Failed Update Means No Internet
Nov 18, 2012
Over the past week I have been prompted for multiple windows updates. Some have worked, some have not. I had a tiny box show up last night saying that my computer was going to run maintenance and I delayed it. As I shut down, it gave me the installing or configuring updates blue screen. This morning I got that screen again, got to 100% before it told me it failed. Opened windows and all looked ok.Now I cannot open webpages. IE/firefox/Opera all open, but none can open any website. I get the usual screen you get when you can't access a page. Internet is working in the house. I've tried multiple other devices. Wireless is turned on with the laptop and I attempted to run the troubleshooter for my wireless connection. It says the connection is fine.
View 5 Replies
ADVERTISEMENT
May 6, 2011
I have win 7 x64, all updates are ok except Update for Internet Explorer 8 and ATK0110 ACPI Utility. I have acpi from asus site installed for my system and its ok. Why is update for internet explorer 8 failed, is it because I have internet explorer 9 installed......
View 5 Replies
View Related
Apr 25, 2012
I was applying the some updates to Windows 7 Ultimate 64-bit and the update process failed. I shut down the computer and when it rebooted, the computer reported my Internet connection was down. My computer is still getting an IP address and DNS settings from the router. I can ping 127.0.0.1 but as soon as I try to ping my router I get the destination host net unreachable message
- I have tried uninstalling and reinstalling IPv4 (netsh int IP reset C: esetlog.txt & netsh Winsock reset (both as administrator))
- I have tried uninstalling .NET since that is one of the upgrades that failed.
- I have tried re-running Windows Update to see if the updates which had downloaded would install (failed)
Windows troubleshooter is worthless as it keeps suggesting the network cable is unplugged or broken.
View 1 Replies
View Related
Jul 29, 2010
How can I protect a folder with a password or any other means?
View 2 Replies
View Related
Nov 29, 2012
yesterday when activated my scotiabank online, i opted for phishing control software and all of sudden my os windows 7 sht down saying a problem has been detected and windows has been shut down to prevent damage to your computer. Check for virusus or recent hard disk or softtware change. check your hard drive and and make sure it properly configure and terminate.Again says run CHKDSK/F for harddrive corruption then restart your computer.i tried for windows recovery options..did not work....gone for safe mode and all options tried did not work.when starts safe mode or anything on that..all of sudden blue window appears with above message...i dont have acer CD..or windows CD..
View 1 Replies
View Related
Feb 13, 2013
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4024 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1820 Mb
Hard Drives: C: Total - 226373 MB, Free - 123192 MB;
Motherboard: Gateway, SJV50MV
Antivirus: PC Tools Internet Security Anti-Virus, Updated and Enabled
I've been having some problems installing KB2757638 Windows update for weeks now. Tried troubleshooting but I always get the same result.... installation is failed.
View 12 Replies
View Related
Oct 1, 2011
i received this message when trying to read my mail: Your default mail content not properly installed. what does that mean? How do I fix it?
View 1 Replies
View Related
Apr 18, 2012
I have reviewed my update history and noticed security update KB2621440 failed in MARCH, I haven't had any problems, when I look at the details it says error code:80004004, since then all other security updates have installed okay. Will the fact that latest security updates were successful mean that everything is okay.
View 5 Replies
View Related
Mar 31, 2011
I tried to update my leveno thinkpad 14edge and a sign said that the system administrators polices won't allow it to be updated. My question is Why? and who is system administrator or where do I change the setting so I can update.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , 32 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, x64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 2996 Mb
Graphics Card: Intel(R) HD Graphics, 1274 Mb
Hard Drives: C: Total - 475738 MB, Free - 407021 MB;
Motherboard: LENOVO, 057826U, Not Available, 1ZH3903R2PP
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 1 Replies
View Related
Feb 23, 2012
I've tried to install the sp1 update several times now, allways getting the error 800b0100. I read up on the problem in several forums but nothing has worked for me. I ran the System Update Readiness Tool but I still can't install the update.
