Windows Boot Slowly And Update Constantly Failed
Feb 8, 2013
Long ago i updated my bluetooth adapter driver, and the caused malfunction. I downloaded the driver from Dell Support website (apparently there are 3 under 'Network', and i get a lucky shot) and the bluetooth is fucntioning once again. however i checked through the device manager and found '!' marks on Bluetooth Peripheral Device. something is not right. Recent windows update (automatically) has failed to install over and over again, hence prompting to redownload the same update every time i turn on the laptop. Specifically, its is 'security update for the .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2: January 8, 2013 (KB2742595)'.. There is another update coming (also tagged as Important) but come to fail as well. So currently there is 2 pending updates.While im having these problem, the boot time has increases noticeably. Long black screen appears before the login page turn up. Some says this is related to device/driver error. im not sure myself. Very recently i have my Avast Antivirus not working (turned off) and every time i ask it to turn on or resume, nothing happens. It remain not-functioning and so, i uninstall Avast and adopt AVG Antivirus. i think this is around when i was installing the bluetooth driver from Dell.
View 2 Replies
ADVERTISEMENT
Jun 2, 2012
I have an HP Pavilion G6-1d40ca. It crashed the other day while I was using it, and when I restarted it, it went to BIOS update. It froze while updating, and died in itself (I think the battery died, it wasn't plugged in. I never knew about BIOS update, so I wasn't expecting for the battery to die during the update, so I didn't plug it in.) Second time, booted it up (it was plugged in this time), and went into BIOS update once again. All's good, was able to use the laptop for about five minutes, then it crashed once again. Now, when I boot it up, nothing comes up on the screen. No nothing. The power button is on, the wi-fi is on, the LED light is blinking non-stop, more than 6 times than what is referred to the HP website.
I tried doing the remove battery and adapter, press power button for 30 seconds, plug it in without the battery, but to no avail. I also did the whole win+B, but doesn't work either. I tried pressing f11, but nothing comes up on the screen. I don't remember where I put the recovery discs that came with the laptop. I thought I put it on the box together with recovery discs for our other computers at home, but I guess I didn't. The thing is, I don't know where to begin, since I don't have anything on the screen itself. Not even a start-up logo or something.
View 4 Replies
View Related
Jul 2, 2012
My PC takes about 4 minutes to boot! I have tried everything possible including running xbootmgr -trace boot -prepSystem -verboseReadyBoot. Win XP never gave me the headaches I have experienced with Win7. This OS is very unstable and very sensitive to hardware specs. I remember I could not install Win7 until I changed a SATA cable while XP installed on the same machine without worries.
View 2 Replies
View Related
May 11, 2012
my computer automatically updated on the 8th of may of this year, and now wont completely start up. Once the windows logo appears it restarts and goes through the process all over again, i've been dealing with this all day
View 3 Replies
View Related
May 8, 2012
I have tried updating them one-by-one but they still end up failing on me.
View 9 Replies
View Related
Feb 27, 2011
Can't Update To Avast 6 And Computer Freezes Constantly
View 1 Replies
View Related
Apr 18, 2012
I have reviewed my update history and noticed security update KB2621440 failed in MARCH, I haven't had any problems, when I look at the details it says error code:80004004, since then all other security updates have installed okay. Will the fact that latest security updates were successful mean that everything is okay.
View 5 Replies
View Related
May 6, 2011
I have win 7 x64, all updates are ok except Update for Internet Explorer 8 and ATK0110 ACPI Utility. I have acpi from asus site installed for my system and its ok. Why is update for internet explorer 8 failed, is it because I have internet explorer 9 installed......
View 5 Replies
View Related
Feb 23, 2012
I've tried to install the sp1 update several times now, allways getting the error 800b0100. I read up on the problem in several forums but nothing has worked for me. I ran the System Update Readiness Tool but I still can't install the update.
View 3 Replies
View Related
Aug 16, 2012
I have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch
View 6 Replies
View Related
Jan 15, 2013
about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.
this is the file of MGA.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
[Code].....
