Can Use Disk Image On A Different Computer?
Nov 20, 2012if i buy a new version of windows 7 and upload it to my computer....can i then use my disk image from the previous system ?
View 10 Replies
ADVERTISEMENT
Way To Take A Disk Image Within Windows 7?
Oct 2, 2011Is there any way to take a disk image within Windows 7 or do I need to buy disk imaging software like Acronis?
View 9 Replies View RelatedDisk Image Flash
Jul 20, 2009I have been using build 7229, and it has been absolutly brilliant.
Now, apart from that, i have had general probs, one of which forced me to reinstall everything (Kaspersky 6.0 does not work properly with win 7, well i did'nt with me, had a BSOD when i rebooted, one of which explained a process that had been terminated, process that the CPU runs, anyway the HDD is formatted and i restarted again), this has now forced me to make a disk image incase something happens.
No what i wanna know is, can i use that disk image or a back-up and flash that onto an RTM version (when there released), so's i don't have to reinstall everything. i.e. the back-up or disk image does it all for me. Or is this not possible.
Transferring Whole Disk Image From HDD To SSD?
Jan 29, 2012How to copy my laptop win7 hdd to a ssd which can later be used as boot device for this laptop
View 1 Replies View RelatedWindows Disk Image Uesless
Jul 7, 2012I had mt boot drive fail and replaced it with a drive of the same size, tried to use the disk image I created 2 months ago to recover my boot drive with and all I get is an error telling me there are no drives that it can use (not the exact msg.) to restore to. so it seems to be a useless feature if it won't work.
View 3 Replies View RelatedDelete Backup Disk Image On Ext.HDD
Dec 1, 2009I made a backup image a couple of weeks ago using Paragon Backup & Recovery ,but since that time I have deleted about 80GB of files.
I don't want those files put back on my C drive if I need to do a restore from image.So I want to start fresh with a clean image and then do my scheduled differential back ups.
I can't remember how to wipe the info off the ext.Can't find an answer in the Paragon program.
Any suggestions?
System Image Recovery Disk On New SSD?
May 9, 2012I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
View 2 Replies View RelatedWindows 7 Disk Image And Back Up
Jan 2, 2013Is the back up and system image programs on Windows 7 good and trustworthy?
View 1 Replies View RelatedSystem Image Repair Disk - Min CD-R Capacity Mb?
Dec 13, 2011I periodically create a system image using an external hdd and a dvd.
I've run out of dvd's and have only got some cd-r's of 750Mb
Recovery Disk Cannot See Image On Network Drive
Dec 19, 2012my Windows-7 system is dead. Will not boot, and recovery options from previously made recovery disk have been unsuccessful. I do have a recent Windows-created System Image on a USB-Network drive, however all attempts at utilizing such have been unsuccessful. After navigating to the System Image Restore function from either my repair CD, or my OEM Windows CD, then selecting Search for image on the network function, then entering the full network address [\readyshareusb_storagelarrydelldesktopbackupwindowsimagebackupdell_desktopackup 2012-11-18 170013], then entering my network credentials, the system seems to search the location, but returns me to a blank "select the location of the backup you want to restore" screen.
Related problem... thinking the C-drive was toast, and knowing I have an OEM Windows-7 CD, I bought a new 3-TB drive. Installed the drive, attempted to do a clean-fresh system install on the new drive, and Win-7 tells me it can not install windows because of some hardware incompatibility issue. Since nothing was changed from the previously working Win-7 installation on this system, except the new 3TB hard drive..
I can either go with the backup system image, or clean install of Win-7 to the new drive to get me back up an running. I would actually prefer to install the backup image to the NEW drive, if possible.
How To Change Image Of Local Disk Icon
May 25, 2012How to change image of local disk icon
View 1 Replies View RelatedSetup A Computer On Vmware And Then Make An Image Of The Vm And Put It On A Physical Computer?
Aug 26, 2011Is there any way to setup a computer on vmware and then make an image of the vm and put it on a physical computer (multiple computers if possible)?
