Setting Up Windows 7 Remote Desktop To Connect Via Internet
Jun 19, 2012
I have setup Remote Desktop on two different Windows 7 computers and I am unable to connect to them. I have followed several examples, which are the same on setting this up, but still unable to connect. The examples show trying to connect using the computer name and user name. If you are connecting say from your office computer to your home computer, do you not have to enter the IP address somewhere or does it just connect via the computer name?
I have yet to find anywhere to enter an IP address or connect any way beside just using the computer name. I am setting this up to connect Windows 7 to Windows 7.
View 9 Replies
ADVERTISEMENT
Feb 10, 2012
I want to do some things on my sisters' laptop which is in other country. Here is the situation:
My computer has Windows 7 Ultimate (64 bit) installed and I am using ADSL internet connection.
My sister lives far away in UK and her lap-top is connected to internet using the wireless. Window 7 ultimate is installed at her computer too.
Since I am complete beginner, please provide me step by step tutorial. I have tried a lot of tutorials that i have found on the web, but with no success.
View 2 Replies
View Related
Oct 3, 2011
I am trying to configure Remote Desktop Access to work over the internet. Remote Desktop Access works on my local network.
Both of my computers are on Windows 7 Professionnal. My router is a Belkin F9K1002.
I followed the official widows tutorial. I forwarded the necessary port on my router (I switched from port 3389 to 50000, in case 3389 was blocked by my isp).
Every time I try to connect I get
"Remote Desktop can't connect to the remote computer for one of these reasons:
1)Remote access to the server is not enabled
2)The remote computer is turned off
3)The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
View 2 Replies
View Related
Aug 30, 2011
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
View 1 Replies
View Related
Jun 6, 2011
I'm using Win7 Professional at home and winxp at my office. I can connect fine from home to office but can't connect from my office to home. I have gone through all of the google searchs and all of the posts on this forum without any luck. I have checked that my modem has port 3389 forwarded. I have confirmed that it's listening on that port. I have checked all the firewall settings, and even turned off the firewall and still can't connect.
View 6 Replies
View Related
Nov 14, 2011
is it true the only Professional and Ultimate versions of Windows 7 can accept Remote Desktop Connection requests? I read on a post from 2009 that "any version of Windows 7 can act as a Remote Desktop client, but only Ultimate and Profession can host a Remote Desktop."I'm not sure I completely understand that - I do understand what host and client mean. However,d despite lots of different setting changes, I can't connect to this Windows machine using Remote Desktop.
View 1 Replies
View Related
Sep 26, 2012
how to Remote Desktop Connection connect to a Windows 7 standard account?All attempts to Remote Desktop Connection connect to a Win 7 standard account fail with:Attempts to the same account change to administrator succeed. But I cannot afford the risk of this account being administrator.The machine running RCD is Win XP, on the same switch.
View 3 Replies
View Related
Oct 27, 2011
I can connect my local laptop to a remote desktop using Cisco Any Connect VPN on windows 7. I can use the internet, send emails, work with files on the remote computer.However if I switch back to the local laptop computer and use the internet, send emails, or open files the remote connection closesI get the folowing errorRemote Desktop Connection has stopped workingA problem caused the program to stop working correctly.
View 7 Replies
View Related
Jul 8, 2012
I am trying to connect to another Windows 7 machine on the same router, but it will not connect. I have remote desktop enabled and checked under the computer settings, but when I right click the computer in the network & sharing center and try to connect, it won't work. I also tried manually entering the computer's network address but it failed. Both machines are Windows 7.
View 3 Replies
View Related
Oct 16, 2011
Remote Desktop Allowed
Regedit set to 3389
Norton 360 mstsc.exe allowed in traffic rules
ping to workstation replied
just can't get remote desktop to connect? any other things I should check?
View 9 Replies
View Related
Oct 17, 2009
Just recently immigrate to win 7, I used to connect my XP work computer via remote desktop from home, now I cant . The ping command works fine. How can I solve this problem?
View 9 Replies
View Related
Jun 2, 2011
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.
i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 9 Replies
View Related
Sep 11, 2009
Microsoft is gearing up to release a tool that will permit users of Windows Vista and Windows XP computers to connect to Windows 7 machines, and to take advantage of features that only the latest version of the Windows client brings to the table. Bridging Vista and XP with Windows 7 will be possible through the Remote Desktop Connection (RDC) 7.0 client.
