I wanted to prevent the guest users on my laptop from accessing D: drive. So from my admin account, I set the permissions on my D: drive to deny all for the Users group, without even looking at all the permissions listed. I thought these permissions would affect only the non-admin group....but I went wrong and now cant access any file in D: even from the admin account.
View 5 RepliesI wanted to prevent the guest users on my laptop from accessing D: drive. So from my admin account, I set the permissions on my D: drive to deny all for the Users group, without even looking at all the permissions listed. I thought these permissions would affect only the non-admin group....but I went wrong and now cant access any file in D: even from the admin account.
View 5 Replies View RelatedWith my Windows 7 residing on it's own on a new SSD drive, now I want to be able to fully access my 2nd drive, my old XP drive from the default Admin acct. created on Windows 7 initial install.
I can read from the 2nd HDD, copy to the new drive, but can't read / write, it just says I don't have permission.
My research so far reveals this TrustedInstaller does not give full blown permissions to a 2nd drive in a situation like this. I am thinking there has to be a way around this without having to be logged in as the built-in Admin always. I just haven't found it yet. It's rather confusing this security and file permissions. I ran into this problem with XP before when I took and switched out disks, and I just had to reset the permissions globally for the entire disk somehow.
I might log in again as the built-in admin and see if it gives me options to change settings for the acct. I think that is the way...
I am trying to deny access to a particular .exe using applocker. I have created a rule and the default rules, and made sure the appIDSvc service is running. My rule is not being enforced. The application runs normally. If I check the event log I can see a bunch of warnings stating appidsvc.dll:AppLocker component not available on this SKU. Not sure if this is a symptom or something else.
View 3 Replies View Relatedhow to deny internet access to all my programs by default? I mean that internet access is completely blocked to my existing programs, files, etc. and to all future programs that I might install or files that may be created.
And ONLY those Programs and Files have access to the internet that I allow and give permission to. P.S. I have Kaspersky Internet Security 2012, but can't seem to figure out the appropriate settings..
I've got a folder shared to specific user on my Windows 7 laptop.When i try to access that folder over lan, from my Vista laptop, it doesn't ask me for user&pass, but just gives "Access denied" error message.If it's set as shared to everyone, then i can access it just fine. But i want it to be accessible only after password protection over lan. Both laptops are set to "WORKGROUP" and here are the network settings for the windows 7 one
Network Discovery: ON
File and printer sharing: ON
Public Folder Sharing: OFF
File sharing connections: Enable 40 and 56 bit encryption as well
Password protection sharing: ON
HomeGroup connections: Use user accounts and passwrods to connect to other computers
How to Allow or Deny Access of Task Manager for a Specific User ?
View 0 Replies View RelatedI am looking for a way to prevent writing to all removable devices. I have found the setting in group policy and enabled it. However, admin credentials are requested and if entered correctly, the user can write to the external drive. I want to configure this to allow writing to a removable device ONLY if the user is in the correct security group or a member of the domain administrators. In other words, this policy would apply to all users and be denied to the security group. We are still in a 2003 domain, although most of our DCs are now Windows 2008 R2. This policy would apply only to users logging in to our Windows 7 machines.
View 5 Replies View RelatedSomehow a drive on one of my work computers got the security permissions for "everyone" set to deny. I need some type of work around to reset the permissions or a way to recover the data from the drive so I can format it. The bottom line is I need the data, so whatever I can do to make that happen I will do.
View 5 Replies View RelatedMy husband and I have been trying to get pictures from our camera (Fuji FinePix S3400) to the computer with the supplied USB lead. WE have been able to do so by taking the SD card and shoving it into the computer but we can't do so with the lead which we prefer to do. It seems wrong that we can't do that! With lots of going into all jigging around into files and setting we keep getting the message, "Access is Denied". We have even got into security of the folder and put in "Authenticated Users". We have an Acer that was bought with Vista and then converted to Win 7.
View 9 Replies View RelatedDell Desktop Windows XP 32 bit IE7 no free memory to download anything. Can't remove programs, no security tab. No windows installer in safe mode. I've confused myself now. Cannot access any file due to permissions. Need to know how to remove programs, then reset permissions. I've been trying to work on this for two days. Can't seem to make sense of any of the great information and tools available, because I don't know which to address first.
View 1 Replies View Relatedtrying to set-up some specific folder permissions here at work.on this one folder i would like a specific user to only be able to create files, read them but not be able to modify any existing files.how do i set-up the folder permissions for this? >advanced security settings would it be selecting the following:
-traverse folder/execute file
-list folder/read data
-create files/write data
and then applying it to 'this folder' only?