View 5 Replies View RelatedSystem Rebooting Durning Backup Or Disk Image
Oct 16, 2011when I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
View 10 Replies View RelatedReformat Crashed Laptop Without System Image Disk
Jan 20, 2013I have a hp dv 9700 laptop that has crash, I have being experiences a few problems recently and have manage to fix it my self when it crash before with system repair disk that I brought of the internet. The following message keep on coming up when booting A Disk Read Error Occurred. I think I might of mess the laptop up buy setting the setting as default throw bios, I am looking for free software that I can download on a disk or usb and then reformat it or try to repair it via a system repair disk, I am aware there are software that you have buy over the net, but I believe in doing the job yourself free.
View 2 Replies View RelatedSystem Image - Extract Files Using Disk Management
Sep 14, 2009How to Extract Windows 7 System Image Files Using Disk Management ?
View 0 Replies View RelatedRecovery Using Disk Image - Only Windows 7 Volume Restored
Sep 8, 2011I periodically create a disk image of a RAID 1 Volume consisting of two 500 GB SATA drive containing my Windows 7 system and data, and a RAID 0 Volume consisting of of three 320 GB SATA drives containing my Windows Vista. I tried to do a recovery from the disk image, but my VISTA volume does not restore. Is there anyway to restore both volumes? The recovery indicates the both volumes are to be restored, both only the Windows 7 volume is restored.
View 7 Replies View RelatedExtracting Files From System Image. Format Disk?
Jun 17, 2012Computer management -> Disk management -> attach VHD The VHD attaches fine, and it is the correct file. But when it attaches I get the message: "you need to format the disk in drive F: before you can use it. Do you want to format it?" I clicked cancel, and then tried to right click -> explore. I then got the message: "F: is not accessible. The file or directory is corrupted and unreadable."Out of all the tutorials I have read, the file should open just fine and let me explore it. Why is it asking me to format the disk? And is it safe to do so?The file system is listed as "RAW" and the status is "Healthy(primary partition)"I don't want to lose everything on the system image! Can I/should I format the disk?
View 2 Replies View RelatedHow To Store A Computer System Image File On Another Computer
Mar 27, 2012I m having 2 laptops at home, I want to create system image file of laptop1 onto laptop2. Since the data is large i cant take the hassle of creating sytem image on a DVD as it will require more DVD's to do it. So m planning to store it on Laptop2. I m thinking of connecting 2 Laptops with a LAN cable and then create the sytem image on other laptop.
View 4 Replies View RelatedTrying To Restore Windows 7 Disk Image Stored On WD Passport Drive
Sep 24, 2012I have a compac (HP) laptop (CQ61-41us notebook), running WIN7 home premium, 64 bit. Aside from the normal file backup via the western digital software, I have several windows 7 generated iso images of my laptop stored on my external WD drive. Using windows repair disk, my computer does not recognize the external drive to access the disk images. It just asks to insert the last disk into optical drive. My images are on a folder on my external drive. There is no option to navigate to it! This is the first time I've needed to restore an image, and I can't access them! This should be an easy operation that could be started in a few minutes. I have been screwing around with this for more than 24 hours!
View 3 Replies View RelatedCreate System Image Won't Detect External Hard Disk?
Feb 27, 2012This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
View 5 Replies View RelatedSystem Image File Error - No Disk For Recovery Can Be Found
Nov 24, 2012I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
Creating A Separate Disk Image Partition For Running Unwanted Programs?
Sep 5, 2012I have a workstation on a gaming rig. I work and play games on it. I wanted to ask if I could separate my work files and GAMES setups (installed files) so they don't harm my work data.I do play games with cheats/hacks and they mostly contain malicious files which can damage my operating system. I want to create a seperate DISK image like Vmware in which I can run games without being worried about any harmful files accessing my work partition.
View 5 Replies View RelatedCan't Image: Windows 7 SSD System Freezes, Loses Disk Access, Reboots
Jan 24, 2012I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601)
Motherboard: Gigabyte GA-MA78LMT-S2
CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010
SSD:Microcenter SSD G2 series 64GB ATA Device
HDD:Hitachi HDS721010CLA332 ATA Device (1TB)
RAM:8GB
Does Repair Disk Include All Software On The Computer At Time Disk Was Made
May 31, 2012After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
View 1 Replies View RelatedReplace Disk 1 With Disk 0 In Computer Management?
