I was running both x64 & x86 version of Windows 7 RC1 build 7100 quite well till now.
I downloaded the images from MS.
Today suddenly my x64 gave the BSOD..
At the end of BSOD some ACPI error is mentioned
I downloaded the new updates & system was installing them when BSOD occured...
The strange thing is that I tried to repair thru every possible means from safe mode to EMS & by starting from the DVD but it failed.(Every try ends at BSOD)
Now the problem is When I try to boot from the x64 DVD(from which I installed) after "Loading files" the BSOD comes when screen says Windows Starting. Even before the glowing animation!
I disconnected my all HDD drives but still no success.
I have an NVIDIA 285GTX and a 580 GTX installed in my PC, with 3 monitors connected. If I use the 280.26 driver then everything is fine but if I install the latest driver 285.62 to enable me to play Battlefield 3 then I get a BSOD on boot up.
for 72 hours now im geting constant updates on windows update,windows even re instaled SP1 ...story goes my hdd broke down 3 days ago so i installed on a new hd win 7 home prem. x64 +sp1, since that time i had at least 5 hours of updates (inc. setup),funny thing is a friend did format on his pc today and we spend 3 hours updating (dont think he finished, instead he went to sleep) My q is (as stated above) is there a reason for the 34/72/4/3/2/1/silverlight new updates found????? did Windows 7 went unstable???its rly anoying (got some failed updates to)until 3 days ago i had no probs.
I installed 285.62 P08 Nvidia Driver from the Dell webpage two days ago and it was fine and everything was good after the restart from the installation. After finishing up my session, I noticed that there is a window update so I shut down and left the computer to do the updating on it's own. Today, I switched on my computer to look at my timetable for today and after that put it to sleep mode.
After "waking" it up, I was met with a BSOD after like 5 minutes of use. I then decided to system restore to before i did the updates. It still BSOD albeit it took a longer time before that happened. Right now im using Safe mode + Networking to type this message out. (The computer does not seem to BSOD in safe mode so far). I did the steps listed but I could not get the perfmon step working. "An error occurred while attempting to generate the report".
Specs: Windows 7 64bit OEM About 7 months old both hardware and the OS
I triggered a BSOD in normal mode: KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A (0x0000000000000020, 0xFFFFFFFFC000009D, 0xFFFFFA800798E078, 0x0000000000000000) Physical Memory Dump FAILED with status 0xC000009C
My wife is running a Toshiba T110-11U and this is now frozen at update 10 of 15 from the latest batch of patch Tuesday updates. OS is w7 64 bit home premium. Has been trying to install this update for more than 8 hours!
I was as is usually the case yesterday, to accept 8 important updates when I cam to close down my PC. I did this and after a while it closed down no problem. However, today upon starting, it was saying "preparing desktop" and it was as though I had done a clean install with all my icons gone from the task bar, and no wallpaper appearing either? I have since read online that other people were having problems including BSoD etc?! I have since using system restore, gotten it back to normal although I have had to ignore the updates again so as not to end up at square one?!
Latest Windows 7 updates disable my graphic card, Radeon HD 6450 and Catalyst Control System. How can I update without having it affecting my graphics card?
these latest Updates have caused my various folders...music, downloads, images, docs....all my self made folders to disappear from the desktop. In addition Windows reverted back to default settings, I lost all my Firefox favourites and FF wasn't recognised anymore as my default browser, Windowes themes all reverted to default....basically a big scramble and mess. I did system restore and am back to normal...but Windows still wants to update.
What should I do? These updates are messing my PC up...but the updates are listed as 'critical'..
After the latest Win 7 updates on three of my computers, the CD drive does not read blank CDs. It gives an error message "Windows cannot read the disk in drive E:"etc, format the disk etc.I was always able to put a blank CD in the drive and see that it was blank or could copy files to drive. Now, it only gives me this message. I tried several different blank CDs. They work fine in my older XP computer.
I am using HP Pavilion dv6-7012tx with 2gb nvidia geforce gt630m graphics card.My driver version is 295.55.Recently when I checked for driver update in nvidia control panel it showed that version 301.42 is available & the nvidia website also showed that update is available for my graphics card.I downloaded it & when I started installation it said-"this graphics driver could not find compatible graphics hardware".
I installed a Realtek driver and now Windows Media Player doesn't work, I'm currently on a Packard Bell machine that I hadn't updated the Realtek drivers on before.
When I install it my resolution goes to like 640x720 or something like that and I can't change it unless I rollback the driver and I need the driver to play mine-craft.
So I just recently upgraded to Windows 7. After installing all the necessary drivers provided by Windows Update, It was time to install the one provided for the Graphics Card. Ever since I've got the driver set, there seems to be this flicker on the screen that tends to show up every few seconds.
I did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.
This combination of drivers works fine in windows vista 32 bit.. boots up fine and everything. Today I finally got my SSDD for my OS and a copy of Windows 7 64 bit. I installed it fine without error. Then installed my chipset drivers that I downloaded off of Nvidia's website (64 bit, worked fine, rebooted), installed my nvidia display drivers, rebooted.. now whenever I start windows up. I get the flowery blue background windows logo. It just hangs there and never boots. However it will boot fine into safe mode and after I uninstall the display drivers... though my gaming computer is going to be pretty useless if I can't game with it!