I am trying to transfer all my old Windows XP based folders, files, music (itunes), pics etc etc stored on an external hard drive (buffalo mini station usb 3.0) to my new laptop that uses Windows 7. Only I am confronted time and again with these "access denied", "no permission" messages. I have adjusted security settings on some of the folders (on the external drive) to take ownership (which works) but surely you don't have to do this for every folder and all it's sub folders? This would take forever particularly on music folders as I have a lot i.e. each albumn is a folder. I just want to drag and drop my old folders from the external hard drive onto my new laptop using Explorer. I have even adjusted UAC settings down to lowest level, re-booted, but this does nothing.
View 4 Replies View RelatedI have just added a SSD with a clean install of Windows 7 Pro 64 to my Dell XPS 630i.I designated the SSD as my C drive and kept the original 500GB HDD as a slave under XP Pro SP3 (as drive E) for use as data storage. The issue I am having is accessing those data files. I have administrator access (sole user) but I get an incorrect permissions message when I attempt to access any of the HDD files.
View 4 Replies View RelatedI have a standard HP Pavilion w/Windows 7 Home Premium . Boots to black screen with cursor only right after Welcome screen appears. The CTL/ALT/Del will bring up screen with Task Manager, etc. System will boot to Safe Mode but will not allow me to access Control Panel or any other items on the right side of Start window with the message "Windows cannot access.....You may not have appropriate permission to access this item"
Have been researching this for two days and have tried Repair Your Computer options offered in Windows 7 and restating from numerous prior restore points with the same result. Before I go through a full system restore. Most of the possible solutions I came across in my research are not possible to try because of no access to Control Panel.
I can't access my word files or word itself, I've uninstalled it and now I can't install a new version as I get messages saying I don't have sufficient permission. I'm not sure how to configure my user permissions. How I do this?
View 4 Replies View RelatedI'm logged on as Administrator; it is only account on the computer.Recently I found I could not access many system admin tools and when I try I get error of you may not "have the appropriate permissions"This applies to "Services" "Component Services" "Computer Management" Also get same error when I click on Desktop Computer Icon and select "Manage"Running Win 7 Home with all latest updates.
View 5 Replies View RelatedConstantly having to "play games" with Permissions and Security and "denied access". First of all, I don't understand why Windows 7 Home Version is NOT designed for home use but apparently for some large corporation the size of...uh..maybe...MICROSOFT? Why isn't a HOME version created for use in a home where we don't have an "Administrator" and we aren't dealing with CIA files or hiding from our spouses.(usually).
View 3 Replies View RelatedI have two computers running Windows 7 and both belong to a Homegroup. From one computer I can access both computers and from the other I can't access the other. It say's I don't have permission but I gave it everyone permission when I shared it. I can't figure out why?
View 1 Replies View RelatedI was trying to lock off my external hard disk to everyone aside from my administrator account on my own PC. It seems that in the process I ended up locking it off completely. It now shows up simply as Local Disk - Unlabeled Volume 7, without displaying any information about it, and when I check its properties it shows no information about it,and the Security tab is missing. I tried to take ownership of it using take own from cmd, with administrative privileges enabled and UAC disabled. That gave me an access denied message. How I could access it, or reset the permissions? I'm using Win 7 Ultimate 64-bit.
View 4 Replies View RelatedI have turned on the Guest account, and I need to set program and folder access permissions. I have google'ed the way to set file and folder permissions, but I am having some difficulty with some of the things that I need.
For instance I need to:
-deny access (just deny listing the directory structure; can read & write so apps can work) to C:* , Control Panel, and a few other locations
If I try to deny dir listing for Guest on root C: , it gives me a couple warnings and will not set permissions for "program files, program files x86, windows" folders even though I am the admin. After those initial issues, it continues to set the permissions for all the rest of the files. If I log into the guest now, goto Computer and double click on C: , it now says "access denied", which is good but if I type in the address bar up top "C:users", it will goto that location; not display the access denied message. I am using the Home Premium edition so I cannot use the Group Policy Editor..
I just reformatted my C: partition running windows 7.All my data is on the D: partition.I took ownership of all the files in D: Their is one folder I still don't have permission to open the files inside which are graphics for a website I am creating..The error message I get is "Windows photo viewer can't open this picture because you don't have the correct permissions to access this file location".so I ran the command prompt as administrator located the folder in question are ran "takeown /R /D Y /F *"It has given me full control of the files and made me the owner but still the error message comes up.
