basically I've just moved house and the internet isn't working. We have a modem that's connected to a pc with an Ethernet n there is a laptop co-nected wireless. Connections between comp n modems are good but modem to internet isnt. When loading ie or Chrome a message comes up 105 unable to resolve the servers dns.
View 2 Replies
my newly built pc only connects to the internet when directly connected to the modem. when connected to the Linksys WRT54G, the internet does not work and there are no status lights on the ethernet port on my computer. however all other computers and devices, wired and wireless, all work with the router. my new computer is the only one that doesnt work with the router.
1. reset the router and the modem
2. updated all drivers
3. checked to make sure the cable is good and the port on the router is good (they're both good, i use this ethernet cord and router port for my xbox and it works fine.)
4. DNS and DHCP are enabled
5. i've worked on this crap for 3 days now so ive done a lot more trouble shooting than this, i just cant remember everything.
I use Windows 7 RC at work. I connect to the internet over company LAN with static IP and manually inserted DNS. My internet connection is OK, everything works, but there is a yellow triangle in the connection icon in tray. If I put the cursor over it, I can read: "Network No internet access"
View 9 Replies View RelatedCan't delete Norton's, when trying to uninstall I get a blank Norton's window.Thinking it could be related to Norton's.
View 3 Replies View RelatedI am on my work place computer but my home computer is getting an error 651 WAN message and I can't connect to the internet. Have unplugged everything a few times, modem and all and still get the same message. I believe at the time I started getting this message, I was opening up a Walgreens email and was going to delete it and that's when my issues started.
View 1 Replies View Relatedi have a brand new toshiba laptop connected wirelessly. however it keeps showing connected however no internet access.i have a notebook as well that is brand new and it connects no problems what so ever.im using windows 7 home premium and 64 bit os.
View 1 Replies View RelatedWhen starting Internet Explorer, I keep getting and error message telling me that Windows Installer cannot be accessed. Now I cannot open Outlook, Word, iTunes etc. When I do try to open these programs, I get a message saying "Please wait while Windows configures Microsoft Office Small Business 2007", but it doesnt seem to do anything. I've run a diagnostic (F12) and was alerted of the following error :Error Code 0142, Msg Error Code 2000-0142, Status 79. The system is extremely slow and I can only stay logged onto an IE page for a few minutes before it has to shut down. My system just restarted (not sure why) and after the start up I got this error message "An error occurred in the program. Try to open it again. If this problem continues, you'll need to reinstall Microsoft Security Client. Error Code: 0x80040154". I am using Windows 7 Home Premium on a Dell Studio.
View 4 Replies View Relatedive been having a problem with internet explorer crashing since i bought my laptopim using ie9 and i keep getting the msg saying internet explorer has encountered a problem and needs to close (i appoligize if its not the exact words). than it closes all my programs down. i dont know if it has to do with another problem i have been having while playing facebook games and watching movies using flash player. right out of the blue my game or movie (whichever im doing) freezes than either says i need to update flashplayer or it just shows a big "!" were my game or movie should be.
View 14 Replies View RelatedI just purchased a brand new Windows 7 Home Premium 64 bit Desktop Computer. I replaced it with my old Windows XP IE8 and used Hotmail as my email client which I still want to use on my new Windows 7 Computer. However; when I click on the read mail icon in IE8, on my new Windows 7 PC, I get a popup error message saying "Cannot perform operation because the Default Mail Client is not properly installed."
Am using dell inspiron laptop with windows 7 home premium 64 bit , i have a free wifi in our collage when i give connect it was getting connected but there is no internet access i had tried with trouble shoot it was giving problem regarding DNS
View 2 Replies View RelatedA few days ago i was trying to connect my laptop to my ps3.To do this i was changing setting etc but never got it to work anyway.The next day i turn the computer on and can't connect to the internet.I think it was something to do with dns.I uninstalled and reinstalled my usb modem and software and always get full connection bars and says its connected, but in the bottom right hand corner it says network "no internet access" with a yellow triangle over it.It was because i was changing all of the settings in network and sharing senter, but being the wally i am, never wrote down the original settings. Whatever i did i am fairly certain i did it in the change adapter settings.
