BSOD After Installing Nvidia Drivers And Windows Updates
Jan 30, 2012
I installed 285.62 P08 Nvidia Driver from the Dell webpage two days ago and it was fine and everything was good after the restart from the installation. After finishing up my session, I noticed that there is a window update so I shut down and left the computer to do the updating on it's own. Today, I switched on my computer to look at my timetable for today and after that put it to sleep mode.
After "waking" it up, I was met with a BSOD after like 5 minutes of use. I then decided to system restore to before i did the updates. It still BSOD albeit it took a longer time before that happened. Right now im using Safe mode + Networking to type this message out. (The computer does not seem to BSOD in safe mode so far). I did the steps listed but I could not get the perfmon step working. "An error occurred while attempting to generate the report".
Specs:
Windows 7 64bit
OEM
About 7 months old both hardware and the OS
I triggered a BSOD in normal mode:
KERNEL_DATA_INPAGE_ERROR
STOP: 0x0000007A (0x0000000000000020, 0xFFFFFFFFC000009D, 0xFFFFFA800798E078, 0x0000000000000000)
Physical Memory Dump FAILED with status 0xC000009C
Trying to do a clean install of Windows 7 Ultimate on brand new pc .
Initially I got quite a way through the installation then it came up with an error saying the computer closed unexpectedly and had to restart to continue installation. I had got my monitor connected to the nvidia gt 9500 via divX.
Said Ok, pc shut down, then restarted with exactly the same message. Read up on the Net and said that it could be the nvidia card, so got to device manager and removed drivers so it had to use standard vga drivers and switched to the vga connection on the graphics card (I dont' have onboard graphics on my motherboard).
Well, now it doesn't have the old problem it has a new one. I am booting straight from the dvd drive and it lets me get to the Windows install page, I select custom install and it gets to anything between 2 and 72% of expanding the files (second stage on list) and then it blue screens with various errors. the last one being this:
fltmgr.sys address 81851844 base at 81848000. Datestamp: 4a5bbf11
Have tried ringing the tech support from where I got the pc but they say they don't support windows 7 yet. CD that has come with the pc for the motherboard says that it is windows 7 ready (but that probably doesn't mean anything).
Intel® Core 2 Quad Q8300
Motherboard: Asus P5P43TD (Intel P43 chipset, 4x DDR3, PCI-E 2.0)
When i plug in a new usb device, windows is supposed to look for updates to install the device right ? well in my case, it doesn't and i'm not able to access the pen-drive. On the other hand, if i try toplug in an old and previously used pen drive, it works perfectly.
I was running both x64 & x86 version of Windows 7 RC1 build 7100 quite well till now.
I downloaded the images from MS.
Today suddenly my x64 gave the BSOD..
At the end of BSOD some ACPI error is mentioned
I downloaded the new updates & system was installing them when BSOD occured...
The strange thing is that I tried to repair thru every possible means from safe mode to EMS & by starting from the DVD but it failed.(Every try ends at BSOD)
Now the problem is When I try to boot from the x64 DVD(from which I installed) after "Loading files" the BSOD comes when screen says Windows Starting. Even before the glowing animation!
I disconnected my all HDD drives but still no success.
This combination of drivers works fine in windows vista 32 bit.. boots up fine and everything. Today I finally got my SSDD for my OS and a copy of Windows 7 64 bit. I installed it fine without error. Then installed my chipset drivers that I downloaded off of Nvidia's website (64 bit, worked fine, rebooted), installed my nvidia display drivers, rebooted.. now whenever I start windows up. I get the flowery blue background windows logo. It just hangs there and never boots. However it will boot fine into safe mode and after I uninstall the display drivers... though my gaming computer is going to be pretty useless if I can't game with it!
Relevant Info Windows 7 64bit Asus Striker II Formula (with 15.58 64 bit drivers installed) 2x SLI EVGA Geforce 560 TI 448 Special Edition (with64 bit 310.90 Drivers Installed)
I am going to try installing the motherboard chipset drivers from Asus's website. I believe the version number is 15.43, then try reinstalling the video drivers. However I don't think this is going to make much a difference.
I am building a new computer and have all the parts except for my video card (gtx 670 when it comes in stock...). Now, I have heard that I shouldn't do windows updates before installing the drivers for my video card. However, if I go ahead and set everything up except for my video card and let windows update do its thing - will there be any problems for me when I can finally buy my video card and install it?
Well, I have this problem: After installing 64bit 186.03 (tried 185 too) NVIDIA drivers for notebooks (I have geforce 9200m gs) and restarting, windows just won't boot up. The screen goes black and then reboots without even showing the "welcome screen". I've tried this with 7100 and RTM builds (Didn't have any problems with xp though).
I am looking to sort out my graphics drivers for my new computer and just want to make sure I get it right and so avoid any kind of nightmare, I am sure some of you will be able to point me in the right direction....