May 18, 2010Its a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA)
(2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
How To Image A Windows 7 Computer
Jan 16, 2013I looked and could not find a proper place to ask this, but I just built a new computer (Upgraded the HDD's) and added ram, spend 3 days loading all the software, drivers, etc and I really don't want to go through all that again except for minor updates later on.I heard about Norton Ghost, Ultra ISO, Power ISO, etc and want to know what people recommend for creating a HDD image of my hard drives as they are now so I can boot the computer say a year from now, press a few keys and have it write a clean working image to the the hardrive if I have some sort of catastrophic failure.
View 9 Replies View RelatedWindows 7 Image Won't Boot Up On Different Computer
Sep 28, 2011I had a system with programs I have installed and the setup and imaged it with acronis or for any matter, it could have been a perfect clone drive copy because the program isnt the issue. My i5 - 2500k achi windows 7 was imaged to a new hard drive and attempted to run on a AMD Phenom 4x 9500.Now before you go telling me about the three hard drive modes, Raid , IDE and ACHI. I've edited the registry and have tested all three modes to correspond with the motherboard bios setting of the drive. I assume its IDE or ACHI, which I've tried loading windows on the orginal machine, editing the registry settings, then trying it again on another machine.Where I am at now is it goes to classpnp.sys when im watching safe mode and stalls there. Im noticing before it was stalling at disk.sys but i think i fixed that via the registry settings for the hard drive mode.Tried to make a generalized image by using sysprep got the error fatal error because i guess its used more than three times, dont understand what disarm command they are talking about for workaround since the xml file doesnt exist.
I have tried ACRONIS 2011 Image with Universal Settings mode (that is supposed to remove hard ware specific settings)I have also tried using the windows disc, going into launchup repair, repair startup.I also went recovery console, then tried renaming classpnp.sys to classpnp.old.I tried several options using the Ultimate Boot disk but its not the boot up mbr as it boots up , its the loading of one of the system files/drivers that make it fail.The reason why im trying to just clone one hard drive and put it on another system is because, everything is installed, the programs, etc. Its saving me god bloody 2 days with setting up the programs, although Im getting close to over a day trying to figure out whats the big dela with getting this to work on another computer.additional information : I do not need any user specific preferences, documents, files or settings, everything can go, i just want this installation with about 25 gig of programs, to load and work.If you know of a program thats fairly easy to use considering im already one day into doing this, then let me know and tell me what im looking to do and some instructions are great.Either way, im waiting for an answer, will be here next 3 hours.im on skype as well, this user name is spelt backwards for security reasons.
Deploying Windows 7 X64 To Different Computer From Image File?
Mar 16, 2011I have a new computer and a backup computer, different hardware (the particular kinds being irrelevant). I also have two Win7 licenses. At each backup I would like to save an image file from the new (primary) computer, restore it to the older one (which I know works with Win7x64), and tweak anything needing tweaking to be able to boot to the old computer under the second license. This saves me the work both of performing sysadmin on the old computer and of backing up the old computer.
View 3 Replies View RelatedCan BLANK Computer Be Reinstalled (OS) With System Image
Aug 9, 2011By "blank" I mean an empty laptop hard drive. I'm going to have my hard drive replaced, so I believe the new hard drive won't have an operating system installed on it. So if I create a system image and store it in an external HDD, will I be able to reinstall the OS simply py plugging the external HDD into the laptop ?
View 2 Replies View RelatedSystem Image Created Using EFI And Computer Is Using BIOS
Nov 2, 2012Trying to restore a Windows 7 image after a boot manager problem. Rampage IV Formula MB with no hardware or BIOS changes since the creation of the image 9 days ago, but get the following error message.
"The system image restore failed. Windows cannot restore a system image to a computer that has different firmware. The system image was created on a Computer using EFI and this computer is using BIOS."
I thought this MB used EFI.
Cannot Create A System Image Or Backup Computer
Nov 15, 2009I have tried every trick in the book to creat a system image whether directly or via backup computer. I am receiving those error messages; 0x8078011D when I try to create a System Image from the left bar and; 0x81000032 when using backup computer.
View 5 Replies View Related