Just picked up my first Win7 computer, and it came with no discs. No surprise there, but I'd like to make some recovery discs, but not the kind that Windows says you can make. I don't want access to tools for recovery, I want access to a physical install of the OS and the drivers.
Like the discs enterprise people get when they buy their machines. I must be googling wrong, because all I'm finding are results that teach me how to create a recovery tools disc, which isn't quite what I'm looking for.
When do you burn your System Recovering Discs (SRD)?The manufacturers of PCs all seem to recommend you burn your own recovery media shortly after you perform the initial Win 7 chores, thus providing one more return path to heaven when catastrophe strikes, e.g.total loss of your primary drive and the hidden recovery partition (HRP), or some incredible error on the part of the sys-admin who one day flunks his IQ test and tries something bold and exciting. The preferred or required medium for these discs is either DVD-R or DVD+R type, something hard and physical and large enough not to get lost but also readable under most circumstances. Note that Windows 7 only lets you perform ONE SRD burn. So far all is simple. Burn a DVD. Well, not so fast. I�m getting two HP systems, one laptop (LT) and one desktop (DT). The LT will have a Blu-Ray/ DVD reader but not a burner. The DT will have a full burner. Both systems will be on a LAN so on some versions of Windows 7-64 I will be able to burn the LT SRD on the DT burner. On some other versions of Windows 7 that may not be possible.
Now here is the tricky part. Since I�m getting in two new systems I opted to get the multi-system license for Office 2010. The multi-system license gives you three installs and is much more economical than buying several separate Office vendor installs. HP does not install that pre-ship so if I make the SRD immediately after Windows 7 install it will not reflect the later Office install. Notice that with the multi-system Office license each install eats one of the allowed installs hence you don�t want to do a repeat during system recovery. So it would seem that a possible strategy might be to postpone the SRD burn, which you only get one chance to do, until after the core applications are installed. The SRD burn is like old marriage; until system death do you not part. The above questions and strategy raises the more fundamental questions: What exactly is contained on the SRD and HRP the when the SRD is burned? Does the SRD contain and recover any changes made as a result of pre-burn installs and other system activity? Should you install all your critical and trusted applications that have limited licenses before you burn the SRD thus allowing an almost pain free restore from backups?
Note: Some context. In this configuration the intent is that the LT be an almost mirror of the DT, just on a smaller scale. When both systems are linked directly on the LAN, or via a VPN link, then resources will be shared. Else work can proceed on the either with all facilities possible. Both LT and DT will have Windows 7-64 Pro. Exactly how data synchronization will occur is still an open issue.
Note: Some retailers discourage buyers who ask about recovery media. They of course want to sell a plan where they do the recovery and will do so forever � promise, cross their heart and hope to die -- or until the U.S. Bankruptcy Court settles their affairs. HP on their Web sites strongly recommends you make the SRDs but also offers to provide them in the event of need with the caveat that they may not have the SRD for your model at some future date. Consider � your system dies Monday, you decide by Tuesday morning you have no choice but to recover from scratch. You order SRD�s FedEx next-day and by Wednesday or Thursday they arrive.
I am performing an image recovery. I have 4 DVDs that came with my laptop from geeksquad. They say HP System Backup. Everything runs smoothly in disc 1. When I get to disc 2 nothing happens at all. I do have an external hard drive. I was considering trying to copy the System back up discs from a different computer onto the external and then trying to do the system restore.
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit) Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
My Laptop came preloaded with Windows 7 Home Premium and I would like to create system recovery disks. I have a drive labeled RECOVERY (D. How do I create recovery disks from this drive?
My Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
I'm helping a friend with her windows 7 emachine (64 bit) and when its all back in working order, I'd like to make her a set of recovery discs but I have a few questions before proceeding. I read that you only get the option of doing it once - so it better be right the first time.I've found instructions for making a repair disc, also instructions for creating recovery discs - would those be the same? The computer did not come with any os disc at all, so I'm wondering if making repair/recovery disc is possible without an os disc?
