I've tried to install the sp1 update several times now, allways getting the error 800b0100. I read up on the problem in several forums but nothing has worked for me. I ran the System Update Readiness Tool but I still can't install the update.
View 3 RepliesI have 6 updates that will not install (KB2633873) (KB2641653) (KB2645640) (KB2654428) (KB2640148) (KB2660075). I have tried each of them separately and all have failed with the same error, I have downloaded and ran the System Update Readiness Tool with no success. Here is my CheckSUR.log.
Code: =================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 14.0
2012-03-19 02:13
[code].....
I am trying to install the "Update for Windows 7 for x64-based Systems KB2718704)," however, whenever I try to install it, I get the 800B0100 Error Code. I have tried using Windows Update to do it automatically, and I have also tried to manually install it by downloading it from the Microsoft website; neither method has workedAlso, this the TSG SysInfo log:Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz, Intel64 Family 6 Model 42Stepping 7Processor Count: 4RAM: 6056 MbGraphics Card: Intel(R) HD Graphics, -1988 MbHard Drives: C: Total - 939685 MB, Free - 620803 MB; F: Total - 476937 MB, Free - 263103 MB;Motherboard: Dell Inc., 0GDG8YAntivirus: AVG Internet Security 2011, Updated and Enabled
View 13 Replies View RelatedWindows Update error code: 800b0100
View 5 Replies View RelatedI'm working on a Brand New Dell Inspiron 1525 with W7 OS. I was in the middle of catching it up on all the updates and they went in fine except it when it got to Service Pack 1, It will not install SP1. I receive the error code: 800B0100 I also went thru the steps of "Get help with this error" and it went thru "Windows Update troubleshooter" said the problem was "fixed", however still failed the next 4 tries, any suggestions? THX!!!
View 4 Replies View RelatedI am having this problem through Windows Update, also I downloaded the stand alone DVD and it still won't work, I've tried the SURT and it says it can't run on this computer. It's a new laptop, Sony Vaio VPCEE33EL with only 2 weeks of use and nothing out of the ordinary installed.
View 1 Replies View Relatedthe error 800B0100 (when attemted MS updates)Tnds me to download the System Update Readiness tool (KB947821) - but this does not help at all.This doesn't even appear that it can be run?I have only (2 days) ago installed the o/s (Win 7 ultimate 64bit) and already there are problems? You wouldn't mind so much, but the MS 'he all.I've searched the net, and seen all manner of 'fixes' for this
View 3 Replies View RelatedI am having problems updating windows 7 professional 64bit 'windows update'. Also the system is not allowing me to update Microsoft Security Essential. I also have AVG free addition installed and this also cannot update.
View 1 Replies View Related[CODE]
View 7 Replies View RelatedI installed a lot of updates yesterday, except DotNet 3.5 SP1 and Windows 7 SP1, because WU gives me the following errors when I try to install such updates:
800B0100
80073712
I already tried the Update Readiness Tool and nothing.
about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.
this is the file of MGA.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
[Code].....
I bought my computer from best buy a couple of days ago and I recently got a message saying that my version of windows is not genuine. When I try to run the windows activation update it gives me "Update installation failed. Error information - 0x800B0001" and I still get the message that my windows is not genuine.
View 12 Replies View RelatedI'm unable to do any windows updates due to error code 800B0100. I think a recent virus I had may have tampered with update files. I tried running the System Update Readiness Tool as suggested in Help and Support however the update installation on that failed too. Due to other problems I've been having recently I'm considering re-installing my OS at this point.
View 1 Replies View RelatedI am installing SP1 for windows 7, I get the error 800B0100, I have already tried the system readiness tool 2 times and all it does is install a hotfix.
View 5 Replies View RelatedI just Formatted my pc and all updates have been installed only for SP1. I've tried The windows standalone Installer nothing is working ???
View 1 Replies View RelatedUpdate readiness tool - finds missing files. ================================= Checking System Update Readiness. Binary V - Pastebin.coThis pastebin was after I was able to find most of the files, except for the few listed as missing now. ================================= Checking System Update Readiness. Binary V
View 2 Replies View RelatedI have reviewed my update history and noticed security update KB2621440 failed in MARCH, I haven't had any problems, when I look at the details it says error code:80004004, since then all other security updates have installed okay. Will the fact that latest security updates were successful mean that everything is okay.
View 5 Replies View RelatedI have win 7 x64, all updates are ok except Update for Internet Explorer 8 and ATK0110 ACPI Utility. I have acpi from asus site installed for my system and its ok. Why is update for internet explorer 8 failed, is it because I have internet explorer 9 installed......
View 5 Replies View RelatedLong ago i updated my bluetooth adapter driver, and the caused malfunction. I downloaded the driver from Dell Support website (apparently there are 3 under 'Network', and i get a lucky shot) and the bluetooth is fucntioning once again. however i checked through the device manager and found '!' marks on Bluetooth Peripheral Device. something is not right. Recent windows update (automatically) has failed to install over and over again, hence prompting to redownload the same update every time i turn on the laptop. Specifically, its is 'security update for the .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2: January 8, 2013 (KB2742595)'.. There is another update coming (also tagged as Important) but come to fail as well. So currently there is 2 pending updates.While im having these problem, the boot time has increases noticeably. Long black screen appears before the login page turn up. Some says this is related to device/driver error. im not sure myself. Very recently i have my Avast Antivirus not working (turned off) and every time i ask it to turn on or resume, nothing happens. It remain not-functioning and so, i uninstall Avast and adopt AVG Antivirus. i think this is around when i was installing the bluetooth driver from Dell.
