BSOD After .dll Error, Desktop Boots To Black Screen With A Cmd Prompt
Mar 17, 2012
then the desktop finally loads. It only lasts about 60 seconds before BSOD'ing again. Safe Mode seems ok, but I was in the process of typing up this thread when safe mode shut down on me randomly. I've tried restoring to earlier points and running malware scans. Minidumps are included.
View 9 Replies
ADVERTISEMENT
Feb 25, 2012
I have a gaming laptop asus g71g with windows 7 loaded on it. When I try to boot up it gets to right before the windows symbol would load and the screen just goes black but the comp stays on.
View 1 Replies
View Related
Sep 14, 2010
A few weeks back the PC would not wake up from it's sleep mode so I turned it off and it fixed the problem but now when I turn the PC on it boot's and I hear the 'MS jingle' but I am looking at a black screen, after hitting the restart button it start's up and I get the massage the PC was not closed down properly what mode do I wish to start it in, I have checked the task manager before closing down a number of times and there has been nothing running at close down?
View 8 Replies
View Related
Aug 20, 2012
Back when it was released, I installed Windows 8 preview on a new partition of my Windows 7 laptop. Ive been switching back and forth no problem, but about a month ago when trying to log in, I typed in my password and was stuck at the black screen with a cursor. After a few restarts and startup repairs it sorted itself out. Now, it's happened again, but this time, startup repair isn't doing the trick. It reports no OS found in the error. I am dual booting between 7 and 8, and in trying to login to 7, typing my password, it again brings me to the black screen with a cursor. I cannot press Ctrl+Alt+Del to reach the task manager and manually start explorer.exe, and same thing happens in safe mode.
I have checked my C drive and saw there were backups of my explorer.exe, so I tried to switch them up with the current one. At one point, I could get to my desktop and see all of my taskbar icons, however hovering over the taskbar would show a loading cursor and I could not open anything. Restarting again brought me back to the black screen. I have tried fixboot, fixmbr, BCD editor, etc, to no avail. I have also tried "last known good configuration", system restore (which reports no restore points...) and checking the registry to verify explorer.exe is the only listing in the Shell file. Also, virus scan MBAM and others: No viruses.
Errors: At one point with the black screen, I let it sit, and a few errors came up after an hour or so... dwm.exe unable to start correctly error 0xc000185, explorer.exe unable to start correctly error 0xc000185, then when pressing Ctrl+Alt+Del, "Failure to display security and shut down options". In viewing one of the error details, it reported problem event name InPageCoFire, damaged file name propsys.dll. I replaced that file and a clean one and no change. Right now I am using Windows 8 boot. I can see all of my files are still in the Windows 7 partition.
View 1 Replies
View Related
May 28, 2012
I recently formatted my main drive (upgrading from Vista to Win. 7), and it worked perfectly.It asked to install some updates, including my graphics card and everything else.Then it restarted, and updated a few registry settings ( I think somewhere around 5600-56000, alot more than a few lol), and it black screened when it came to the login screen. I tried logging in, and I could hear the sounds and everything else, so I think it's the graphics card that's the problem.I tried booting into safe mode and uninstalling/reinstalling the graphics driver, but it still black screened.I checked almost every other topic about this, and I tried everything but it didn't work, but i'm still open to more common suggestions.
Right now, i'm just running on the on-board graphics in normal boot mode.System Specs:OS Version: Microsoft Windows 7 Home Premium, 64 bitProcessor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 7Processor Count: 4RAM: 6078 MbGraphics Card: NVIDIA GeForce GT 120, 1024 MbHard Drives: C: Total - 280139 MB, Free - 253850 MB; D: Total - 420255 MB, Free - 420153 MB;Motherboard: Acer, EG45MAntivirus: None, I will be adding Kaspersky later.
View 1 Replies
View Related
Jul 17, 2012
Basically I woke up this morning to my computer sitting at a black screen with the cursor visible I'm able to move the cursor but do nothing else I rebooted my computer my manually shutting it off and then it started up as it would normally but did this disc check:[URL]from there it moves back to the black screen with the cursor I again restarted and booted in safe mode this time I was then able to reach windows and tried to do a system restore to an earlier point When i did this i was greeted with this error [URL]Finally here is my harddrive just in case [URL]I exported my full system info so please let me know if more info is necessary
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer INTEL_
[code]....
