I bought a refurbished dell laptop with windows 7 on it the other day but I'm normally a linux user. I am trying to make a disc image but it is behaving a bit weirdly. I follow the steps but after it made the first disc, it tells me to insert another disc and also label it newuser pc with the date and the number 1. Not long ago, I made back up discs for a friends windows 7 desktop and it did not behave this way, it instructed to use 2, 3, etc for the next discs. I'm not sure if this thing is making any progress or not.
I'm helping a friend with her windows 7 emachine (64 bit) and when its all back in working order, I'd like to make her a set of recovery discs but I have a few questions before proceeding. I read that you only get the option of doing it once - so it better be right the first time.I've found instructions for making a repair disc, also instructions for creating recovery discs - would those be the same? The computer did not come with any os disc at all, so I'm wondering if making repair/recovery disc is possible without an os disc?
Did a fix there recently on a HP pavilion. it suffered a hard drive failure and there was no recovery discs in situ. I purchased a replacement hd and purchased recovery discs from hp. So the build went fine and everything installed ok. Then it asked me for the product key. Now I have several Windows 7 discs but the only reason I had purchased the recovery discs is because the key sticker had faded and was illegible. So after spending 38 bucks on these discs I cant get past the activation issue. I was able to read an xp key before in the OS but when i googled this procedure for Windows 7 I ran into all kinds of key finding tools etc. I tried 4 but none of them worked, they gave me keys but activation rejected them as default keys.
The hard disk of my Gateway NV78 notebook pre-installed with Windows 7 HP has crashed. I have made the recovery discs in 3 DVDs . I will be buying a new hard disk. I would like to know whether it is possible to install Windows 7 HP on the new hard disc from the recovery discs or I have to go in for a new installation disc.
I intend to load Ubuntu 10.04 onto my home desktop machine while retaining Win XP as well. I'll be creating a dual boot system, in other words, and then using XP only to run Photoshop. The rest of the stuff I need to do gets done just fine with Firefox, Open Office and Thunderbird.
The discussions about how to do this indicate a "restore disc" for XP should be created prior to starting, unless you still have the disc that came with the system.
I have the original Dell OS "re-installation" disc, still in the envelope with the key printed on the back.
My question: is the "re-installation" disc that came with the computer the same as a "recovery disc"? If not, what is the difference? And how do I go about creating a "recovery" disc.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz, x86 Family 6 Model 15 Stepping 13
So I made a mistake while taking on a friend's problematic sony vaio laptop. They were wanting to install a newly purchased Kaspersky av, but after uninstalling the old version of Kaspersky there was a problem with an unresponsive usb mouse & mouse pad. I wasn't able to resolve the issue through various repair programs and manually reinstalling the driver, which was giving off the error code of not being properly installed or functioning. With owners consent, I decided to let Vaio Care to bring the computer back to factory condition. (I wish the owner had the owners manual to this thing.)I made sure to backup all of the files that the owner needed saved, but failed to make any sort of backup recovery disk for the computer. Not sure if it's too late to do so, but the computer will not boot to windows any longer. I get a white blinking cursor on a black background immediately after Vaio disappears from the screen upon bootup, but cannot do anything with it. I made a windows 7 home premium iso dvd, and when booting from it I reinstalled windows onto one of the 3 partitions on the hd (the largest of the 3 which was labeled "Primary" type). Of the other two partitions, one was labeled "Primary" and was named "System Reserved" but only 101MB, and the other was labeled "System" and was named "Recovery" and is 7.7GB. When installing, the computer does a restart but then boots up from the disk again starting the entire process over again. So I changed it to boot from the HDD, but still get the same problem of a blank cursor and windows not booting up.When attempting the System Recovery Options on the Windows 7 dvd I'm given 3 different partitions (2 of which are 400+GB, labled windows 7 operating system, and located on (D: ) Local Disk). I'm guessing this might stand for the old windows 7 from the factory, and the one I installed. The other partition is 7.7GB and labeled Start VAIO Recovery Center located on (Unknown) Recovery.System Restore, System Image Recovery, and windows Memory Diagnostic aren't doing any good. Startup Repair only gives me an issue for one of the 3 Partitions, the (Recovery Partition), and states that Startup Repair cannot repair this computer automatically, saying that the "Problem Event Name: StartupRepairOffline".