View 7 Replies View RelatedMy PC was somehow configured so that I cannot copy files from the internal hard drive to a USB pen drive (e.g., to make a back-up).
When I try to do this, I get the following message: "Destination Folder Access Denied You need permission to perform this action."
There is definitely enough room on the USB drive. The USB drive is configured with a password, which I entered correctly after plugging in the drive. After doing this, I am able to see the files from the drive. The configuration is such that I can copy files from the USB drive to the PC's hard drive, but I can't copy in the other direction, which is what I need to do.
This sounds like a Windows permissions issue to me. I have taken ownership of the file in question, and I have assigned full control to that file.
After installing 7 32bit over Vista, 250GB HDD, 7 does now not recognise,patition3 which was "ACERDATA-D" 107GB + "ACER-C" O/S 111GB. Windows tools allow me to do nothing,however i have found a program that can find and mount "non visible Partitions" I have tried formating this Partition,but its write protected? (tried to un write?) Also how can i make this Part visible to windows. I've just realised that i have to Mount this partition? as the 2 others also show,10GB recovery & 3GB allocated
View 4 Replies View RelatedI had to change the owner and permissions of the C:Windows folder in order to install a particular software. When I changed these settings, I had the "Replace owner on subcontainers and objects" box checked.I figure its safe to say I made a mistake. Does anyone know how to return all ownership and permissions to default values without doing a full install of the OS? I tried creating a recovery disc and running a repair, but it didn't fix the issue.I also have no image to restore to.
View 2 Replies View RelatedIm trying to convert a drive on my laptop from FAT32 to NTFS as recommended by Microsoft baseline security analyzer. When I type in convert E: /fs:ntfs command in the cmd prompt I get a message that I dont have permissions to do so. How, on my own machine do I get permissions or what do I type in to get to root? I know that on Linux machines you type in su to enter password to get to root user but Im not sure how on my own windows machine. I am a 1st year IT student and am learning. I thought I had all the permissions since I am logged into my machine as administrator.
View 5 Replies View RelatedI have a WD myBook that I have been using to store files on. It is connected via a USB to my wireless router. In explorer I can see it in my network section as well as map a drive to it. However, intermittently, it does not allow me to write or delete files on it. I know computers aren't suppose to do intermittently, but that is what it is.There are brief times when I can add and delete items. I just added one file about 20 minutes ago. For several hours before that, it was locked, and it is now again locked.I can go for days without any issues, and then I get a night like tonight where I can't get anywhere.
View 1 Replies View RelatedI was trying out the admin permissions for my external drive and I messed up. It took all of my privileges away and I wasn't able to access it at all. I was able to get some of it back, but I am still having problems getting full control of the drive. I am seeing a pad lock on the first tier of folders. How do I remove that padlock showing?
View 2 Replies View RelatedToday I dual booted Windows 7 and Windows 8. Everything was fine, until I decided I wanted to point my music collection in Win8 to my Win7 music folder (turns out you can't do this right now anyway in the music app). I wanted to make sure that win8 didn't screw with any files so I changed the whole drive permissions in Win8 to have read access, but not write access of my Win7 drive. I did the vice versa for Win7.When I restarted my system I got a "windows created a temporary paging file..." error message and figured out its because I screwed with my file permissions. To fix it I just need to change the permissions back, however now they are all greyed out (even in the (hidden) Administrator account) and I can't figure out how to change the permissions back.
View 1 Replies View RelatedI am at my wits end with using windows 7. I am sure this must have been beaten to death on here and I am sorry but I am not sure how to word it to search for the answer.I hook up a spare HD to the USB with the same operating system and every ******** file I try to open on it I have to adjust it for administrator and da da da and I am sick of this, it will take forever to look at the data. How the heck to I fix this once and for all so I can just open what i want to ? I am the administrator...I don't want to be flagged about administrator anything any more.Secondly, if I want to back up data on a stick and there is already a folder of the same name it asks me if I want to merge it. No I dont so I change the name of the file to something different and it STILL always tells me there is a folder that has the same name do you want to merge i
View 3 Replies View RelatedI was on the permissions for drive C, because I didn't want standard user changing setting on there and when I clicked OK windows came up with an error and then when I tried to go back on to the permission change window it said " access denied" and I Now can't Change it back, I Can't do anything with admin features and I can't system restore.
Computer info:
Acer Aspire 5536
Windows 7 Home Premium