I guess this issue has been posted before but I am experiencing some trouble trying to connect from wireless.
Here are the details:
Windows 7 professional on Dell laptop
Windows XP professional on Dell desktop (has shared folders & printer)
Netgear Router WGR614
Laptop can see and access all shared files and printers whilst connected directly to router (via Ethernet) but cannot see them when connected via wireless.
Printer plugged into Win7 box - how to print from remote XP machine? describes an original difficulty I had getting remote computers (laptops and desktops) to print to a USB printer connected to my Windows 7 box. Read far enough and you'll see that I solved that problem using Networking issue - Win7 printer, XP remote machines.Fast forward 13 or so months. Since that time I have replaced the printer, I've had a motherboard and processor issue with my box (since fixed), and no interruption of things working as they should. My printer - Canon ip4800 series - is USB hardwired to my Windows 7 computer, and the other home computers - two Windows 7 laptops, an XP box, and an XP netbook - can print to the printer, and view files on my Windows 7 machine, over our wireless home network. And that's been constant through the changes described.
Then yesterday, for no known reason, my daughter's Windows 7 laptop stopped being able to print. She'd send jobs to the correct printer, but they'd just queue up, with the queue visible from her machine, but not when I looked at the printer from my machine (that is looking at the print queue from her machine shows the jobs, but looking at it from mine shows no jobs).Nothing I did would result in stuff from her machine, from any application, to go to the printer.I finally deleted the printer from her machine, figuring I'd just add it back.I try adding a printer to the laptop, it doesn't find the printer on the list of available printers. When I try adding it by typing the name - \mywin7canon ip4800 series - that fails.When I look at "network" from her laptop, my computer shows up, but if I click on it, Windows says it can't connect.
When I type ping her_computer from a DOS box, it can't find it - but when I type ping any_other_computer it finds those.Her laptop can get on the internet from our home wireless network. All the other computers in the house - Windows 7 and XP - can access shared files on my PC, and more importantly, print across the network to my USB printer.Please, patiently and precisely, guide me through stuff to check on my PC and her laptop, to get this working again. I've been through the network and sharing center on my PC and the settings are correct.Again, as it is right now, my printer is not defined on her laptop.Final, cro-magnon- level question here: If I did a system restore on her laptop, back to a point when it had been able to print, might that fix things?
I bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
I have few XP Pro PCs and a windows 7 Pro x64. The XP PCs can see and access the shared Windows 7 but the Windows 7 couldn't. Windows 7 can see the XPs but when i click on the XPPCs it said Windows Can't Access XP-pc. I click the Detail and it said Network Path Wasn't found. I tried to Diagnostics and it couldn't find the problem. It looks like firewall blocked to me but i disabled windows firewall and security center from windows services. XPPCs don't have any firewall. from Windows 7 i can ping those XPs. I enabled most of the services related to the network.
From the windows7 can't open the its shared folders either. it said the network path was not fould
I have 4 worstations in the same HomeGroup I can access the files of workstation 1 from the two workstations but the 3th one in the 3th one the the shared folder appears but when I try to aceess the files inside I get an error can't acess contact administrator the pasword protection is disabled in the workstation 1 and I can access the files from the other two workstations so I have no clue what is going on I have disabled the firewall and Norton IS on both workstations but still can't access the content of the sahred folder
I have a Windows 7 desktop and laptop. My desktop can access shared files on my laptop just fine.
But for my laptop to access files on my desktop I have to have a password on my desktop and have it set to "password protected sharing." I guess this is not a big issue but I don't really want a password on my desktop because it doesn't go anywhere and it's another startup step...
I've tried taking the password off the laptop but that didn't help either.