I have a GTS250 card installed on my PC running windows 7 64 bit. It is currently using the standard windows drivers would have automatically installed when the computer was put together. I would like to change these to the proper Nvidia drivers so I can have the control panel and more control etc.
This is what I think I need to do: 1. Download correct Nvidia drivers and save somewhere 2. Uninstall the GTS250 device in device manager with remove the software option 3. Boot in safe-mode and run a driver cleaner thingy (which one is free and best??) 4. Restart and run the Nvidia install program
Is this correct? Is it necessary to use a driver sweeper? I have read that the generic driver can just be installed over but I am not sure about this. Is it the uninstall option that I need to use? I have also read that windows will automatically re-install the generic driver from a ‘store’, how can I stop this happening?
This is the second time that has happened to me, the first, well i had to reformat because i could not find a solution. When I installed new or older drivers for my nvidia 9800gtx, my vertical refresh doesn't turn off even though it says it is off. It is effecting me within games where i need it off. Any help?
I have windows 7 installed on a PC I built a little over a year ago. I recently upgraded to the windows 8 consumer preview, but I didn't like it so I'm trying to switch back. When I install windows it works fine, I can turn my computer off and on as many times as I want and it will be fine, but if I install any video card drivers or any of the updates that windows tells me to install, the next time it boots up I either get the windows splash screen or a black screen right after it says, "starting windows", and shows the 4 orb things that spin around and turn into the windows logo. It stays on this screen for 5-10 seconds and then continues to black or the splash screen. I have tried installing only my video card driver, I have tried installing only one of the recommended updates, but no matter what I install it doesn't work the next time it boots, so I don't think it's a problem with one specific driver. However I have selected only the ones that started with: important windows update, or something like that, none of the security updates or anything and those installed successfully. I have reset my bios and changed every setting I can think of, but nothing works. I have also completely formatted and re-patitioned my hard drive. I have basically reset my computer as much as possible without building a new one. What else can I do? I need to install my video card driver at the very least or I can't play games, which is the whole reason I built a PC
I recently bought an Nvidia 7200 GS graphics card for my computer, but it is causing problems. I plugged in the card and booted up, and it somehow found a driver for it (maybe on the driver cd I had inserted). I then enjoyed 20 minutes of dual monitors, but then I had to restart the computer.
Ever since, Windows 7 will not load. It displayed the startup animation, then promptly froze. I unplugged the card, and it booted up fine, and I downloaded the latest drivers from the manufacturer's site.
However, I cannot install them, because the it could not find any hardware for the drivers! How can I install the drivers in Windows 7, if I cannot start Windows with the card installed?
I am currently using Vista that I have installed on another hard drive. However, I don't know if even this will boot up again if the card is plugged in.
I recently build myself a gaming computer the specs are as follows: i5 3570k 16GB G.Skill 1600 Mhz ASRock Extreme4 Evga 750 Watt PSU Asus GTX 670 2GB
After I Installed all of the drivers for everything but the graphics card it was finally time for that and as soon as I downloaded the newest drivers from Nvidia and restarted my computer I immediately got into a reboot loop and any time I've tried going into safe mode to delete the drivers my computer restarts. On top of all of that there are these red vertical lines all over my monitor.
I was having a BSOD problem that ANTHONY pretty much told me how to sort out, I downloaded the driver for it and then I got a message saying "The contents of this file cannot be unpacked. The executable you are trying to run has been corrupted. Please obtain another copy of the file, and its integrity, and try again."
I did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.
I have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.
My computer was suffering from random bsods and viruses before. I atributed the bsods to viruses, but after reinstalling windows 7, I found that the bsods still happened. It seems to happen when installing drivers, or running prime95. Booting into safe mode allows me to pretty much do anything.
When crashing, it does a slow crash, where I can move the mouse around, but the startbar and any other programs dont respond. Explorer then crashes, followed shortly by a bluescreen.
Well, after deleting Windows XP, Vista and Ubuntu and reinstalling 7 (32bit) as a single OS I maybe resolved my problem with Sapphire HD 3650 not working on 7 but now, when I install Windows 7 drivers (weird, my agp card gets recognized with normal drivers) and reboot I get BSOD before entering the login screen of Win 7. Any help?
I have just picked up my custom build computer with windows 7 home premium x64. I installed a driver for my recording interface (lexicon Omega) so it can work with my music production software which is Reaper. Once i open reaper and create a new track, as soon as i go to arm the record button, a BSOD comes up. after i restart my computer, everytime i open Reaper my PC crashes with the same BSOD. I did a system restore and tried reinstalling the driver but the same problem persisted.
More info:
The BSOD message says: DRIVER_IRQL_NOT_LESS_OR_EQUAL
PC Specs: AMD FX 6100 8GB Ram ATI HD6850 Gigabyte 990FX
I got motherboard: Asus m2n-mx se plus. Video Card : nVIDIA nForce 6150SE (6100-430), Onboard Audio : nVIDIA MCP61 , D-Link DFE-520TX PCI Fast Ethernet Adapter .
