I looked and could not find a proper place to ask this, but I just built a new computer (Upgraded the HDD's) and added ram, spend 3 days loading all the software, drivers, etc and I really don't want to go through all that again except for minor updates later on.I heard about Norton Ghost, Ultra ISO, Power ISO, etc and want to know what people recommend for creating a HDD image of my hard drives as they are now so I can boot the computer say a year from now, press a few keys and have it write a clean working image to the the hardrive if I have some sort of catastrophic failure.
I m having 2 laptops at home, I want to create system image file of laptop1 onto laptop2. Since the data is large i cant take the hassle of creating sytem image on a DVD as it will require more DVD's to do it. So m planning to store it on Laptop2. I m thinking of connecting 2 Laptops with a LAN cable and then create the sytem image on other laptop.
I had a system with programs I have installed and the setup and imaged it with acronis or for any matter, it could have been a perfect clone drive copy because the program isnt the issue. My i5 - 2500k achi windows 7 was imaged to a new hard drive and attempted to run on a AMD Phenom 4x 9500.Now before you go telling me about the three hard drive modes, Raid , IDE and ACHI. I've edited the registry and have tested all three modes to correspond with the motherboard bios setting of the drive. I assume its IDE or ACHI, which I've tried loading windows on the orginal machine, editing the registry settings, then trying it again on another machine.Where I am at now is it goes to classpnp.sys when im watching safe mode and stalls there. Im noticing before it was stalling at disk.sys but i think i fixed that via the registry settings for the hard drive mode.Tried to make a generalized image by using sysprep got the error fatal error because i guess its used more than three times, dont understand what disarm command they are talking about for workaround since the xml file doesnt exist.
I have tried ACRONIS 2011 Image with Universal Settings mode (that is supposed to remove hard ware specific settings)I have also tried using the windows disc, going into launchup repair, repair startup.I also went recovery console, then tried renaming classpnp.sys to classpnp.old.I tried several options using the Ultimate Boot disk but its not the boot up mbr as it boots up , its the loading of one of the system files/drivers that make it fail.The reason why im trying to just clone one hard drive and put it on another system is because, everything is installed, the programs, etc. Its saving me god bloody 2 days with setting up the programs, although Im getting close to over a day trying to figure out whats the big dela with getting this to work on another computer.additional information : I do not need any user specific preferences, documents, files or settings, everything can go, i just want this installation with about 25 gig of programs, to load and work.If you know of a program thats fairly easy to use considering im already one day into doing this, then let me know and tell me what im looking to do and some instructions are great.Either way, im waiting for an answer, will be here next 3 hours.im on skype as well, this user name is spelt backwards for security reasons.
I have a new computer and a backup computer, different hardware (the particular kinds being irrelevant). I also have two Win7 licenses. At each backup I would like to save an image file from the new (primary) computer, restore it to the older one (which I know works with Win7x64), and tweak anything needing tweaking to be able to boot to the old computer under the second license. This saves me the work both of performing sysadmin on the old computer and of backing up the old computer.
I had a Sony laptop that originally had Vista and was upgraded to Windows 7. I recently got a new Lenovo laptop and purchased brand new application software so I could get a clean installation. After 1 month of running both systems and gradually moving material over to the Lenovo, I cleaned the Sony and did a recovery to the original, store bought condition. Now I realize that I failed to move over some pictures. I have a Windows Image of the Sony on an external hard drive. Is there a way I can get the pics from the Windows Image onto the new Lenovo?
By "blank" I mean an empty laptop hard drive. I'm going to have my hard drive replaced, so I believe the new hard drive won't have an operating system installed on it. So if I create a system image and store it in an external HDD, will I be able to reinstall the OS simply py plugging the external HDD into the laptop ?
Trying to restore a Windows 7 image after a boot manager problem. Rampage IV Formula MB with no hardware or BIOS changes since the creation of the image 9 days ago, but get the following error message.
"The system image restore failed. Windows cannot restore a system image to a computer that has different firmware. The system image was created on a Computer using EFI and this computer is using BIOS."
I have tried every trick in the book to creat a system image whether directly or via backup computer. I am receiving those error messages; 0x8078011D when I try to create a System Image from the left bar and; 0x81000032 when using backup computer.
I'm currently developing a new SOE from scratch for the company I currently work for as my first real project I have a few concerns surrounding what should be included and what can actually be achived.When I create the image from PC1 does it copy absolutly everything EG: Computer settings and Product keys? The reason why I ask is if it copies the product key aswell we could be in some serious trouble with the auditors.Branching off from my last question, is there anyway to assign a computer name and issue the pc a domain when the image is loading? Or is this not possible?
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?
I have a Dell Studio XPS 1640 and I am trying to restore it to factory settings. I have inserted the operating system disc and I get a message "cannot find a system image on this computer."