I've been working with I.T. for years, and when I went to a client's last night to share a drive over the network so they can install a program on a secondworkstation and use the database on the original machine. Anyway, sharing this drive shouldn't have taken me more than five minutes. However, I'm encountering problems I've never seen before. The Win7 PC sees the Vista PC on the network, but not any of the shared drives. And when I try to explore the Vista PC from the Win7 PC, I get an errors: ""Your computer appears to be correctly configured, but the device or resource (Vista PC) is not responding."Both PCs are on the same network, obviously, AV software and Windows firewall disabled on both, Homegroup off on Win 7 machine, both machines on same workgroup "WORKGROUP," set with static local IPs/DNS, etc., and both able to access network resources and the internet. One thing I HAVE noticed, however, is that when exploring the network on the Vista PC, I can't see anything (including the Win7 machine,) except the Vista PC itself and the router.
Does anyone have any ideas as to what's wrong? I've tried pretty much everything I can think of. Even the SFC on the Vista PC didn't find any issues. I've checked the services, and all that should be running are set to Auto, and are started and running. I've looked for hours online, trying every possible option I can find, to no avail. I'm completely stumped! Never in my years in IT have I encountered this.
I use wireless network in school, and i want to access some files from other computers using the wireless connection.i use by toshiba c675 windows 7i have no clue on special tricks other than common knowledge of computer.
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
I have a Home network that was configured as follows:
Computers:
XP-Pro PC - connected via USB to a - Shared Photo Printer
Mac Leopard - connected via USB to a -Shared All-in-One Printer
XP-Pro Laptop
I also have an Ethernet networked Laser Printer and an Ethernet networked NAS.
With this setup I could print on all three printers from all three computers. I stored all documents, photos, music, etc on the NAS and it could be accessed very quickly from all three computers.
I replaced the XP-Pro PC with a new Win 7 PC. Now I cannot see the Shared All-in-One that is connected to the Mac via USB. I cannot get into the Mac from the Win 7 machine without an ID and Password which I never set and do not have. I can still print on the Mac-attached printer and get into the Mac from the XP-Pro laptop.
Can anyone help me to be able to access the Mac and to use the Mac-attached shared printer from the Win 7 machine?
I have Windows 7 Professional x64.My pictures are located in this folder: L:Users<name>My Pictures
I want to share this folder with another user on my computer. Can't do it.
Simply altering the folder's permissions doesn't work. If I change permissions so that the folder in question does not inherit any permissions from parent folders, and instead allow my user read-only access to the folder...access denied.
Alright then, I tried to share the folder with my user. Although sharing usually means sharing with other computers on a network, it also applies to other users on the same machine. But the user can't access the shared folder...access denied.
I could move the folder in question to the Public user, but then everyone can see it. Holy cow...what does it take to share a folder with another user on the same computer?
I just upgraded all of my computers to Windows 7 Professional and Office 2010 Professional Plus, and they're all running great. Much faster than the previous configuration, Windows XP Professional SP3 w/Office 2003 Standard. I'm using one computer to store all of the file backups and share the printer, a Dell Photo AIO 924. Everything's working fine, except for the printer. The printer prints from the computer its directly connected to, and I have it shared. However, when I try to connect other computers to it, I get an unable to connect to printer error with code 0x06. I checked a couple of things, Print Spooler service is running, network passwords are disabled, and all computers are in the same workgroup. I've gotten this to work before, but that was a while ago when I was running Windows 7 Enterprise trial on the same computer, everything worked great
I have an Epson 1290 connected to my Windows 7 Pro SP1 x64 PC, and it is shared with my Vista Home premium SP2 PC, the printer works fine when printing from my Windows 7 PC but when I try to print from my Vista PC, nothing prints and all the jobs are shown in the "Open Printer" Dialogue box.I have tried right clicking and selecting "Restart" on each entry but still nothing happens.The printer is the default printer for both PC's and shows up in the Control Panel/Printers box.
Does anyone know if you can use the Windows 7 Windows Fax and Scan with a shared printer? I got my computer to print via the shared printer, pero when I attempt to preform a "New Scan," it says no scanner is attached to my computer. Any insight?
