Unable To Make Browsing Happen On A 64bit Windows 7
Sep 13, 2010
So, after going through every trick in the book, I was unable to make browsing happen on a 64bit Windows 7 (any and every browser would randomly hang the system completely), so my only option was to switch to 32bit.The first installation failed and got stuck in a black screen with a frozen cursor. After a restart the installer told me I could continue the installation after a reset, so I did that, only to be greeted with the same message. This happened over and over a few times, so I figured it's not going to work and I'll have to make a fresh install. Then something mysterious happens and I'm not yet sure what exactly happened. In any case, the end result was that I still had some of my 64bit installation remaining including some files I downloaded while trying to make it work in addition to my 32bit installation on my other drive (which I was not planning on formatting). The only explanation I can come up with is that I somehow managed to format the wrong drive, not once, but twice.
And this is where my current problem begins. I'd very much like to format the drive with the 64bit stuff, but Windows won't let me. I've tried doing it from the command prompt but it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I'm the system admin! How can I not have sufficient privileges? And what is "elevated mode"? Ok, so on we go to the Disc Manager. This time I'm greeted with "Windows cannot format the system partition on this disk.".Actually, now that I think about it, I suppose booting from the CD might do the trick. Still, for some reason the installer takes its time starting (was much faster in for the 64bit version) and I'm getting tired of playing with the boot order, anyway.So, I'm wondering if there is any way to format a disc with system files from another Windows installation without going through the CD boot.
I upgraded my OS from WIN 7 Home 64-bit, to WIN 7 Prof 64-bit and my browsing speed decreased dramatically. I primarily used Chrome before, but browsing is practically impossible on it now. So now I use Firefox 4 since its been decent with me. I have no clue what went wrong since the upgrade was successful. My router is fine, but browsing speed is just super slow. It wasn't like this before I upgraded. Does anyone know what the problem might be?
and this is the code from the blue screen itself stop 0x00000116 (0xFFFFFA8009B434EO, 0x000000000000000?, 0x0000000000000002) i took a picture of it with my camera but missed that last digit thus the ? below that on the screen was this
atikmpag.sys - address FFFFF88000E5340C base at FFFFF88000E4C000. DateSt?? 4da507aa
im lost i tried searching these codes and some came up with random stuff (some of it worried me like the remote access stuff) and others dont seem to exist at least in a googleable database?
I 've Windows 7 basically extracted files. I have tired to put it on a dvd and burn it, burning process was fairly easy I thought I've a bootable DVD now.Then I tired it in a desktop computer and set to boot from CD.To my disappointment it did not boot from CD. But when when normally I put it in DVD and and run from Desktop it works pretty well but then there is another problem it has no options as when the normally windows DVD has when they are bootable. So installation works it simply replaced the older files with new one and a folder is created for older files.What i want is bootable DVD so I can use it to format and Install fresh copy.
Obviously no one can predict the future but answer based on past experience When you get an own license it's tied to the motherboard.If you upgrade it with a better upgrade only version (retail version) does it become a full license or is it still oem?
I an unable to make my floppy drive work on my new computer with windows 7 64 bit. I know there is a card made in England named Catweasel that is supposed to do the job, but they are hard to come by.
I left my computer on while going out to grab a quick dinner and came back only to notice that it was out of windows and scanning for problems which I did not have anything to do with.I figured it was just some sort of windows update. Then, It showed me an unable to repair message.I've tried entering safe mode, system restore and basically everything there is to hit on upon restart and spamming the "F5" button.
i wanted to reinstall my pc ( something's dident feel right on my pc ) so i copy'd most of my needed stuff, after that i insert my disc which i got from buying this pc ( Microsoft windows 7 home premium 64 bit disc).after the first part ( can't remember when u re-install windows u got a few things listed ( first thing was 100%, then second thing went to 60% and then i had a error) something about " u need internet blahblah" try again.So i tried again but then the part that ( i can't seem to fix) started to being a problem.
" $WINDOWS.~BT " this file i can't open, can't delete and also can't chainge acces to this map , but i can rename it ( getting this error when trying to do the above -" foutcode 0x80070091 "
- I renamed the file and tried to reinstal but then i had the error when ' trying to copy temperary files ' the error told me he can't continieu becouse it can't delete the current file about it.
- i tried chkdsk but it only shows i get error, not what i shoud do against it.( also the window to fast to read the 1 line which starts whit ' fault....'
- also tried f2 when setup, i tried safe mode, also tried starting my pc from the discs on so the windows itself+programs wont start before the disc. i can't reinstal, i can't delete that file, the only thing to do is take it to the shop
I run windows 7 enterprise as an administrator and I want to make use of applocker. So I start the local security policy, enable applocker and create the default rules. If all is correct I should not be able to run executables in for example "D:Applicationsquickpar" but unfortunately I can. I even create a rule which explicitly blocks "D:Applicationsquickparquickpar.exe", however I can still run it. I even got the application identity service running, so I don't know what is wrong.
when I wire it into a router, there's no internet connection.Tried different ethernet cable, different router port.Still same.Fails when I ping the router (192.168.x.x), but can ping local loop (127.0.0.1)Windows shows the ethernet card as working.Disabled / re-enabled interface. No joy.No obvious mis-configuration in internet options.Wireless is OK.Scanned for viruses (ESET). All cleanStandard Windows Firewall in place. ipconfig/all shows no IP address allocated, no DNS server, no default gateway etc.
my 50 gb partition has become extended and i am not able to make it logical partion......it is showing that error "there is not enough memory to make the partition" can anyone tell how to de-extend the extended partition to make it unallocated memorry?
