Windows 7 Boots, Black Screen On Login?
May 28, 2012
I recently formatted my main drive (upgrading from Vista to Win. 7), and it worked perfectly.It asked to install some updates, including my graphics card and everything else.Then it restarted, and updated a few registry settings ( I think somewhere around 5600-56000, alot more than a few lol), and it black screened when it came to the login screen. I tried logging in, and I could hear the sounds and everything else, so I think it's the graphics card that's the problem.I tried booting into safe mode and uninstalling/reinstalling the graphics driver, but it still black screened.I checked almost every other topic about this, and I tried everything but it didn't work, but i'm still open to more common suggestions.
Right now, i'm just running on the on-board graphics in normal boot mode.System Specs:OS Version: Microsoft Windows 7 Home Premium, 64 bitProcessor: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 7Processor Count: 4RAM: 6078 MbGraphics Card: NVIDIA GeForce GT 120, 1024 MbHard Drives: C: Total - 280139 MB, Free - 253850 MB; D: Total - 420255 MB, Free - 420153 MB;Motherboard: Acer, EG45MAntivirus: None, I will be adding Kaspersky later.
View 1 Replies
ADVERTISEMENT
Jul 17, 2012
Basically I woke up this morning to my computer sitting at a black screen with the cursor visible I'm able to move the cursor but do nothing else I rebooted my computer my manually shutting it off and then it started up as it would normally but did this disc check:[URL]from there it moves back to the black screen with the cursor I again restarted and booted in safe mode this time I was then able to reach windows and tried to do a system restore to an earlier point When i did this i was greeted with this error [URL]Finally here is my harddrive just in case [URL]I exported my full system info so please let me know if more info is necessary
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer INTEL_
[code]....
View 8 Replies
View Related
Sep 27, 2012
I turned on my computer tonight and before booting it started scrolling text saying deleting corrupted files and scanning files etc...this went on for at least 10-15 minutes and then when it was done it said "Starting Windows" like normal, then brought me to a black screen that said "Preparing to configure windows...do not turn off your computer". That message disappeared after a few seconds and left me with a black screen with a mouse cursor. In the bottom right hand corner of the screen is a power button, bottom left is ease of access button and bottom center it says Windows 7 Home Premium.
I can't do anything with this. I've restarted numerous times, and I've tried restarting in Safe Mode and it still brings me to this point every time. I've also tried using system restore and startup repair through the advanced settings from pressing F8 during boot up.
PS. I did not upgrade my version of windows or anything...Windows did install some updates last time I turned off the computer I think.
View 4 Replies
View Related
Oct 19, 2012
I can boot windows seven but the screen goes black when i select my user icon and the mouse pointer is visable and moves but nothing is there to click. I can get into taskmanager but there is nothing i can do there either. I have lost my instal/upgrade disk. This was an upgrade from vista.
View 1 Replies
View Related
Dec 6, 2012
I bought my acer recovery and system discs and loaded them everything went smooth untill the end put last disc in and it loaded it and then said windows will complete installation after restart then it shut off and restarted the lil wii fii light came on and blue disk light blinks but nothing on screen?
View 1 Replies
View Related
Feb 13, 2013
So this started out as a driver issue - I couldn't seem to install the updated drivers for my ati radeon hd 5 series (I don't have access to my actual specs right now) video card no matter what I tried. Each time it would seemingly revert to the awful on-board graphics and I would have to perform a system restore to correct it. Rinse and repeat. Eventually, I tried one forum poster's recommendation of updating my bios, which managed to bork the computer so bad that it broke the system restore function altogether. So, time to reinstall windows.The computer is a dell xps9100 and didn't come with a windows 7 cd, so I restored to the factory image of windows 7 through the advanced boot menu. It seemed to work, but when it rebooted I got the windows logo and then nothing (black screen, no cursor).
View 5 Replies
View Related
Jul 17, 2012
Basically I woke up this morning to my computer sitting at a black screen with the cursor visible. I'm able to move the cursor but do nothing else. I rebooted my computer my manually shutting it off and then it started up as it would normally but did this disc check: [URL] from there it moves back to the black screen with the cursor. I again restarted and booted in safe mode this time. I was then able to reach windows and tried to do a system restore to an earlier point. When I did this i was greeted with this error [URL]. Finally here is my harddrive just in case [URL]. I exported my full system info:
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name *****
System Manufacturer INTEL_
System Model DH67BL__
System Type x64-based PC
Processor Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Intel Corp. BLH6710H.86A.0076.2010.1115.1959, 15/11/2010
SMBIOS Version 2.6
Windows Directory C:Windows
System Directory C:Windowssystem32
Boot Device DeviceHarddiskVolume1
View 4 Replies
View Related
Oct 15, 2012
i was using my HP 2711x last night and it was working wonderfully, and today i turn it on to do some homework and it doesn't show me the login screen, it's just black. and then i try it in safe mode and it works, what could be the problem? and can you explain step by step so i don't miss anything
View 3 Replies
View Related
Feb 25, 2012
I have a gaming laptop asus g71g with windows 7 loaded on it. When I try to boot up it gets to right before the windows symbol would load and the screen just goes black but the comp stays on.