View 8 Replies
View Related
Sep 27, 2012
I turned on my computer tonight and before booting it started scrolling text saying deleting corrupted files and scanning files etc...this went on for at least 10-15 minutes and then when it was done it said "Starting Windows" like normal, then brought me to a black screen that said "Preparing to configure windows...do not turn off your computer". That message disappeared after a few seconds and left me with a black screen with a mouse cursor. In the bottom right hand corner of the screen is a power button, bottom left is ease of access button and bottom center it says Windows 7 Home Premium.
I can't do anything with this. I've restarted numerous times, and I've tried restarting in Safe Mode and it still brings me to this point every time. I've also tried using system restore and startup repair through the advanced settings from pressing F8 during boot up.
PS. I did not upgrade my version of windows or anything...Windows did install some updates last time I turned off the computer I think.
View 4 Replies
View Related
May 18, 2012
my computer boots up to a black screen with a mouse. The problem is, when I boot from anything or into any option I get this. Safe Mode gets me black screen, so does booting from a Win 7 Recovery disk, everything puts me in a black screen with cursor. At first it will show Windows logo on the screen, with loading bar, then cuts out, and cursor pops up. That's it.Also, when I try to boot normally, it hangs at Windows logo, then flashes a quick blue screen then reboots.
View 1 Replies
View Related
Oct 19, 2012
I can boot windows seven but the screen goes black when i select my user icon and the mouse pointer is visable and moves but nothing is there to click. I can get into taskmanager but there is nothing i can do there either. I have lost my instal/upgrade disk. This was an upgrade from vista.
View 1 Replies
View Related
Dec 6, 2012
I bought my acer recovery and system discs and loaded them everything went smooth untill the end put last disc in and it loaded it and then said windows will complete installation after restart then it shut off and restarted the lil wii fii light came on and blue disk light blinks but nothing on screen?
View 1 Replies
View Related
Feb 13, 2013
So this started out as a driver issue - I couldn't seem to install the updated drivers for my ati radeon hd 5 series (I don't have access to my actual specs right now) video card no matter what I tried. Each time it would seemingly revert to the awful on-board graphics and I would have to perform a system restore to correct it. Rinse and repeat. Eventually, I tried one forum poster's recommendation of updating my bios, which managed to bork the computer so bad that it broke the system restore function altogether. So, time to reinstall windows.The computer is a dell xps9100 and didn't come with a windows 7 cd, so I restored to the factory image of windows 7 through the advanced boot menu. It seemed to work, but when it rebooted I got the windows logo and then nothing (black screen, no cursor).
View 5 Replies
View Related
Dec 13, 2011
I tried a registry tweak to fix my home networking issues and came up with a major fail. Long story short, I changed the rpcedptmapper value and the system won't boot.I put the HDD in a cradle and it won't get recognized. HP in all their wisdom, sets the recovery disk to obliterate the entire HDD even if you created a separate boot partition
View 5 Replies
View Related
Jul 17, 2012
Basically I woke up this morning to my computer sitting at a black screen with the cursor visible. I'm able to move the cursor but do nothing else. I rebooted my computer my manually shutting it off and then it started up as it would normally but did this disc check: [URL] from there it moves back to the black screen with the cursor. I again restarted and booted in safe mode this time. I was then able to reach windows and tried to do a system restore to an earlier point. When I did this i was greeted with this error [URL]. Finally here is my harddrive just in case [URL]. I exported my full system info:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer INTEL_
System Model DH67BL__
System Type x64-based PC
Processor Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Intel Corp. BLH6710H.86A.0076.2010.1115.1959, 15/11/2010
SMBIOS Version 2.6
Windows Directory C:Windows
System Directory C:Windowssystem32
Boot Device DeviceHarddiskVolume1
View 4 Replies
View Related
Oct 7, 2012
but I was given it used from the previous owner and later found out it was refurbished. It is a Gateway NV53A. I have always had issues with BSOD's and Windows errors, and most of them either driver or memory related. I fixed and updated all drivers, but never did anything about memory except maybe some tests and they all came out fine. 3 days ago, I was using my PC just browsing a Web page and suddenly the screen went black. I thought it was the lcd, but I closed the lid to see if it would go into standby mode and it just stood there powered on and frozen... The only way it would react was if I manually turned it off holding power button.
