i am using a USB modem for networking, but i want to connect my cell to the internet using this modem via WiFi. How can i setup up a WiFi connection in my house using this USB modem?
View 4 RepliesI'm trying to achieve something which I think most might not have tried,starting with what I have
1.Type 2 adsl2+ cpe/iad modem-It has built in wifi.
2.A fiber internet connection.
3.A samsung smart tv with built in lan adapter (40 inch LED-no wifi but wifi ready)
Now the modem which I have mentioned above cannot be used with the fiber internet connection.So,it is just lying waste but I want to use my internet connection provided by my ISP through fiber connection with the modem so that I can use my modem's wifi and lan ports.What I have done was connected my laptop to my modem's wifi and also to my ISP's fiber connection so my laptop is connected to both the networks and now I have tried to establish a bridge connection between the lan connection and the wifi connection I was successful and I was also able to share my internet connection(as shown in my laptop) but when I have checked for the wifi internet connection it is not there(Checked on my mobile-one x and ipad).So is there any way so that I can do this...??Please don't suggest me to use a application like connectify or virtual router to share my fiber internet connection.Now there is a another thing that i have mentioned above my Samsung tv now I have connected one of my modem's lan connection to my tv and tried to use the all share application(my laptop is connected to the same modem through wifi) in my laptop I have found my tv and the laptop connected to the modem(Control PanelNetwork and InternetNetwork Map)but my tv is not at all recognizing my laptop and my laptop is also not finding my tv(in the allshare application).If my first problem of getting my internet to the modem's wifi is possible then I also want to try that for the modem's lan connection so that I can avoid the pain of buying a samsung wifi dongle which costs more than 10% of my tv's price.
I have a question about sharing my Internet. Ok my internet provider sends me some analogue signals, my modems gets them, converts them to digital signals and then, sends this Connection to where it should go (I mean I can use this connection using e.g. wifi). I have a vpn connection. I wanna use it on my mobile. My mobile doesn't support vpn configuration. So somehow I should send the vpn connection from my pc and modem. How can I share the internet I am using in my pc using my WiFi modem?
View 2 Replies View RelatedI have a desktop computer connected to a wireless modem through an ethernet cable. My laptop is connected to the modem using wifi. Is there any way to connect the two computersThis my network map:
View 4 Replies View Relatedusb wifi modem sharing my laptop using usb printer sharing
View 1 Replies View Relatedi am pradhap, i am using a mobile that contains wifi. it performs wifi wireless n/w and a modem. so how to access wifi connection form my mobile to windows7
View 1 Replies View Relatedhow do i create a shortcut to dial up modem in win7?
View 1 Replies View RelatedI am trying to enable a new Incoming Connection but get a message saying "Incoming connections depend on the Routing and Remote Access service, which was unable to start".I have a standard 56K modem installed, using a telephone line.The computer is a stand alone system, running a local application where Internet access is not required.I do however need to access the PC from time to time and dialup is the only option.Is there a work around as it appears that Windows 7 needs to identify a Netork befor starting the Routing and Remote Access service?
View 1 Replies View RelatedThe problem with Windows 7 and an USB 3G modem is that everytime I use it it creates a new connection, and next time I plug the modem in it will be like "Internett Modem Connection 11" and in the connection list I got many of them, how can I prevent this issue? And can I delete some of them by any chance?
View 3 Replies View RelatedBackground; home built computer 8gb ram all tested individually, 1.0tb hdd tested, popped in new 1.5tb hdd, tested power supply, 5 fans (no overheating issues), popped in new network card, tested disk drives.Computer runs Comodo firewall, Avast antivirus, and tune up utilities. I was online one day and 20 windows opened up at the same time computer rebooted bsod. that day computer rebooted about 10 times. at first i was able to go online but soon afterwards no internet connection (red X on icon).I tried to scan and the computer would reboot in the middle of scan (All different types of scans safe mode safe mode w networking normal). I was on the ph w a tech from avast for three hrs we ended the conversation by him telling me to internet provider, did that spoke w that tech for two hrs. I uninstalled avast. Every time the computer starts comodo message comodo does not seem to be started or installed. fix doesn't work. I kn it is my computer that will not allow a connection to internet. I cant release /renew rpc server unavail So I took out hdd and put in a new one to do a clean install no luck win 7 enterprise error 0x80070570, 0xc0000005, then it said 0x7717b099 ref memory at 0x774ae76f memory could not be written. I decided to put old hdd in and combat the problem. Message Diagnostics Policy Service not running.
