Unable To Make Applocker Work
Feb 24, 2012
I run windows 7 enterprise as an administrator and I want to make use of applocker. So I start the local security policy, enable applocker and create the default rules. If all is correct I should not be able to run executables in for example "D:Applicationsquickpar" but unfortunately I can. I even create a rule which explicitly blocks "D:Applicationsquickparquickpar.exe", however I can still run it. I even got the application identity service running, so I don't know what is wrong.
View 6 Replies
ADVERTISEMENT
Feb 21, 2012
I an unable to make my floppy drive work on my new computer with windows 7 64 bit. I know there is a card made in England named Catweasel that is supposed to do the job, but they are hard to come by.
View 9 Replies
View Related
Aug 13, 2010
I am trying to deny access to a particular .exe using applocker. I have created a rule and the default rules, and made sure the appIDSvc service is running. My rule is not being enforced. The application runs normally. If I check the event log I can see a bunch of warnings stating appidsvc.dll:AppLocker component not available on this SKU. Not sure if this is a symptom or something else.
View 3 Replies
View Related
Apr 25, 2009
How to Create New Rules in Windows 7 AppLocker ?
View 0 Replies
View Related
Jun 16, 2011
How do I make windows 7 act like windows service pack 2, i have a tv card using pci slots, it doesnt work with windows 7.
View 2 Replies
View Related
Jul 1, 2009
I have a laptop. i install windows7 in it. aafter insatlling it .
my PC is turning off when i try to running on battery.
a blank screen displays and then turning off.
how can i correct it?
View 4 Replies
View Related
Oct 30, 2009
how to make ram work as a graphic card
View 4 Replies
View Related
Jun 13, 2011
My computer has no sound at all and the thing is that nothing is muted
View 1 Replies
View Related
Nov 10, 2011
How can I make edit to work in win 7 x64?
View 2 Replies
View Related
May 16, 2012
How to make generic ink cartridges work on hp printer
View 2 Replies
View Related
Sep 10, 2012
how to make my numeric keapad work in windows 7 on my laptop
View 1 Replies
View Related
Nov 15, 2012
Making novell netware 5.1 work with windows 7. My server is Novell 5.1 The workstations are Xp Pro And 1 is home edition (Which was not compatable with novell but prevailed on that irritating issue.) Now I need to configure a win7 workstation to my server. I know win7 does not support spx ipx protocol at all.
View 2 Replies
View Related
Feb 11, 2013
i am not hearing any sound from my PC and the speakers r connected' what can i do to make it work again
View 1 Replies
View Related
Nov 9, 2012
any time i want to make call it gives me ( sorry you are not allowed to make this call )
View 7 Replies
View Related
Nov 4, 2009
Here's what you need to do for both 32 bit and 64 bit Windows 7 systems:
- Download the 'Windows Mobile Device Center' ( current version is 6.1 ) which you can download it from url...this works for both Vista and Windows 7. I've tried it on both.
- Install the downloaded software but it may not look like it worked on Windows 7 PCs. Vista automatically configures the settings on the bluetooth devices but for those who have Windows 7, here are the things you should do:
- Go to 'Device Manager' from 'Control Panel' -Or- just right-click on Computer Icon and choose 'Properties' and then click on 'Device Manager'.
- You'll see an 'Unknown Device' named 'Bluetooth Peripheral Device'
- Right-Click it and click on "Update Driver Software" -Or- anyway you find it easy to bring up the Update driver window.
- Click "Browse My Computer for Driver Software" button.
- Click "Let Me Pick from a List of Device Drivers on my computer".
- Select 'Bluetooth Radio' from the list if it asked you to select and then in the next window, it will show a list of drivers with Company Names in one list and Drivers in another. In the Company List choose 'Microsoft Corporation', not only Microsoft.
- From the drivers list there may be one or more drivers with the name "Windows Mobile-Based Device Support" with different driver versions. Select one or the latest.
- Ignore any warnings and keep pressing next and then Finish at last. If all goes well, the last screen will show the message that device driver is successfully installed.
Now, after manually updating the driver for your bluetooth device, in 'Device Manager' when you click on 'Bluetooth Radios', it should display one more item which will say 'Windows Mobile-based device support'.There are few more things that you want to pay attention to. If you have already added the device in your 'bluetooth device list' that didn't work, then remove the device and add it again. After you add it, you might need to restart the computer if it gave you a connection problem error message. Every PCs that had Windows 7 and Vista worked after installing this software and I hope it will work for you too.
View 9 Replies
View Related
Feb 6, 2011
Does anyone know a program or a way to make the processor work at a specific frequency?e.g. = if the processor is 1.5GHZ , to make it work at 1GHZ when i want to , using a program.
View 9 Replies
View Related
Aug 29, 2011
How can I make my HP5370C scanner work with Windows 7
View 1 Replies
View Related
May 6, 2012
how to make my 5.1 speaker work when hdmi is not plugin
View 2 Replies
View Related
Jun 5, 2012
How do i make dune 2000 work on windows 7 it won't let me install because of the 64-bit.
View 8 Replies
View Related
Jan 14, 2009
I have a trusty dusty HP Laserjet 3200. There are no W7 drivers for this model yet and the Vista 64 drivers don't work and can't be installed in compatibility mode.
Are there any other drivers out there that will work with the Laserjet 3200 and W7 and give me basic functionality or am I just SOL until HP releases some drivers?