Sometimes it does boot up, sometimes it gets farther than others. What I mean is, sometimes it gets past the Gateway logo and crashes there, sometimes it boots up to to the home screen, and sometimes it doesn't even boot... How far it gets depends on how long the PC has been turned off. Odd I know... Anyways, I found out my motherboard requires ram with 1066mhz fsb whereas the current ram sticks it has installed are 800mhz.... I was told new ram with 1066mhz would fix my issues and allow my PC tu boot and run fine as it always did, but I just wanted to be sure that's my Issue, and I also wanted to know how come the computer ran fine (with the exception of BSOD's and some errors occurring every now and then) before and now suddenly I'm screwed. I'm currently using two 2GB DDR3 Ram memory sticks. The brand and model of each stick is Nanya nt2gc64b88b0ns-cg
View 2 Replies
View Related
Oct 15, 2012
i was using my HP 2711x last night and it was working wonderfully, and today i turn it on to do some homework and it doesn't show me the login screen, it's just black. and then i try it in safe mode and it works, what could be the problem? and can you explain step by step so i don't miss anything
View 3 Replies
View Related
Feb 14, 2012
For the past few weeks I have noticed my laptop becoming slower and slower. As of a few days ago it has been ridiculously slow and is sometimes unresponsive to commands or keyboard. It used to go straight to a black screen with only the cursor after start up but now sometimes starts up, although very slow. Now my desktop started doing it too. I don't know what's going on with them. I had not had any virus protection for a while and recently installed webroot complete 2012 on both of them and scanned, finding nothing. My desktop sometimes loads into safe mode when I tell it to, however it still is extremely slow, SAme with he laptop. And if I try to start up the desktop on normal is stays on black screen. I have noticed that sometimes I will get the "Microsoft windows isn't responding" pop up. My control alt delete doesn't work on either of them either, it pos up suing something like " the control alt delete function could not be started blah blah blah".
View 2 Replies
View Related
May 24, 2011
I recently downloaded Oceanis so that I could change my desktop; however, today my desktop is black.
View 1 Replies
View Related
Aug 3, 2011
ok basically lately my remote desktop is flaky.
Scenario is. Activated Windows 7 N Ultimate as host machine (in other room) Activated Windows 7 Ultimate as client machine, am using it now.
If I remote desktop in after logging in locally on the host, I get the black screen for approx 2 minutes at which point it closes with an error.
If I remote desktop in whilst the host is logged out I can connect and log in fine. If I detach from a running remote desktop session and try to relogin again, I get the black screen sympton again and have to logout locally on the host to be able to login again on remote desktop. If I try to login locally on the host whilst the black screen is up here I get rejected due to remote desktop service been busy. I have to wait for the window to close.
View 2 Replies
View Related
Feb 8, 2012
My desktop changed by itself and when I am online the screen goes to black every few minutes even though I am sure I disabled the sreensaver. My antivirus icon also disappeared from the website.
View 1 Replies
View Related
Dec 14, 2012
A few days ago my home built windows 7 computer did an automatic download. After the download installed itself I tried to turn on my computer. I got a black screen on my monitor. Was this download a virus?
View 1 Replies
View Related
Mar 12, 2012
I am stuck at a black screen with a white arrow you can move with your mouse. right click does nothing. heres what i tried so far just linking to another forum so its easier to see where i am at. really want to avoid having to reinstall windows.
View 9 Replies
View Related
Feb 19, 2010
I connect to my work computer through a VPN and remote desktop, and often times remote desktop (I use NLA) works once, but after the first disconnect I can't login remotely. Power settings on the computer are set so it never goes asleep and never turns off the display.
In addition, when this happens, I find the computer has a black screen either before or after login when I go into my office to login directly to the computer.
This problem seems to occur on several computers, including on Win 7 Pro x32 and x64.
View 9 Replies
View Related
Sep 11, 2012
When I shutdown, right near the end the screen goes black as one would expect and then for a fraction of a second I get BSOD and it will restart and let me know that it BSOD'ed. It's a new install of windows 7 on a new PC that is working well under stress testing. And i haven't messed with much but xbmc and some light overclocking without voltage changes. I've uninstalled anything recent and some tuners that the mobo manu had on their support page.