View 3 Replies
View Related
Feb 8, 2013
Long ago i updated my bluetooth adapter driver, and the caused malfunction. I downloaded the driver from Dell Support website (apparently there are 3 under 'Network', and i get a lucky shot) and the bluetooth is fucntioning once again. however i checked through the device manager and found '!' marks on Bluetooth Peripheral Device. something is not right. Recent windows update (automatically) has failed to install over and over again, hence prompting to redownload the same update every time i turn on the laptop. Specifically, its is 'security update for the .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2: January 8, 2013 (KB2742595)'.. There is another update coming (also tagged as Important) but come to fail as well. So currently there is 2 pending updates.While im having these problem, the boot time has increases noticeably. Long black screen appears before the login page turn up. Some says this is related to device/driver error. im not sure myself. Very recently i have my Avast Antivirus not working (turned off) and every time i ask it to turn on or resume, nothing happens. It remain not-functioning and so, i uninstall Avast and adopt AVG Antivirus. i think this is around when i was installing the bluetooth driver from Dell.
View 2 Replies
View Related
Aug 16, 2012
I have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch
View 6 Replies
View Related
Jan 15, 2013
about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it. after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.
this is the file of MGA.
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
[Code].....
View 3 Replies
View Related
Aug 28, 2012
Dozens of Windows 7 Updates failed when I took the recommended. I think it's because they were for 64 bit and I have 32 bit. Now, everytime I shut dow, it takes ages because it tries to install those updates. Then when I eboot, it reads Failure configuring, revertin changes - and bingo, the laptop shuts down
View 4 Replies
View Related
Jun 2, 2012
I have an HP Pavilion G6-1d40ca. It crashed the other day while I was using it, and when I restarted it, it went to BIOS update. It froze while updating, and died in itself (I think the battery died, it wasn't plugged in. I never knew about BIOS update, so I wasn't expecting for the battery to die during the update, so I didn't plug it in.) Second time, booted it up (it was plugged in this time), and went into BIOS update once again. All's good, was able to use the laptop for about five minutes, then it crashed once again. Now, when I boot it up, nothing comes up on the screen. No nothing. The power button is on, the wi-fi is on, the LED light is blinking non-stop, more than 6 times than what is referred to the HP website.
I tried doing the remove battery and adapter, press power button for 30 seconds, plug it in without the battery, but to no avail. I also did the whole win+B, but doesn't work either. I tried pressing f11, but nothing comes up on the screen. I don't remember where I put the recovery discs that came with the laptop. I thought I put it on the box together with recovery discs for our other computers at home, but I guess I didn't. The thing is, I don't know where to begin, since I don't have anything on the screen itself. Not even a start-up logo or something.
View 4 Replies
View Related
Nov 19, 2012
The latest slew of updates has brought me some trouble, and one of this woes is a failed update. Here it is: [URL]
I read about my problem here: [URL]
Unfortunately, I'm not sure if my problem is the same as theirs, and if it is, I don't know how to fix it; I don't want to insult anyone, but the input on how to fix it was a bit vague.
View 1 Replies
View Related
Sep 4, 2011
I bought my computer from best buy a couple of days ago and I recently got a message saying that my version of windows is not genuine. When I try to run the windows activation update it gives me "Update installation failed. Error information - 0x800B0001" and I still get the message that my windows is not genuine.
View 12 Replies
View Related
Nov 15, 2012
I have a new build using Windows 7 HP SP1 64-bit which has been up and running for about a month. MS updates for 11/14/12 included the Kernel-Mode Driver Framework version 1.11 for Win 7. This update failed to install (several times), even when done alone. First time since building system where it has failed an update. Only thing I have added since original build is a EVGA GTX 650 video card (last week).
