Remote Connection: Can't Select Who Can Connect
Jun 27, 2011
I have 3 computers with Windows 7 Pro.
I can use remote control between 2 of them, but I can not connect from any of those two to the third one. All the services needed for remote control are running, and I have tried several tutorials on how to set up remote control...and nothing. Again, only on third computer remote control does not work. On that computer I have 2 accounts: one standard and one admin. I have put admin account under "Select users" and did not help. Tried with enabled Administrator account and nothing. Below you will see the picture which describes the problem. I can not select who can connect.
View 3 Replies
ADVERTISEMENT
Jun 2, 2011
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.
i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 9 Replies
View Related
Feb 10, 2012
I want to do some things on my sisters' laptop which is in other country. Here is the situation:
My computer has Windows 7 Ultimate (64 bit) installed and I am using ADSL internet connection.
My sister lives far away in UK and her lap-top is connected to internet using the wireless. Window 7 ultimate is installed at her computer too.
Since I am complete beginner, please provide me step by step tutorial. I have tried a lot of tutorials that i have found on the web, but with no success.
View 2 Replies
View Related
Jan 9, 2013
We have 2 printers (one color, one b/w) in our office and 4 local computers.
The printers are connected by USB to one of the computers (a PC running XP) and they are shared on the local network. All of the 4 local computers can print to either printer with no problem.
The problem is that when I use remote desktop connection from one of the PCs (the only one that has Windows 7) I can only print to 1 of the 2 printers (the color).
When I use remote desktop connection from any of the other 3 computers then I have no problem printing to either printer.
I've tried speaking to the IT guys who run our offsite server and they have been no help (despite being expensive) so I'm trying to troubleshoot as much stuff on my end as possible to avoid spending a crazy amount on them. what I can check, or what other information I can provide to make diagnosing this problem easier?
View 2 Replies
View Related
Sep 26, 2012
how to Remote Desktop Connection connect to a Windows 7 standard account?All attempts to Remote Desktop Connection connect to a Win 7 standard account fail with:Attempts to the same account change to administrator succeed. But I cannot afford the risk of this account being administrator.The machine running RCD is Win XP, on the same switch.
View 3 Replies
View Related
Oct 27, 2011
I can connect my local laptop to a remote desktop using Cisco Any Connect VPN on windows 7. I can use the internet, send emails, work with files on the remote computer.However if I switch back to the local laptop computer and use the internet, send emails, or open files the remote connection closesI get the folowing errorRemote Desktop Connection has stopped workingA problem caused the program to stop working correctly.
View 7 Replies
View Related
Aug 30, 2011
We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect.I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine. I have not made any changes on the server side since this problem seems to be local to this client only. On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection.
View 1 Replies
View Related
Nov 12, 2012
i would like to connect using RDC from my netbook (using windows 7 starter) to my desktop (using windows 7 professional) on the road.i have followed all the steps here: Allow Remote Desktop connections from outside your home network when i try to connect i get the dreaded "remote desktop can't connect to the remote computer" error message.
View 1 Replies
View Related
Jan 8, 2012
i have an x-fi titanium soundcard with logitech 5.1 speakers that use 3x 3.5mm jacks ive ordered a set of roccat kaves which also use 3x3.5mm jacks.what i would like to know is. is there some kind of cable or a switch box that i can plug all jacks in but select which device i want to use? so i dont have to keep swapping them at the back of my pc. or is the best thing to just use some 3.5mm jack extensions and mount them closer to me. then just swap the cables as and when?
View 4 Replies
View Related
Jan 5, 2012
I am running a lite version of windows 7 32bit in which the dev took off remote desktop. I have looked everywhere but cant find a guide to reinstalling it.
View 5 Replies
View Related
Jan 25, 2013
can i connect to my server which more that 100 mts far away
View 1 Replies
View Related
Jun 25, 2011
I normally use remote desktop connection over my home network by simply typing the IP address assigned by the router to the computer I am trying to connect to.Now I am in a hotel in another city. I tried using the ip provided through ipconfig and whatsmyip.com, but I am unable to connect through remote desktop connection.
View 6 Replies
View Related
Nov 16, 2011
I'm really having a hard time configuring Remote Desktop Connection.I'm trying to set up a session between my laptop at work(Windows 7 Home Premium) and my PC at home(Windows 7 Ultimate). Now the settings are fine ('Allow Remote Assistance connections to this computer' and 'Allow connections from computers running [CODE]
View 4 Replies
View Related
Dec 6, 2011
when i start making a connection using broadband 'error 711' occurs saying 'remote access connection manager could not start in time.
View 1 Replies
View Related
Sep 8, 2011
I have Dell Latitude E6420 which Window 7,IE9. We use F5 Network & Symantec Antivirus in Office.Yesterday I tried to do remote desktop connection of my Off PC. The URL[xxx/itt] i used errors saying " Your device doesnt not comply the client security policies".tell me which version of IE,antivirus with F5 support Window 7 to do remote connection?
View 4 Replies
View Related
Jun 19, 2009
i am a german with a workstation and a notebook with spanish keyboard.
after each remote session (notebook desktop on workstation) numlock is enabled on the notebook.
my notebook has no number block, each time i have to press an unpleasant
FN keystroke.