Relevant Info Windows 7 64bit Asus Striker II Formula (with 15.58 64 bit drivers installed) 2x SLI EVGA Geforce 560 TI 448 Special Edition (with64 bit 310.90 Drivers Installed)
I am going to try installing the motherboard chipset drivers from Asus's website. I believe the version number is 15.43, then try reinstalling the video drivers. However I don't think this is going to make much a difference.
I have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.
Windows notifies me that there are updates available. When I select to install the updates it takes a long time and I get a message stating that windows has detected that my computer is running on battery power and to plug my computer into an outlet.I get this message even when my computer is plugged into an AC outlet at the beginnig of the update dowload attept.What could be the problem? I had to have Windows 7 reinstalled on my computer by someone at a local charitable company but I've noticed little weird things that didn't happen when I had my original version.Internet sessions closing suddenly and cursor skipping around the page eventhough I updated my touchpad drivers.
I've a customer who simply cannot install all updates. In in the end, he decided to try the upgrade route in an attempt to fix the updates not installing. He got hold of an ISO (without SP1) and started the process. At about 70% completion (I believe the OS components have successfully been installed) it stops. The error message states something about lack of disk space to install the applications (????).There's plenty of disk space of coursePrevious to the upgrade try, we've run various MS FixIt tools, SFC, disk check, disabling A/V, checking for malware, etc. Commonly, upon unsuccessful updates, the error codes are either 8007371b or 80073712.
I have now taken over the formatting of laptops at my work place. We buy and sell second hand laptops, so want to erase all data before we sell them. Everything is fine, but the updates take forever, and need you to be around to continually restart the computer numerous times. I downloaded WUD and downloaded every update at once, but still found that they could not all be installed at once (Unless I did something wrong), So I was wondering if there is some way you can install all the windows updates at once, as that would save me so much time, as some of the updates take forever to install, making the whole process a good 4-6 hour job sometimes.
KB2724197 - a 15KB update - constantly pops up as a new update on my Windows Update, despite having been installed several times. I have had no new updates now for some weeks, only this 15kb one shows up. I have downloaded the standalone version and used that, and tried to install it without my AV software running, but it still persists. It does not show up in the list of installed updates in Programs & Features.
I keep setting Windows to 'Check for updates but let me choose ...' but it keeps changing back to 'Install updates automatically'. Usually I notice this as the updates install or I see the messages that the updates were installed.
I'm rebuilding my desktop PC with a fresh installation of Windows 7 x64.Upon first boot after installation, 3 updates automatically installed. After a reboot, I was informed that over 100 additional recommended updates (and quite a few optional updates) were ready to be installed.I chose to install all of the recommended and optional updates (except for the 39 international updates).During the Windows Update installation process, a Microsoft Mouse and Keyboard Center installation window appeared. When the progress bar got to about 75%, however, the following error dialog appeared underneath: Microsoft Visual C++ Runtime LibraryThis application has requested the Runtime to terminate in an unusual way Presumably, the installation of the Microsoft Mouse and Keyboard Center (and perhaps other items) failed to install; upon pressing the OK button, I was informed that 51 updates succeeded and 75 failed. Codes 800706BE 800706BA were mentioned.Upon reboot, another batch of updates (75?) installed; then the PC rebooted twice.At this point, Windows 7 appears to be completely installed and up to date. There are no new items in Windows Updates. However, the Microsoft Mouse and Keyboard Center is nowhere to be found; I was able to download the installer and successfully install the product.
Windows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question
Windows tells me not to unplug or power off machine. But I think I have no internet connection, so how can Windows install 9 updates?
In "Wireless Network Connection Status" I saw:
IPV4 Connectivity No Network Access IPV6 Connectivity No Network Access Media (something) Disabled
I cannot connect to my wireless network. Other computers on the home wireless network work fine. This makes me suspect a failed wireless adapter card in my PC. I did not check Device Manager for a bad adapter before I ordered "Shutdown".
Can I power off the PC anyway? Will something bad happen if I do? If I shutdown and power back up, what can I do to fix the "No Network Access" problems and go on line? Troubleshoot adapter through Device Manager? Any other ideas or precautions?
Last night I received a message that Windows needed to download updates. There were seven of them, so I clicked on install. After downloading it said it had to restart to complete the installation. I then got the screen saying "Configuring Windows. Do Not Turn Off Your Computer." The little circle kept spinning for about a half hour. I saw that the HD light didn't come on at all, so I assumed it had locked up. I had to press and hold the power button to get it to reboot, and after telling me Windows did not shut down normally, it started up and appeared to complete the update installation.I checked the Update History and most of the updates said "Successful" but a few said "Pending". I have had this lockup happen before, but usually it installs with no problem. What can I do? What does Pending mean? I have Win 7 - 64 bt - Service Pack 1.
my brand new Asus ultrabook was installing updates, got to 30-40% and the screen turned off. I waited for about 30-40 mins but nothing changed so i turned it off from the button. Tried holding it down several times, and turning it back on and off but nothing changed. I can hear it loads windows and i have blindly managed to type my password and i've even heard skype load so it must be working properlu besides the dark monitor.