View 10 Replies
View Related
Mar 8, 2010
I have problems with internet sharing. My laptop is connected to my home network wireless, and my x360 is connected to my laptop with a Ethernet cable. Now i can't turn on ICS. I get a error message "An error occurred while Internet Connection Sharing was being enabled. The dependency service or group failed to start"
I have also checked services.msc and ICS is set to manual, I've tried to set it automatic and restarted my computer, after reboot ICS is set to manual again. Can't force start, error message "Windows could not start the Internet Connection Sharing (ICS) service on Local Computer Error 1068: The dependency service or group failed to start"
View 9 Replies
View Related
Oct 23, 2012
Our PC internet quit working a few days ago. Our wireless laptop and Ipods work. After some (hours) of playing, I noticed our homepage was set to something Babylon. So realized we had some virus issues after research. I have run SpyBot S&D, SAS and Malwarebytes- all came up with some various serious threats. CouponBar, Babylon, I want it! etc. These programs seemed to have removed all the problems, but I still do not have access. My LAN can find my network, but says "no internet access" the wireless does not connect either on this PC.
My computer knowledge is minimal but after comparing various ipconfig screens, it seems to have something to do with the IP addresses. I read that 169.254...is not good. I disabled IPV6 and when obtaining IP addresses automatically didn't work- I typed in the ones listed on the details part of the adapter. Here is a screen shot of my IPconfig/all with LAN only: Windows IP Configuration Host Name . . . . .. . .
[code]....
View 2 Replies
View Related
Jul 28, 2012
I've been having a problem with a windows 7 home premium update. I have no virus's or spyware my computer runs find, but when I click update it will say 9 updates so I click update. Then when it updates they all update perfectly accept for one and it's an update for Internet Explorer 9 I have a Dell 1750 Inspiron AVG Antivirus and Firewall all included, Malewarebytes, Spybot Search & Destroy, So when I do these updates it restarts to finish them up then all of a sudden I can not connect to the internet no more, It says no signal witch there is a full bar and everything I tried clicking connect but it says limited access, So I fool around trying to fix it but it wont let me do nothing I know updates are very important for laptops but it's just wont let me online, But it would work really well before the updates is there anyway to get pass that and fix it I usually just do system restore at an earlier time before the updates cause I can never get back on the internet connected?
View 3 Replies
View Related
Jan 23, 2012
I am trying to update my computer's clock by synchronizing with an internet time source, but keep getting "Unable to continue - you do not have permission to perform this task. Contact computer administrator for help"!! As I am the only user, presume I am therefore the administrator, and have never had any trouble previously?
View 5 Replies
View Related
Feb 3, 2012
Internet Explore 9 wont install I've tried all their solutions on line but it just wont!(this has been going on since they launched 9!) I'm running EI8? There is also an update for Windows 7 but I can't in stall it (again this has been going on for a while) I get Error Code 643 Microsoft.NET Framework 4 client Profile for Windows7x86 ( KB982670) I've gone on to their web site but there seems to be on fix for this, so perhaps you can help with this too? Also I've just had the all clear from the brilliant Dave re a virus but when I ran a scan with Microsoft Security Essentials last night it crashed my computer and gave me a BSOD?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 2047 Mb
Graphics Card: Radeon X1550 64-bit (Microsoft Corporation - WDDM), 512 Mb
Hard Drives: C: Total - 1907726 MB, Free - 1488972 MB; D: Total - 1430796 MB, Free - 433582 MB;
Motherboard: , 4CoreDual-SATA2.
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 14 Replies
View Related
Jun 13, 2012
i am using windows 7 ultimate and 2 day ago i updated windows, and installed internet explorer 9 updates too, and then ie is out of service, whenever i click ie, it opens but suddenly crashes and doesnt respond, so i close program, again and again...i run Malwarebyte , there is no malware spyware or virus, but when i run iexplore.exe -extoff and start like that -without extensions- it starts as usual, without any problem,
View 2 Replies
View Related
May 28, 2012
So my son was in the middle of one of his blood bowl league games this evening and a popup asked him if he wanted to install a Windows 7 update. He's only 12 and inexperienced enough that he didn't just tell the system to wait a few hours until he could finish his game, so he told it to go ahead and instal. The result was his near-instant loss of internet (as well as his game, as he was timed out and his opponent got the win).
