Computer Shut Down While Installing Updates?

Jan 21, 2013

my brand new Asus ultrabook was installing updates, got to 30-40% and the screen turned off. I waited for about 30-40 mins but nothing changed so i turned it off from the button. Tried holding it down several times, and turning it back on and off but nothing changed. I can hear it loads windows and i have blindly managed to type my password and i've even heard skype load so it must be working properlu besides the dark monitor.

View 6 Replies


ADVERTISEMENT

Laptop Won't Shut Off - It's Been Installing Updates For 14 Hours

Nov 22, 2012

My HP laptop has been in shutdown mode all day. This morning I downloaded updates for my HP laptop, and I assume that while I was downloading HP updates, it also downloaded Windows 7 updates. After MY downloads finished I initiated shut down, but it had 18 updates to install. It has been stuck on update # 7 since 10 AM this morning.

I just bought this laptop this fall. I hadn't used it for almost a month, and meant to take it with me to school today, but I had to leave it at home while it shut down. Now I'm wondering if I should interrupt the process since it's been 14 hours since it started this and it still says installing update 7.

I'm worried that if I shut it off manually it will corrupt the bios

View 4 Replies View Related

Constant (Do Not Switch Off / Installing Updates) Message On Every Shut Down

May 12, 2011

I am using Windows 7 32 bit. I have now got a problem after automatic updates from MS. This occurs now on every shut down and power up. The message, Please do not switch off, installing updates etc. Then on power up, Installing updates etc it freezes for ages then fails and reboots.

View 3 Replies View Related

Do Not Turn Of Computer Windows Installing Updates

May 12, 2011

Every time I turn on my pc I do have a message Do not turn of your computer Windows installing updates after a while I do have second message 0% Update completed after a while the third message appear Windows Update Failed, Reverting Files, do not turn off your computer after that I see the Welcome message then Windows starts normally. I do have Windows 7 Pro 64 bit, that happens every time I switch on my pc, my updates are:Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175) [code]

View 2 Replies View Related

Computer Crashes After Installing Drivers Or Updates?

May 10, 2012

I have windows 7 installed on a PC I built a little over a year ago. I recently upgraded to the windows 8 consumer preview, but I didn't like it so I'm trying to switch back. When I install windows it works fine, I can turn my computer off and on as many times as I want and it will be fine, but if I install any video card drivers or any of the updates that windows tells me to install, the next time it boots up I either get the windows splash screen or a black screen right after it says, "starting windows", and shows the 4 orb things that spin around and turn into the windows logo. It stays on this screen for 5-10 seconds and then continues to black or the splash screen. I have tried installing only my video card driver, I have tried installing only one of the recommended updates, but no matter what I install it doesn't work the next time it boots, so I don't think it's a problem with one specific driver. However I have selected only the ones that started with: important windows update, or something like that, none of the security updates or anything and those installed successfully. I have reset my bios and changed every setting I can think of, but nothing works. I have also completely formatted and re-patitioned my hard drive. I have basically reset my computer as much as possible without building a new one. What else can I do? I need to install my video card driver at the very least or I can't play games, which is the whole reason I built a PC

View 9 Replies View Related

Computer Freezing / Not Responding In Windows 7 After Installing Updates

Apr 27, 2012

My computer was working fine until I downloaded the windows service pack 1. First it was every now & then but soon my computer was freezing up ( not responding ) and it was impossible to even complete a document. This happens in all applications. I noticed with each new window update the worse my computer got. Still under warranty I spent hours on the phone with DELL twice, finally I did a fresh re-install of windows 7 professional. After the fresh install everything was fine. UNTIL I downloaded the windows updates, it started to 'not respond' again. I uninstalled the updates. The not responding issue is gone but I am concerned about windows security updates. Do I need them? I have contacted windows about this issue many times over the past several months with no response.

View 3 Replies View Related

Updates At Shut Down?

Feb 25, 2011

I just recently installed windows 7 ultimate..and everytime I shutdown the computer it automatically installs updates and I do not want that at all.ure..I dont want any updates installed at all without my consent..nor do I want the pc to do any updating before shutting down

View 8 Replies View Related

Windows 7 Ultimate SP1 X64 Shut Down Not Turn Off After Updates

May 20, 2012

I recently installed GTX670 SLI in my machine and run some benchmarks to test it is all working.