I have Desktop A upstairs unto which a wireless router is connected for various devices.Downstairs I have a laptop that I use to connect to the wireless network. I also have Desktop B downstairs. I have an ethernet cable connected from my laptop to Desktop B.There is no drop downstairs so I wanted to connect the desktop somehow. I've enabled the wireless adapter to allow other computers to use its connection to connect to the internet.However, 2-4 times a day the connection simply stops.I don't have any of the computers on Homegroups or anything. All network drivers for all devices (wireless and wired) are updated. Using a Belkin N3000 wireless router.
We have just installed Windows 7 on one of our computers last week and we have 2 other computers that have an XP operating system The XP computers need access to shared folders on the Windows 7 computer and this was working fine yesterday However today it has suddenly stopped. I am getting errors about cannot access this drive etc I have checked up on security settings etc [URL]
Recently a few computers in our domain has switched to Win 7 from Win XP. Now after sharing folder shared folder are not visible while accessing that computer from our Win CE device. Windows XP or Win 7 users can browse shared folders but not WinCE device.Media Streaming, Network discovery, File sharing is Off. Firewall is turn off.
A week ago I had to reinstall Windows 7 on a second PC (PC2) which now has an SSD. However, the original disk (a 500GB Seagate) has been used to reorganise partitions of which there are now eight. Three of these I can access from PC1 with no problem. However, the last four plus a 1TB drive there is no way I can access them - I can look at them but there's no way I can copy any files or folders to them.I've checked the drive permissions via the Security tab and set everything I can to Full Control. However, out of the five there is one Name I cannot change and that is CREATOR OWNER which has permissions set to Special and which so far I've found no way of changing. In relation to the Names they are a little different to mine. All five are the same except that PC2 has CREATOR OWNER. I have Authenticated Users that PC2 doesn't have; none of PC2's drives have an Authenticated Users entry. Should it?
To clarify the Names we both have they are listed below:
PC1 Administrators (Username/Administrator) Authenticated Users Everyone SYSTEM
[code].....
I've just checked a third PC we have upstairs and that is different again most drives ONLY having Everyone with only one drive having the Names above under PC1 but NOT Everyone. So I suppose that makes me one confused chick. What the hell gives with the Names Groups? What should I have and what should I NOT have or not need?
XP SP3 is used. The Simple File Sharing is not enable.Ping from Windows 7 to XP goes through.The same log-on user name and password are used for XP and Windows 7.XP machine is visible from Windows 7.Error message is "Unknown user name or bad password. The same message when attempting to access from another Windows 7.Initially it was working but after an hour or so, it quits. I rebooted the router, XP machine and Windows 7 machine but the situation remains unchanged. There is no problem networking between the two W7s.
I have just created a VHD on my laptop so I can share is as a shared area as I have over 5 computers in my house. I want the whole household to have access to the drive but not to a folder that i own as it contains private stuff. How would I go about protecting a folder from being accessed without the correct password and username. Or maybe, how would i go about stopping the folder from being accessed from the whole network but being able to access it on the local machine?
I install a printer on windows 7 desktop and shared it so my laptop can print to the printer, but when i tried to install it on my laptop i get the error message "Operation could not be completed (error 0x00000709) Double check the printer name and make sure that the printer is connected to the network." The printer is in fact installed and it is possible to print a test print, just not set the default printer.i can not set it as default either even after changing the printer from USB to TCP/IP
have shared a printer on Windows 7 and in the security tab I gave "Everyone" access rights. I still get the error message - I keep getting the error messageWindows cannot connect to the printer. I was able to shared directories and able to access them without any problems. It's the darn printer that I can't connect. It's part of my assignment to test the printer to see if I can install the driver via point and print to a shared printer on Windows 7. Someone told me it's a Windows 7 security issue. On both another Windows XP and another Windows 7 PC able to to connect to a second Windows 7 PC and see the printer, but it won't let me connect to it. Any ideas how to resolve it. Is it because one pc is on a domain while the other is in a workgroup? If so why am I able to access shared folder, but cannot connect to a shared printer.
