Networking Error Message When Trying To Access Shared Files
Aug 9, 2012
I have a Windows 7 desktop and laptop. My desktop can access shared files on my laptop just fine.
But for my laptop to access files on my desktop I have to have a password on my desktop and have it set to "password protected sharing." I guess this is not a big issue but I don't really want a password on my desktop because it doesn't go anywhere and it's another startup step...
I've tried taking the password off the laptop but that didn't help either.
View 1 Replies
ADVERTISEMENT
Nov 30, 2009
I have few XP Pro PCs and a windows 7 Pro x64. The XP PCs can see and access the shared Windows 7 but the Windows 7 couldn't. Windows 7 can see the XPs but when i click on the XPPCs it said Windows Can't Access XP-pc. I click the Detail and it said Network Path Wasn't found. I tried to Diagnostics and it couldn't find the problem. It looks like firewall blocked to me but i disabled windows firewall and security center from windows services. XPPCs don't have any firewall. from Windows 7 i can ping those XPs. I enabled most of the services related to the network.
From the windows7 can't open the its shared folders either. it said the network path was not fould
Is there any one has the same problem?
View 4 Replies
View Related
Dec 27, 2011
I have 4 worstations in the same HomeGroup I can access the files of workstation 1 from the two workstations but the 3th one in the 3th one the the shared folder appears but when I try to aceess the files inside I get an error can't acess contact administrator the pasword protection is disabled in the workstation 1 and I can access the files from the other two workstations so I have no clue what is going on I have disabled the firewall and Norton IS on both workstations but still can't access the content of the sahred folder
View 3 Replies
View Related
Dec 9, 2009
I guess this issue has been posted before but I am experiencing some trouble trying to connect from wireless.
Here are the details:
Windows 7 professional on Dell laptop
Windows XP professional on Dell desktop (has shared folders & printer)
Netgear Router WGR614
Laptop can see and access all shared files and printers whilst connected directly to router (via Ethernet) but cannot see them when connected via wireless.
Windows 7 troubleshooting is not too helpful.
Any suggestions?
View 6 Replies
View Related
Jan 19, 2012
Printer plugged into Win7 box - how to print from remote XP machine? describes an original difficulty I had getting remote computers (laptops and desktops) to print to a USB printer connected to my Windows 7 box. Read far enough and you'll see that I solved that problem using Networking issue - Win7 printer, XP remote machines.Fast forward 13 or so months. Since that time I have replaced the printer, I've had a motherboard and processor issue with my box (since fixed), and no interruption of things working as they should. My printer - Canon ip4800 series - is USB hardwired to my Windows 7 computer, and the other home computers - two Windows 7 laptops, an XP box, and an XP netbook - can print to the printer, and view files on my Windows 7 machine, over our wireless home network. And that's been constant through the changes described.
Then yesterday, for no known reason, my daughter's Windows 7 laptop stopped being able to print. She'd send jobs to the correct printer, but they'd just queue up, with the queue visible from her machine, but not when I looked at the printer from my machine (that is looking at the print queue from her machine shows the jobs, but looking at it from mine shows no jobs).Nothing I did would result in stuff from her machine, from any application, to go to the printer.I finally deleted the printer from her machine, figuring I'd just add it back.I try adding a printer to the laptop, it doesn't find the printer on the list of available printers. When I try adding it by typing the name - \mywin7canon ip4800 series - that fails.When I look at "network" from her laptop, my computer shows up, but if I click on it, Windows says it can't connect.
When I type ping her_computer from a DOS box, it can't find it - but when I type ping any_other_computer it finds those.Her laptop can get on the internet from our home wireless network. All the other computers in the house - Windows 7 and XP - can access shared files on my PC, and more importantly, print across the network to my USB printer.Please, patiently and precisely, guide me through stuff to check on my PC and her laptop, to get this working again. I've been through the network and sharing center on my PC and the settings are correct.Again, as it is right now, my printer is not defined on her laptop.Final, cro-magnon- level question here: If I did a system restore on her laptop, back to a point when it had been able to print, might that fix things?