View 29 Replies
View Related
Jun 3, 2011
I 've Windows 7 basically extracted files. I have tired to put it on a dvd and burn it, burning process was fairly easy I thought I've a bootable DVD now.Then I tired it in a desktop computer and set to boot from CD.To my disappointment it did not boot from CD. But when when normally I put it in DVD and and run from Desktop it works pretty well but then there is another problem it has no options as when the normally windows DVD has when they are bootable. So installation works it simply replaced the older files with new one and a folder is created for older files.What i want is bootable DVD so I can use it to format and Install fresh copy.
View 5 Replies
View Related
Jun 1, 2012
when I wire it into a router, there's no internet connection.Tried different ethernet cable, different router port.Still same.Fails when I ping the router (192.168.x.x), but can ping local loop (127.0.0.1)Windows shows the ethernet card as working.Disabled / re-enabled interface. No joy.No obvious mis-configuration in internet options.Wireless is OK.Scanned for viruses (ESET). All cleanStandard Windows Firewall in place. ipconfig/all shows no IP address allocated, no DNS server, no default gateway etc.
View 1 Replies
View Related
Oct 24, 2012
my 50 gb partition has become extended and i am not able to make it logical partion......it is showing that error "there is not enough memory to make the partition" can anyone tell how to de-extend the extended partition to make it unallocated memorry?
View 2 Replies
View Related
Apr 8, 2012
I am in the process of creating a batch file in Windows 7 and I would like to know if there is a way I can allow this to work with the user input of 'q' and 'Q' instead of just Q.
SET /P XX=Type Y/N, then press ENTER:
IF %XX% ==Q GOTO END
IF %XX% ==Y GOTO START
IF %XX% ==N GOTO END
View 4 Replies
View Related
Jul 30, 2010
I have a HP Entertainment PC laptop. It's Windows 7 (upgraded from Windows Vista). When I tap on the touchpad, it won't work as a click. It's so annoying that I have to use the button below the touchpad to click.
View 1 Replies
View Related
Oct 11, 2011
I installed a huawei modem EC221 on a laptop - Windows 7 64bit but I cant seem to get it connected to access the internet?
Do I need to install or update the drivers? Don't seem to have any problems with 32 bit version but 64 bit is driving me nuts
View 1 Replies
View Related
Dec 8, 2010
I just recently bought a new motherboard (old one died), and didn't realize that it had no IDE port on it for easy Windows 7 re-installation (my only available dvd drive is still IDE). After trying to find a friend with one, I ended up trying to make a bootable thumb drive using the Windows 7 bootable USB drive utility and my father's computer, and every single time I've tried to do it, it gives an error right at the end about bootsect.exe saying it isn't bootable.
Asus P5QL-VM, Intel Core 2 Duo q9300, 4gb (2x2gb) ram, seagate SATA hard drive of some sort, GEForce 9800GTX+ gpu.
View 9 Replies
View Related
Mar 28, 2012
Okay, so I got a new computer recently and it worked great on my campus' Wi-Fi network for about a week. Then all of a sudden the stability of my connection dropped down to nothing. For the past several days, I have barely been able to get on the Internet at all and my Wi-Fi signal can never make it above two bars. My roommates' computers and my own MacBook and iOS devices have no problems at all.This problem has been driving me crazy because the primary purpose of this new computer is multiplayer gaming, which of course is the one thing it CAN'T do is play online games. Can anyone think of any client-side reason why the Wi-Fi on a brand new computer would just spontaneously combust, or is this just something I need to talk about with the network administration on my campus?
View 1 Replies
View Related
May 31, 2011
It doesn't seem to work. Every time I click it, it gives me no audio. I have verything set up right so don't bother telling me to go into more properties.Is there a 3rd party program that can handle this instead? The decoder on Windows sucks with my receiver and I want to use the receivers decoder.
View 1 Replies
View Related
Jun 20, 2011
Is there a driver to make my Mustek 1200 scanner work on windows 7
View 1 Replies
View Related
Sep 13, 2010
So, after going through every trick in the book, I was unable to make browsing happen on a 64bit Windows 7 (any and every browser would randomly hang the system completely), so my only option was to switch to 32bit.The first installation failed and got stuck in a black screen with a frozen cursor. After a restart the installer told me I could continue the installation after a reset, so I did that, only to be greeted with the same message. This happened over and over a few times, so I figured it's not going to work and I'll have to make a fresh install. Then something mysterious happens and I'm not yet sure what exactly happened. In any case, the end result was that I still had some of my 64bit installation remaining including some files I downloaded while trying to make it work in addition to my 32bit installation on my other drive (which I was not planning on formatting). The only explanation I can come up with is that I somehow managed to format the wrong drive, not once, but twice.
And this is where my current problem begins. I'd very much like to format the drive with the 64bit stuff, but Windows won't let me. I've tried doing it from the command prompt but it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I'm the system admin! How can I not have sufficient privileges? And what is "elevated mode"? Ok, so on we go to the Disc Manager. This time I'm greeted with "Windows cannot format the system partition on this disk.".Actually, now that I think about it, I suppose booting from the CD might do the trick. Still, for some reason the installer takes its time starting (was much faster in for the 64bit version) and I'm getting tired of playing with the boot order, anyway.So, I'm wondering if there is any way to format a disc with system files from another Windows installation without going through the CD boot.
View 9 Replies
View Related
