Drive Access Restricted Removed Access?
Jan 27, 2013i removed authentication, system and user permission to access the drive in security in properties.now iwant to apply them ut cant find security tab in properties.
View 1 Repliesi removed authentication, system and user permission to access the drive in security in properties.now iwant to apply them ut cant find security tab in properties.
View 1 RepliesI want to set up a new user account, and I would like to limit it so that the new user can only see and write to a single folder. I do not want them to be able to view what else is on the machine, and I would like to be able to easily check how much space they are using etc. additionally I have a SSD and a hard disc, with windows installed to the SSD, but I would like the new user to be restricted to only the hard disc. Is this possible, and if so how can it be done.
View 2 Replies View RelatedI have 10 pcs on a LAN workgroup. They are mixed Windows 7 and xp. I have set the file sharing, net discovery etc on win 7 on and password protection, firewall off.They all have user accounts like pc1, pc2,...pc10 and I have also created the account of the pc I want to access the restricted folder to the pc that shares it.I have set the ownerships on Windows 7 machines too. I can access the folders on XP machines from the Windows 7 successfully. When I try to set a user-restricted shared folder to a Windows 7 pc and access it from XP I fail. It says that I do not have sufficient rights to access the folder, contact the network admin. I can only access to the folder by setting it available to "everyone" or "guest" read/write but that s not what I want.
View 4 Replies View RelatedI had the win 7 antivirus, virus on my laptop, i used this site for instructions on removing this virus, I followed the instructions and it seems to have removed the virus. Now when I start the laptop the programs pinned to my startup menu do not start and if I want to start a program I have to start by right clicking and starting as system admin. Not sure what to do now to fix this.
View 6 Replies View RelatedI created a guest account. I didn't wan't the d drive accessable to the guest account. Some how I now can't access d drive at all.
View 1 Replies View RelatedI have a Dell Inspiron 545s Desktop - Intel Duo Core 2.93, 6gb RAM, 720gb HD, 64bit Windows 7
I get the message: (every time I try and open a folder on my c/drive - Can't access Windows Explorer folder on the taskbar and any other folder or file by double clicking it. I can open them by right clicking, then open)
"this file does not have a program associated with it for performing this action. Please install a progra or, if one is already installed, create an assocation in the Default Programs control Panel".
I can open applications. But, I can not open the folder for them lets say in c:/program files -- the only way to open them is by rightclicking, then open. If I double click, I get the above error message. (same issue with "my documents", "My pictures", etc).
Included with the above problems: I now, can not access User Accounts. When I go into Control Panel, click User Accounts.. I can not manage existing ones, nor can I "Add or remove user accounts". I click the link and nothing happens.
I have someething built into the computer called "Dell DataSafe Backup". Its a recovery partition/part of the HDD that saves all my files for a recovery. However, I can NOT access it. I click the "Dell DataSafe" in my taskbar and nothing happens..
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies View RelatedAre there any Access database dudes that know if using taskkill.exe to close access (to close a database at night so it can compact) is a bad thing to do? I need to have my database closed at night and I always forget, taskkill.exe works, but my colleague, who designed the database, says that force quitting access breaks the database.
View 5 Replies View RelatedI have one PC running Vista (home basic), one running XP (professional) and one running Windows 7 (home basic). There is a printer connected to the Vista box, which is shared.
On the XP box I can both see and use the printer on the Vista box (i.e. a "net view \vistabox" shows the printer, and under "printers and faxes" I can install and use it).
On the Windows 7 box, however, I can see the Vista box (i.e. a "net view" shows it in the list of available PCs on the network) but a "net view \vistabox" gives me an "access denied" error.
The Windows 7 machine has a password on it, the Vista and XP machines don't. All machines are on the same workgroup name (which is "WORKGROUP"). On the XP box I don't need a password to access the shared printer on the Vista machine; it just works.