View 5 Replies View RelatedJust bought this belkin router. Linked one computer through LAN and 4 devices through WIFI or some reason my WIFI devices are not able to read or detect connections to the LAN network
View 1 Replies View RelatedI've just bought a new router-modem (lynksys x2000) to replace my old modem.After going through the setup(by using quick install guide CD-ROM provide with router-modem), i've got no internet connection. My laptop can connect to the router-modem but not the internet.Do my new modem have its own firewall?(I know my laptop firewall is running). Do i need to disable the firewall? If yes, which one should i disable, my laptop of modem.
View 9 Replies View RelatedI have a notebook that is connected to ADSL modem via Ethernet cable.I don't know how it happened but at a certain moment after I rebooted it, my network connections started looking like this:I have an extra unidentified network and at the start up my notebook tries to connect to it and fails.So I have to manually disable and enable Local Area Connection for it to start working and things look like they should:This happens every time I start up Windows.
View 4 Replies View RelatedI have successfully connected my two Windows7 machines via local network (Ethernet) - it worked automatically, no setup was needed. Everything is fine, for example I'm able to use a share mouse utility via the local network and control both computers with the same mouse. However once the network is swtiched on, my stick modem mobile 3G internet connection is shut down (the browser reports DNS name not resolved error). If I turn off the router the internet connection immediately returns. I tried to disable the firewall but to no avail.
View 1 Replies View Relatedcan't connect to internet it says connection between access point router or cable modem and internet is broken
View 4 Replies View RelatedFor some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
I have a Wifi router and a Windows 7 desktop with USB Wifi and Virtual Wifi adapter running. how to create a meshed Wifi network with one single ssid/key?
View 1 Replies View Relatedwith a not connecting to the internet situation over wifi. and i told her to use (netsh int reset c:\reset.txt) in the command prompt to reset her IP configuration.well its been about 2hrs since and now her computer is not getting past the Windows Starting screen. Did somthing go wrong with the re configuration?
View 1 Replies View RelatedI have wifi connection of one service provider and Lan Connection of another service provider... Can i use both connection simultaneously on my laptop? having window 7. They both have automatic configuration of IPs
View 1 Replies View RelatedI am trying to set up a workgroup between two Windows 7 Pro computers over a wifi connection. I have set the workgroup name to be identical on both machines (Lastname-Home), but neither machine can see the other. Network discovery and sharing are turned on. From my googleing and forum searching (here and on other forums) all I can find is people saying that if the workgroup names match you should be able to see the PCs.
View 1 Replies View RelatedI've tried to set up a Wi-Fi connection to use for Nintendo DS/3DS, but nothing seems to work. I don't have a wireless internet connection, so I bought the Nintendo Wi-Fi USB Connector, but that does not work with Windows 7... I've also tried another Wi-Fi USB device, but that doesn't seem to work either. I guess I should get a wireless router that allows Wi-Fi connection, but which would actually work for Nintendo DS/3DS?
View 1 Replies View Relatedi'm getting annoyed with my sister because she uses too much bandwidth on her laptop than i can get, he uses facebook, twitter, Internet, and utorrent at the same time and i'm only using Internet, visiting forums and playing games. how do i slow down the wifi speed so i can make her internet usage more pain in the ass?
View 5 Replies View Relatedi have a wifi connection without any protection. now these days i cannot work on it. it tells me that,there is not any access on internet. earlier i could work on it. but the line is always without any protection.
