Backup & Restore Failed Because Of Auto-Windows 7 Update?
Aug 16, 2012
I have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch
View 6 Replies
ADVERTISEMENT
Jun 21, 2011
I was trying to restore my OS from a back up I made but when I run it, it comes up with this message: "restore failed because a disk which was critical at backup is excluded. to continue you need to either remove the disk from exclusion list or detach it from machine or clean it using diskpart utility, and then retry restore. if you cannot clean or detach it then change the disk signature".
View 1 Replies
View Related
Oct 12, 2011
Is this file safe to have operating on my computer???
View 2 Replies
View Related
Aug 23, 2012
When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies
View Related
Aug 8, 2009
I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies
View Related
Jul 17, 2012
I have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
Sep 11, 2010
Many of you are familiar with ERUNT (The Emergency Recovery Utility NT). It will help you perform a complete Registry Backup and Restore. Good protection for registry errors. ERUNT Some have had problems with the autobackup feature in Windows 7. This feature makes a complete registry backup every day. For some this doesn't work, so you can accomplish this using the Task Scheduler instead.
To create the task:Start> Type Admin tools in search box and press enter
Select Task Scheduler In Actions, on the right pane> Create basic task
Name> Whatever you want
Description> Whatever you want
Next
[code]....
View 3 Replies
View Related
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
May 25, 2012
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies
View Related
Aug 1, 2010
I got a warning in the message centre telling me that windows in unable to auto update i rtied munually updating and that won't work either
View 9 Replies
View Related
Feb 26, 2012
I have a Win7 64-bit system and have been successfully using Windows backup on an approximately monthly basis. I ran it before going to bed last night and woke up to a "The backup failed." when I tried to create a system image of both of my hard discs. The error is "Incorrect function. (0x80070001)". I found a workaround solution at Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and looked up and found a number of "junction points", most rooted at c:UsersDilipAppData - but the problem is that there is no such folder.
View 9 Replies
View Related
Feb 17, 2011
I am trying to make an image backup of my hard drive This drive is approx 100 GB used, On the windows 7 backup recovery I select the Image backup On the Create a system image box enabled On a hard disk Iomega HDD ( J 818.48 GB free, After I press next This is the message I get. The Backup failed, There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes to be backup up, the minimum required disk space for shadow copy creation.
View 2 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Feb 18, 2012
My ASUS Notebook was running fine when I went to bed the other night and Windows 7 did an auto update. I logged on the next morning and all the USB, Network Adapter, and Sound drivers were dead. I checked, and it appears that a few of the components of the Windows update did not complete successfully (.Net framework, Silverlight, etc.), so I assume this has something to do with it. I assumed it would be no big deal to fix the drivers, but boy was I wrong. Here's what I've tried (and failed) to fix this.
View 9 Replies
View Related
Jul 3, 2011
Its gotten kinda annoying to cancel out of that windows error msg and retry a wifi connection, is there something that can auto-retry it?
View 7 Replies
View Related
Dec 7, 2012
I recently installed some updates in my Proline notebook, but after installing the 30 percent, it failed to restart, with the screen showing nothing (as if it's off). I then tried to restore it to an earlier time via safe mode but the restore point available is only the one as at the time of the update. I tried to create a restore point, but when i tried, i cannot even find system protection when i looked for it and it directs me to system properties where my computer's description is blank and it cannot be edited.Even the updates cannot be uninstalled via safe mode.Is there no other options i can try in order to start my laptop normally again?
View 10 Replies
View Related
Aug 26, 2012
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies
View Related
Jan 2, 2013
I have Windows 7 Pro 64bit set to automatically update the OS. Three days ago I lost connectivity on my shared home network that uses a Netgear WN2000RPTv2 wireless extender to connect to my Ruku which had worked perfectly to stream movies. (Amazon Prime). When I began to check out the systems for possible errors, I noticed that there had been updates for Netgear, several optional and one recommended. All failed with the error code of 80070103. I've tried unplugging my routers, did a hard restart to factory defaults, etc., all resulting in no change to the systems. The desktop pc connected to it is as follows:
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: AMD FX(tm)-8150 Eight-Core Processor, AMD64 Family 21 Model 1 Stepping 2
Processor Count: 8
RAM: 10079 Mb
Graphics Card: AMD Radeon HD 7570, -2048 Mb
Hard Drives: C: Total - 932364 MB, Free - 856809 MB; D: Total - 21079 MB, Free - 2654 MB;
Motherboard: Gigabyte, 2AC8
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 5 Replies
View Related
Jul 12, 2012
Laptop auto-hibernates after 4 minutes immediately after Windows 7 update
View 1 Replies
View Related
Sep 14, 2012
So it all started last night. My computer was unresponsive, and after clicking "shut down" a few times to no avail, I decided to do a hard reset. I didn't think anything would happen, but afterwards it just wouldn't boot back up. It goes to the windows logo and stays there. I don't get any errors, it just hangs there. I have tried many things, so far nothing has worked.