Extensive Googling has failed to render enlightenment, nor has browsing this forum. I'm sure it has something to do with security and passwords, somewhere, somehow, but I have no idea in which direction to look for it, let alone fix it. I have also read some things about workgroups and homegroups not being the same in Windows 7, but I'm not sure if this is correct (and if so, relevant).
This question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
i have my (main) desktop hooked up with mapped folders which my two other computers (laptop wireless and wired and desktop wired) can access and do what i intended them to with sharing restrictions, etc.However, my 2nd laptop that after a struggle connecting it to the homegroup will not allow access to any mapper folders keeps popping up with a login screen for THAT laptop, and my others will not connect to it properly.
View 2 Replies View Relatedi kept security to c drive now i cant change it
View 1 Replies View RelatedRecently, a "Limited Access" signal has been coming up beside my internet access signal, even though it's got full access and the wireless connection is fine .
View 4 Replies View RelatedI am attempting to access an application.exe file on my desktop. Each time that I click on it the Windows message, "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." pops up. I am the system administrator so this should NOT be a problem but apparently many out there are dealing with this as well. I can delete, move and even copy the file but I cannot run it. There is no option for override with password or grant permission. It just says that I cannot run it. Also, the system I am running is Windows 7 Ultimate x64.
View 8 Replies View RelatedAccording to what I've read, Access 2010 uses the same database format as Access 2007. So this should mean I can open and run a 2007 database (with a lot of VBA code) in Access 2010 with no trouble, yes?So why do I have the feeling that something is not going to work? Is it because I have been through to many Access upgrades?
View 4 Replies View RelatedI haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
What am I doing wrong here?
laptop so I reformatted his laptop and when I try to to connect to the internet via WiFi I could connect but I would have limited access. I can connect to the internet with my old laptop, iphone and xbox. But I cant connect to my newly reformatted laptop
View 9 Replies View RelatedBackground: I have a WinXP desktop machine with a hard drive that may have a virus/trojan/rootkit/etc. Normal scans on the WinXP machine with MSE or ThreatFire have not discovered the problem. But the best way to scan a drive is to remove it and treat it as a purely 'dummy' data drive plugged into a usb drive dock and run the scan from a clean machine. This way any infected programs and/or O.S. on the drive will have no control to mask or hide themselves. My other computer is an HP Windows 7 laptop. So I removed the hard drive from the WinXP machine and via the USB drive dock and the Windows 7 laptop saw the WinXP drive icon appear. However, double-clicking that icon results in the popup window message[CODE]
View 4 Replies View RelatedI'm really hoping I find an answer to this question besides the one I've found on the internet a hundred times over (That's not a good idea, you shouldn't do it).
My question is: Is there a way to allow a user to create/edit files in the C drive (system drive), and in the Program Files contained there? Let's assume that this user is not only a local admin, but a domain admin as well.
The reason for this is I work for a company that does a lot of editing within these areas of Windows. We need to be able to create and edit files where they are stored. I know one way around we've found is to copy the item out of the folder, edit it, and put it back, but this is a pain in the butt.
I also know that most program need to "run as admin", so that's not the problem either. I've given this user every right and permission in the Security tab of the C drive, and had it propagate down through all files, folders, and sub-folders, and still I'm hit with an error that says "Access is Denied" or another one saying that I don't have the right privileges.
Please, if anyone knows how to change this in 7 it would be much appreciated. I know that this worked in XP, and I'm not looking for someone to tell me "this is a bad idea so don't do it", or "maybe it didn't work right in XP". I have seen enough of these.
UPDATE: I have been playing around with saving office and wordpad documents into the C drive, and into the Program files. It seems that I'm able to do both now (for some odd reason), but I still receive intermittent errors when trying to edit or copy/paste or cut/paste from one location to another.
i cant access my c drive and even when i log in with administrator rights it says it access denied.im using windows 7 on a dell inspiron.ive tried numurous attemps from serching for answers on the net but nothing has worked.ive tried net user administrator /active:yes but it still says i need admin permission.i cant download any fixes because it says my c drive is not accessible.ive even tried many take ownership attempts but again it will not let me use admin rights,it wont even let me do a system restore and i was not given a windows disk with my laptop purchase.i am at my wits end with this problem.