View 5 Replies
View Related
Jan 18, 2012
I've been working with I.T. for years, and when I went to a client's last night to share a drive over the network so they can install a program on a secondworkstation and use the database on the original machine. Anyway, sharing this drive shouldn't have taken me more than five minutes. However, I'm encountering problems I've never seen before. The Win7 PC sees the Vista PC on the network, but not any of the shared drives. And when I try to explore the Vista PC from the Win7 PC, I get an errors: ""Your computer appears to be correctly configured, but the device or resource (Vista PC) is not responding."Both PCs are on the same network, obviously, AV software and Windows firewall disabled on both, Homegroup off on Win 7 machine, both machines on same workgroup "WORKGROUP," set with static local IPs/DNS, etc., and both able to access network resources and the internet. One thing I HAVE noticed, however, is that when exploring the network on the Vista PC, I can't see anything (including the Win7 machine,) except the Vista PC itself and the router.
Does anyone have any ideas as to what's wrong? I've tried pretty much everything I can think of. Even the SFC on the Vista PC didn't find any issues. I've checked the services, and all that should be running are set to Auto, and are started and running. I've looked for hours online, trying every possible option I can find, to no avail. I'm completely stumped! Never in my years in IT have I encountered this.
View 1 Replies
View Related
Jun 19, 2012
I edited a 2 minute piece on AVID Express Pro. Downloaded the piece to a Sn Disc and took it to another PV that runs Windows &...I've tried to upload the video to You Tube and get the "no disc" error. The computer that I used to create the video is operated by Windows XP.
View 3 Replies
View Related
Aug 31, 2009
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
What am I doing wrong here?
View 1 Replies
View Related
Oct 18, 2011
I keep receiving a pop up error message box at random times that shows Internal error and the message "Access is denied". I was able to take a screen shot of when it happened again in case anyone needs to see it. The times this pop up did show was once when I was using the calculator and the other was when I typed the specific page # I wanted to print out.
View 3 Replies
View Related
Apr 4, 2009
I have my Dell Inspiron 1501 notebook and my wife's Dell Deminsion 501 desktop connected through an Apple Airport Extreme via LAN cables. I have Windows 7 beta and my wife has Vista Home Premium.
When I click on Network both our machines show but when I click on her icon I get:
Network Error:
Windows cannot access DARLENELEGGI-PC
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
Error code: 0x80070035
The network path was not found
Clicking Diagnose involks Windows Network Diagnostics. After several tests it reports Troubleshooting could not identify the problem
When I click on Network on my wife's Vista machine my ROYLEGGITT-PC does not appear on her list of network items. However, she does have a wireless adapter and several local users appear. If I click on any of them, I get the exact same error message as above.
Anybody have an idea of how to fix this?
View 3 Replies
View Related
Oct 29, 2009
Windows 7 desktop (computer A) *Home Premium
Vista desktop (computer B)
Need step by step outlined / understanding how to get windows 7 to not only see but connect to Vista desktop.
note1: both computers are on same work-group (MSHOME).
note2: attempted from either station to connect A -> B or B -> A and was
unsuccessful each time (access denied).
There appears to be some permission issues preventing this from working. I need to understand how to be at root (top) level to allow for steps you outline to work.
**Please don't spare any details in describing how this can work.
View 1 Replies
View Related
Nov 13, 2009
There are 2 PC's in my house (soon to be 3), and they are running Windows 7 RC. I have a couple of drives that are dedicated to media (TV shows & Movies). When we both had XP Pro installed, all I had to do was right-click on the drive, go to Properties, Sharing and share the ENTIRE drive and it worked with no problems.
Now the problem I'm having is that when I try to share my media drive, I go through the same steps. The other Windows 7 computer can see the drive, he can go into it and see the folders inside that drive, but cannot access the other folders.
I also tried sharing the individual folders that are in the drive with the Homegroup and the same thing happens. He can see the folders just fine, but when he tries to view the contents of the folders it doesn't let him. Keeps telling him he doesn't have permission.