Afterwards, I did a clean format complete re-install with Windows 7 Ultimate x64 SP1 with updates. It appears now when I shut down my machine, windows turns off the display and seems to shut down but does NOT turn off the fans/LEDs on my computer.

I then re-installed a clean windows 7, installed my drivers ONLY (no windows updates) and it shuts down/turns the computer off fine.

View 2 Replies View Related

Windows 7 - Same 5 Updates Repeating Download On Every Shut Down

Jan 21, 2013

They are all microsoft .net updates. I have tried the microsoftfixit tool and also tried repairing the .net file and then re downloading the updates after. But annoyingly they pop back up every time.

View 5 Replies View Related

Windows Update - Installs Same Updates On Shut Down - 0% Stuck

Sep 6, 2012

Ok over the past week or so windows has been installing the same 3 updates every night! Windows 7 Home Premium 64Bit

So I checked to see if they failed and they were installed successfully!

I have ran 3 different MS Fixit things to no avail. I have tried to update the PC manually however it does not go past 0% on installing the updates it just says preparing updates.

I tried adding 2 optional updates to make it 5 and manually clicking update however it sticks on 0% downloading updates.

I am usually pretty good at troubleshooting and fixing PC problems however this one I am defeated! I do not want to restore if possible, will this take away ANY of my files e.g work I have done I have never had to do it before!

View 9 Replies View Related

Installing Updates And Installing Features Part Of Windows Setup Menu?

Sep 3, 2010

How do I installing something during the Windows Setup Menu's Installing features and Installing updates?

View 3 Replies View Related

Windows 7 Home: Stop Automatic Installation Of Updates On Shut Down?

May 22, 2012

Windows XP used to give you the option to shut down your PC without installing Windows updates or to choose to shut it down and install updates,but this feature seems to be missing in Windows 7.One of my PC's runs Windows 7 Professional and it also comes with the Group policy Editor (gpdeit.msc) that can be used to tweak the registry so that you get the option to shut down with/without installing updates. It is fairly straightforward to do.However another of my PC's runs Windows 7 Home and it does not come with gpedit.msc.I downloaded the Group Policy Settings References for Windows 7 and Windows Server Excel file (Download: Group Policy Settings Reference for Windows and Windows Server - Microsoft Download Center - Download Details), and scrolled down to the Windows Updates lines at the end of the Administrative Templates tab; but I was unable to find the registry references in my registry. Specifically in order to enable "Do Not Adjust Default Option to Install Updates and Shut Down", I could not find the registry entries listed in the spreadsheet under either the HKCU or HKLM portions of my registry.

View 4 Replies View Related

Windows 7 Updates Keeps Installing Same 8 Updates Over And Over

Aug 24, 2012

I did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.

View 9 Replies View Related

When Installing Windows 7 On New SSD It Always Stops At Installing Updates?

Oct 28, 2011

I have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.

View 4 Replies View Related

Windows 7 Won't Shut Down After Installing Programs?

Sep 11, 2012

I bought a new asus laptop with windows 7 and when i load any program on it! it will not shut down through start menu i have tried to install in different order no

View 13 Replies View Related

Windows 7 Updates Not Installing?

Feb 13, 2012

Windows notifies me that there are updates available. When I select to install the updates it takes a long time and I get a message stating that windows has detected that my computer is running on battery power and to plug my computer into an outlet.I get this message even when my computer is plugged into an AC outlet at the beginnig of the update dowload attept.What could be the problem? I had to have Windows 7 reinstalled on my computer by someone at a local charitable company but I've noticed little weird things that didn't happen when I had my original version.Internet sessions closing suddenly and cursor skipping around the page eventhough I updated my touchpad drivers.

View 1 Replies View Related

Can't Do Upgrade To Fix Updates Not Installing?