View 7 Replies View RelatedI cannot connect my laptop to the wifi connection. Its showing like check whether the wifi connection is in range...
View 2 Replies View RelatedI just upgraded to the beta version of Windows 7 form Vista. I am now (unable) to print off of our local network via wi-fi. I am fairly computer literate, I have tried everything. The internet works fine with my Belkin N+ router...but I cannot print via wi-fi thru my hard lined computer, the one with (Windows 7). Can anyone please help? All 3 of my wi-fi computers have Windows XP on them.
View 2 Replies View RelatedI connect to my home wifi and it says connected, but there is no internet connection.I noticed that network adapter shows "wireless network connection 2" with that "2" at the end of name. I guess there is a problem. If I rename it to just "wireless network connection" it says it already exists. But cannot see it, and use it! Can anyone tell me how to reset it or somehow switch to "wireless network connection" without "2"?
Also when I type ipconfig/all I get this:
------------------
C:Usersuser>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : user-PC
[code]....
On my new Lenovo V570, I've been having an issue where it takes anywhere from 30 seconds to 3 minutes to connect to my local network.It will show all the available networks in the list, and either if I wait, or if I try to click my automatic network and click "connect", it still takes a large chunk of time.This happens on all of my saved connections, as well as any public connections I try to access.I believe my wireless is run through Intel My Wi-fi, though for some reason the icon is no longer in my icon tray.
View 2 Replies View RelatedOn these occasions, while watching Hulu on my HTPC, which only connects via WiFi on my Router (Cisco E3000), the movies were interrupted by a loss of connection, indicated by the white tray icon turning orange, and when expanding it's menu, the connection bearing the name of my network had disappeared.On the first failure, the flashing light on the network adapter (Belkin F5D8055) continued flashing as usual, but the steady light was out, until pressing the connection button. The second time around, both light remained lit as normal, but in both instances my network connection on the network adapter's tray icon had disappeared. Using the WiFi's network adapter's connection button, and the router's PBC button didn't solve the problem, nor anything else that I tried.Since the WiFI connection is primarily for internet access, rather than connecting computers, and that shutting off my desktop doesn't usually effect the HTPC's internet connection, it seems obvious that the connection is managed by just the router, adapter and HTPC, so I fail to understand the relationship between the vanishing network and the loss of internet connection.When these failures occurred, they only lasted for ~ 10-15 minutes, and then were restored on their own, with no more apparent reason than the outage had. So far, this is only an annoyance, but I fear that it is an omen of greater problems on the horizon, and I have no idea of how to isolate the origin of the problem..
View 9 Replies View RelatedI connect with a broadband dongle. Sometimes it's disconnecting me after a couple of minutes - other times I'm OK for a couple of hours. No problem getting back on-line - only takes a minute, but it's damned annoying.I contacted the ISP (Indian call centre) and they were of no help. Said they could see the frequent disconnections but that there was no breaks in their service.
View 2 Replies View RelatedI just got a new laptop with Windows 7. Initial set-up went fine but I cannot connect to router. I have a MAC using the wi-fi and I can also connect an iPhone, a Linux, and another Acer laptop using Windows 7...but the new laptop is not working. My connection is showing on the menu but once I enter the security key, I get a message saying it cannot connect.I restarted the router, went over the whole router set-up again, connected the Ethernet cable to the laptop while trying to set-up the wi-fi, but after numerous trials, nothing worked.
View 2 Replies View RelatedI am using HCL ME 74 series laptop with win 7 OS 32 bit. recently my OS crashed and I reinstalled the OS. surprisingly there are no netwrok controllers in my device anager. the network adpters give by HCL have been used. But the system is detecting the wifi networks all around but not connecting. The HCL ME series gives some funny buttons to press: set wifi enable -> Fn+F11, and bluetooth -> fn+F12 . both are enables.
View 4 Replies View Related