View 5 Replies View RelatedI have a question about sharing my Internet. Ok my internet provider sends me some analogue signals, my modems gets them, converts them to digital signals and then, sends this Connection to where it should go (I mean I can use this connection using e.g. wifi). I have a vpn connection. I wanna use it on my mobile. My mobile doesn't support vpn configuration. So somehow I should send the vpn connection from my pc and modem. How can I share the internet I am using in my pc using my WiFi modem?
View 2 Replies View RelatedThe problem with Windows 7 and an USB 3G modem is that everytime I use it it creates a new connection, and next time I plug the modem in it will be like "Internett Modem Connection 11" and in the connection list I got many of them, how can I prevent this issue? And can I delete some of them by any chance?
View 3 Replies View RelatedIn order to change my password a service provider had to reset my modem.I can go on the internet with my desktop, but I am having difficulties going on the internet with my laptop. It seems that my wireless router has to be reset also but he can't do it because it's not one of theirs. He did explain to me though that I have to put the I.P. address into the browser in order to get on the router's brand name and so on, which I did but I don't know what to do next. My router's I.P. address is 192.168.0.1 It is a NEXXT Nebula 150?
View 3 Replies View Relatedhow to connect 2 compute .1 is laptop and the other is desktop using bsnl broad band modem type 1 which have 4 port plus 1 usb port . so that both the computer has networking and internet connection.
View 2 Replies View RelatedMy high speed modem locks-up frequently and I have to reboot the modem and computer. The modem was checked out and it's okay. Is there something in windows7 or my computer harware that could be doing this?
View 4 Replies View RelatedI've just bought a new router-modem (lynksys x2000) to replace my old modem.After going through the setup(by using quick install guide CD-ROM provide with router-modem), i've got no internet connection. My laptop can connect to the router-modem but not the internet.Do my new modem have its own firewall?(I know my laptop firewall is running). Do i need to disable the firewall? If yes, which one should i disable, my laptop of modem.
View 9 Replies View RelatedI have an Acer Aspire 5740G and for some reason it hasn't allowed me to install my new wireless internet usb stick. I have an older usb stick already installed that I use, but it won't let me install this new one which works fine on my PC.
When I plug in the usb stick it makes that beep beep noise to indicate it detects the device but when I go into my computer the device pops up and then suddenly disappears.
I have my new HP eprint printer installed on my PC however when I plug the usb cable into my laptop after installing the CD it won't connect. This is during the setup when it says "connect usb cable" or whatever - but NOTHING HAPPENS!
I am using Internet Modem USB Stick with my computer. My computer is Windows 7 Professional. I have a problem with removing the Internet Modem USB Stick from the computer. When I insert the Internet Modem USB Stick into my computer and then I wish to remove it, I really can't do so. I, however, can remove the Internet Modem USB Stick from the computer easily in Windows XP.I think it will reduce my Internet Modem USB Stick Lifetime and there probably should effect my computer lifetime if I try to remove the USB Stick without allowing to reject.
View 9 Replies View Relatedjust built a computer installed Win 7 Home Prem 64 on it.Booted, loaded drivers, updated drivers w/usb key and laptop.Slow (4 to 5 kb/s dl) internet speed. Did some messing around, had it at normal speeds after messing around (windows updates installed).Hooked up to my Siemens 567, will not connect to internet.Hooked up to my DIR-655 router, will connect at slow speed.Home is brand new, CAT6 Wired, previous Vista machine worked flawless on this Cat6 jack. Wifi works on laptop just fine. (also vista).Bought a network card, same situation so that rules out my computer hardware and leaves the OS and Router/Modem.I am pretty darn good at computers but this is making me lose sleep and is turning me into a bad fiance.
View 3 Replies View Relatedwhenever i try to view video on Internet or any flash my windows 7 machine disconnects the huawei modem (even with updated drivers and firmware) and thus also the internet access. non-video internet works fine. the very same modem don't disconnect during video-viewing when installed on another machine! what to do?