Apr 17, 2012

I've a customer who simply cannot install all updates. In in the end, he decided to try the upgrade route in an attempt to fix the updates not installing. He got hold of an ISO (without SP1) and started the process. At about 70% completion (I believe the OS components have successfully been installed) it stops. The error message states something about lack of disk space to install the applications (????).There's plenty of disk space of coursePrevious to the upgrade try, we've run various MS FixIt tools, SFC, disk check, disabling A/V, checking for malware, etc. Commonly, upon unsuccessful updates, the error codes are either 8007371b or 80073712.

View 9 Replies View Related

Downloading And Installing All Updates At Once

Oct 12, 2012

I have now taken over the formatting of laptops at my work place. We buy and sell second hand laptops, so want to erase all data before we sell them. Everything is fine, but the updates take forever, and need you to be around to continually restart the computer numerous times. I downloaded WUD and downloaded every update at once, but still found that they could not all be installed at once (Unless I did something wrong), So I was wondering if there is some way you can install all the windows updates at once, as that would save me so much time, as some of the updates take forever to install, making the whole process a good 4-6 hour job sometimes.

View 9 Replies View Related

KB2724197 Keeps Installing, No New Updates Since

Jan 12, 2013

KB2724197 - a 15KB update - constantly pops up as a new update on my Windows Update, despite having been installed several times. I have had no new updates now for some weeks, only this 15kb one shows up. I have downloaded the standalone version and used that, and tried to install it without my AV software running, but it still persists. It does not show up in the list of installed updates in Programs & Features.

View 4 Replies View Related

Windows 7/64 Always Installing Updates

Dec 9, 2012

I keep setting Windows to 'Check for updates but let me choose ...' but it keeps changing back to 'Install updates automatically'. Usually I notice this as the updates install or I see the messages that the updates were installed.

View 2 Replies View Related

Installing All Windows Updates At The Same Time On A New PC?

Sep 14, 2012

I'm rebuilding my desktop PC with a fresh installation of Windows 7 x64.Upon first boot after installation, 3 updates automatically installed. After a reboot, I was informed that over 100 additional recommended updates (and quite a few optional updates) were ready to be installed.I chose to install all of the recommended and optional updates (except for the 39 international updates).During the Windows Update installation process, a Microsoft Mouse and Keyboard Center installation window appeared. When the progress bar got to about 75%, however, the following error dialog appeared underneath: Microsoft Visual C++ Runtime LibraryThis application has requested the Runtime to terminate in an unusual way Presumably, the installation of the Microsoft Mouse and Keyboard Center (and perhaps other items) failed to install; upon pressing the OK button, I was informed that 51 updates succeeded and 75 failed. Codes 800706BE 800706BA were mentioned.Upon reboot, another batch of updates (75?) installed; then the PC rebooted twice.At this point, Windows 7 appears to be completely installed and up to date. There are no new items in Windows Updates. However, the Microsoft Mouse and Keyboard Center is nowhere to be found; I was able to download the installer and successfully install the product.

View 5 Replies View Related

Windows 7 Update Keeps Installing The Same Updates Over And Over?

May 27, 2012

Windows Update seems to be stuck in and endless cycle of applying the same 5 important updates over and over again. Probably been happening for about 3 months now, and despite going through the install process and following all the instructions to the letter, every time I start up, the same updates are available for download again. Here is a screenshot of Windows Update showing the updates in question

View 4 Replies View Related

BSOD After Installing Latest Updates

Jun 8, 2009

I was running both x64 & x86 version of Windows 7 RC1 build 7100 quite well till now.

I downloaded the images from MS.

Today suddenly my x64 gave the BSOD..

At the end of BSOD some ACPI error is mentioned

I downloaded the new updates & system was installing them when BSOD occured...

The strange thing is that I tried to repair thru every possible means from safe mode to EMS & by starting from the DVD but it failed.(Every try ends at BSOD)

Now the problem is When I try to boot from the x64 DVD(from which I installed) after "Loading files" the BSOD comes when screen says Windows Starting. Even before the glowing animation!

I disconnected my all HDD drives but still no success.

View 4 Replies View Related

BSOD After Installing All Windows Updates

Jul 30, 2009

I have managed to achieve the BSOD quite a lot, and have tried re-installing Windows 7 x64 on my computer three times today.

I have received the BSOD:

after trying to reformat my F: drive.

