I am trying to deny access to a particular .exe using applocker. I have created a rule and the default rules, and made sure the appIDSvc service is running. My rule is not being enforced. The application runs normally. If I check the event log I can see a bunch of warnings stating appidsvc.dll:AppLocker component not available on this SKU. Not sure if this is a symptom or something else.
View 3 Replieshow to deny internet access to all my programs by default? I mean that internet access is completely blocked to my existing programs, files, etc. and to all future programs that I might install or files that may be created.
And ONLY those Programs and Files have access to the internet that I allow and give permission to. P.S. I have Kaspersky Internet Security 2012, but can't seem to figure out the appropriate settings..
I've got a folder shared to specific user on my Windows 7 laptop.When i try to access that folder over lan, from my Vista laptop, it doesn't ask me for user&pass, but just gives "Access denied" error message.If it's set as shared to everyone, then i can access it just fine. But i want it to be accessible only after password protection over lan. Both laptops are set to "WORKGROUP" and here are the network settings for the windows 7 one
Network Discovery: ON
File and printer sharing: ON
Public Folder Sharing: OFF
File sharing connections: Enable 40 and 56 bit encryption as well
Password protection sharing: ON
HomeGroup connections: Use user accounts and passwrods to connect to other computers
How to Allow or Deny Access of Task Manager for a Specific User ?
View 0 Replies View RelatedI am looking for a way to prevent writing to all removable devices. I have found the setting in group policy and enabled it. However, admin credentials are requested and if entered correctly, the user can write to the external drive. I want to configure this to allow writing to a removable device ONLY if the user is in the correct security group or a member of the domain administrators. In other words, this policy would apply to all users and be denied to the security group. We are still in a 2003 domain, although most of our DCs are now Windows 2008 R2. This policy would apply only to users logging in to our Windows 7 machines.
View 5 Replies View RelatedI wanted to prevent the guest users on my laptop from accessing D: drive. So from my admin account, I set the permissions on my D: drive to deny all for the Users group, without even looking at all the permissions listed. I thought these permissions would affect only the non-admin group....but I went wrong and now cant access any file in D: even from the admin account.
View 5 Replies View RelatedI wanted to prevent the guest users on my laptop from accessing D: drive. So from my admin account, I set the permissions on my D: drive to deny all for the Users group, without even looking at all the permissions listed. I thought these permissions would affect only the non-admin group....but I went wrong and now cant access any file in D: even from the admin account.
View 5 Replies View RelatedHow to Create New Rules in Windows 7 AppLocker ?
View 0 Replies View RelatedI run windows 7 enterprise as an administrator and I want to make use of applocker. So I start the local security policy, enable applocker and create the default rules. If all is correct I should not be able to run executables in for example "D:Applicationsquickpar" but unfortunately I can. I even create a rule which explicitly blocks "D:Applicationsquickparquickpar.exe", however I can still run it. I even got the application identity service running, so I don't know what is wrong.
View 6 Replies View RelatedWhile attempting to set up a new computer on our network I seem to have lost access to many documents and lost permission to many folders. While setting up a new computer we began playing with what programs and documents the new computer could access. (The new machine is to be used for clients, and for internet/printing privileges) we did not want the computer to access anything on the network except the printer.
We did the above by right clicking on the public folders where we kept our documents, opening the security tab and restricting the permissions. We would then deny the new computer access via the ownership tab. This seemed to work as the new computer on the network had no access to our files but could still print to the printer on the shared network. I wasn't on the computer at the time, (my lackey status didn't permit as such) and I think somehow the other person managed remove our access to the programs/documents.
I think they did this by changing the admin privileges to deny for all. I am guessing that's what happened because now when I try and take ownership of the files I am unable to open them. It will let me take ownership of the files but then still says me access is denied when I try to open any of the selected files of documents. (does not prompt for password). In short, Is there a way to reestablish my admin privileges after what appears to be simple mistake on which account was selected?
I would like to block printing on a particular machine. Is this possible? I just want a certain machine to simply not be able to print.
View 2 Replies View RelatedAnybody know how to deny users access to the Manage Wireless Networks link from the Network and Sharing center?
View 5 Replies View RelatedShe was saying that the person who's computer I was replacing uses there shared HP Deskjet 6540 to print most documents when really it should only be used to print one type: 'lables.docx.'
So this got me wondering whether it were possible or not to deny printing rights to the 6540 from applications such as Outlook - whilst keeping them in word and program 'x' but also allowing Outlook to print to other printers in the office.
Now I think even before asking that this is probably not possible but I need to know either way.
Somehow a drive on one of my work computers got the security permissions for "everyone" set to deny. I need some type of work around to reset the permissions or a way to recover the data from the drive so I can format it. The bottom line is I need the data, so whatever I can do to make that happen I will do.
View 5 Replies View RelatedI had users passing around a computer that ended up with a bunch of settings being screwed up which made me want to deny all regular domain users but not administrators. I did this as a local group policy on the computer under gpedit where i denied users and to my horrifying experience no users can log in, not even local admin.
