Error While Service Pack Installation
Jul 20, 2012I get the attached error when I try to install Windows 7 Service Pack 1 for x64 based Systems(KB976932).
View 4 Replies
ADVERTISEMENT
Correct Service Pack 1 Installation File For Windows 7 Professional 64-bit?
Mar 2, 2011I would like to download the 64-bit version of Windows 7 Service Pack 1 to patch my system.
1) Is this the correct Service Pack 1 installation file for Windows 7 Professional 64-bit?
Windows6.1-KB976932-X64.exe
2) Do I need to download and install any of the other .Symbols files from the website?
3) I am installing a new PC with Windows 7 Professional RTM from the DVD. Can I install SP1 immediately after installing Windows 7, or do I need to do a Windows Update first?
Error With Service Pack 1
Nov 16, 2011WindowsUpdate_8024200D" "WindowsUpdate_dt000" everytime i try to download SP1 it gets to 100% starts to install and i get this error, ><
View 3 Replies View RelatedService Pack 1 Fails - Error 80073712
Jun 9, 2011I am having trouble installing sp1 despite other windows updates having been flawless so far. I tried following instructions found at the Windows site but the System Update Readiness Tool didn't find any errors and repair installation aborts. Sorry to bother you with another "sp1 fail" thread but I have exhausted my search options for solution here and in other sites, which makes this request for help my last resort.
View 5 Replies View RelatedClfs.sys Error When Installing (configuring) Service Pack 1
Sep 18, 2012i get the same error message over and over again when i try to install service pack 1 on my windows 7 ultimate 64-bit, and if you leave it running it will bsod as soon as windows starts, i'm not sure what information to put on here, but i've tried nearly everything that there is to try, but nothing will fix.
View 1 Replies View RelatedCan't Install Windows 7 Service Pack 1 - Error 0x80070002
May 29, 2011I have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently used system restore to roll back a few days and now when I try to install have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently rolled back my PC a few day with system restore, then updated Windows to the newest updates. I downloaded SP1 32-bit and when I try to install it, it installs right to almost the end and gives me: Error 0x80070002.
View 1 Replies View RelatedInstalling Windows 7 Service Pack 1 - Error 800B0100
Sep 7, 2012I am installing SP1 for windows 7, I get the error 800B0100, I have already tried the system readiness tool 2 times and all it does is install a hotfix.
View 5 Replies View RelatedCan't (re)install Service Pack 1 / Error Code 8024200DWould
Jan 4, 2013I'm havin' a bit of trouble installing Service Pack 1. Either that or Windows Update wants to make an excuse and stop the installation halfway and then spit out a random error code. Failed - Error Code 8024200DWould downloading the MSU file help resolve what's halting the update process?
View 2 Replies View Related[SP1] Cannot Install Windows Service Pack 1 - Error Code: 0x800f0826
May 17, 2011When I try to install W7SP1, I get an error message after it tries to install after restarting after having downloaded it in Windows Update. It's error code 0x800f0826. IT used to be 0x80071a9, but I fixed that I think.
Note: My laptop does not have a built in disc reader, because of its design, nor did it come with any W7 CD's.
Error Update SQL Server 2005 Service Pack 3 (KB970892)
Oct 14, 2009Issues with installation of a recently released update from Microsoft
Security Update for SQL Server 2005 Service Pack 3 (KB970892) error code 6D9E fails to finish and install.... have went to microsoft and attempted to download the files, however installation fails during this process as well.... any suggestions?
Current OS Windows 7 Ultimate Build 7600
Error Applying Update Operation After Installing Windows 7 Service Pack 1
Feb 23, 2011I installed Service Pack 1 for Windows 7. After it rebooted, on the Windows 7 loading screen it shows "Applying update operation XXXX of XXXX". After a certain number it says "Error applying operation XXXX of XXXX", and then the system proceeds to hang on that screen, meaning that I am unable to access Windows. I try mashing F8 for my life when resetting the computer, but I never get a list of boot options, so I cannot get into Safe Mode or even try the computer's Last Known Good Configuration. The edition of this version of Windows 7 is 64 bit Ultimate. The laptop I am using is also 64 bit Ultimate.
Another thing I want to point out is that both of these computers have been taking an incredibly long time (near 12 hours at this point) trying to download and install Service Pack 1. There is no spyware or anything running in the background. I am fearing that I might get the same error on this machine but I have taken the liberty of creating a System Restore point in the event it happens. I have two other Windows 7 machines in the house (32 bit Professional and 64 bit Home Premium), and both of them installed Service Pack 1 without any kind of problem, and both of those computers installed them rather quickly.
Windows 7 Service Pack 1 Fails To Install Error Code 8024200D
May 7, 2012I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and i have not noticed it until now. Of the seven attempts I had the following error codes from earliest to latest : 800B0100, 80246007, 80010108, 8024200D, 8024200D, 8024200D, 8024200D. I have followed advice from MS running KB947821 and FIX IT also disabled my Norton 360 firewalls and auto protect but to no avail. Also I do not have a DVD with Windows 7 as it was not supplied with my PC and I don't want to restore my computer and lose all my installed software.