View 1 Replies View Relatedi cant access drive c.
i cant run chkdsk
i cant reinstall
i cant copy and paste any files
i cant format
i cant do anything..
I cant access drive Q-- and I have a mirage of youcam by cyberlink??? Does anyone know what this means ? I have had so much trouble with someone hacking my pc -- I just bought this one and here wego agai!
View 4 Replies View RelatedI cant access drive Q --- and I have a mirage of youcam by cyberlink? I have had so much trouble with someone hacking my pc -- I just bought this one and here wego agai!
View 4 Replies View RelatedWhy is it that I can do anything to my Xp laptop shares from Windows 7 but Xp asks for a username and password to access Win?
Am I supposed to know what this username and password is? Did I create a username and password while not paying attention?
I've turned off password protected sharing in advanced sharing settings, turned on file and print sharing, both computers are joined to WORKGROUP. I went through the file sharing setup wizard on Windows 7 which spat out a password at the end but like so what? There's no username to go with it and it doesn't work if you enter that password from Xp anyway.
Can someone please put me on the right track here?
I hope that MS realise that there's an ocean of idiots like me that just want to copy a file from PC A to PC B at home and that the wizard should set all this up for us and not make us google around for half an hour just to find out how to copy a file from box to box. Unless it's intentionally not backward compatible?
I am the only user on my laptop and am the admin. If i try to delete some files, programs, or icons i get an "access is denied ; C: is not accessible"
View 1 Replies View RelatedI was wondering if it was possible to access a different hard drive on a computer via the network option on windows? All the computers on my home network are windows 7 and i'm always accessing stuff from a desktop file on my main computer to my laptop or onto my flat mates laptop/computer. I'm upgrading to a solid state pretty soon and hoping to put windows on my SSD and have all my files i'm usually sharing on my 2nd hard drive due to not having much space on my SSD. Is there any way to access a hard drive on your network that doesnt have windows 7 on? So I can access my files on my second HDD on my PC from my laptop. Normally all I can see is "Jon-PC" and that accesses the C: windows drive
View 1 Replies View RelatedI managed to remove all user access to the windows drive by mistake.
Now i cant access my main windows drive. Windows runs fine but i can't run some software, save any files to desktop and stuff. Please help as i don't want to reinstall ! i dont' see any security tab inside properties.
I have two Windows 7-64 computers on ethernet. The other computer has four physical hard drives, one partition each, C, D, E & F, all shared, and with "Everyone" given full access on the Security settings.i can write files from my computer to that computer's drives C, E & F with no problem, but whenever I try to write a file to that computer's D drive, I get a popup window titled "Destination Folder Access Denied", with an error stating, "You need permission to perform this action". (I get analogous messages if I try to delete a folder, etc.)I can read from that drive fine, and I can transfer files to it using UltraVNC.I've gone through all the sharing and security properties of that drive, and I believe they're all identical to the other drives that cause no problems when I write to them.
View 1 Replies View RelatedSeagate - BlackArmor 1TB External USB 2.0 Network Storage Server - ST310005MNA
So i plan on getting that Network Drive. Is there a way i can access it from anywhere over the internet without the pogo service or any other service, or if anything, a free service?
Running Windows 7 Home Premuim ....running on a laptop wirelessly.
I have 2 network drives one I can access with no problem the other it keeps asking for my password but says it is incorrect. I have a a wired Win XP system that can access both network drives with no problem.
Seems it is something with the accounts and persmissions on the Win 7 system. I have played with all combinations. At a loss.
I have a personal drive but its on a shared network drive (school) that i have access to but i cannot open any of my folders inside the drive and when i am able to open the folders i cannot open any of the content inside them its keeps poping up access denied how can i fix this or bypass so i can get to my work?
View 1 Replies View Related