Uninstalling my Nividia drivers for a new one

After using Firefox for a while it just won't open and BSOD follows shortly after

I believe after installing Windows Live applications it startes to give me BSOD

After the first BSOD I start to get the error message:

Check filesums or somehting about the computed sums is not correct.

View 2 Replies View Related

Installing Updates (1 Of 9) But No Internet Connection

Jan 15, 2013

Windows tells me not to unplug or power off machine. But I think I have no internet connection, so how can Windows install 9 updates?

In "Wireless Network Connection Status" I saw:

IPV4 Connectivity No Network Access
IPV6 Connectivity No Network Access
Media (something) Disabled

I cannot connect to my wireless network. Other computers on the home wireless network work fine. This makes me suspect a failed wireless adapter card in my PC. I did not check Device Manager for a bad adapter before I ordered "Shutdown".

Can I power off the PC anyway? Will something bad happen if I do? If I shutdown and power back up, what can I do to fix the "No Network Access" problems and go on line? Troubleshoot adapter through Device Manager? Any other ideas or precautions?

View 4 Replies View Related

Windows 7 Hangs While Installing Updates?

Dec 15, 2011

Last night I received a message that Windows needed to download updates. There were seven of them, so I clicked on install. After downloading it said it had to restart to complete the installation. I then got the screen saying "Configuring Windows. Do Not Turn Off Your Computer." The little circle kept spinning for about a half hour. I saw that the HD light didn't come on at all, so I assumed it had locked up. I had to press and hold the power button to get it to reboot, and after telling me Windows did not shut down normally, it started up and appeared to complete the update installation.I checked the Update History and most of the updates said "Successful" but a few said "Pending". I have had this lockup happen before, but usually it installs with no problem. What can I do? What does Pending mean? I have Win 7 - 64 bt - Service Pack 1.

View 5 Replies View Related

Updates Not Installing Due To Which Live Is Not Working

Dec 30, 2011

I deleted my public folders a few days ago and now I can't do any updates!Windows Live stopped working as did Evernote.I don't want the Public folders and was hoping there is a way to solve this.

View 17 Replies View Related

Windows 7 Gets Corrupted After Installing Updates?

Jul 1, 2012

I have a dual hard drive system. When I attempt install windows 7 from the disk, I can do it and then install some programs, but windows ask to install important updates. Once it does this it always crashes and I can't boot into windows anymore. The repair windows 7 install does NOT work. Neither does the restore to a previous time work. Does this indicate that the hard disk is defective? I have used the western digital tool and it tested fine.

View 5 Replies View Related

Start Up Keeps Failing After Installing Windows Updates?

Jun 19, 2011

I'm running Windows XP 7 on a HP EliteBook 8440p laptopI installed three updates, including the latest Windows 7 Service Pack and now my computer will not start up again. The Startup Repair tool is detecting no errors. The system restore tool warns me that my diagnostic power is low and a restore can not be reversed. I ran a chk dsk and no errors were found and fixed there either.

View 8 Replies View Related

Sound Not Working After Installing Windows Updates?

Jan 26, 2012

So first I get this message when I mouse over the speaker icon(notice the red "x" on the icon).When I click the icon, Windows does a diagnostic and then this shows up.This is whats listed in my playback devices and this is with "Show disabled devices" enabled. Everything is enabled,Here is a picture of what my device manager looks like.

I've tried installing drivers for my sound card and my chipset, I tried restarting my computer, updated from my device manager, uninstalled drivers, reinstalled, etc. I've been searching online for a bit and nothing I found worked so I figured I'd give this a shot. I tried uninstalling the service pack update but that didn't work.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, x64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 3198 Mb
Graphics Card: NVIDIA GeForce GTX 460, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 300816 MB;
Motherboard: Gateway, G33M05G1

View 6 Replies View Related

Download Vista Updates Before Installing Windows 7?

Oct 15, 2011

I have Windows Vista Home Premium 64-bit OEM (with free Windows 7 upgrade). I want to reformat the computer. After installing Vista, do I need to download Vista updates, before installing Windows 7? Or just immediately install Windows 7 after Vista? Also, how often do you do a fresh install (reformat)?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved