I had mt boot drive fail and replaced it with a drive of the same size, tried to use the disk image I created 2 months ago to recover my boot drive with and all I get is an error telling me there are no drives that it can use (not the exact msg.) to restore to. so it seems to be a useless feature if it won't work.
View 3 RepliesIs there any way to take a disk image within Windows 7 or do I need to buy disk imaging software like Acronis?
View 9 Replies View RelatedIs the back up and system image programs on Windows 7 good and trustworthy?
View 1 Replies View RelatedI periodically create a disk image of a RAID 1 Volume consisting of two 500 GB SATA drive containing my Windows 7 system and data, and a RAID 0 Volume consisting of of three 320 GB SATA drives containing my Windows Vista. I tried to do a recovery from the disk image, but my VISTA volume does not restore. Is there anyway to restore both volumes? The recovery indicates the both volumes are to be restored, both only the Windows 7 volume is restored.
View 7 Replies View RelatedI have a compac (HP) laptop (CQ61-41us notebook), running WIN7 home premium, 64 bit. Aside from the normal file backup via the western digital software, I have several windows 7 generated iso images of my laptop stored on my external WD drive. Using windows repair disk, my computer does not recognize the external drive to access the disk images. It just asks to insert the last disk into optical drive. My images are on a folder on my external drive. There is no option to navigate to it! This is the first time I've needed to restore an image, and I can't access them! This should be an easy operation that could be started in a few minutes. I have been screwing around with this for more than 24 hours!
View 3 Replies View RelatedI don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601)
Motherboard: Gigabyte GA-MA78LMT-S2
CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010
SSD:Microcenter SSD G2 series 64GB ATA Device
HDD:Hitachi HDS721010CLA332 ATA Device (1TB)
RAM:8GB
I have been using build 7229, and it has been absolutly brilliant.
Now, apart from that, i have had general probs, one of which forced me to reinstall everything (Kaspersky 6.0 does not work properly with win 7, well i did'nt with me, had a BSOD when i rebooted, one of which explained a process that had been terminated, process that the CPU runs, anyway the HDD is formatted and i restarted again), this has now forced me to make a disk image incase something happens.
No what i wanna know is, can i use that disk image or a back-up and flash that onto an RTM version (when there released), so's i don't have to reinstall everything. i.e. the back-up or disk image does it all for me. Or is this not possible.
How to copy my laptop win7 hdd to a ssd which can later be used as boot device for this laptop
View 1 Replies View Relatedif i buy a new version of windows 7 and upload it to my computer....can i then use my disk image from the previous system ?
View 10 Replies View RelatedI made a backup image a couple of weeks ago using Paragon Backup & Recovery ,but since that time I have deleted about 80GB of files.
I don't want those files put back on my C drive if I need to do a restore from image.So I want to start fresh with a clean image and then do my scheduled differential back ups.
I can't remember how to wipe the info off the ext.Can't find an answer in the Paragon program.
Any suggestions?
I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
View 2 Replies View RelatedI periodically create a system image using an external hdd and a dvd.
I've run out of dvd's and have only got some cd-r's of 750Mb
my Windows-7 system is dead. Will not boot, and recovery options from previously made recovery disk have been unsuccessful. I do have a recent Windows-created System Image on a USB-Network drive, however all attempts at utilizing such have been unsuccessful. After navigating to the System Image Restore function from either my repair CD, or my OEM Windows CD, then selecting Search for image on the network function, then entering the full network address [\readyshareusb_storagelarrydelldesktopbackupwindowsimagebackupdell_desktopackup 2012-11-18 170013], then entering my network credentials, the system seems to search the location, but returns me to a blank "select the location of the backup you want to restore" screen.
Related problem... thinking the C-drive was toast, and knowing I have an OEM Windows-7 CD, I bought a new 3-TB drive. Installed the drive, attempted to do a clean-fresh system install on the new drive, and Win-7 tells me it can not install windows because of some hardware incompatibility issue. Since nothing was changed from the previously working Win-7 installation on this system, except the new 3TB hard drive..
I can either go with the backup system image, or clean install of Win-7 to the new drive to get me back up an running. I would actually prefer to install the backup image to the NEW drive, if possible.
How to change image of local disk icon
View 1 Replies View RelatedI am wondering if it is possible to restore a backup disk image taken from a laptop running Windows 7 32-bit to a different laptop running Windows 7 64-bit and I haven't been able to find anything about this. Does anyone know if this is possible? The machine that I need to backup is a Dell XPS M1330 (upgraded to W7 32-bit), and the machine that I would be restoring the image to is a Dell Latitude E5430 (brand new, running W7 64-bit). I found a program called EaseUS Todo Backup, and purchasing the "Workstation" or higher version would include support for a "Restore to dissimilar hardware" feature.
View 7 Replies View Relatedwhen I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
View 10 Replies View RelatedI have a hp dv 9700 laptop that has crash, I have being experiences a few problems recently and have manage to fix it my self when it crash before with system repair disk that I brought of the internet. The following message keep on coming up when booting A Disk Read Error Occurred. I think I might of mess the laptop up buy setting the setting as default throw bios, I am looking for free software that I can download on a disk or usb and then reformat it or try to repair it via a system repair disk, I am aware there are software that you have buy over the net, but I believe in doing the job yourself free.
View 2 Replies View RelatedHow to Extract Windows 7 System Image Files Using Disk Management ?
View 0 Replies View RelatedComputer management -> Disk management -> attach VHD The VHD attaches fine, and it is the correct file. But when it attaches I get the message: "you need to format the disk in drive F: before you can use it. Do you want to format it?" I clicked cancel, and then tried to right click -> explore. I then got the message: "F: is not accessible. The file or directory is corrupted and unreadable."Out of all the tutorials I have read, the file should open just fine and let me explore it. Why is it asking me to format the disk? And is it safe to do so?The file system is listed as "RAW" and the status is "Healthy(primary partition)"I don't want to lose everything on the system image! Can I/should I format the disk?
View 2 Replies View RelatedThis isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
View 5 Replies View RelatedI have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
I have a workstation on a gaming rig. I work and play games on it. I wanted to ask if I could separate my work files and GAMES setups (installed files) so they don't harm my work data.I do play games with cheats/hacks and they mostly contain malicious files which can damage my operating system. I want to create a seperate DISK image like Vmware in which I can run games without being worried about any harmful files accessing my work partition.
View 5 Replies View RelatedTomorrow my new Samsung netbook will be delivered, Windows 7 Starter is preinstalled. I haven't had a netbook before, and I haven't used Windows 7 before.
I'd like to make an image of the HDD immediately after unpacking. I need to play around with Windows 7 and I probably want to remove bloatware. I may even want to install Ubuntu Netbook Edition. But in any case, I'd like to able to restore the original, clean HDD image.
What would be the best strategy to do this? Make an image (using eg. Partition Image) before even starting up Windows 7? Make an image after running Windows 7 once (perhaps it needs to register / validate / activate)? I do not want to get into trouble with multiple activation.
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
View 7 Replies View RelatedUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View Relatedif i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?
hope that makes sense
also can you update images or would you need to create new ones to keep them upto date?
now am using win7 hme basic, can u tel me vch software is helpful 2 chage 2d image to 3d image
View 2 Replies View Relatedso i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View Relatedwindows 7 disk boot failure insert system disk and press enter
View 1 Replies View Related