Error Applying Update Operation After Installing Windows 7 Service Pack 1
Feb 23, 2011
I installed Service Pack 1 for Windows 7. After it rebooted, on the Windows 7 loading screen it shows "Applying update operation XXXX of XXXX". After a certain number it says "Error applying operation XXXX of XXXX", and then the system proceeds to hang on that screen, meaning that I am unable to access Windows. I try mashing F8 for my life when resetting the computer, but I never get a list of boot options, so I cannot get into Safe Mode or even try the computer's Last Known Good Configuration. The edition of this version of Windows 7 is 64 bit Ultimate. The laptop I am using is also 64 bit Ultimate.
Another thing I want to point out is that both of these computers have been taking an incredibly long time (near 12 hours at this point) trying to download and install Service Pack 1. There is no spyware or anything running in the background. I am fearing that I might get the same error on this machine but I have taken the liberty of creating a System Restore point in the event it happens. I have two other Windows 7 machines in the house (32 bit Professional and 64 bit Home Premium), and both of them installed Service Pack 1 without any kind of problem, and both of those computers installed them rather quickly.
View 7 Replies
ADVERTISEMENT
May 26, 2011
Yesterday I clicked yes to update the windows software for my other laptop. Then after it was done it asked for a restart. I did a normal shut down yesterday and went to start it this afternoon and this Fatal Error appeared " Fatal error c0000034 applying update operation 197 of 97690 (_00000...)
View 1 Replies
View Related
Jun 12, 2011
I was doing some Windows Updates and then my computer froze. So I was forced to hold the power button, when I tried turning it back on and windows won't load. I get the error: "Fatal error c0190003 applying update operation 2806 of 118356 (recover...)". I can't do a system restore. It doesn't do anything, I have to do 'Start Windows Normally'.. and Windows just won't load in my laptop. It is a Dell Inspiron with windows Windows 7.
View 14 Replies
View Related
Mar 28, 2011
Is there any way I can check what is see what is preventing Service Pack 1 KB 976932 from installing on my laptop? My laptop is running fine, all other updates installed normally. Don't know whether its a related issue or not but when I connect my Samsung Galaxy S to my laptop via USB, I get MTP driver install failure.
View 9 Replies
View Related
May 4, 2011
I recently updated my Windows 7 Ultimate with Service Pack 1 through Windows Update and after the reboot my Bluetooth devices don�t work. I have two Dell mice and a Dell keyboard and they no longer function.I deleted the devices and added them back and while they were discovered and did attach they don�t function. Additionally, detailed information on the devices is no longer present.One of my mice was a Dell Travel Mouse and before it showed up as an icon that looked just like my mouse not it shows up as a generic mouse.
In trying to troubleshoot this i disabled the internal Bluetooth and plugged in a Belkin Bluetooth Dongle and it behaves the same way. However as this was an external device it has a flashing light showing when it is receiving a transmission and when I moved the mouse the light would flash so the signal is getting to the computer however nothing is happening on screen. This dongle works perfect on my other Dell D620 Laptop with Windows 7 and no service pack.
Dell D830
Internal Dell 360 Bluetooth
Windows 7 Ultimate
Service Pack 1
4 GB RAM
All Windows Updates applied
View 2 Replies
View Related
Sep 7, 2012
I am installing SP1 for windows 7, I get the error 800B0100, I have already tried the system readiness tool 2 times and all it does is install a hotfix.
View 5 Replies
View Related
Oct 14, 2009
Issues with installation of a recently released update from Microsoft
Security Update for SQL Server 2005 Service Pack 3 (KB970892) error code 6D9E fails to finish and install.... have went to microsoft and attempted to download the files, however installation fails during this process as well.... any suggestions?
Current OS Windows 7 Ultimate Build 7600
View 3 Replies
View Related
Sep 18, 2012
i get the same error message over and over again when i try to install service pack 1 on my windows 7 ultimate 64-bit, and if you leave it running it will bsod as soon as windows starts, i'm not sure what information to put on here, but i've tried nearly everything that there is to try, but nothing will fix.
View 1 Replies
View Related
Jul 28, 2012
I reinstalled Windows recently, but it used the same boot partition from my old installation. I got rid of the old partition (it was on the wrong hard drive) and created a new one with the repair disc. Windows boots, but won't install updates. Bcdedit outputs The boot configuration data store could not be opened. The system cannot find the file specified.