View 3 Replies
View Related
Aug 28, 2012
Dozens of Windows 7 Updates failed when I took the recommended. I think it's because they were for 64 bit and I have 32 bit. Now, everytime I shut dow, it takes ages because it tries to install those updates. Then when I eboot, it reads Failure configuring, revertin changes - and bingo, the laptop shuts down
View 4 Replies
View Related
Sep 4, 2011
I bought my computer from best buy a couple of days ago and I recently got a message saying that my version of windows is not genuine. When I try to run the windows activation update it gives me "Update installation failed. Error information - 0x800B0001" and I still get the message that my windows is not genuine.
View 12 Replies
View Related
Apr 25, 2012
I was applying the some updates to Windows 7 Ultimate 64-bit and the update process failed. I shut down the computer and when it rebooted, the computer reported my Internet connection was down. My computer is still getting an IP address and DNS settings from the router. I can ping 127.0.0.1 but as soon as I try to ping my router I get the destination host net unreachable message
- I have tried uninstalling and reinstalling IPv4 (netsh int IP reset C: esetlog.txt & netsh Winsock reset (both as administrator))
- I have tried uninstalling .NET since that is one of the upgrades that failed.
- I have tried re-running Windows Update to see if the updates which had downloaded would install (failed)
Windows troubleshooter is worthless as it keeps suggesting the network cable is unplugged or broken.
View 1 Replies
View Related
Nov 15, 2012
I have a new build using Windows 7 HP SP1 64-bit which has been up and running for about a month. MS updates for 11/14/12 included the Kernel-Mode Driver Framework version 1.11 for Win 7. This update failed to install (several times), even when done alone. First time since building system where it has failed an update. Only thing I have added since original build is a EVGA GTX 650 video card (last week).
View 10 Replies
View Related
Feb 13, 2013
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4024 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1820 Mb
Hard Drives: C: Total - 226373 MB, Free - 123192 MB;
Motherboard: Gateway, SJV50MV
Antivirus: PC Tools Internet Security Anti-Virus, Updated and Enabled
I've been having some problems installing KB2757638 Windows update for weeks now. Tried troubleshooting but I always get the same result.... installation is failed.
View 12 Replies
View Related
Mar 10, 2012
I had Win XP on 1 HDD & installed Win 7 on a different HDD. I think I accidentally did a dual boot install because Win 7 won't boot without the the XP disk connected to the motherboard.
That was fine until my XP drive died yesterday. Now Win 7 won't boot. The first time I tried to repair, Win 7 was not even seen. so I booted into diskpart and made the partition active. Now it could be seen as an OS.
Then I did a startup repair. It did whatever it does & when it was finished I restarted the pc but it didn't boot I went back to diskpart and confirmed the partition was active. I went back startup repair and tried again.
This time it said it could not detect a problem, but it still will not boot. What else can I do? My pc is homebuilt. Right now I have the 1 sata drive, 2.53 ghz cpu, 4gb ram, onboard video & sound
View 5 Replies
View Related
Nov 18, 2012
Over the past week I have been prompted for multiple windows updates. Some have worked, some have not. I had a tiny box show up last night saying that my computer was going to run maintenance and I delayed it. As I shut down, it gave me the installing or configuring updates blue screen. This morning I got that screen again, got to 100% before it told me it failed. Opened windows and all looked ok.Now I cannot open webpages. IE/firefox/Opera all open, but none can open any website. I get the usual screen you get when you can't access a page. Internet is working in the house. I've tried multiple other devices. Wireless is turned on with the laptop and I attempted to run the troubleshooter for my wireless connection. It says the connection is fine.