When going through command prompt I see that old data & drivers are still on the disc, but was wondering if it was too late to make some sort of a recovery disc for it? My concerns are that when I do a wipe of the drive and a clean install of Windows 7, I'm going to have many issues without having sony's factoryware installed. Am I able to make my own disk to reinstall Sony's factoryware? What's the best way of getting this computer back to fully functioning?I have access to the drivers on Sony's support site: Sony eSupport - VGN-FW510F - Support
I have been trying to make recovery discs for the Toshiba Satellite laptop. I went throught the Recovery Disc Creator Wizard which informed me to have five DVD discs ready. By following the onboard instructions I completed three discs on Verbatim DVD-R 8.5 GB: Recovery Disc 1 and 2, and a 3rd Windows Recovery Environment disc. However, when I was starting the 4th disc the computer fist failed to acknowledge it and then opened the drawer requiring another disc. The disc was empty as far as I know but I went back to the shop and bought five more discs and the system also rejects these although they are identical. However, the applications disc requirement states either a 4.5 or flashmedia to be inserted to make only one disc. I think I will buy the 4.5 disc and see if it works.
Just picked up my first Win7 computer, and it came with no discs. No surprise there, but I'd like to make some recovery discs, but not the kind that Windows says you can make. I don't want access to tools for recovery, I want access to a physical install of the OS and the drivers.
Like the discs enterprise people get when they buy their machines. I must be googling wrong, because all I'm finding are results that teach me how to create a recovery tools disc, which isn't quite what I'm looking for.
I am running a HP G62 435DX Laptop with AMD Turion II P540 dual core processor, have received multiple blues screens and lockups so i did a reinstall to factory condition, still got blue screens, HP said that my extra recovery D Drive was probably infected with malware which i disagreed with so they sent me the 3 dvds to reinstall everything and it was running good for a day then 2 freezes and tonight first BSOD, no message but i am gonna include the dump file, I have a feeling that my memory may have dust in there or is not seated right but I have not opened the laptop yet. HP says if I open it they will not replace it if it is bad. Its windows 7 64 bit OS and i just installed all the windows updates available, I probably shouldnt have installed the optional ones, but i did.
I'm about to help my mom reinstall her computer. She has a nasty virus that is preventing her from her job as a reservation agent (she works from home), and I need to make sure I can fully reinstall correctly before diving in. Whenever I have needed to reinstall my own computer, all I have to do is restore directly from the hard drive. Her computer isn't quite built like this. Initially, she had to create recovery discs to restore from instead, and I have never dealt with recovery discs before. Is it done the same exact way as restoring from the hard drive? I have found 4 DVDs. She initially created 2 but they failed and apparently she had to start over and create the 4 I found. I'm slightly worried about installing this wrong.. I'm afraid there might be a 5th disc, although she insists there are 4. Are there any precautions I should take before going through with it?
When do you burn your System Recovering Discs (SRD)?The manufacturers of PCs all seem to recommend you burn your own recovery media shortly after you perform the initial Win 7 chores, thus providing one more return path to heaven when catastrophe strikes, e.g.total loss of your primary drive and the hidden recovery partition (HRP), or some incredible error on the part of the sys-admin who one day flunks his IQ test and tries something bold and exciting. The preferred or required medium for these discs is either DVD-R or DVD+R type, something hard and physical and large enough not to get lost but also readable under most circumstances. Note that Windows 7 only lets you perform ONE SRD burn. So far all is simple. Burn a DVD. Well, not so fast. I�m getting two HP systems, one laptop (LT) and one desktop (DT). The LT will have a Blu-Ray/ DVD reader but not a burner. The DT will have a full burner. Both systems will be on a LAN so on some versions of Windows 7-64 I will be able to burn the LT SRD on the DT burner. On some other versions of Windows 7 that may not be possible.
Now here is the tricky part. Since I�m getting in two new systems I opted to get the multi-system license for Office 2010. The multi-system license gives you three installs and is much more economical than buying several separate Office vendor installs. HP does not install that pre-ship so if I make the SRD immediately after Windows 7 install it will not reflect the later Office install. Notice that with the multi-system Office license each install eats one of the allowed installs hence you don�t want to do a repeat during system recovery. So it would seem that a possible strategy might be to postpone the SRD burn, which you only get one chance to do, until after the core applications are installed. The SRD burn is like old marriage; until system death do you not part. The above questions and strategy raises the more fundamental questions: What exactly is contained on the SRD and HRP the when the SRD is burned? Does the SRD contain and recover any changes made as a result of pre-burn installs and other system activity? Should you install all your critical and trusted applications that have limited licenses before you burn the SRD thus allowing an almost pain free restore from backups?
Note: Some context. In this configuration the intent is that the LT be an almost mirror of the DT, just on a smaller scale. When both systems are linked directly on the LAN, or via a VPN link, then resources will be shared. Else work can proceed on the either with all facilities possible. Both LT and DT will have Windows 7-64 Pro. Exactly how data synchronization will occur is still an open issue.
Note: Some retailers discourage buyers who ask about recovery media. They of course want to sell a plan where they do the recovery and will do so forever � promise, cross their heart and hope to die -- or until the U.S. Bankruptcy Court settles their affairs. HP on their Web sites strongly recommends you make the SRDs but also offers to provide them in the event of need with the caveat that they may not have the SRD for your model at some future date. Consider � your system dies Monday, you decide by Tuesday morning you have no choice but to recover from scratch. You order SRD�s FedEx next-day and by Wednesday or Thursday they arrive.
Where can I get the recovery discs for a Sony Vaio PCV-6603, the Sony tech support site does not even recognise the number, also where can I get a replacement ethernet adapter?
I am receiving side by side errors when trying to open windows office and Quickbooks. When searching these errors, I was told I need to reinstall windows 7. I don't mind doing this, but where can I get the program without purchasing it or will a set of recovery discs work? If so, how do I get the recovery disc. No discs came with my laptop.
I changed the hard drive in my Sony Vaio FW51ZF from a 500gb to a 750gb and when I try to restore from the recovery discs I made when I purchased the machine (I made 3 sets just in case!) it restores the recovery partition and I think drive C but when it says remove disc and restart to restore programs to drive C, I get a recurring error message saying "Windows could not complete the installation. To install Windows on this computer , restart the installation". The only thing that is different is the hard drive size, but I kept the C drive partition to the factory default size.
I deleted my restore settings by mistake and don't have a disc to restore from. I ordered discs from hp but that wont work, its a hp compaq cq57 that came with windows home premium which I installed ultimate on myself. I have loads of issues and would like it back to how it was when new.
I got a new laptop and it's full of crappy software, I'm lazy so I don't want to take the time to uninstall it. So I just want to do a clean install of windows, but the laptop didn't come with a recovery disk
I am performing an image recovery. I have 4 DVDs that came with my laptop from geeksquad. They say HP System Backup. Everything runs smoothly in disc 1. When I get to disc 2 nothing happens at all. I do have an external hard drive. I was considering trying to copy the System back up discs from a different computer onto the external and then trying to do the system restore.
I have an Asus Essentio desktop and it didnt come with any Win7 discs. Is there anyway to extract Win7 and burn to a disc? I only ask because I want to rebuild my PC and wanted a fresh install without all the other software that came on my PC.