View 6 Replies
View Related
Apr 9, 2012
I recently purchased a 128gb Crucial M4 SSD. The other day my father and I sat down together to work on setting up the SSD as my OS drive. We installed Windows 7 64bit Home Premium successfully on the drive. There were no issues until I started to install drivers liberally rather then conservatively.While installing ~101 Window's Updates, I impatiently started installing my XFX Radeon 6870 drivers. This caused a crash and a blue screen to appear. After rebooting the system in Safe Mode, everything appeared fine. However, my video card drivers were in a weird funk. After some research, I resolved the issue and my video card drivers were all working and installed successfully.The big problem now is that when trying to Install Service Pack 1, I get an error code upon reboot that says "D_S_S_SUCCESS(0x0)". During the installation of Service Pack 1, the install stops about half-way and wants me to reboot the system, so I do. Rebooting the system is when I get the error code. The screen that pops up says that the install was unsuccessful. I've looked around on Microsoft's website to find some help. So far I've performed the following tasks:
Downloaded a tool by Microsoft called Mrfixit. I've ran troubleshooting that attempts to fix windows update. I've ran disk cleanup to delete temporary files, which won't even delete everything... I've uninstalled any virus software System Update Readiness Tool I've tried renaming the systems distribution folder..(Was this bad?) When I renamed my systems distribution folder to SDold... it created another one... Should I delete my systems distribution folder? Is there anyway to revert this? I hope I didn't ruin anything by doing this. I have no clue what to do next to fix this issue. I'm really concerned I'm damaging my Solid State Drive by all this constant rebooting and installing/uninstalling.
View 1 Replies
View Related
Sep 12, 2011
I just got Windows 7 Enterprise N about a week ago. It is for my computer networking class, our teacher also gave us a bit more other software and I am trying to find out what I am doing wrong. I have installed and ran the precursor software from microsoft.com to make sure that my computer is able to use SP1 and I don't have any problems in my registry. It is an official, licensed version and registered, and all the other updates work. I have manually downloaded and tried to install it and still nothing. Where do I start on troubleshooting this?
View 8 Replies
View Related
Apr 24, 2011
After I reinstalled it, and went on to update the W7 SP1 a strange noise came out of my machine just as it began installing it, and then it seemed like my hard drive crashed, so the PC became unresponsive and I had to shut it down by holding in the button (it tried to recover files when I started it up again, hence my hard drive problem theory).I've since reformatted my machine five times and the exact same thing happens, everything, including hard drive works perfectly until I get to installing Service Pack 1.
View 8 Replies
View Related
Aug 4, 2011
Ok, so i have just built my pc and have been finding it impossible to update to service pack 1. The reason given is: Code 80070057 Windows Update encountered an unknown error. I have researched this type of topic for about 2 days now and haven't found any good solution so i'm trying to post myself now. I have run an sfc scan and this is my test results:Here is some more info about my PC.
View 7 Replies
View Related
Nov 19, 2011
I'm having trouble updating to service pack 1 in Win 7 x64 Home Pre by Dell OEM.
There is another post that the problem can be solved using the log file so I have tried using the Readiness Tool and the log is as followed:
[Code]...
View 9 Replies
View Related
Nov 20, 2011
Tried to install Service Pack 1 on my machine today and I find it gets stuck as it installs once I've shut it down. I did have to hide one of the updates about a month ago which did the same thing, so I'm assuming it's been put in SP1 and is what's causing it to get stuck. Just tried to view the hidden updates to tell you which one it was, and to ask how to stop it from installing in SP1, but it seems to have disappeared from there, which might be because of SP.Can I find this missing hidden update? Is there a way that I can remove this one update from SP1?
View 2 Replies
View Related
Apr 16, 2011
I can't install Huawei E173 under Windows 7 Ultimate 64-bit Service Pack 1. I get the following message:"Upravljački program nije pronađen" in the screenshot means "Driver not found".I have also tried connecting the modem while connected to the Internet, to no avail.I had previously installed and used 3 other USB mobile broadband modems on the same system, 2 of which were Huawei. All software for these modems is supposed to be uninstalled.However, when I install it under a VMware virtual machine with a fresh install of the same operating system, everything works fine.I have also tried copying all relevant drivers successfully installed under the virtual machine to the physical machine, but that doesn't completely work, either.
View 4 Replies
View Related
Oct 1, 2011
Service pack one refuses to install. My computers specifications are available in my profile. I had service pack one installed fine before but I was forced to do a clean install and now it won't install, I've also tried the standalone installer for the service pack. Auto update just doesn't download and standalone installer stops about halfway, around the area where it should ask to restart. Internet explorer 9 won't install either plus any other update from windows update.I'm using Comodo internet security but before I was using MSE and the problem still occurred then.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU E6700 @ 3.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4094 Mb
Graphics Card: ATI Radeon HD 5570, 1024 Mb
Hard Drives: C: Total - 453862 MB, Free - 243497 MB; D: Total - 99 MB, Free - 61 MB; F: Total - 499898 MB, Free - 469472 MB;
Motherboard: Gigabyte Technology Co., Ltd., G41MT-D3, ,
Antivirus: COMODO Antivirus, Updated and Enabled
View 12 Replies
View Related
Mar 13, 2012
I have been receiving and installing updates to my Windows 7 computer for about a year now. So far there have been no problems. About mid year of 2011 I installed SQL Server 2005 Express. Not certain the problem I am having began then or later, like about November 2011.The problem is that Visual Studio 2005 Service Pack 1 update will not install (file size 431.7MB), any ideas why? Does not appear to effect anything else as my computer appears to be running fine.