View 1 Replies
View Related
Apr 25, 2011
I have been trying for a very long time to set up a Remote Desktop Connection to my work server, and am unable to set it up and connect. The network administrator gave me the IP address for the server and I have double checked that it is correct.He told me not to add anything else to the number when I set it up, but Windows Remote Desktop Connection setup wizard says it must have "https://" before the IP number so I put that in.I always get this error: Quote: An error occurred. Contact your workplace administrator for assistance. I thought it might be a Windows Firewall issue, so I went to check if it was allowed. Remote Desktop Connection Windows 7 how to add it because when I clicked to add another program, it was not listed as an option.I read this tutorial Remote Desktop Connection (RDC) - Network and the first photo under "Option Two" in that post shows Advanced System Settings with a section on Remote Desktop.On my computer it only shows the "Remote Assistance" section and does not show "Remote Desktop" at all, and I'm not sure why.My ISP is AT&T. I have DSL with a wireless router. Is it possible that AT&T is blocking the port I need to use? I connect to the server at my office and know my credentials are good, but I don't even get to the point of being able to enter them when I try to set up the Remote Desktop Connection at home.
View 9 Replies
View Related
Oct 31, 2011
I have two computers one laptop one desktop. Just connected to the laptop via RDC. The laptop logs off on my laptop, I can view the RDC on my desktop.
Is it possible to stop the laptop from logging off?
View 8 Replies
View Related
Sep 9, 2009
This morning I was working in eplorer to move some files, and Windows 7 asked me if I wanted to turn on filtering mode, and I confirmed.
Now when I use my remote desktop session from a windows xp machine that has always worked, I now only have control with my mouse, but no more keyboard input.
I do not know if the filtering mode has anything to do with it, but I cannot figure out why I cannot use my keyboard anymore in RDP. Funny thing is, it DOES work when I login to windows 7, I can type my password but when the desktop is there, I cannot use the keyboard anymore..
Any suggestions anyone?
View 2 Replies
View Related
Jul 25, 2012
I am trying to setup a RDC with a static IP for my PC so I can access it from work. I started messing around with my laptop and PC trying to Remote Access them from one to another locally before doing set up my router to do port forwarding. I noticed that none of my laptops in my house can connect to my PC for Remote Access but I can connect to any laptop from my pc. I don't know what's going on. I've changed the IP on my PC 4 times and still nothing. Hard reset on my router, but nothing.
View 2 Replies
View Related
Nov 8, 2009
I cannot establish a remote desktop connection between two computers in my home LAN running Windows 7.I have two computers in my home network, VAIO and SCALEO. On VAIO I installed Windows 7. On SCALEO I installed both Windows XP and Windows 7 as dual boot configuration. The Windows 7 version I am using is the free downloadable evaluation installation of Windows 7 Enterprise. Both installations are activated.When I run Windows XP on SCALEO (and Windows 7 on VAIO), I can establish RDC between both computers, both ways, without any problems.When I run Windows 7 on SCALEO (hence, on both machines), establishing RDC fails on either machine with the following message:"Your credentials did not work. The credentials that were used to connect to ... (VAIO/SCALEO) did not work. Please enter new credentials."I have followed all instructions in the tutorial of this forum how to set up a computer for remote desktop connection. I can see both machines in their network folders. I successfully established a homegroup where both machines share data. I am able to share folders on both machines and map them as network drives. I am able to copy data between both machines.
View 3 Replies
View Related
Feb 13, 2009
How to Enable Windows 7 to make a Remote Desktop Connection ?
View 0 Replies
View Related
Dec 22, 2011
Looking for info about remote connection between desktop and laptop?
View 2 Replies
View Related
Jul 8, 2012
I am trying to connect to another Windows 7 machine on the same router, but it will not connect. I have remote desktop enabled and checked under the computer settings, but when I right click the computer in the network & sharing center and try to connect, it won't work. I also tried manually entering the computer's network address but it failed. Both machines are Windows 7.
View 3 Replies
View Related
Feb 7, 2011
How do you connect to another PC using remote access, I can connect to another computer at my house but I want to connect to my uncle's from Arizona to California. What IP adress do you write down because everyone has the same 192.168.1.1 so if i put that it will connect to another one in my house. Is there some other IP adress that I can use. How can i connect to his PC.
View 3 Replies
View Related
Oct 16, 2011
Remote Desktop Allowed
Regedit set to 3389
Norton 360 mstsc.exe allowed in traffic rules
ping to workstation replied
just can't get remote desktop to connect? any other things I should check?
View 9 Replies
View Related
Jul 7, 2012
Windows 7 (64-bit) will not connect to a remote location via VPN. I connect from my desktop running windows XP, but cannot connect on my Toshiba laptop running Windows 7.
View 2 Replies
View Related
Oct 17, 2009
Just recently immigrate to win 7, I used to connect my XP work computer via remote desktop from home, now I cant . The ping command works fine. How can I solve this problem?
View 9 Replies
View Related
Jun 27, 2011
I would like to setup a remote desktop connection between 2 computers in my LAN at home(both win7). Both comps are on the network and remote desktop is enabled for both of them. It doesn't want to connect (even with my firewalls turned off) and keeps saying: Remote Desktop can't connect to the remote computer for of of these reasons: ... What am I doing wrong? Note that I did allow Remote Desktop on both computers' firewalls?
View 7 Replies
View Related
Jul 4, 2012
I am trying to use my remote desktop connection on my computer to another computer in my home I am using windows 7 but when I try to connect it looks for a password which I have not got where can I find a password
View 6 Replies
View Related
Feb 24, 2011
I have been dealing with an issue where I am only able to get on a couple of websites, while every other website will not load. I have checked my auto-config settings and ive reset Internet Explorer. I used Microsoft's tool that tells you what the problem is and it came up with "the remote device or resource won't accept the connection".
View 11 Replies
View Related