I bought a refurbished dell laptop with windows 7 on it the other day but I'm normally a linux user. I am trying to make a disc image but it is behaving a bit weirdly. I follow the steps but after it made the first disc, it tells me to insert another disc and also label it newuser pc with the date and the number 1. Not long ago, I made back up discs for a friends windows 7 desktop and it did not behave this way, it instructed to use 2, 3, etc for the next discs. I'm not sure if this thing is making any progress or not.
I have been trying to make recovery discs for the Toshiba Satellite laptop. I went throught the Recovery Disc Creator Wizard which informed me to have five DVD discs ready. By following the onboard instructions I completed three discs on Verbatim DVD-R 8.5 GB: Recovery Disc 1 and 2, and a 3rd Windows Recovery Environment disc. However, when I was starting the 4th disc the computer fist failed to acknowledge it and then opened the drawer requiring another disc. The disc was empty as far as I know but I went back to the shop and bought five more discs and the system also rejects these although they are identical. However, the applications disc requirement states either a 4.5 or flashmedia to be inserted to make only one disc. I think I will buy the 4.5 disc and see if it works.
I am running a HP G62 435DX Laptop with AMD Turion II P540 dual core processor, have received multiple blues screens and lockups so i did a reinstall to factory condition, still got blue screens, HP said that my extra recovery D Drive was probably infected with malware which i disagreed with so they sent me the 3 dvds to reinstall everything and it was running good for a day then 2 freezes and tonight first BSOD, no message but i am gonna include the dump file, I have a feeling that my memory may have dust in there or is not seated right but I have not opened the laptop yet. HP says if I open it they will not replace it if it is bad. Its windows 7 64 bit OS and i just installed all the windows updates available, I probably shouldnt have installed the optional ones, but i did.
I'm about to help my mom reinstall her computer. She has a nasty virus that is preventing her from her job as a reservation agent (she works from home), and I need to make sure I can fully reinstall correctly before diving in. Whenever I have needed to reinstall my own computer, all I have to do is restore directly from the hard drive. Her computer isn't quite built like this. Initially, she had to create recovery discs to restore from instead, and I have never dealt with recovery discs before. Is it done the same exact way as restoring from the hard drive? I have found 4 DVDs. She initially created 2 but they failed and apparently she had to start over and create the 4 I found. I'm slightly worried about installing this wrong.. I'm afraid there might be a 5th disc, although she insists there are 4. Are there any precautions I should take before going through with it?
Where can I get the recovery discs for a Sony Vaio PCV-6603, the Sony tech support site does not even recognise the number, also where can I get a replacement ethernet adapter?
Did a fix there recently on a HP pavilion. it suffered a hard drive failure and there was no recovery discs in situ. I purchased a replacement hd and purchased recovery discs from hp. So the build went fine and everything installed ok. Then it asked me for the product key. Now I have several Windows 7 discs but the only reason I had purchased the recovery discs is because the key sticker had faded and was illegible. So after spending 38 bucks on these discs I cant get past the activation issue. I was able to read an xp key before in the OS but when i googled this procedure for Windows 7 I ran into all kinds of key finding tools etc. I tried 4 but none of them worked, they gave me keys but activation rejected them as default keys.
I am receiving side by side errors when trying to open windows office and Quickbooks. When searching these errors, I was told I need to reinstall windows 7. I don't mind doing this, but where can I get the program without purchasing it or will a set of recovery discs work? If so, how do I get the recovery disc. No discs came with my laptop.
The hard disk of my Gateway NV78 notebook pre-installed with Windows 7 HP has crashed. I have made the recovery discs in 3 DVDs . I will be buying a new hard disk. I would like to know whether it is possible to install Windows 7 HP on the new hard disc from the recovery discs or I have to go in for a new installation disc.
I changed the hard drive in my Sony Vaio FW51ZF from a 500gb to a 750gb and when I try to restore from the recovery discs I made when I purchased the machine (I made 3 sets just in case!) it restores the recovery partition and I think drive C but when it says remove disc and restart to restore programs to drive C, I get a recurring error message saying "Windows could not complete the installation. To install Windows on this computer , restart the installation". The only thing that is different is the hard drive size, but I kept the C drive partition to the factory default size.
I deleted my restore settings by mistake and don't have a disc to restore from. I ordered discs from hp but that wont work, its a hp compaq cq57 that came with windows home premium which I installed ultimate on myself. I have loads of issues and would like it back to how it was when new.
So I made a mistake while taking on a friend's problematic sony vaio laptop. They were wanting to install a newly purchased Kaspersky av, but after uninstalling the old version of Kaspersky there was a problem with an unresponsive usb mouse & mouse pad. I wasn't able to resolve the issue through various repair programs and manually reinstalling the driver, which was giving off the error code of not being properly installed or functioning. With owners consent, I decided to let Vaio Care to bring the computer back to factory condition. (I wish the owner had the owners manual to this thing.)I made sure to backup all of the files that the owner needed saved, but failed to make any sort of backup recovery disk for the computer. Not sure if it's too late to do so, but the computer will not boot to windows any longer. I get a white blinking cursor on a black background immediately after Vaio disappears from the screen upon bootup, but cannot do anything with it. I made a windows 7 home premium iso dvd, and when booting from it I reinstalled windows onto one of the 3 partitions on the hd (the largest of the 3 which was labeled "Primary" type). Of the other two partitions, one was labeled "Primary" and was named "System Reserved" but only 101MB, and the other was labeled "System" and was named "Recovery" and is 7.7GB. When installing, the computer does a restart but then boots up from the disk again starting the entire process over again. So I changed it to boot from the HDD, but still get the same problem of a blank cursor and windows not booting up.When attempting the System Recovery Options on the Windows 7 dvd I'm given 3 different partitions (2 of which are 400+GB, labled windows 7 operating system, and located on (D: ) Local Disk). I'm guessing this might stand for the old windows 7 from the factory, and the one I installed. The other partition is 7.7GB and labeled Start VAIO Recovery Center located on (Unknown) Recovery.System Restore, System Image Recovery, and windows Memory Diagnostic aren't doing any good. Startup Repair only gives me an issue for one of the 3 Partitions, the (Recovery Partition), and states that Startup Repair cannot repair this computer automatically, saying that the "Problem Event Name: StartupRepairOffline".
When going through command prompt I see that old data & drivers are still on the disc, but was wondering if it was too late to make some sort of a recovery disc for it? My concerns are that when I do a wipe of the drive and a clean install of Windows 7, I'm going to have many issues without having sony's factoryware installed. Am I able to make my own disk to reinstall Sony's factoryware? What's the best way of getting this computer back to fully functioning?I have access to the drivers on Sony's support site: Sony eSupport - VGN-FW510F - Support
I can't get my PC system to play Blu-ray discs. I have tried several different play programs (WinDVD and 2 versions of Cyberlink). Both programs try to update the AACS key every time I try to play a disc.Neither one is successful, I guess because the movie never will play.
My sister gave me her laptop to do some repairs. I have been working on this thing for more hours than I wish to admit (mostly scans running like the Ad-Ware scan that is now on hour 7). Between her, and her 2 kids using it its has too much going on that need to be removed.The Laptop has a Vista sticker on it but was upgrade and is running 7 Home Premium. She purchased it from her neighbor who she no longer associates with. So the odds of her getting the 7 Home Premium DVD from her are slim to none.I have went through and cleaned up most of the crap and am working on getting it to run a smooth as new (or better once de-crapped). can I create a restore disc once I get it to the point I am now that will be just as good as any restore disc?
cannot create a recovery disc in acer apire one - following all directions. Cannot get beyond eRecovery management - cannot click on a drive for the CD rom and cannot click on start.