I have been researching the topic and am at a loss after around an hour of fruitless research. I recently upgraded from xp 32 bit to windows 7 32 bit. I want to upgrade to 64 bit so theres more RAM available and cannot find any information on doing it without discs that doesnt use USB or something. Got an external hard drive what the hell do I do? I downloaded the files but then couldn't open of course bc they were 64 bit files or whatnot.
So it has come to the point where I can FINALLY get an SSD (and I look forward to it very much), however I've come across what could be a little problem.I want to fresh install everything on the SSD (my computer is so long overdue a reformat it's disgraceful), however I can't find/never had the discs for windows 7.When I bought the computer it came with windows vista Home Premium, with an eligibility for free upgrade to W7 home premium. I duly upgraded to windows 7 of course and all has been dandy since (maybe 2 years now, that's how long I've not reformatted for!).But now, I can't find a disc for windows 7 anywhere, I have the Vista Home Premium disc, which has the W7 upgrade slip inside with a serial number on, but no W7 disc is to be found. I'm pretty OCD about keeping my software discs and general 'important stuff' together, so I'm beginning to think it may have been a digital download?Either way, whether I have lost it or never had it, how can I go about reinstalling windows7, preferably without buying it again... I'm guessing downloading an .ISO and creating a bootable disc, provided I can find my cd-key?
I have now installed win 7 three times, 64 bit and now 32 bit and have the same problem. I have read many similar problems on various forums and microsoft have been remotely on my PC for the last 2 days, and cannot resolve the I have 2 DVD RW drives, and both of them can read all types of media with no problems. When blank discs are inserted, all programs trying to access the drives just lock up. The "not responding" message will clear as soon as the disc is ejected and everything is then back to normal. If I leave the disc in the drive it will eventually recognise it after about 1.5 hours, but I can then do nothing with it.Microsoft have stated to me today that it is not an issue with Windows 7 and I should contact the manufacturers of the drives for help or updated drivers. All my drivers are showing as being up to date, and I cannot find any other drivers on the OEM websites.
Prior to purchasing, the upgrade advisor stated that I would have no issues moving from XP to WIN 7. Microsoft have informed me today that the upgrade advisor will not guarantee any piece of hardware will work correctly after win 7 install, it only indicates if any hardware will cause instability problems !!!I have an internal LITE-ON SHM-165P6S, and a USB Lightscribe drive built into my HP C8180 printer. These are 2 completely different drives that are exhibiting the same problem (only win 7 is the common theme)
Is this even possible. I thought I had made discs when I got my laptop but I cannot find them anywhere. I have tried the f8 thing but only get a windows didn't close properly message. I have tried the start +0 button and it goes to the same message. I have a repair disc and have done a full back up and removed all my files I don't want to lose. Previous dramas with HDDRECOVERY partition seems to have caused further problems I think.
My Dell PC came with Vista installed on it and physical discs to re-install. I then got Windows 7 for free due to the timing of when I bought the PC. I presume the discs were the upgrade variety, but I don't have them in front of me. I know when I totally reformatted my harddrive recently for a problem, I had to install Vista first and then 7... leading me to believe now that the Windows 7 install discs were the upgrade and not full.I just got the "full" version of Windows 8 Pro from Microsoft DreamSpark and plan on dualbooting to a separate partition alongside Windows 7... to give it a test run.Eventually, I will probably wipe the Windows 7 partition and extend it so that I have my Windows 8 partition and a 2nd partition for files and whatnot.can I take the Vista install disc and then the Windows 7 disc and install them on another PC? I am pretty sure I am doing a full install of Windows 8 (with its own key) and therefore wouldn't be using the Vista key or the Windows 7 key that is tied to the Vista key?
Is there anything that I have done wrong here? I am trying to use DVD-R+ Double-sided discs as backup media for Windows 7 Backup/Restore program. It worked once, but now I'm getting message that the disc can't be used for my 2nd backup??? I have a DL disc drive which works fine for everything else but the backup.