View 1 Replies
View Related
Jan 8, 2012
bought a dell touchscreen inspiron one 2320, thought it would be better than my two year old dell (don't see it yet). i am an average user and i am not impressed. anyway the question is why does the monitor go black after 1 minute? i have done all the normal stuff in power options. change power saving settings, change when the computer sleeps. choose when to turn off display. turn hibernation on or off. i upload to Internet and it the shutting down makes it frustrating....
View 11 Replies
View Related
Oct 4, 2012
I have an MSI Laptop which I bought about a year ago was running fine and at the beginning of September started having the issue of a black screen, for about 45-60 seconds, between the windows logo and the desktop loading.
The laptop has:
Intel Core i7 460M Processor 2.53Ghz
Genuine Windows® 7 Home Premium 64-bit
4G DDR3 memory
Nvidia GeForce GT 540M
15.6" 1366x768 HD
Intel® HD Graphic VGA
[code].....
The above 3 files exist in the directories asked for so not sure why it can't load them.Although the laptop works fine when it's loaded, the additional time on this blackscreen is just winding me up as it didn't do it before.
View 3 Replies
View Related
Feb 6, 2013
my desktop screen suddenly has a 3 inch vertical black line which splits the screen in two and makes it impossible to move the cursor from the right side to the left.
View 1 Replies
View Related
Oct 31, 2011
This Dell Vostro is 2 years old, it has Windows 7 installed. When the internal wireless card is turned on, it connects alright for about 5 minutes and then the computer will BSOD or Black Screen then restart. Ethernet works fine.It has a strange behavior history.Before reformat, I ran Malwarebytes which detected malware in Adobe CS5, after clearing that up it stopped BSODing for a day of constant use. Then the wireless card stopped working at all. Windows could not even detect it for a few days. After the Windows reformat and reinstall it started working for half a day. Had the latest Dell driver installed for it.Today it BSOD's and Black screens after a few minutes. We have to turn off the radio toggle to keep it from crashing Windows.There was liquid spill about a month and a half ago. It was about an 1/4 cup of wine, attended to promptly. Within seconds of the spill it was shut down and put in front of a dehumidifier for a few days and turned upside down. It is possible it corrupted the card or card slot, but we have no other issues with the computer. I don't suspect this but it is worth mentioning. Our next step is to purchase a new card, examine for corrosion on the slot or card, but.......I have to say I still suspect a software conflict.
What has already been done:
Reformated and reinstalled Win 7
Uninstalled and reinstalled the card drivers
Updated all service packs and win updates.
View 2 Replies
View Related
Jan 28, 2013
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
Additional information about the problem:
BCCode:116
BCP1:FFFFFA800C9924E0
BCP2:FFFFF8800616DADC
[code]....
The problem I am having is this: Screen on Windows 7 pc 64 bit turns to black and everything freezes monitor light turns from blue to orange and my desktop is gone I have to hit the power button on the tower to shutdown and power it back up again. Happens every couple of hours or so. If I open up skype to make a phone call it does this to my computer as well.
View 8 Replies
View Related
Aug 27, 2011
When I start up my laptop (HP Pavillion dv5-1125nr, Windows 7 Ultimate ~3 years old) it loads normally... Until it hits the login screen. The , it starts to go, makes the sound... Then goes black.I just had my monitor and motherboard replaced for another issue I was having, so I don't think it's a physical issue. I have also ran a few malware/spyware tests and nothing comes up. My diagonstics, as well, turn up cleanly.The laptop runs perfectly in safe mode, however
View 1 Replies
View Related
Jul 9, 2012
Recently my pc starded giving me a Black screen with interactive mouse pointer after the windows logo. I think the official term
View 1 Replies
View Related
Dec 6, 2012
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8117 Mb
Graphics Card: ATI Mobility Radeon HD 5470, 1024 Mb
Motherboard: ASUSTeK Computer Inc., K42Jr
Antivirus: Norton Internet Security, Updated and Enabled
I would get a random black screen while playing an online game on my laptop (this happens randomly but usually 15-30mins after starting Windows and start playing the game). After the black screen appeared, it would automatically reboot to this windows error recovery page with options to go into safe mode (networking/command prompt) or just boot windows normally.I chose to boot Windows normally but after getting into Windows 7 and started playing a while, a random BSOD would appear. It has happened for 2-3 days straight. The attached is the mini dump.
Note: I did not install anything new to my laptop, I have ran chkdsk and sfc /scannow and found nothing.I have no idea what caused the black screen and the BSOD.
View 4 Replies
View Related