View 1 Replies
View Related
Nov 30, 2012
Today windows downloaded and installed SP1 automatically. After that, the power went off, when it came back and I booted the PC it started updating as it would usually do, it finished updating then rebooted and started updating again, this happened around three times (no failure, just installs over and over again). I became tired so I shut it down and it displayed "Failure configuring Service pack. Reverting changes", after that it rebooted again but began installing the SP once more, I rebooted again in safe mode and it began reverting changes once more only to reboot again and attempt to update once more.Right now it's reverting changes once more and I'm just sitting here waiting and I don't know what to do (also, it's been reverting for quite a long time, around 30 minutes)
View 5 Replies
View Related
Mar 28, 2011
This happened to me on my last build and last night I reinstalled my computer and the issue stopped. Now, after installing Service Pack 1 (it seems), it continues to stop at the welcome screen and forces me to click my user to continue logging in (No Password). Is this handled by a setting or is it an actual issue? I'm running Windows 7 Ultimate 64 Bit.
View 2 Replies
View Related
Oct 23, 2009
My computer went through some problems and I will be getting a new hard drive. Once I get the new HDD I will have to reinstall Vista, which will only have up to service pack 1 included. Do I need to then upgrade to Vista Service Pack 2 before installing my Windows 7 Professional Upgrade, or will it still work on top of service pack 1?
View 1 Replies
View Related
Mar 15, 2012
I have a Sony Vaio laptop, maybe 2-2.5 years old. I let it install the updates earlier this afternoon and it needed to restart to finalize everything. I did not have it plugged up but thought there was plenty of battery life so I let it restart and went to do a couple things around the house. I was only gone 10-15 minutes but when I got back it was dead.
So I plugged it up and tried to power it back up. The VAIO screen comes up and then it goes straight to a black screen with a little blinking dash mark in the top left corner. The dash moves down 2 or 3 lines and then just sits there and blinks. I cannot get the computer to do anything else.
View 1 Replies
View Related
Dec 12, 2009
Update for Microsoft XML Core Services 4.0 Service Pack 2 for x64-based Systems (KB973688). I've continuously receive an error stating this update failed. I've been trying to figure what could be the cause. I just purchased a new laptop (Acer - Aspire) that was preloaded with Windows 7. All other updates have been successful. Any advice would be greatly appreciated. Also, has anyone had any trouble with installing MS 2007 software on Windows 7; do you forsee my current issue hindering future MS 2007 install? I'm currently using MS 2003.
View 3 Replies
View Related
May 29, 2011
I have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently used system restore to roll back a few days and now when I try to install have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently rolled back my PC a few day with system restore, then updated Windows to the newest updates. I downloaded SP1 32-bit and when I try to install it, it installs right to almost the end and gives me: Error 0x80070002.
View 1 Replies
View Related
May 17, 2011
When I try to install W7SP1, I get an error message after it tries to install after restarting after having downloaded it in Windows Update. It's error code 0x800f0826. IT used to be 0x80071a9, but I fixed that I think.
Note: My laptop does not have a built in disc reader, because of its design, nor did it come with any W7 CD's.
View 5 Replies
View Related
Nov 16, 2011
WindowsUpdate_8024200D" "WindowsUpdate_dt000" everytime i try to download SP1 it gets to 100% starts to install and i get this error, ><
View 3 Replies
View Related
May 7, 2012
I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and i have not noticed it until now. Of the seven attempts I had the following error codes from earliest to latest : 800B0100, 80246007, 80010108, 8024200D, 8024200D, 8024200D, 8024200D. I have followed advice from MS running KB947821 and FIX IT also disabled my Norton 360 firewalls and auto protect but to no avail. Also I do not have a DVD with Windows 7 as it was not supplied with my PC and I don't want to restore my computer and lose all my installed software.
View 3 Replies
View Related
Jul 20, 2012
I get the attached error when I try to install Windows 7 Service Pack 1 for x64 based Systems(KB976932).
View 4 Replies
View Related
Nov 17, 2012
I get error code 8007002 when I install language packs(English). I'm sure installed the English language pack on my computer and switch to English. After reboot my computer it show up original(Chinese language).Than I check my computer is show currently Display:English I try to switch to english again but can't find English language pack in my computer.Than I download it again and reinstall again.during install get a error code
8007002.I have tried the Microsoft suggested solution. (deleting Software Distribution, somthing like that)but still not work.
View 1 Replies
View Related
Jun 9, 2011
I am having trouble installing sp1 despite other windows updates having been flawless so far. I tried following instructions found at the Windows site but the System Update Readiness Tool didn't find any errors and repair installation aborts. Sorry to bother you with another "sp1 fail" thread but I have exhausted my search options for solution here and in other sites, which makes this request for help my last resort.
View 5 Replies
View Related
Jan 4, 2013
I'm havin' a bit of trouble installing Service Pack 1. Either that or Windows Update wants to make an excuse and stop the installation halfway and then spit out a random error code. Failed - Error Code 8024200DWould downloading the MSU file help resolve what's halting the update process?
View 2 Replies
View Related