View 3 Replies View RelatedWindows 7 Service Pack 1 Language Packs (Kb2483139) Error Code (8007002)
Nov 17, 2012I get error code 8007002 when I install language packs(English). I'm sure installed the English language pack on my computer and switch to English. After reboot my computer it show up original(Chinese language).Than I check my computer is show currently Display:English I try to switch to english again but can't find English language pack in my computer.Than I download it again and reinstall again.during install get a error code
8007002.I have tried the Microsoft suggested solution. (deleting Software Distribution, somthing like that)but still not work.
Created Boot Partition Manually / Service Pack Update Error 0x800F0A12
Jul 28, 2012I reinstalled Windows recently, but it used the same boot partition from my old installation. I got rid of the old partition (it was on the wrong hard drive) and created a new one with the repair disc. Windows boots, but won't install updates. Bcdedit outputs The boot configuration data store could not be opened. The system cannot find the file specified.
View 6 Replies View RelatedWindows 7 SP1 - English Language Pack Installation Error : 800736B3?
Nov 1, 2011i am having a problem with installing the english language pack on windows 7 ultimate sp1. it is now in polish since i am polish and the edition i have is called windows 7 ingresso which is basicaly a cut down version of windows 7 with some great programs preinstaled and is also really fast. the thing is i like doing Internet tutorials to some programs and things like that, but can't because windows is in polish...i tried installing the english language pack through windows updates but it gives me an error code 800736b3
View 2 Replies View RelatedInstalling Windows 7 64bit Service Pack 1, Error "D_S_S_SUCCESS(0x0)"
Apr 9, 2012I recently purchased a 128gb Crucial M4 SSD. The other day my father and I sat down together to work on setting up the SSD as my OS drive. We installed Windows 7 64bit Home Premium successfully on the drive. There were no issues until I started to install drivers liberally rather then conservatively.While installing ~101 Window's Updates, I impatiently started installing my XFX Radeon 6870 drivers. This caused a crash and a blue screen to appear. After rebooting the system in Safe Mode, everything appeared fine. However, my video card drivers were in a weird funk. After some research, I resolved the issue and my video card drivers were all working and installed successfully.The big problem now is that when trying to Install Service Pack 1, I get an error code upon reboot that says "D_S_S_SUCCESS(0x0)". During the installation of Service Pack 1, the install stops about half-way and wants me to reboot the system, so I do. Rebooting the system is when I get the error code. The screen that pops up says that the install was unsuccessful. I've looked around on Microsoft's website to find some help. So far I've performed the following tasks:
Downloaded a tool by Microsoft called Mrfixit. I've ran troubleshooting that attempts to fix windows update. I've ran disk cleanup to delete temporary files, which won't even delete everything... I've uninstalled any virus software System Update Readiness Tool I've tried renaming the systems distribution folder..(Was this bad?) When I renamed my systems distribution folder to SDold... it created another one... Should I delete my systems distribution folder? Is there anyway to revert this? I hope I didn't ruin anything by doing this. I have no clue what to do next to fix this issue. I'm really concerned I'm damaging my Solid State Drive by all this constant rebooting and installing/uninstalling.
Service Pack 1 For Windows 7 X64?
Feb 27, 2011I downloaded the service pack last night. It installed with no problem. Sort of embarrased to say this, but I have been unable to get into Farm Town on Face Book today. It's the first time I tried since installing the service pack. This has happened on both the desktop and laptop. Both are Windows 7 64 bit.
View 1 Replies View RelatedIncompatibilities With Service Pack 1?
Jun 26, 2011I run Windows 7 Ultimate 64-bit. Are there any incompatibilities that could cause problems if I install the service pack? I figured I'd wait until now to install it to ensure that most bugs would be fixed, but are there any major lingering ones?
View 4 Replies View RelatedService Pack 1 Not Installing?
Oct 1, 2011Service pack one refuses to install. My computers specifications are available in my profile. I had service pack one installed fine before but I was forced to do a clean install and now it won't install, I've also tried the standalone installer for the service pack. Auto update just doesn't download and standalone installer stops about halfway, around the area where it should ask to restart. Internet explorer 9 won't install either plus any other update from windows update.I'm using Comodo internet security but before I was using MSE and the problem still occurred then.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU E6700 @ 3.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4094 Mb
Graphics Card: ATI Radeon HD 5570, 1024 Mb
Hard Drives: C: Total - 453862 MB, Free - 243497 MB; D: Total - 99 MB, Free - 61 MB; F: Total - 499898 MB, Free - 469472 MB;
Motherboard: Gigabyte Technology Co., Ltd., G41MT-D3, ,
Antivirus: COMODO Antivirus, Updated and Enabled
Cant Install Service Pack 1
Oct 5, 2011I've been getting notifications for Service pack 1 for the last 2 months, so about 2 weeks ago I decided to install the update. The first time of trying it didn't install and after 3 other attempt it still hasn't worked. The update runs and downloads all the components then restarts. As soon as the Laptop goes to boot up it says configuring. It then goes to 10% and stops and aborts. The Laptop restarts again and configures back to default setting and starts normally again with a box saying Service pack installation was unsuccessfully. After a bit of research I found out that I may need to install System Update Readiness Tool. This programme will not install on my pc either for some reason?.