Here I thought Windows 7 improved their home networking, but it's really just became a big pain in the ass.
Can someone help? I just want to be able to share the entire contents of the drive with the other computer.
View 9 Replies
View Related
Jul 6, 2011
I have Windows 7 Professional x64.My pictures are located in this folder: L:Users<name>My Pictures
I want to share this folder with another user on my computer. Can't do it.
Simply altering the folder's permissions doesn't work. If I change permissions so that the folder in question does not inherit any permissions from parent folders, and instead allow my user read-only access to the folder...access denied.
Alright then, I tried to share the folder with my user. Although sharing usually means sharing with other computers on a network, it also applies to other users on the same machine. But the user can't access the shared folder...access denied.
I could move the folder in question to the Public user, but then everyone can see it. Holy cow...what does it take to share a folder with another user on the same computer?
View 6 Replies
View Related
Oct 11, 2011
We have just installed Windows 7 on one of our computers last week and we have 2 other computers that have an XP operating system The XP computers need access to shared folders on the Windows 7 computer and this was working fine yesterday However today it has suddenly stopped. I am getting errors about cannot access this drive etc I have checked up on security settings etc [URL]
View 3 Replies
View Related
Jan 3, 2013
Recently a few computers in our domain has switched to Win 7 from Win XP. Now after sharing folder shared folder are not visible while accessing that computer from our Win CE device. Windows XP or Win 7 users can browse shared folders but not WinCE device.Media Streaming, Network discovery, File sharing is Off. Firewall is turn off.
View 10 Replies
View Related
May 26, 2012
A week ago I had to reinstall Windows 7 on a second PC (PC2) which now has an SSD. However, the original disk (a 500GB Seagate) has been used to reorganise partitions of which there are now eight. Three of these I can access from PC1 with no problem. However, the last four plus a 1TB drive there is no way I can access them - I can look at them but there's no way I can copy any files or folders to them.I've checked the drive permissions via the Security tab and set everything I can to Full Control. However, out of the five there is one Name I cannot change and that is CREATOR OWNER which has permissions set to Special and which so far I've found no way of changing. In relation to the Names they are a little different to mine. All five are the same except that PC2 has CREATOR OWNER. I have Authenticated Users that PC2 doesn't have; none of PC2's drives have an Authenticated Users entry. Should it?
To clarify the Names we both have they are listed below:
PC1
Administrators (Username/Administrator)
Authenticated Users
Everyone
SYSTEM
[code].....
I've just checked a third PC we have upstairs and that is different again most drives ONLY having Everyone with only one drive having the Names above under PC1 but NOT Everyone. So I suppose that makes me one confused chick. What the hell gives with the Names Groups? What should I have and what should I NOT have or not need?
View 1 Replies
View Related
May 26, 2012
XP SP3 is used. The Simple File Sharing is not enable.Ping from Windows 7 to XP goes through.The same log-on user name and password are used for XP and Windows 7.XP machine is visible from Windows 7.Error message is "Unknown user name or bad password. The same message when attempting to access from another Windows 7.Initially it was working but after an hour or so, it quits. I rebooted the router, XP machine and Windows 7 machine but the situation remains unchanged. There is no problem networking between the two W7s.
View 4 Replies
View Related
Dec 19, 2012
I have just created a VHD on my laptop so I can share is as a shared area as I have over 5 computers in my house. I want the whole household to have access to the drive but not to a folder that i own as it contains private stuff. How would I go about protecting a folder from being accessed without the correct password and username. Or maybe, how would i go about stopping the folder from being accessed from the whole network but being able to access it on the local machine?
View 4 Replies
View Related
Nov 8, 2009
I have a brand new install of Win 7, after which I tried to install a LINKSYS Wireless USB Adapter (WUSB300N) and during the copy files installation process I get ACCESS IS DENIED.and the process stops. I only have one id defined and it of course has admin authority, so I don't know what is wrong.
View 6 Replies
View Related
Aug 18, 2012
1. my machine is a Getac B300 with a Windows XP Professional 32-bit/Windows 7 Professional 64-bit dual boot.
2. My wife's machine is a Toshiba U500 with Windows 7 Professioanl 64-bit.
Normally, I use the U500 as a hub: I connect it to the internet using a 3G-enabled Sony Ericsson Elm that I control through Sony Ericsson PC Suite 6.011.00* (I have an unlimited connectivity plan.) As soon as the U500 is connected, I set up a WEP-encrypted ad hoc network and connect my B300 (regardless of which system I happen to be booted into) and my wife's iPhone.** I can do the same if I choose to boot into Windows 7 on my B300 and use that as the hub.My question however, is as to why I can't get this whole setup to work out with Windows XP. I normally use the exact same way to connect to the internet (Elm and SE PC Suite), and I've attempted to set up an ad hoc network when I'm booted into Windows XP (through Windows and through Intel Proset), and I even managed to get the U500 and my wife's iPhone to connect to the network, but neither machine would get any internet access, even though I made sure to turn on Internet Connection Sharing for the connection.So I'm beginning to wonder if it's even possible to get it to work with XP (as opposed to 7) being the hub.
View 1 Replies
View Related
May 2, 2011
I have a Maxtor External Hard drive and Windows 7 Premium 64 bit. I have a user setup for each member of my family on the computer. The maxtor drive was working fine uptil I decided that I wanted only myself to be able to access it only. The drive appeared as my K drive. I went to sharing and added myself as read/write access and removed the everyone share thinking that only I would be able to use the drive. I restarted my PC and now nobody can access it. When I plug the drive into the usb slot the drive whirs up as normal but there is no drive letter for it and it does not appear in device manager etc. I plugged it into my old XP machine and that cannot read it either..
View 2 Replies
View Related
Oct 20, 2011
I'm using Windows 7 Home Premium 64bit and it's on a network with a Techgear MB902 PVR. I used to be able to watch movies in my Windows 7 shared folders on my TV via the MB902 but after I bought a new PC and installed Windows 7 I've had problems accessing the Windows 7 shared folders.
When I connect to my PC it asks for a login and password, and none of my pc or network passwords work. Strangely enough, when I restart Windows 7 the problem goes away and I can login successfully without a password, but then later the same day or the next day the login/password problem has returned.
I've trawled the internet looking for solutions, and tried all of the plausible looking ones, editing the registry, unsharing and then resharing. They all seem to work but then I realise that it's the reboot that works and not the fixes because the problem returns.
The MB902 has a hard drive and I can access the files on that from my PC with no issues it's just going the other way that I have problems.
View 1 Replies
View Related
Jun 19, 2011
I'm trying to access a shared folder on my windows xp machine. i went to map network drive, use different credentials, and typed in the account name and password that i had given rights to on the other computer. but it just reprompted for different credentials.as a temporary fix i created a user on this computer with the exact same credentials as the ones i typed in, and it works for that user. so apparently the computer didnt understand what i typed in for 'use different credentials'?
View 2 Replies
View Related
Dec 29, 2011
When moving or renaming files I frequently get an error messages informing me that "The action can't be completed because the folder or a file in it is open in another program". This typically happens with the second or third folder I try to rename or move. Navigating away to another folder and then coming back or closing explorer and reopening it usually helps but on the second rename or move I'm back to square one. I've been reading and searching on the forum and this is what I have tried so far:stop the windows media player network sharing servicepause indexingtemporarily disable antivirus softwareused the system file checker to check integrityall to no avail. This is without a doubt the most annoying "bug" I have run into so far as it makes it virtually impossible to get anything done or organised. Has anyone found a real solution to this problem that does not involve manually unlocking every single folder before working with it (using 3rd party software
View 9 Replies
View Related
Jul 31, 2012
I have a windows 7 os on my main pc and xp pro on my laptop. when i try to access files on my main pc (windows 7) from my xp pro laptop I get asked for a user name and password. Yet when I do it the other way round I have full access with out any password ect. I have not set up any passwords and have tried my home group password but not got any joy. I have 2 other laptops both running windows 7 and have no problems networking between all windows 7 systems. all computers are running norton firewall and are configered the same.
View 1 Replies
View Related
Aug 28, 2012
I have few computer at home with different Windows version, there are Windows XP, Windows Vista HP 32 bit and Windows 7 HP 64 bit. I have two share folder in the desktop using Windows Vista HP 32 bit, Share A is set to Full Control for Everyone and Share B has a permission access setting, allow few persons to access only. All computer can access Share A without problem. However, there is a problem with Share B. I only allow 3 users to access this share folder, 2 of them using laptop with Windows XP Home and Professional, they can access Share B without problem, the 3rd user using laptop with Windows 7 HP 64 bit (username is Jolene) can't access Share B, it shown "You have no permission to access...". I already double check the user name and password, there are correct. I try to login to the network using Jolene in other laptop with Windows XP, it can access both Share A and B. That means the username and the permission setting are correct in the Windows Vista desktop. I removed the anti virus in Windows 7 HP laptop, disable Windows firewall, or bootup in Safe mode with network support, but still can't access Share B.
View 7 Replies
View Related
Oct 6, 2012
I have 10 pcs on a LAN workgroup. They are mixed Windows 7 and xp. I have set the file sharing, net discovery etc on win 7 on and password protection, firewall off.They all have user accounts like pc1, pc2,...pc10 and I have also created the account of the pc I want to access the restricted folder to the pc that shares it.I have set the ownerships on Windows 7 machines too. I can access the folders on XP machines from the Windows 7 successfully. When I try to set a user-restricted shared folder to a Windows 7 pc and access it from XP I fail. It says that I do not have sufficient rights to access the folder, contact the network admin. I can only access to the folder by setting it available to "everyone" or "guest" read/write but that s not what I want.
View 4 Replies
View Related
Nov 26, 2012
The HomeGroup shares have been a recurring issue that I haven't been able to solve, but the really perplexing one is the shared folder issue which just cropped up. Some of my shared folders still work, but e, g and h (music and video respectively) for some reason spit back "Access Denied" on all of the other computers in my house, this is in spite of the fact that Permissions on them are set to Full Control for Everyone.With regards to HomeGroup shares, they simply don't show up no matter what I do, I'd like to fix that one too, but I'm not sure what I can do to fix that.
View 1 Replies
View Related
Oct 14, 2011
From virtual xp guest I can't access a shared folder on server 2003 machine.I can access it from windows 7 host.The Host, virtual xp, and server are all on the same workgroup.
View 3 Replies
View Related
Dec 4, 2011
i have multiple family members in the household, along with two Windows 7 desktops and three Windows 7 laptops. All pc's are on the same workgroup with file and folder sharing working faultlessly - we do not use Homegroups.I have a large amount of important data on my desktop that serves as a data backup for all work I do on my laptop. On top of this it contains a large amount of media files that get shared to all pc's too. All communication is done over the network. However, as the other family members are far less tech savvy, shall we say, than I, I am growing concerned with how easy it would be for someone else to access my laptop backup work, as it is all business related, and do something disastrous to it.I would like to have it so that my laptop is the only machine allowed to access this backup data from my desktop. The rest of the shared folders on this desktop would have to remain accessible to 'everyone'.
View 7 Replies
View Related
Sep 1, 2009
I have an intermittent problem with networking my desktop machine to my laptop. Sometimes after I hibernate my laptop and then wake it up, I am unable to access my shared drives on my laptop from my desktop. I am always able to go the other way (access shared drives on desktop from laptop. When it does this, even reboots of both machines don't help.
I just asked Windows 7 to diagnose and I get this. Usually after "messing" with the network settings, log offs, reboots, who knows, it usually starts working both ways again until some later hibernation restart of laptop. I wish I could pinpoint some common things that cause it but I just can't figure it out. Any ideas?
View 9 Replies
View Related