View 1 Replies
View Related
Sep 14, 2010
A few weeks back the PC would not wake up from it's sleep mode so I turned it off and it fixed the problem but now when I turn the PC on it boot's and I hear the 'MS jingle' but I am looking at a black screen, after hitting the restart button it start's up and I get the massage the PC was not closed down properly what mode do I wish to start it in, I have checked the task manager before closing down a number of times and there has been nothing running at close down?
View 8 Replies
View Related
Feb 18, 2012
my computer boots up and after log-in the welcome comes on, then my screen turns blue. i can move the cursor but nothing shows...it works fine in safe mode?
View 1 Replies
View Related
May 18, 2012
my computer boots up to a black screen with a mouse. The problem is, when I boot from anything or into any option I get this. Safe Mode gets me black screen, so does booting from a Win 7 Recovery disk, everything puts me in a black screen with cursor. At first it will show Windows logo on the screen, with loading bar, then cuts out, and cursor pops up. That's it.Also, when I try to boot normally, it hangs at Windows logo, then flashes a quick blue screen then reboots.
View 1 Replies
View Related
Dec 13, 2011
I tried a registry tweak to fix my home networking issues and came up with a major fail. Long story short, I changed the rpcedptmapper value and the system won't boot.I put the HDD in a cradle and it won't get recognized. HP in all their wisdom, sets the recovery disk to obliterate the entire HDD even if you created a separate boot partition
View 5 Replies
View Related
Oct 7, 2012
but I was given it used from the previous owner and later found out it was refurbished. It is a Gateway NV53A. I have always had issues with BSOD's and Windows errors, and most of them either driver or memory related. I fixed and updated all drivers, but never did anything about memory except maybe some tests and they all came out fine. 3 days ago, I was using my PC just browsing a Web page and suddenly the screen went black. I thought it was the lcd, but I closed the lid to see if it would go into standby mode and it just stood there powered on and frozen... The only way it would react was if I manually turned it off holding power button.
Sometimes it does boot up, sometimes it gets farther than others. What I mean is, sometimes it gets past the Gateway logo and crashes there, sometimes it boots up to to the home screen, and sometimes it doesn't even boot... How far it gets depends on how long the PC has been turned off. Odd I know... Anyways, I found out my motherboard requires ram with 1066mhz fsb whereas the current ram sticks it has installed are 800mhz.... I was told new ram with 1066mhz would fix my issues and allow my PC tu boot and run fine as it always did, but I just wanted to be sure that's my Issue, and I also wanted to know how come the computer ran fine (with the exception of BSOD's and some errors occurring every now and then) before and now suddenly I'm screwed. I'm currently using two 2GB DDR3 Ram memory sticks. The brand and model of each stick is Nanya nt2gc64b88b0ns-cg
View 2 Replies
View Related
Mar 17, 2012
then the desktop finally loads. It only lasts about 60 seconds before BSOD'ing again. Safe Mode seems ok, but I was in the process of typing up this thread when safe mode shut down on me randomly. I've tried restoring to earlier points and running malware scans. Minidumps are included.
View 9 Replies
View Related
Sep 2, 2012
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies
View Related
Nov 12, 2011
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies
View Related
Nov 16, 2009
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies
View Related
Jul 9, 2012
I have a HP Pavillion G6 - Windows 7 Home Premium
I still have warranty, and today when i start up my computer it just froze and it commanded me to go to Windows Recovery ( recommended ) it went through my files and tried to repair it and i had to system restore.
as i system restored into later save date, it said that it failed?! so i didn't know what to do there. i tried hardware resetting and it didn't work.
also when i turned on my computer it would sometimes go to the login screen and it would say welcome for hours and hours, untill it became a black screen and it froze with the cursor..
When i turn on my computer it would always flash or blink once on the caps lock.
View 2 Replies
View Related
Oct 18, 2012
i was trying to ghost my old HDD to my new SSD. So i got my software, turned off my computer and installed my SSD. My computer wouldnt boot off my old HDD so i looked in my BIOS menu for boot order. I seen that my SSD was set for slot 1 and my HDD was slot 2 for sata i thought that might be the problem, i saved and exited. Leaving my computer off i switched the sata cables and started it up again thinking that now my HDD was set for 1. I started up my comp and it started just fine, windows logo popped up and then my screen was black, i still had 1920x1600 resolution and my mouse cursor was there (small mouse cursor). I thought maybe it didnt boot correctly so i turned it off and put in my windows CD. started up again and booted off CD drive. Clicked on install windows, and clicked on Startup repair and let it run for about an hour with nothing really changng. It was getting late and i just wanted to take out the SSD and start fresh tomorrow night ( i only get 1-2 hours a night ) to get things working so i did a hard shutdown and went to bed. Tried it before work and still got a black screen with a movable small mouse cursor, tried it in safe mode with networking and i had 800x600 ( large mouse cursor) and it still wouldnt boot my desktop.my question is if i made it a slave, would i be able to salvage my important info? so when i get home tonight i have some sort of a game plan.