View 2 Replies View RelatedI have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch
View 6 Replies View RelatedDozens of Windows 7 Updates failed when I took the recommended. I think it's because they were for 64 bit and I have 32 bit. Now, everytime I shut dow, it takes ages because it tries to install those updates. Then when I eboot, it reads Failure configuring, revertin changes - and bingo, the laptop shuts down
View 4 Replies View RelatedI'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies View RelatedA while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
I was applying the some updates to Windows 7 Ultimate 64-bit and the update process failed. I shut down the computer and when it rebooted, the computer reported my Internet connection was down. My computer is still getting an IP address and DNS settings from the router. I can ping 127.0.0.1 but as soon as I try to ping my router I get the destination host net unreachable message
- I have tried uninstalling and reinstalling IPv4 (netsh int IP reset C: esetlog.txt & netsh Winsock reset (both as administrator))
- I have tried uninstalling .NET since that is one of the upgrades that failed.
- I have tried re-running Windows Update to see if the updates which had downloaded would install (failed)
Windows troubleshooter is worthless as it keeps suggesting the network cable is unplugged or broken.
I have a new build using Windows 7 HP SP1 64-bit which has been up and running for about a month. MS updates for 11/14/12 included the Kernel-Mode Driver Framework version 1.11 for Win 7. This update failed to install (several times), even when done alone. First time since building system where it has failed an update. Only thing I have added since original build is a EVGA GTX 650 video card (last week).
View 10 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4024 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1820 Mb
Hard Drives: C: Total - 226373 MB, Free - 123192 MB;
Motherboard: Gateway, SJV50MV
Antivirus: PC Tools Internet Security Anti-Virus, Updated and Enabled
I've been having some problems installing KB2757638 Windows update for weeks now. Tried troubleshooting but I always get the same result.... installation is failed.
Over the past week I have been prompted for multiple windows updates. Some have worked, some have not. I had a tiny box show up last night saying that my computer was going to run maintenance and I delayed it. As I shut down, it gave me the installing or configuring updates blue screen. This morning I got that screen again, got to 100% before it told me it failed. Opened windows and all looked ok.Now I cannot open webpages. IE/firefox/Opera all open, but none can open any website. I get the usual screen you get when you can't access a page. Internet is working in the house. I've tried multiple other devices. Wireless is turned on with the laptop and I attempted to run the troubleshooter for my wireless connection. It says the connection is fine.
View 5 Replies View RelatedI tried to update my leveno thinkpad 14edge and a sign said that the system administrators polices won't allow it to be updated. My question is Why? and who is system administrator or where do I change the setting so I can update.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , 32 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, x64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 2996 Mb
Graphics Card: Intel(R) HD Graphics, 1274 Mb
Hard Drives: C: Total - 475738 MB, Free - 407021 MB;
Motherboard: LENOVO, 057826U, Not Available, 1ZH3903R2PP
Antivirus: Microsoft Security Essentials, Updated and Enabled
I have an HP Pavilion G6-1d40ca. It crashed the other day while I was using it, and when I restarted it, it went to BIOS update. It froze while updating, and died in itself (I think the battery died, it wasn't plugged in. I never knew about BIOS update, so I wasn't expecting for the battery to die during the update, so I didn't plug it in.) Second time, booted it up (it was plugged in this time), and went into BIOS update once again. All's good, was able to use the laptop for about five minutes, then it crashed once again. Now, when I boot it up, nothing comes up on the screen. No nothing. The power button is on, the wi-fi is on, the LED light is blinking non-stop, more than 6 times than what is referred to the HP website.
I tried doing the remove battery and adapter, press power button for 30 seconds, plug it in without the battery, but to no avail. I also did the whole win+B, but doesn't work either. I tried pressing f11, but nothing comes up on the screen. I don't remember where I put the recovery discs that came with the laptop. I thought I put it on the box together with recovery discs for our other computers at home, but I guess I didn't. The thing is, I don't know where to begin, since I don't have anything on the screen itself. Not even a start-up logo or something.
The latest slew of updates has brought me some trouble, and one of this woes is a failed update. Here it is: [URL]
I read about my problem here: [URL]
Unfortunately, I'm not sure if my problem is the same as theirs, and if it is, I don't know how to fix it; I don't want to insult anyone, but the input on how to fix it was a bit vague.
I have a hp 4 month old laptop. I used it yesterday, turned it off, when I turned it back on 4 hours later, it gave me a message that it needed to do a chkdisk, so it ran that, then started in what looks like safemode. It gave me an error message that says "Windows Socket Initialization Failed". I did a little research and tried to do a system restore, there are no restore points found. It will not connect to the internet, it also give me a message that it cannot connect to the windows service.
View 1 Replies View Related