I tried doing a lot of searching on here and google, but didn't find a resolution. I have a Machine with Windows 7 Alienware x86 hosting a shared network printer. I am able to find and print on a machine with Windows 7 Home Premium x64 with no problem. Both machines belong to the x64 Homegroup. I have a netbook with Windows 7 Starter and find the printer on the network and even try adding it with \hostnameprintername. I find it no problem and drivers install on the netbook, but when I try to print it does nothing. Works great on the other two machines. I also joined the homegroup to see if that will work, but it didn't.
I have a 2 computers connected using a Cisco router and ethernet cables. one of them has a printer connected via USB and this printer is sharerd. Both of them running Win 7 Professional 32-bit OS. I can connect to the shared printer from the 2nd machine, but after a restart, the same printer appears offline.I have to go to My Network Places, click on the 1st PC's icon and then right-click the printer and click Connect. This re-establishes the connection.Though this method serves my purpose, I want to get to the bottom of this. Why does the printer show offline each time I restart?
I've got two Vista Ultimate computers. Both have the same username and password. Same workgroup name.
Password protected sharing is enabled on both. I shared a folder on computer 1, and added Everyone to the security tab, with full control.
When i try to map the folder from computer 2, I can see computer 1 listed. But when I click on the + next to it, it asks for a username and password (which I did not expect to be necessary since they are both the same user account and password) and when I enter it it says Logon Unsuccessful.
I have a Maxtor External Hard drive and Windows 7 Premium 64 bit. I have a user setup for each member of my family on the computer. The maxtor drive was working fine uptil I decided that I wanted only myself to be able to access it only. The drive appeared as my K drive. I went to sharing and added myself as read/write access and removed the everyone share thinking that only I would be able to use the drive. I restarted my PC and now nobody can access it. When I plug the drive into the usb slot the drive whirs up as normal but there is no drive letter for it and it does not appear in device manager etc. I plugged it into my old XP machine and that cannot read it either..
I'm using Windows 7 Home Premium 64bit and it's on a network with a Techgear MB902 PVR. I used to be able to watch movies in my Windows 7 shared folders on my TV via the MB902 but after I bought a new PC and installed Windows 7 I've had problems accessing the Windows 7 shared folders.
When I connect to my PC it asks for a login and password, and none of my pc or network passwords work. Strangely enough, when I restart Windows 7 the problem goes away and I can login successfully without a password, but then later the same day or the next day the login/password problem has returned.
I've trawled the internet looking for solutions, and tried all of the plausible looking ones, editing the registry, unsharing and then resharing. They all seem to work but then I realise that it's the reboot that works and not the fixes because the problem returns.
The MB902 has a hard drive and I can access the files on that from my PC with no issues it's just going the other way that I have problems.
I'm trying to access a shared folder on my windows xp machine. i went to map network drive, use different credentials, and typed in the account name and password that i had given rights to on the other computer. but it just reprompted for different credentials.as a temporary fix i created a user on this computer with the exact same credentials as the ones i typed in, and it works for that user. so apparently the computer didnt understand what i typed in for 'use different credentials'?
Printer (HP Officejet 6200) is wired to Vista Home Basic (2007 w/ SP2), printer sharing enabled via Netgear router. Laptop-1 (Win 7 Home Premium, 2009, w/SP1) and Laptop-2 (Vista Home Premium, 2007, w/ SP2) "see" printer via network. When I print anything Print Manager instantly reports "Error Printing". I am clueless as to troubleshoot.Have run Printer Troubleshoot app.
i have been running windows 7 rc1 for a while now, I have a HP laserjet 1018 installed as a shared printer on a windows xp machine. From windows 7 rc1 I send jobs to this printer no problem. However, on my new retail version of windows 7 professional 32 bit the printer does not respond to print jobs. The document sits in the que for a few seconds then it just disappears.
so i'm having an issue trying to connect to the shared printer on one of my windows 7 x64 machines.i've tried setting the network on windows 7 to "work network" instead of "home network" thinking that the workgroup being the same on all systems will do the trick but it doesn't.