Even more serious, after the update was finished and his computer was restarted, he still cannot get an internet connection. I've tried rebooting, complete shutdown and then reboot, and asking the computer's internet tools to diagnose/fix the problem, all to no avail.
I read about running a system restore (restoring to an earlier version of windows), but when I tried I learned that that aspect of his system had been shut off.
I know there must be SOME way to fix this problem, but I can't think of what it might be. Even if the problem is due to the new Windows version, he has no way to download a fix for it because he has no internet connection.
View 11 Replies
View Related
Nov 6, 2012
My computer is set to not update automatically because once it updates, it won't allow access to internet (wireless or lan). I have to use a restore point to undo everything. My computer hasn't been updated for a year or more do to this problem. It can't find a problem when I run the help program and tells me to get on the internet to solve (won't let me do that in the first place)
View 2 Replies
View Related
Jun 19, 2012
My net stopped working on 16Jun. I got home from work today (17Jun) to troubleshoot and received the same problems that Amelia66 had in her post. I was connected to my router, but had "limited connectivity" and the troubleshooter said that "windows couldn't automatically bind the ip protocol stack." I spent an hour on the phone with Netgear's tech support thinking it was the usb wireless adapter. All the other computers/phones/printers in the house could connect. After the netgear guy hung up on me or dropped the call and didn't call back (nor was I going to call him back), I went to the store and got a new usb wireless adapter (cisco this time). Uninstalled the old one, installed the new one and...same deal. Connected to the router, but not the internet. Read through Amelia66's posting and decided to try to system restore to before the 16th to see if that would work since the instructions listed there by Ihatecats seemed over my head. The only reason for the restore points were windows updates. Restored to the previous windows update and now it works. I plugged the old wifi adapter in before the restore since that would be the program installed before the restore.
View 6 Replies
View Related
Aug 18, 2012
I have tried connecting to my router with both wireless and lan cable but they both fail. What is strange is that my vista laptop (currently using) has no problems connecting either wirelessly or using the same lan cable as my desktop failed with. My windows 7 desktop was working fine earlier today but after I went out it installed the updates and since then no amount of rebooting or restarting of the router has fixed the problem.
View 2 Replies
View Related
Nov 24, 2012
(I am using a XPS Studio 9100 which is a Desktop PC) Since about 3-4 months I'm having problem with Windows Update & Internet connection.My Internet speed is Anti virus: Avira and Avast! Anti Virus Fire wall: Comodo Firewall and installed yesterday Avast! Internet Security.I scan my computer on a monthly basis and I don't download "suspicious" websites nor download .exe frequently unless it's from a certified developer etc.Error when trying to download updates:
View 4 Replies
View Related
May 17, 2011
I am having a confusing time trying to figure out why my internet went from 10+ Mbps down to <1 Mbps after simply downloading a wireless card driver.From the beginning:My wireless download speed was 10+Mbps, and I was using the Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. This information is found in the Device Manager, under "Network".The driver for the card was 5.30.x.y (I can't remember the specific version number, but I do remember it was 5.30.something.something). Upon navigating to the Dell webpage, I wanted to see if there were any drivers for the same wireless card that were more updated, to perhaps increase performanceI navigated to the page for my computer (Dell Latitude D830), here. That page is for my model laptop. You'll notice that, in the drop down for "Operating System", there is no option to select Windows 7.
Regardless, I navigated to the driver under "Network", the Dell Wireless 1505 Draft 802.11n WLAN Mini-Card, and downloaded it. It was version 5.60.188.1, from 11/9/2009. This is where my problem began. After installing the driver and rebooting, my internet speed instantly went to below 1 Mbps. I have no clue why installing a later wireless card driver would mess up my speed.My only hypothesis is that the driver I downloaded is only compatible with Vista. Do I just re-download driver version 5.30.x.y or something to get it back? Why did it get so slow?
View 6 Replies
View Related
Jan 30, 2011
I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies
View Related