I have tried booting into safe mode. This does not work, it gets stuck at classpnp.sys and stays there. I have tried booting from the windows 7 disc. This does not work, after it loads the disc it will hang at a black screen. I have tried switching from IDE to AHCI. This has worked, but not fixed the problem. When booting into safe mode it will crash instead of hanging.
When booting from the windows 7 disc I can almost reinstall windows, however I get the error "Windows could not format a partition on disk 1. The error occurred while preparing the partition selected for installation. Error code 0x80070057." When attempting to restore windows to a restore point I get the error "The system image restore failed. Error details: Windows backup failed to read from the recovery volume. (0x8078002F)"
I have tried connecting the SSD to a different windows 7 computer in a attempt to reformat it, however just plugging it in would give the same problem to that computer. So, is my SSD toast? Did I mess it up beyond repair? Now system repair will not hang on IDE, but still gives me the same errors. Also, now it says missing operating system. Not sure how that happened.
View 6 Replies
View Related
Aug 13, 2011
My computer shut down unexpectedly and when I tried to start it back up it wants to perform a launch repair which fails for some reason. I have tried system restore and keep getting the following error: system restore failed to replace the fileD:\ProgramData\Microsoft\IdentityCRL\production\temp\wlidui_WLIDSVC\BUTTON.J I am not sure if this is some kind of virus and how to remove it. I also cannot start up in safe mode or at the command prompt. Nothing has been working.
View 2 Replies
View Related
Apr 18, 2012
I have reviewed my update history and noticed security update KB2621440 failed in MARCH, I haven't had any problems, when I look at the details it says error code:80004004, since then all other security updates have installed okay. Will the fact that latest security updates were successful mean that everything is okay.
View 5 Replies
View Related
May 6, 2011
I have win 7 x64, all updates are ok except Update for Internet Explorer 8 and ATK0110 ACPI Utility. I have acpi from asus site installed for my system and its ok. Why is update for internet explorer 8 failed, is it because I have internet explorer 9 installed......
View 5 Replies
View Related
Feb 23, 2012
I've tried to install the sp1 update several times now, allways getting the error 800b0100. I read up on the problem in several forums but nothing has worked for me. I ran the System Update Readiness Tool but I still can't install the update.
View 3 Replies
View Related
Sep 5, 2011
I have the problem that the service WLAN Auto-Config isn't started. When I try to start the service manual then the error 1068 appear: "Error 1068: The dependency service or group failed to start." I have tried the three steps of onopko, but this is not working to my computer. On advice of StalkeR I have add the reg files of Black Viper site as Safe as well default. Every time I have restarted my computer after adding the reg files, but both files are resolving me problem.
View 1 Replies
View Related
Jan 17, 2012
I now have W 7 Home premium. I have windows update set to auto update. As I was checking email and just cruizin the net etc. My pc just shut down and restarted. I discovered that it was the auto update. I want to continue to use auto update, but I don't want my pc to shut down and restart even though it warns me.
View 1 Replies
View Related
Feb 8, 2013
Long ago i updated my bluetooth adapter driver, and the caused malfunction. I downloaded the driver from Dell Support website (apparently there are 3 under 'Network', and i get a lucky shot) and the bluetooth is fucntioning once again. however i checked through the device manager and found '!' marks on Bluetooth Peripheral Device. something is not right. Recent windows update (automatically) has failed to install over and over again, hence prompting to redownload the same update every time i turn on the laptop. Specifically, its is 'security update for the .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2: January 8, 2013 (KB2742595)'.. There is another update coming (also tagged as Important) but come to fail as well. So currently there is 2 pending updates.While im having these problem, the boot time has increases noticeably. Long black screen appears before the login page turn up. Some says this is related to device/driver error. im not sure myself. Very recently i have my Avast Antivirus not working (turned off) and every time i ask it to turn on or resume, nothing happens. It remain not-functioning and so, i uninstall Avast and adopt AVG Antivirus. i think this is around when i was installing the bluetooth driver from Dell.
View 2 Replies
View Related
Jan 15, 2013
about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.
this is the file of MGA.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
[Code].....
View 3 Replies
View Related
Aug 28, 2012
Dozens of Windows 7 Updates failed when I took the recommended. I think it's because they were for 64 bit and I have 32 bit. Now, everytime I shut dow, it takes ages because it tries to install those updates. Then when I eboot, it reads Failure configuring, revertin changes - and bingo, the laptop shuts down
View 4 Replies
View Related
Apr 19, 2011
I have a problem with restore failed error=1117 in win 7 what do I need to do Also It's says About the NLS data is missing or corrupt
View 4 Replies
View Related