View 5 Replies
View Related
Jan 24, 2009
hardware concerning: ethernet, specifically nforce4 network controller (drivers
situation: Assigning pc to static ip of router (wrt54g) ie; 192.168.1.xxx default gateway, and primary dns as 192.168.1.1
problem: upon bootup the network can not find the proper route and has to diagnose/troubleshoot to fix the problem, which was a nag every time and gadgets like weather and such would not be updated until this was resolved. If leaving network to dhcp the problem would not occur or nag. Yes dhcp set on router.
solution: simple really, going to nvidia's site and installing the latest nforce4 platform drivers fixed the problem (which i think is just a reinstall of the drivers as i think they are the same that are packaged with Windows 7 7000. Have not checked this yet to confirm
View 9 Replies
View Related
Mar 31, 2011
I tried to update my leveno thinkpad 14edge and a sign said that the system administrators polices won't allow it to be updated. My question is Why? and who is system administrator or where do I change the setting so I can update.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , 32 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, x64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 2996 Mb
Graphics Card: Intel(R) HD Graphics, 1274 Mb
Hard Drives: C: Total - 475738 MB, Free - 407021 MB;
Motherboard: LENOVO, 057826U, Not Available, 1ZH3903R2PP
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 1 Replies
View Related
Nov 19, 2012
The latest slew of updates has brought me some trouble, and one of this woes is a failed update. Here it is: [URL]
I read about my problem here: [URL]
Unfortunately, I'm not sure if my problem is the same as theirs, and if it is, I don't know how to fix it; I don't want to insult anyone, but the input on how to fix it was a bit vague.
View 1 Replies
View Related
Jan 13, 2012
have beeen reading through this amazing forum for the past couple of days trying to get my Dell 1545 working again, i have tried to reinstall the OS from a disc that came with the lpatop, to no availi created a system restore disk from the machine i'm writing this on....still to no avail....i can get into the setup menu's but like many others i can't get any further, I don't know how to get into the BIOS menu (and to be honest wouldn't know what to do if I did
View 9 Replies
View Related
Jul 15, 2012
i just bought this new mouse razer lachesis 5600..when i plugged in the mouse, install the driver, it went ok, no problems at all.the problems start when i reboot, the screen just freeze at the motherboard screen (MSI 890fxa-gd70)..i remember reading from this forum, to try unplugged all usb device, i did that, and my pc can boot normally.. mouse also have no trouble if i plugged it after i got on windows.. but everytime i reboot with mouse plugged in, it always freeze at the mobo screen..or i should unplugged my mouse everytime i want to reboot?
View 9 Replies
View Related
Nov 20, 2012
I have a computer I am trying to refurbish. The old hard drive failed. I purchased a new hard drive. The CD/DVD player on the computer does not work, but I am able to boot from a USB. I was able to install Ubuntu from USB with no problems and now have a new copy of windows 7, 32 bit (computer is also 32 bit). I have tried to boot from the windows copy on the USB drive using many different tutorials as well as using the windows USB/DVD download tool. Each time I boot from the usb stick, a screen comes up that says windows failed to start. It says it may be due to a hardware problem. All other solutions to this involve using the recovery CDs or partition which I am not able to because the CD/DVD drive is broken, and I would like to not have to buy another one.
View 3 Replies
View Related
Jul 25, 2012
I made the naive mistake of trying to upgrade from a Biostar TH67+ MB to a MSI Z77A-GD65 MB using my existing Windows install. After I installed the new MB and the new drivers within Win 7 Pro 64 bit, the machine wouldn't boot. So I reverted to the Biostar MB and it still won't boot. I have tried Safe Mode (which just hangs) and I have run Startup Repair several times. How I can further troubleshoot/repair the boot?
View 1 Replies
View Related
Mar 21, 2011
I'm currently running a WD 500g with Windows 7 Ultimate x64 and a Seagate 250g with Windows XP Home Edition. I recently changed my BIOS boot order from the WD to the Seagate to see if I could still run XP. Turns out I can. My problem is that now I can't load Windows 7 back up on the other hard disk.Bear in mind that I have no other OS' loaded on any other partitions, and these HDDs are separate. The Seagate is IDE and the WD is Sata.I can load perfectly fine if I set the Seagate to load, but I get the infamous "Bootmgr is missing, Press Ctrl Alt Delete to restart" error msg when I try to boot win7.
