issue is gone but I am concerned about windows security updates. Do I need them? I have contacted windows about this issue many times over the past several months with no response.
View 3 Replies
View Related
Jan 30, 2012
I installed 285.62 P08 Nvidia Driver from the Dell webpage two days ago and it was fine and everything was good after the restart from the installation. After finishing up my session, I noticed that there is a window update so I shut down and left the computer to do the updating on it's own. Today, I switched on my computer to look at my timetable for today and after that put it to sleep mode.
After "waking" it up, I was met with a BSOD after like 5 minutes of use. I then decided to system restore to before i did the updates. It still BSOD albeit it took a longer time before that happened. Right now im using Safe mode + Networking to type this message out. (The computer does not seem to BSOD in safe mode so far). I did the steps listed but I could not get the perfmon step working. "An error occurred while attempting to generate the report".
Specs:
Windows 7 64bit
OEM
About 7 months old both hardware and the OS
I triggered a BSOD in normal mode:
KERNEL_DATA_INPAGE_ERROR
STOP: 0x0000007A (0x0000000000000020, 0xFFFFFFFFC000009D, 0xFFFFFA800798E078, 0x0000000000000000)
Physical Memory Dump FAILED with status 0xC000009C
View 3 Replies
View Related
Mar 29, 2012
When windows updates, it then reboots, and just hangs on the 'starting windows' screen. Only after it updates, works fine before. I've re-installed it many times, but get the same result. This never used to happen until i did this fresh installation today. Now it happens every time, just after it installs some standard updates, it wont boot up..
View 1 Replies
View Related
Jul 16, 2012
Just purchased a new MOBO and some other new hardware a couple of weeks ago. I am using the same Windows 7 Pro copy I had on my previous mobo and HD. After I installed Windows 7 Pro onto my SDD (with a HD as my secondary storage), I was getting BSOD and SP1 would not install (but other updates would prefectly fine). I re-installed (cleanly) Pro a couple of days ago. Now, barely any of the updates work. There are various failure codes, such as the ones in the title--and no distinct problem.
I was able to download some updates by only selecting 1-3 at a time. However, with 118 updates...I eventually lost my patience (plus, sometimes a few would still fail even at only 1-3 at a time).
The failure process at first was at the download stage - the progress would freeze randomly at 7% or whichever. After several more attempts it got through to the installation phase. Now installations randomly stop at a random file. Upon restart, Windows fails to configure updates and nothing is accomplished.
Now a weird thing is, that with some of my larger files (2+mb), I will sometimes see like 5.1mb - 10mb for the listed file size. Also, on my main Windows Update screen (the one which lists how many important and optional updates you can download), it says "79 important updates selected, 236.2 MB - 1,059.8 MB."
I have tried:
-FixIt
-Deleting all temp files
-Deleting DataStore
Random Specs:
Windows 7 Pro
ASUS P8Z77-V Pro
Samsung 830 64GB SSD
View 4 Replies
View Related
