I am currently running WinXP Pro SP3. If I was to install Win7 on a separate partition, would I be able to use Win Virtual PC to control the existing XP partition or would I need to re-install all the XP software onto the virtual machine?
View 9 RepliesI had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies View RelatedI have just loaded win7 pro 64 bit onto a 2nd hdd, preserving xp on another hdd. I have installed virtual pc and xp mode in win7. For all you OS geeks, how do I point my virtual pc xp mode to the installed xp on another hdd, so I don't have to reinstall any of my existing xp software?
View 2 Replies View RelatedMy Windows 7 Pro x64 has twice had to be completely reinstalled after serious faults.Each time before the crash Virtual XP had been installed and had created its own VHD.Both VHDs have been preserved, but the Virtual machine(s) have apparently isappeared. On each Windows 7 reinstallation, the important folders from the previous version were saved in a Windows.Old folder. I now want to reinstall VirtualXP and choose one of the old VHDs rather than create yet another one. What is the easiest and fastest way to do that?
View 3 Replies View RelatedI install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies View RelatedI've tried installing the OS two times, both times my video card has not been recognized. It was properly recognized in the following builds: 7000, 7048, 7057, 7068, 7077. I've tried using ATi Catalyst and also used the following process suggested on techPowerUp! Forums - Powered by vBulletin with no luck:
1, Uninstall existing drivers through Control Panel, reboot in safe mode and run Driver Sweeper to clean up, then:
2, Go here and download the 61.1mb package
3, Go here and download Mobility Modder the install it
4, Go here to download the update, and extract the file into the Mod Tool Directory, overwriting the previous file
5, Run the ATI driver package you downloaded earlier, then cancel after it has been extracted (when you see a black window with orange buttons)
6, Run the Mobility Modder, pointing to the driver folder e.g: C:ATISupport 9_3_vista 64_win7_64_dd_ccc_wdm_enu
7, When complete, close mobility modder, navigate yourself to the above folder and run setup.exe
8, Go to C:ATISupport9_3_vista64_win7_64_dd_ccc_wdm_enu DriverPackagesDriversDisplay LH6A_INF
9, At the end it will most likely fail, however, before rebooting, go to device manager, right click and and click update driver, click browse my computer for software, then click browse and point to:C:ATISupport9_ 3_vista64_win7_64_dd_ccc_wdm_enuDriverPackages DriversDisplayLH6A_INF
10, Click next and it should install the driver. Reboot and all should be okay!
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedA friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies View RelatedI just brought home a new system with Windows 7 installed. Can I partition the hard drive without corrupting the OS ?
View 7 Replies View RelatedI have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I just got a new MB/CPU and want to do a clean install of my OS. Currently I have two partitions on my HD, one for the OS and one for all my data. Can I just format the OS partition and do a clean install on that partition of the new OS? I just don't want to lose all my data files. I have most backed up, but would take the entire day to backup the rest probably.
View 2 Replies View RelatedI'm trying to install Windows 7 on an HP DV6-1253cl notebook from a USB flash drive and running into problems that are preventing the install. (Note: It's not the rig that is in my system specs.)
When I try and clean install Windows 7 64-bit over the existing Vista system partition (C), I get the following error.
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
Thing is, setup shows that partition as well as the HP recovery partition and an external USB drive that is also connected to this notebook and offers all of those as choices for installing Windows 7 onto.
Can anyone help me figure out why Windows 7 won't install on the existing Vista C partition and tell me how to get it to install?
My driver are combined into one drive. I install my os too. I need a tool to partition that drive.
View 3 Replies View RelatedRecently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies View RelatedSo I used to have vista, xp, and mac on my pc. After a while xp screwed up and left me with only vista and mac. My school handed out a bunch of software including windows 7. I saved the installer and key on my desktop and pretty much just left it there for two months. Eventually my vista crashed and could have only used mac. After a very short while my mac crashed to. I saved my key on a piece of paper but unfortunately I lost the installer.
This morning I found a iso, burnt it on another computer and popped it in. Everything was fine until I was asked where I want windows to be installed. Due to the fact that I tried to fix vista from dos, my hard drive configuration got messed up. Regardless of that I didn't care because everything was backed up on a external so I tried to format all of my hard drives and then instal windows. "Setup was unable to create a new system partition or locate an existing system partition." What am I supposed to do?
I once read that someone used an XP disc to create the system partition for a Vista or 7 install. The reason being that the Vista/7 system partitions are larger than the ones XP creates.
Anyone know of this technique and if it is safe? By safe I mean 7 would run stable and reliably from a smaller system partition.
Or are there other techniques (maybe a disk partitioner) that would do the trick. I hate to see so much space "seemingly" wasted.