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
I am attempting to create a backup image of my Windows 7 OS but when using the native Backup utility I only see a way to create an image with all of my files attached to the image when all I want is just a backup of just the barebones system. I lost my original Windows 7 Install disk so was hoping there was a way to get a copy of the OS since I just recently ordered an SSD. Basically I was hoping to move my OS install over to the SSD while keeping my files on my current HDD intact.
Not sure what happened, the netbook is supposed to come with a re-image recovery point, but maybe i accidentally deleted it. anyway, that's not going to happen and i can't reinstall cleanly with a format because it is win 7 starter so i do not have a cd. can i just delete my cookies, my files, and uninstall all of my programs and sell it? the thing i'm worried about is access to bank accounts or anything else similar i used the internet for.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 620 Processor, AMD64 Family 16 Model 5 Stepping 2 Processor Count: 4 RAM: 16126 Mb Graphics Card: ATI Radeon HD 4200, 368 Mb Hard Drives: C: Total - 953866 MB, Free - 854043 MB; D: Total - 953765 MB, Free - 953619 MB; Motherboard: ASUSTeK Computer INC., M4A785TD-M EVO Antivirus: Trend Micro Client/Server Security Agent Antivirus, Updated and Enabled
My machine is making a weird sound and I want to be prepared for the worst before I let a technician touch it.I'm running Windows 7 on my PC and am backing up files to a Microsoft Home Server but want a complete "copy" of my PC system (programs, files, settings, etc.).My head is starting to spin with everthing I've read and heard about cloning and imaging not to mention all the software choices (cloud or external hard drive) and if external hard drive is the way to go, which one.
I tried to create a disk image using the Windows 7 feature. The creation failed with a message that chkdsk /r should be run on the source and destination HDs. Destination HD was error free. Source HD had bad clusters replaced in five files.Second attempt to create a disk image failed with the same message.There are no system symptoms, everything seems to be working as usual.
After i bought my sony vaio VPCEF3E1E/WI i didn't received a windows CD but when i turned on the laptop it installed windows from an windows 7 image on C: or X: . Does anyone know how i can start that image to repair my laptop using a command prompt
we have two different PC's[PC1 and PC2](hardware totally different) PC1 After preparing all my windows 7 (installing programs, configuring them, installing updates, activating programs and so on) I make my drive C: total image back up to external hard drive. PC2 I Boot up windows 7 recovery startup and choose restore from image and then I put in external hard drive with usb and make it restored on my other computer. Everything looks fine, it finishes with no errors and then system restarts. When windows are finishing to show "Windows starting" screen, computer restarts instantly.Then system autimatically suggests me to repair it, so ok then auto repairs are scaning and guess what it can't repair, because it finds some kind of problem with drivers, could be that they are incompatible with my new PC.how to make this work, how to fix issue that old PC's drivers are being loaded, maybe I am able to turn it off so default drivers are being loaded?The reason why I want to make this work cause I want to use it for multiple computers.
Simple summary:
PC1 Windows Image backed up to external HDD PC2 Windows Image restored from external HDD PC2 Windows can't start because of driver error
having a difficult issue with a customer who gets the following message when opening some but not all .exe files. Soz about the long message but ill list the things i have tried."C:Windowssystem32ajpjDhglj.DLL is either not designed to run on windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or software vendow for support."The error pops up for the same file name if i run say malwarebytes or explorer but not with Ccleaner. Clicking ok gets rid of the message and the program runs anyway.I thought the file name looked virus like but nothing gets picked up by malwarebytes or MSE. If i look for the file in System32 it is not there and is not hidden either. I searched drive C for the file and to my surprise it came up but in WindowssysWOW64 instead but all the letters were in caps this time. If i Scan it with MSE i get nothing but if i scan it or any other single file with malwarebytes the error changes to "C:WindowssysWOW64AJPJDHGLJ.DLL is either not designed to run on windows or.Most bad image threads ive read can be fixed by doing a SFC /SCANNOW but it doesnt work for me. Ill try updating him to sp1 in the meantime.
I'm building a Windows 7 image from scratch. Does anyone know how I can get the OEM info to display the make, model, and serial number of the PC in the System Properties automatically no matter which system I send this image to?I know you can set them manually in the registry, but I want to know if it's possible to pull this from the PC it's installed on.
I work for a company which needs to make small specialized PCs running Windows so they can run a specific program, hopefully on an 8gb CF card. I'm in the process of stripping down a copy of Windows 7 to be small enough for that, but that's something else. I need to be able to install the reduced copy of Windows 7 and our own software and then probably use Norton Ghost to create an image that I can just apply to every one of these computers we make in the future. Is there a way of creating this image from within my main OS instead of just creating and booting to a separate partition?