I'm running a custom PC with a Gigabyte GA-X58A-UD3R mobo
nVidia GeForce GTS450
Seagate 250g Windows XP
Western Digital 500g Windows 7
6g RAM
i7 940 processor
View 1 Replies
View Related
Jun 8, 2012
I upgraded to Win 7 Ultimate from Win XP Pro after my OEM disk picked up a few more scratches than it needed.During a re-installation it partially installed the windows XP setup with an error message of 'HAL.DLL' missing.I believe the residual setup loader is causing problemS.My PC insists on trying to boot from CD/DVD regardless of what I select.If I select boot from CD/DVD with my new Windows 7 disk I get the SAME message as if I didn't select boot from DC/DVD: Windows failed to start. This could be from a recent hardware or software change.
1.Please insert your windows install disk and click restart
2.Change language setting and click next.
3.Click repair... etc.
If you don't have the disk contact admin....ect.
File$LDR$
Status 0xc000000f
info: Selected entry not added/ application is missing or corrupt.
Enter Escape.
Escape = reboot to error listed above...
Enter = OS choice menu with:
1. 'windows 7'
2 'older verion of windows'
I select the ' older version' and the system gives me the same listed above error...I select 'windows 7' and, well.... here I am, posting this thread from my PC, Windows 7, updated, gageted and all running smoothly...Hibernate sometimes boots and sometimes shows the same error.....Start menu 'Shut down' and 'Restart' also don't work on the odd occasion....I researched and downloaded EasyBCD to delete the 'older version of windows' but it appears to have only 'deleted' it from Windows 7's 'eyes' because ultimately the thing is still showing on my OS choice menu and is evidently causing a few hiccups.
View 1 Replies
View Related
Nov 24, 2012
A new hard drive has been installed on my laptop. I tried to install windows 7 and it failed. I am missing the master boot manager. is there free software to fix this problem that I can burn to a dvd or usb flash drive?
View 2 Replies
View Related
Nov 25, 2012
how do you disable this warning failed to connect to a window service
View 1 Replies
View Related
Nov 21, 2012
I had a dual boot with Windows 7 and Win8. I wanted to remove Win8 cause I was bored and didn't need it. I did everything right.
Dual Boot - Delete OS
But the boot manager failed. When I restarted I got an error saying that their is some invalid information. I didn't have the Win 7 disc, so I put the Win 8 disc and installed it in the partition that had win 8 before, hoping that it would recognized Win 7. But hasn't. So now I have a partition of Win 7 but it is not getting recognized.
View 1 Replies
View Related
Sep 14, 2012
So it all started last night. My computer was unresponsive, and after clicking "shut down" a few times to no avail, I decided to do a hard reset. I didn't think anything would happen, but afterwards it just wouldn't boot back up. It goes to the windows logo and stays there. I don't get any errors, it just hangs there. I have tried many things, so far nothing has worked.
I have tried booting into safe mode. This does not work, it gets stuck at classpnp.sys and stays there. I have tried booting from the windows 7 disc. This does not work, after it loads the disc it will hang at a black screen. I have tried switching from IDE to AHCI. This has worked, but not fixed the problem. When booting into safe mode it will crash instead of hanging.
When booting from the windows 7 disc I can almost reinstall windows, however I get the error "Windows could not format a partition on disk 1. The error occurred while preparing the partition selected for installation. Error code 0x80070057." When attempting to restore windows to a restore point I get the error "The system image restore failed. Error details: Windows backup failed to read from the recovery volume. (0x8078002F)"
I have tried connecting the SSD to a different windows 7 computer in a attempt to reformat it, however just plugging it in would give the same problem to that computer. So, is my SSD toast? Did I mess it up beyond repair? Now system repair will not hang on IDE, but still gives me the same errors. Also, now it says missing operating system. Not sure how that happened.
View 6 Replies
View Related