Last night after 8 hours of toil, I finally completed a clean install using a usb drive on my asus ux32vd using the brand new SSD drive I had just bought. The reason it took so long was I kept getting this error -> "Setup was unable to create a new system partition or locate an existing system partition." What I did to finally get it to install was get to the c prompt during the installation and run diskpart and make the integrated 32GB SSD 'offline' and then I selected the SSD and used the 'clean' command and left the SSD unpartitioned and raw. I had read that with SSDs on a clean install you should leave it raw and windows will install on it. And it worked. Now here's problem number 2, which feels worse than problem number 1. After installing everything went swimmingly. I started updating drivers, etc. I got to the point where I needed to do a Windows Update. There were 91 things that needed to be updated/installed. So I ran update with all 91 and that went fine until it went to restart - it wouldn't boot into windows. Instead it kept going into that startup restoration program over and over saying it couldn't fix the problem. I tried to delete the updates manually through cprompt by running dism, but this failed and I figured to hell with the hassle I'll just reinstall Windows since I know how now and then update windows one update at a time. BIG MISTAKE. I tried doing EXACTLY what I had done before - doing diskpart, offlining the integrated SSD, etc - however this time the error isn't going away. It's still saying "Setup was unable to create a new system partition or locate an existing system partition." I don't get it. I'm doing exactly what I did when I got it to work, but it's not working now. I can only surmise that the system is still recognizing the integrated SSD somehow.
View 9 Replies View RelatedI am having a problem with installing Windows 7 on my netbook (Novero Solana). I did a clean install (wiped out Windows 8) and when using a USB boot install of Windows 7, I encountered the following error (Disk 0 Unallocated Space): "Windows 7 install Error "Setup was unable to use existing system partition because it does not contain the required free space". The other partition on my netbook is System Reserved (Disk 0 Partition 1: System Reserved), but I don't want to touch it, as I have heard it contains important files e.g. bootup. Attached is the screenshot of the "Install Windows" screen displaying the partitions.
View 2 Replies View RelatedI upgraded to Windows 7, but I have a few software I installed on Virtual PC 2007 before. I use XP mode but can't find a way to use the virtual HD created with Virtual PC 2007. Is there a way to convert the virtual HD so that XP mode can recognize?
View 1 Replies View RelatedHow to Change Virtual Machine Settings in Windows Virtual PC ?
View 0 Replies View RelatedHow to Delete a Virtual Machine Created with Windows Virtual PC ?
View 0 Replies View RelatedHow to Boot from a CD or DVD in a Windows Virtual PC ?
View 0 Replies View RelatedHow to Create a Virtual Machine in Windows Virtual PC ?
View 0 Replies View RelatedGot a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
I am trying to set my monitor's screen give accurate renditions of my pictures. I use Quick Gamma to set gamma. When doing this I can use either Nvidia's controls or windows controls (right click desktop>Nvidia Control Panel. When using Nvidia's Control Panel, there are two choices: Use other applications control color settings or Use Nvidia settings. Am I correct in assuming that the former setting is Windows? I always check the button to use Nvidia settings (and then Apply>OK), but when I go back to this screen at a later time, the Other applications control color settings is always selected. I'd like to default to Nvidia.
View 3 Replies View RelatedWhen I go to Control PanelAll Control Panel ItemsNotification Area Icons dialog then there are a lot of programs which are already uninstalled.
How can I cleanup/delete all these useless entries? How can I delete ONE single entry manually?
Second question: Assume I want to hide icons and notification for mutiple/all entries (here approx 40 items) in ONE STEP.
Third question: How can I save/backup the current notification settings (for later restore) into a file? Are these notifcation settings stored in a certain branch of the Registry (which exactly) ?
Have main computer win 7 and works fine with virgin hub. Have aquired second computer running xp pro and won't set up with hub. Keeps trying dial up and failing to recognise connection to hub.
View 4 Replies View Relatedi am re-installing WIN-7 on a previously installed WIN-7 (the same OS). But the prob is that, i had installed it with XP already loaded. Now that i want to re install WIN-7,
1. will it affect XP
2.Should i reinstall XP??
3. I want XP to be as it is..
I recently bought a canon 7D which works perfectly with my laptop, however my existing G6 will not work with windows7 no matter what i download. I have downloaded updates to software and the latest codec but to no avail.
View 1 Replies View RelatedI have a friend who has spyware on their computer. It's a Vista machine that's so far gone that the only option would be to wipe it (unless someone else has a better solution).
But I have a copy of Win7 Pro from Newegg that's been used already for a computer build I did.
But, could I use this disk alongside a student license code for Win7 Pro?
i cant seem to find a thread that will tell me so, but i currently have win 7 64bit which is my main system, but also its partioned with xp, what i need to do is reinstal windows 7 again but dont want to loose my xp. do i have to delete windows 7 first before instaling, its time my pc had a good clear up.
View 2 Replies View Related