View 3 Replies View Relatedinternet connecting thru modem but unable to access web page dns - error, I have a Internet connection by the Lan provider, If I connect thru his connection it works but If I connect thru Data Card - In network section I find that there is no "internet connection". But the modem showing the connection. If I try to open any webpage it gives DNS error or web page not reachabl
View 2 Replies View RelatedMy desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
I have had this computer for about three years and I am getting my internet service through Verizon. Three days ago I got a message that my brouser address could not be found because I am working offline. I went to tools click working offline, the red X appeard and try to get back on the internet. I have not been able to get connect since. I have contacted Verizon tech and went through all the steps with them, still no connecton. They told me it was a microsoft problem. I contected microsoft troubleshooting online service. I went through all the steps with them.I even paid $200.00 for IYOGI tech support. They say I might need a new modem.
View 4 Replies View Relatedcan't connect to internet it says connection between access point router or cable modem and internet is broken
View 4 Replies View RelatedI am running a modem and wireless router which is working fine. I have my home computer up and running (Windows 7)- no problems at all. However, my work laptop (windows 7 professional) will connect to my wireless network but will not 'access' the internet. I have set up a connection from scratch; changed the network settings; restarted (everything) plugged in wth Ethernet cord; run a router check... and honestly I am way out of my league in figuring this one out.I tried several of the solutions for forum threads around the problem of 'connected to internet but no internet access', but part of my confusion is that one computer works fine, but the other simply won't allow access. When I use a when I use an open network it won't allow me on at all. But when I set up my private network it will connect and show internet access for 10 SECONDS at a time and then No access... like a constant flicker...
View 2 Replies View RelatedI've had a problem for the past few months trying to get my Internet to work. The wireless works fine with my phone, other computers, installed Ubuntu on my comp, etc. The only place it seems to not be working is in my windows. I'be checked out a few videos and can't seem to find the exact solution. I'm thinking it may be a virus, but the avast antivirus "quick check" didn't find anything of that sort. In the device manager under Network Adapters, there are two links that each have a yellow 'i' symbol. When I troubleshoot with windows it says there are no issues. When I go to 'Change adapter settings' there are no adapters available such as the LAN, etc.
View 9 Replies View Relatedi have a problem with my internet. Not sure if its my laptop or my internet. But when i turn on my laptop the internet works for a couple min. or hours or so then after that there will be a yellow triangle with a exclamation mark in the middle. Not sure why that happens. But if you guys have ideas that i can try out then that would be great! I tried /release & /renew but that didn't do anything. Also disabled and enabled the network adapter but that didn't work either. I am using a Ralink RT5390 802.11b/g/n WiFi adapter.(If that helps with anything) I am using a windows 7 hp laptop. If you guys have anyway to fix this then please tell me! Its been like that after 5 weeks i got my laptop.
View 9 Replies View RelatedI inserted a blank CD to add music into, using iTunes 10 (maybe 11).It did the job but all of the music were incomplete and the lengths were like 8 or 6 seconds.I tried to format the CD but it didn't work.Then I got angry and smashed the keyboard, and it froze.I force shut the laptop WITH THE CD STILL INSERTED and ejected it, then turned it on again.Windows started Startup Repair and it finishes, then restarted.And again Startup Repair ran again, then it told me it can fix the problem in a new dialog box.My computer is not connected to the Internet and I'm using a substitute computer to type this.A box in the dialog box showed the following text: [code] I closed the dialog box and it told me: (translated from Japanese, may not be that accurate.)
If you connected devices such as cameras or portable music players to this computer, please ejected them and then restart the computer. If this message keeps appearing, please ask the administrator or the manufacturer of the computer.Then I click Finish to restart.And again Startup Repair showed up, and the same message showed up.I clicked something like Show Restore System Option to restore the system, but it says the restore point is broken during restoration, and when I try to restore the system again, it still doesn't work.
I just installed windows 7 home premium 64 bit, but for some reason, icant browse the Internet even though I'm connected. Ie thinks I'm not connected and nothing happens on firefox. I've tried the troubleshooter, disconnected and reconnected to the wireless network, and restarted my computer. Nothing changes.
I don't know if this is relevant but I got Microsoft tech support to help me download the file since I was having difficulties, and he somehow managed to disable all 3rd party programs. I'm not sure if that's related to this situation, and I don't know how to enable the programs again...
Is it possible to have a computer connected to a LAN (via a router/switch) but not connected to the Internet, being that the Internet signal comes via that router/switch?
View 4 Replies View Related