View 3 Replies
View Related
Jan 22, 2013
When user inputs credentials and hits enter it goes to windows log in screen but when it should go to desktop the user just gets a black screen with movable courser. This has happened to about 4-5 different pc's so far. My current fix is to backup their files on the network, delete their local user account and have them log in as if it was the first time again which creates a new profile and they can then log in with no problems. I saw a thread on this here already but it was about 2 years old and didnt give me any information on what is causing the problem.
View 3 Replies
View Related
May 23, 2012
W7 will start up, load files, and then stay at a black screen with a mouse. I think that the hard drive may have gone bad, and when I did a memory diagnosis, I have found that there is bad memory with my main hard drive. I do not have the original disk, nor can I access any of the files. I tried system Recovery, but it would not list W7 as an option. If someone knows where I could find those drivers to load onto a disk, that would be great. My computer is a Dell Studio 1535.
View 3 Replies
View Related
Jul 16, 2012
I have installed Windows 7 on Mac Bootcamp. It has been working perfectly fine for the past year but it is now restricting me to login with a black screen. The last time Windows 7 worked, I closed my laptop cover to put it to sleep. I came back to find that I was greeted with a black screen after opening my laptop. I rebooted my computer multiple times but the outcome is always the same: I would see the Windows icon (4 coloured squares), it would then show my cursor and then the screen would go black. I have tried to repair my computer but it says that there are no errors.I also tried to check for any other possible errors but they all come out negative.
View 1 Replies
View Related
Sep 26, 2012
I have some problem after install ubuntu alongside my windows 7.After I installing ubuntu, when I want to use my windows 7, when came to login area (because I place password on my account), it dont show nothing, just black screen with cursor, I tried it with safe mode and I can login but its dont work in normal mode. My friend said its maybe driver problem, then I try repair using my Windows 7 DVD and also start my windows with setting "Start with last known good configuration (i dont remember full) but the problem dont solve.
View 9 Replies
View Related
Jan 11, 2012
I upgraded my system with intel DG41 board and 8GB of ram, and it works fine...only somtimes when I boot into windows, after the booting screen, just I see a blank black screen, no task manager and explorer too, I tried different drivers for my nvidia 9500gt, and still same problem, and when i shutdown (holding the power button), and restart, then it works, it log in to windows normally?
View 5 Replies
View Related
Jun 30, 2012
My computer goes through start up but right beofre you log in it goes straight to the black screen. Therefore I can't see a cursor or complete the task manager. So what do I do?
View 1 Replies
View Related
Dec 12, 2011
[URL]This video shows pretty much what it looks like. Just installed Windows 7 on a different computer, and that's the screen I get when I turn on the computer now. CTRL+ALT+DEL does nothing, though the little buttons in the corners do work.
View 2 Replies
View Related
Jan 6, 2011
Once in a while my system. 64bit-Home-Premium, shows a black screen after the password has been entered to log on. I have not found any way out, except hard reboot.
View 9 Replies
View Related
Dec 15, 2011
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies
View Related
Mar 18, 2012
While attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
View 3 Replies
View Related
Jul 15, 2011
Currently, my computer will start up normally, and will, after the logo boot, end up at the login screen, except all I see is a black screen with the "Windows 7 Home Premium" at the bottom, and the red button on the bottom right, as well as the accessibility tools on the left side towards the bottom. I also have a working cursor. I dont see a user selection or anywhere to click anything except for the mention icons. I dont know what happened, but prior to this issue, I ran a Disk Check on startup as prompted. When I returned to the computer after the disk check completed, this issue occurred.
I have tried CTRL + ALT + Delete, but to no avail. I have also tried safe mode, but the same problem occurs, and all of the startup options I tried in the boot menu don't work either (Last known good configuration, Low resolution, safe mode, etc etc.). I tried checking for memory errors, and running chkdsk (Disk Check command) with the proper parameters (C: Drive, /r) in the command prompt with Startup Repair, both have no solution. Also, I don't have system restore turned on, so there are no available restore points.
Toshiba Qosmio X505-Q887
500GB HDD
4GB RAM
1GB Video Memory
Windows 7 Home Premium 64bit (x64)
View 1 Replies
View Related