The Redmond-based company has been cooking the client for some time now, and it appears that the baking time is almost over. There’s still no definitive delivery deadline, but with Windows 7 general availability now almost a month away, Remote Desktop Connection 7.0 GA is bound to follow.
View 1 Replies
View Related
Nov 12, 2012
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 1 Replies
View Related
Jan 9, 2013
We have 2 printers (one color, one b/w) in our office and 4 local computers.
The printers are connected by USB to one of the computers (a PC running XP) and they are shared on the local network. All of the 4 local computers can print to either printer with no problem.
The problem is that when I use remote desktop connection from one of the PCs (the only one that has Windows 7) I can only print to 1 of the 2 printers (the color).
When I use remote desktop connection from any of the other 3 computers then I have no problem printing to either printer.
I've tried speaking to the IT guys who run our offsite server and they have been no help (despite being expensive) so I'm trying to troubleshoot as much stuff on my end as possible to avoid spending a crazy amount on them. what I can check, or what other information I can provide to make diagnosing this problem easier?
View 2 Replies
View Related
May 4, 2011
Is there a way to unattended remote connect to a desktop, using existing MS tools, and share the desktop, without having to wait on the other user to give me a thumbs up?I work on a remote PC, and need the user there to be able to view the desktop while I work on it. However I also need them to also not have to directly give me access each time, such as the case with the help me request application (Windows Remote Assistance normal setup)
View 3 Replies
View Related
Mar 30, 2012
I'm encountering a very frustrating problem connecting to my office PC (which is Windows 7 Professional). No matter what client I use (Windows 7 built in remote desktop from a W7HP machine, Remote Desktop Client on Android, etc.) when I log on to the host machine it re-logs me on. Basically it seems to kill the previous log on session, logs it off, and then logs me in anew. This is really annoying. It closes all open apps and makes me reopen them. It takes much longer than a usual connection. I can't seem to find any reason for why this might happen, the only difference between this and the thousands of connections I've made over the years using RDP is that this is being done over our work VPN (A SonicWall VPN client). I don't see why that would make any difference but it's the only variable.
View 1 Replies
View Related
Jun 25, 2011
I normally use remote desktop connection over my home network by simply typing the IP address assigned by the router to the computer I am trying to connect to.Now I am in a hotel in another city. I tried using the ip provided through ipconfig and whatsmyip.com, but I am unable to connect through remote desktop connection.
View 6 Replies
View Related
May 12, 2011
I am connected to the Internet through a router and I just learned how to properly configure Remote Desktop and port forwarding so that I can access my computer from outside over IP. However, and since I have a small home network, this causes me some doubts in what concerns both the security of the information being transmited over the Internet and the internal security of my LAN. Is it really safe to use Remote Desktop through IP? What encryption protocols/algorithms are used? And how much are other computers in my LAN protected?
View 1 Replies
View Related
Jan 24, 2012
I have a Win 7 Home Premium box along with 4 WinXP boxes in a simple network. My Win 7 box can Remote Desktop to any of the WinXP boxes, and be used to "drive" them, no problem.I added a new machine yesterday that came with Win 7 Home PremiumAfter searching through other threads, I found it was stated that if I upgrade the new box to Win 7 Pro or Ultimate, I can then use my original Win 7 Home Prm to connect to, and "drive" the new Win 7 Ult. box.I successfully upgraded the new box, it's now confirmed to be running Win 7 Ultimate. I have also disabled the firewall, and checked the Remote Box Settings:Allow connections from computers running any version of Remote Desktop (less secure).However, the Home box cannot connect to the Ultimate box. It times out with the following error:Remote Desktop can't connect to the remote computer for one of these reasons:1) Remote access to the server is not enabled2) The remote computer is turned off3) The remote computer is not available on the network.
View 1 Replies
View Related
Aug 31, 2011
I purchased a laptop last week with Windows 7 home premium. Currently have desktop wire to router with Windows 7 home premium as well. Everything hunky dorry in regards to internet connection. 2 days later, I've lost internet connection to both computers. Both say I'm connected to my network. I have other mobile devices that can connect to the router, so I don't think that's the issue. I read about disabling Home Group, which I did and that didn't help. I've got to think that there is a setting I just need to tweek, but have yet to come across something that works. The laptop does connect at my work to the WiFi so the network card is working properly. Both computers will connect to the internet if I bypass the router and connect ethernet cable directly from modem to computer.