My Motherboard comes with Vista drivers, but I heard that even that are creating problems for video and audio. Should I download any specific drivers beforehand?
Windows notifies me that there are updates available. When I select to install the updates it takes a long time and I get a message stating that windows has detected that my computer is running on battery power and to plug my computer into an outlet.I get this message even when my computer is plugged into an AC outlet at the beginnig of the update dowload attept.What could be the problem? I had to have Windows 7 reinstalled on my computer by someone at a local charitable company but I've noticed little weird things that didn't happen when I had my original version.Internet sessions closing suddenly and cursor skipping around the page eventhough I updated my touchpad drivers.
I keep setting Windows to 'Check for updates but let me choose ...' but it keeps changing back to 'Install updates automatically'. Usually I notice this as the updates install or I see the messages that the updates were installed.
I'm rebuilding my desktop PC with a fresh installation of Windows 7 x64.Upon first boot after installation, 3 updates automatically installed. After a reboot, I was informed that over 100 additional recommended updates (and quite a few optional updates) were ready to be installed.I chose to install all of the recommended and optional updates (except for the 39 international updates).During the Windows Update installation process, a Microsoft Mouse and Keyboard Center installation window appeared. When the progress bar got to about 75%, however, the following error dialog appeared underneath: Microsoft Visual C++ Runtime LibraryThis application has requested the Runtime to terminate in an unusual way Presumably, the installation of the Microsoft Mouse and Keyboard Center (and perhaps other items) failed to install; upon pressing the OK button, I was informed that 51 updates succeeded and 75 failed. Codes 800706BE 800706BA were mentioned.Upon reboot, another batch of updates (75?) installed; then the PC rebooted twice.At this point, Windows 7 appears to be completely installed and up to date. There are no new items in Windows Updates. However, the Microsoft Mouse and Keyboard Center is nowhere to be found; I was able to download the installer and successfully install the product.
Windows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question
Last night I received a message that Windows needed to download updates. There were seven of them, so I clicked on install. After downloading it said it had to restart to complete the installation. I then got the screen saying "Configuring Windows. Do Not Turn Off Your Computer." The little circle kept spinning for about a half hour. I saw that the HD light didn't come on at all, so I assumed it had locked up. I had to press and hold the power button to get it to reboot, and after telling me Windows did not shut down normally, it started up and appeared to complete the update installation.I checked the Update History and most of the updates said "Successful" but a few said "Pending". I have had this lockup happen before, but usually it installs with no problem. What can I do? What does Pending mean? I have Win 7 - 64 bt - Service Pack 1.
I have a dual hard drive system. When I attempt install windows 7 from the disk, I can do it and then install some programs, but windows ask to install important updates. Once it does this it always crashes and I can't boot into windows anymore. The repair windows 7 install does NOT work. Neither does the restore to a previous time work. Does this indicate that the hard disk is defective? I have used the western digital tool and it tested fine.
I'm running Windows XP 7 on a HP EliteBook 8440p laptopI installed three updates, including the latest Windows 7 Service Pack and now my computer will not start up again. The Startup Repair tool is detecting no errors. The system restore tool warns me that my diagnostic power is low and a restore can not be reversed. I ran a chk dsk and no errors were found and fixed there either.
So first I get this message when I mouse over the speaker icon(notice the red "x" on the icon).When I click the icon, Windows does a diagnostic and then this shows up.This is whats listed in my playback devices and this is with "Show disabled devices" enabled. Everything is enabled,Here is a picture of what my device manager looks like.
I've tried installing drivers for my sound card and my chipset, I tried restarting my computer, updated from my device manager, uninstalled drivers, reinstalled, etc. I've been searching online for a bit and nothing I found worked so I figured I'd give this a shot. I tried uninstalling the service pack update but that didn't work.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, 32 bit Processor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, x64 Family 6 Model 23 Stepping 7 Processor Count: 4 RAM: 3198 Mb Graphics Card: NVIDIA GeForce GTX 460, 1024 Mb Hard Drives: C: Total - 953766 MB, Free - 300816 MB; Motherboard: Gateway, G33M05G1
Every time I turn on my pc I do have a message Do not turn of your computer Windows installing updates after a while I do have second message 0% Update completed after a while the third message appear Windows Update Failed, Reverting Files, do not turn off your computer after that I see the Welcome message then Windows starts normally. I do have Windows 7 Pro 64 bit, that happens every time I switch on my pc, my updates are:Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175) [code]
I have Windows Vista Home Premium 64-bit OEM (with free Windows 7 upgrade). I want to reformat the computer. After installing Vista, do I need to download Vista updates, before installing Windows 7? Or just immediately install Windows 7 after Vista? Also, how often do you do a fresh install (reformat)?