View 12 Replies View RelatedService Pack 1 Download?
Nov 13, 2012Even though 130 updates were done on my reformatted laptop, Windows Service Pack 1 was not one of them and it's still not showing up as an available update. When I go to Microsoft to download it, there are multiple (pretty large) files to download. The largest and first file is 1.9 GB, and I'm wondering if that contains all of the other single files? Can someone tell me if that is the one I need to download?
View 3 Replies View RelatedCan't Install Service Pack 1?
Aug 6, 2011Removed adobe virus through the virus forum. things operate now but can't install windows update. Other odd things happening; iTunes plays all my songs but when I go to the folder where they are stored, nothing shows up (same for pictures), get signs saying Dell support center has stopped working (same with ATI Graphics center) when I load up computer.
View 2 Replies View RelatedLooking For Net Framework V4 Service Pack 1
Oct 22, 2012Installing software at work and it says need NET Framework V4 sp1 before the install will work.I have found sp1 for previous versions of NET Framework, but not for v4.0 on the microsoft.com web site.I specifically seached there for 'NET Framework v4 sp1' and 'NET Framework v4 service pack 1.
View 7 Replies View RelatedWindows 7 Service Pack 1 Has Been Showing Up?
May 24, 2011in my list of updates since it was released. However I have put off installing it until the reviews were in.Last nite I decided to bite the bullet and do the install,and lo and behold SP1 is nowhere to be found in the list of available updates?Also checked update history to be sure it didn't get installed sneakily nowhere to be found?Spent sometime on the internet looking,but could find nothing addressing this.Where do I get SP1 now? Microsoft website?Why is it gone from the update list?
View 17 Replies View RelatedWindows 7 Service Pack 1 Not Downloading?
Jul 26, 2011Tried to download twice but it only goes half way.
View 4 Replies View RelatedUninstall Service Pack 1 Beta?
Nov 23, 2010I tried to install windows 7 service pack 1 release candidate. it says I have prelease version installed, please install it first. I tried to look for kb976932, and install it. unistall is disabled. I tried uninstall from command line. wusa.exe /uninstall /kb:976932 it says service pack for microsoft windows (KB 976932) is required by your computer and cannot be uninstalled.
View 9 Replies View RelatedWindows 7 Service Pack 1 Keeps Failing
May 6, 2011Is anyone else having problems getting the new service pack for Windows 7 installed? I keep getting an error towards the end of the installation. I dont rememeber the error code but it happed on both my laptops I tried to intall it on.
View 2 Replies View RelatedHow To Install Windows 7 Service Pack 1
Jan 26, 2012I never realized it until just now, when I looked through Windows Update. It's been trying to install the service pack update about a hundred times behind my back since LAST JULY. and every time the status is "Failed."
I had checked because I just installed it last night again and shut down my computerr and everything seemed fine. Then this morning I noticed the windows update icon in the taskbar and saw it again even though I just installed it last night and noticed all the failed installations
Cannot Install Windows 7 Service Pack 1
Aug 10, 2011I get Error Code: 0x800f0826.
View 6 Replies View RelatedWindows 7 Service Pack 1 Won't Install?
Aug 26, 2011I have a PC running windows 7 64-bit and I am finding it impossible to get windows 7 Service Pack 1 (SP1) to install. I start the installation and it seems to run for more than an hour and appears to be installing OK; but when I restart the PC I get an error saying that the installation was not successful and it the rolls back to where it was before I started the installation. I have tried to install a numbr of times, but without success.I have also tried:
* Stopping all non-essential start-up items by disabling them booting on startup using msconfig.
* Stopped all firewall and anti-virus from running during installation
* Run the Windows Update System Readiness Tool (kb947821) before the installation
* Run the Windows Update troubleshooter
* Running the installer from within Windows Update, as a standalone x-64 bit installed downloaded from Microsoft, and as an iso file burned to a DVD
* Run sfc.exe /scannow which reported no errors.
Other Windows Updates seem to install OK - it is just the SP1 update that refuses.[For info: I have another PC that I recently updated (clean install) from XP to Windows 7. I had a similar problem on this PC after I had performed all the other Windows Updates and instaleld my normal suite of programs. SP1 also refused to install. In the end, I reistaleld Win 7 from disc and then immediately installed SP1 before installing any other updates or programs. SP1 installed OK. However I do not want to follow this route on my main PC as it has a load of programs installed which will take a few days to reinstall if I have to start from scratch].
Install Windows 7 With Service Pack 1 On My PC?
Nov 11, 2011I am Still Finding Out how to Show my IDE Hard Disk (Samsung SP0842N)But when I start the Setup, It Redirect to the Load Driver.What Should I Do to Install Windows 7 from my IDE DVD-ROM to IDE HDD?
View 6 Replies View Related