View 2 Replies View RelatedI have a Dell Inspiron 545s Desktop - Intel Duo Core 2.93, 6gb RAM, 720gb HD, 64bit Windows 7
I get the message: (every time I try and open a folder on my c/drive - Can't access Windows Explorer folder on the taskbar and any other folder or file by double clicking it. I can open them by right clicking, then open)
"this file does not have a program associated with it for performing this action. Please install a progra or, if one is already installed, create an assocation in the Default Programs control Panel".
I can open applications. But, I can not open the folder for them lets say in c:/program files -- the only way to open them is by rightclicking, then open. If I double click, I get the above error message. (same issue with "my documents", "My pictures", etc).
Included with the above problems: I now, can not access User Accounts. When I go into Control Panel, click User Accounts.. I can not manage existing ones, nor can I "Add or remove user accounts". I click the link and nothing happens.
I have someething built into the computer called "Dell DataSafe Backup". Its a recovery partition/part of the HDD that saves all my files for a recovery. However, I can NOT access it. I click the "Dell DataSafe" in my taskbar and nothing happens..
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies View RelatedAre there any Access database dudes that know if using taskkill.exe to close access (to close a database at night so it can compact) is a bad thing to do? I need to have my database closed at night and I always forget, taskkill.exe works, but my colleague, who designed the database, says that force quitting access breaks the database.
View 5 Replies View RelatedI have one PC running Vista (home basic), one running XP (professional) and one running Windows 7 (home basic). There is a printer connected to the Vista box, which is shared.
On the XP box I can both see and use the printer on the Vista box (i.e. a "net view \vistabox" shows the printer, and under "printers and faxes" I can install and use it).
On the Windows 7 box, however, I can see the Vista box (i.e. a "net view" shows it in the list of available PCs on the network) but a "net view \vistabox" gives me an "access denied" error.
The Windows 7 machine has a password on it, the Vista and XP machines don't. All machines are on the same workgroup name (which is "WORKGROUP"). On the XP box I don't need a password to access the shared printer on the Vista machine; it just works.
Extensive Googling has failed to render enlightenment, nor has browsing this forum. I'm sure it has something to do with security and passwords, somewhere, somehow, but I have no idea in which direction to look for it, let alone fix it. I have also read some things about workgroups and homegroups not being the same in Windows 7, but I'm not sure if this is correct (and if so, relevant).
This question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
i have my (main) desktop hooked up with mapped folders which my two other computers (laptop wireless and wired and desktop wired) can access and do what i intended them to with sharing restrictions, etc.However, my 2nd laptop that after a struggle connecting it to the homegroup will not allow access to any mapper folders keeps popping up with a login screen for THAT laptop, and my others will not connect to it properly.
View 2 Replies View Relatedi kept security to c drive now i cant change it
View 1 Replies View RelatedRecently, a "Limited Access" signal has been coming up beside my internet access signal, even though it's got full access and the wireless connection is fine .
View 4 Replies View RelatedI created a guest account. I didn't wan't the d drive accessable to the guest account. Some how I now can't access d drive at all.
View 1 Replies View RelatedI am attempting to access an application.exe file on my desktop. Each time that I click on it the Windows message, "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." pops up. I am the system administrator so this should NOT be a problem but apparently many out there are dealing with this as well. I can delete, move and even copy the file but I cannot run it. There is no option for override with password or grant permission. It just says that I cannot run it. Also, the system I am running is Windows 7 Ultimate x64.
View 8 Replies View RelatedAccording to what I've read, Access 2010 uses the same database format as Access 2007. So this should mean I can open and run a 2007 database (with a lot of VBA code) in Access 2010 with no trouble, yes?So why do I have the feeling that something is not going to work? Is it because I have been through to many Access upgrades?
View 4 Replies View RelatedI haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
What am I doing wrong here?
laptop so I reformatted his laptop and when I try to to connect to the internet via WiFi I could connect but I would have limited access. I can connect to the internet with my old laptop, iphone and xbox. But I cant connect to my newly reformatted laptop
View 9 Replies View Relatedi removed authentication, system and user permission to access the drive in security in properties.now iwant to apply them ut cant find security tab in properties.
View 1 Replies View RelatedWhy is it that I can do anything to my Xp laptop shares from Windows 7 but Xp asks for a username and password to access Win?
Am I supposed to know what this username and password is? Did I create a username and password while not paying attention?
I've turned off password protected sharing in advanced sharing settings, turned on file and print sharing, both computers are joined to WORKGROUP. I went through the file sharing setup wizard on Windows 7 which spat out a password at the end but like so what? There's no username to go with it and it doesn't work if you enter that password from Xp anyway.
Can someone please put me on the right track here?
I hope that MS realise that there's an ocean of idiots like me that just want to copy a file from PC A to PC B at home and that the wizard should set all this up for us and not make us google around for half an hour just to find out how to copy a file from box to box. Unless it's intentionally not backward compatible?
I wanted to create a new user with standard access and only give them access to my "C:" (programs) and not my "D:" (downloads) so after creating the user, I went to security settings under D: drive/properties and I denied "Authenticated Users". I obviously know now that that wasn't the right thing to do. After that happened, my admin account didn't have access to drive D. So I went back and switched it back to "Allow/full control" and my admin acct has access to my D drive now but there are files that are in the drive (not in folders) that are still showing denied when trying to open and 1 folder is also being denied. When I see the security settings on these files/folder it says "You do not have permission to view/edit...etc"
View 1 Replies View Related