View 7 Replies
View Related
Aug 18, 2012
I have tried connecting to my router with both wireless and lan cable but they both fail. What is strange is that my vista laptop (currently using) has no problems connecting either wirelessly or using the same lan cable as my desktop failed with. My windows 7 desktop was working fine earlier today but after I went out it installed the updates and since then no amount of rebooting or restarting of the router has fixed the problem.
View 2 Replies
View Related
Nov 7, 2012
I am using Windows 7 Pro 64bit, trying to use Windows remote desktop to connect to another PC in the LAN and install software. Right click on the .exe and choose run as admin. As soon as I do that I get a black screen with 2 white bars in the upper left hand corner(looks like a pause button). The user who's pc I am connected to sees the log inbox for the admin creds, how ever I can not get to it. How can I make that screen stop popping up?
View 1 Replies
View Related
Dec 20, 2011
I'm using a desktop. I'm trying to connect via a Trendnet Wireless USB adapter. I have Windows 7 64 bit.
The internet works perfectly fine on my iPhone, iPad, Laptop, and the other wired desktops and wireless laptops in the house. The USB adapter worked before when I had a different ISP and a different router.So here's the point where I'm at. The adapter seems to be receiving a signal. It looks like packets are being both sent and received. However, my connecting process always seems to get stuck and it returns an 'Unidentified Network'.
And here's one more piece of information. At one point earlier today I actually did manage to connect internet, but only for a little bit (I accidentally hit disable and haven't been able to get back to it). I noticed that when it was connected, instead of an unidentified network, it showed A00-###### (I can't remember what or how many numbers there were).
View 1 Replies
View Related
Jun 16, 2011
Im sharing a wi-fi connection with my neighboor, and I had no problems getting online from my laptop. I just bought a new desktop however, and I cant connect it to the wi-fi connection - do I need to buy some kind of adapter or something.
View 6 Replies
View Related
Jun 24, 2012
today my desktop couldn't connect to the internet even i tried to restart my router and cable modem for about 5 times. I'm sure i have internet because my sister's laptop still able connect to the internet. When i check my connection, it said " Local Area Connection doesn't have a valid IP configuration. My desktop is using window 7 and i think it just did some update before i shut it down last night.
View 5 Replies
View Related
Nov 8, 2011
I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Windows 7 machines, both running SP1.
My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.
I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.
View 2 Replies
View Related
Jan 16, 2012
I've been away from the PC world for the past few years because I've been running a Mac.I decided to get back into some gaming on picked up a Dell XPS desktop running windows 7 ultimate x64.I bought a Asus USB N10 Wifi Adapter and it won't connect to the internet. It gets a limited activity logo over top of the connection. Today I tried plugging it rite into the router with a LAN cable and still, no dice. Came up with an IP address error.I'm guessing this is a router issue? When i run ipconfig in cmd prompt, it doesn't even have a default gateway?
View 7 Replies
View Related
May 9, 2010
I can't connect to the remote VPN. I did it successfully 1 week ago, when using XP. Verifying username and password stays too long and after that this error occurs. I've tried many things, but none of them worked. It is 100% sure that I enter the correct username, password and domain name.
Here is my dxdiag:
[Code] .....
View 3 Replies
View Related
Jun 7, 2012
just last night after i was finished playing skyrim for the night, i saw on steam that i had no connection. so i looked towards the internet bars icon next to the clock and saw a yello triangle with a "!" in it. so i disconnected and reconnected but still the yellow "!". so i just decided i would try again tomorrow (today).when i woke up today it didn't have that error, so i decided to go to Internet on chrome, but it had that "webpage not available" (wouldn't work for ie either). i figured it would soon fix itself like it always had, so i tried playing mw3 on my xbox, but it wouldn't connect to live either o.o and when my mom wanted to watch netflix on the living room xbox, she couldn't connect either! then i figured out it was definatly my modem that was refusing to connect to anything.
View 9 Replies
View Related
Feb 9, 2011
How to set up a vpn so my wife can work from home, we need to connect to the work pc running xp from our laptop at home running windows 7 64 bit. I have no idea how to do it at all??
View 2 Replies
View Related