Yes, I have read the many network issues associated with Windows 7 64 bit Computers(as with other OS's).Have have tried many suggestions... everything seems to be set the way it is suppose to be, but I am still unable to share files between two Windows 7 64 bit Computers.
My Equipment:
Two new Windows 7 Premium 64 bit Computers (Service Pack 1), one is a Dell XPS 8500, the other built by NCIX... both are Intel i7 processors. One is using an add on NIC card (Intel) and the other using the internal NIC card(Realtek drivers).I have attempted to create a homegroup with both computer with success. The other computer was able to join the homegroup also with success.The issue is that I can see both computers listed in the network and sharing center, also in windows explorer on each computer. If I double click on either computer icon and either computer, I get this error message (see ntw1.png)
Fresh copy of windows and it's giving me a BSOD. Attached are the files from the SF Diag tool.ystem spec:AMD Phenom II X6Ripjaw 8GB DDR3 1600 MSI 890FXA-GD65EVGA GTX 580 HD
I have to send my drive in to OCZ for an RMA and I asked how long it would take because I can't wait too long for the RMA to happen.So I said I could still return the drive to the store, however the tech support rep., said I could use my recovery back up and put it on another drive as long as the other components of my build are the same.
I just recently bought a new motherboard (old one died), and didn't realize that it had no IDE port on it for easy Windows 7 re-installation (my only available dvd drive is still IDE). After trying to find a friend with one, I ended up trying to make a bootable thumb drive using the Windows 7 bootable USB drive utility and my father's computer, and every single time I've tried to do it, it gives an error right at the end about bootsect.exe saying it isn't bootable.
Asus P5QL-VM, Intel Core 2 Duo q9300, 4gb (2x2gb) ram, seagate SATA hard drive of some sort, GEForce 9800GTX+ gpu.
Okay, so I got a new computer recently and it worked great on my campus' Wi-Fi network for about a week. Then all of a sudden the stability of my connection dropped down to nothing. For the past several days, I have barely been able to get on the Internet at all and my Wi-Fi signal can never make it above two bars. My roommates' computers and my own MacBook and iOS devices have no problems at all.This problem has been driving me crazy because the primary purpose of this new computer is multiplayer gaming, which of course is the one thing it CAN'T do is play online games. Can anyone think of any client-side reason why the Wi-Fi on a brand new computer would just spontaneously combust, or is this just something I need to talk about with the network administration on my campus?
I'm currently doing a clean install of windows 7 64 bit on my 32 bit XP computer, I used the upgrade advisor beforehand and it said a lot of my programs where 64 bit compatable, and a large chunk of them are on my other hard drive (the one im not installing windows 7 on). After the install is finished will they be useable or will I have to reinstall them?
i have a problem with my old pci Avermedia98 tv tuner with bt848 or 878 chip. I have been using this tv tuner in windows xp and in windows 7 32bit version(manual installation of drivers in device manager). Now i have installed 64bit Windows 7 and i cant make my tv tuner to work. I did manage to install Audio and Video capture drivers in device manager and i have no more yellow alert signs in there. But when i try to watch tv on tuner application it says that a Capture filter is missing(error: can not locate capture filter) i guess i need this capture filter driver for 64bit windows 7 and than force install it in device manager. I did already tried many drivers from lots of driver web sites, i tried Hauppauge drivers and the drivers i used on 32 bit windows 7. Nothing works.
I'm running the Windows 7 64bit, the printer is connected to the XP. That printer is not a network printer (Hp 5740,and 5520) , and shared from a Desktop running WinXP 32 bit. I cannot install it via network access ?
When I restored my Windows 7 64bit. After that I was unable to uninstall game what I had uninstalled long time ago. I get some kind error when I try, well here isn't any folder of that game on my HDD. But still my Windows 7 shows like I have that game still installed on PC, anyway to remove it?
I've always wondered if background tasks continue to run while the PC is in sleep mode or hibernation. Are there actions that I can take to wake it up? What happens if I'm running a scan and the PC goes into hibernation or sleep mode?
MY Laptop wont start windows normally and keeps on recommending start up repair. If I launch the repair, will it be automatically reformat? will I lost files on it?
I'm trying to move a file from my desktop to a folder on my Hard Drive (Internal) but everytime i attempt to do this it says, "Window's Can't Create a Shortcut here, do you want the shortcut to be placed on the desktop instead?". This have never happened to me before and frankly I'm a little perplexed at why this is happening.
I have windows 7 Home basic installed in my Laptop. When i bought it, it had only two partitions one for c: and one for recovery... i tried creating a partition but when i do so this appears:
And when i click yes on this alert, this appears:
I want to create partition without losing OS and recovery files in d: drive..
i'm trying to run windows 7 64bit on my sony vaio vgn-fz21m and having a huge issue. Well all drivers seems to work fine, but laptop keyboard stoped working after instaliation. I tried to connect a USB keyboard adn it was just fine, working perfectly, but my laptop keyboard doesn't respond. The previous version was Win 7 32 bit and it worked, but 32 bit supports only 3 gb of ram. I want to use all my 4 gb ram and well i can't.
