I was trying to restore my OS from a back up I made but when I run it, it comes up with this message: "restore failed because a disk which was critical at backup is excluded. to continue you need to either remove the disk from exclusion list or detach it from machine or clean it using diskpart utility, and then retry restore. if you cannot clean or detach it then change the disk signature".
View 1 RepliesI have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch
View 6 Replies View RelatedHas anyone tried to burn a System Image (with Windows Backup and Restore) onto a BD-R disk?I have 52.5 GB used on my C drive (Windows 7 x64). I have a clean install, with windows updates, and it would be phenomenal if I could use my WH12LS30 (LG) internal blu-ray burner for the System Image creation, since I only have 1 harddrive.When I try a BD-R (and this is my 1st try at System Image burn) , I see "The media needs to be formatted before it can be used...". Just didn't sound right to procede.
View 2 Replies View RelatedWhen I try to back up and restore (my files) it does not complete. I get the message disk full. I tried to uncheck the (shut off and delte all files from system restore) but that does not help. When I check the amount of space available on the D drive, it shows as full, but system restore seems to work; any suggestions?
View 3 Replies View RelatedI was reading yesterday that if I want to restore a file, I need to go to the file and right click and select restore. If the file does not exist anymore then one would go to the directory where the file originally was and select restore (or something to that effect). I have two disks and I want to save some important files from one disk to the other. I have always used Windows 7 Backup but now I am not sure I am doing the right thing. What would happen if my main disk crashed and there was absolutely no hope of salvaging it? Could I still restore from the back up made by Windows 7 Backup? I won't know the file names or directory structure if one disk goes down completely.
View 5 Replies View RelatedTomorrow my new Samsung netbook will be delivered, Windows 7 Starter is preinstalled. I haven't had a netbook before, and I haven't used Windows 7 before.
I'd like to make an image of the HDD immediately after unpacking. I need to play around with Windows 7 and I probably want to remove bloatware. I may even want to install Ubuntu Netbook Edition. But in any case, I'd like to able to restore the original, clean HDD image.
What would be the best strategy to do this? Make an image (using eg. Partition Image) before even starting up Windows 7? Make an image after running Windows 7 once (perhaps it needs to register / validate / activate)? I do not want to get into trouble with multiple activation.
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedI have my Windows update settings to "notify but do not download." When I check my history of restore points I see that there are several created anyway with the description "Windows Update-Critical Update." I checked one of them for changes to programs and drivers and the were none. This seems to happening about every 3 days. Is this just an automatic update that is mislabeled? And why every three days - from my research it appears recovery points are supposedly scheduled every seven days?
View 4 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View RelatedOne of the hard disks suddenly failed to initialized. The first problem I found on this disk was unable to open one of the zip files then the machine crashed. After I restarted the machine the HDD drive was missing from the Computer. My computer has 6 hard drives including the missing one. One is Corsair SSD for the OS and the rest are Samsung, Hitachi and WD all of them are 1TB. When I checked on the Device Manager the Drive is there and the device status is properly working. I checked on the Disk Management and I got a message to Initialize the Disk then I followed the instruction. Again I got an error message " Virtual Disk Manager - The system cannot find the file specified." On the Disk Management windows the status of the Disk is "Unknown 931.51GB Not Initialized- Unallocated". I tried to initialize but the same error I got. I did not name this drive but it named automatically RV 01 and the Location is 0.I use Acronis Disk Director to fix the problem but it cannot change the status to online. What I did last week was I installed some programs to the Drive X instead of Drive C.My computer OS is Windows 7 64bits all the drivers and software are updated.
View 9 Replies View RelatedI have a Win7 64-bit system and have been successfully using Windows backup on an approximately monthly basis. I ran it before going to bed last night and woke up to a "The backup failed." when I tried to create a system image of both of my hard discs. The error is "Incorrect function. (0x80070001)". I found a workaround solution at Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and looked up and found a number of "junction points", most rooted at c:UsersDilipAppData - but the problem is that there is no such folder.
View 9 Replies View RelatedI am trying to make an image backup of my hard drive This drive is approx 100 GB used, On the windows 7 backup recovery I select the Image backup On the Create a system image box enabled On a hard disk Iomega HDD ( J 818.48 GB free, After I press next This is the message I get. The Backup failed, There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes to be backup up, the minimum required disk space for shadow copy creation.
View 2 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View RelatedI have restore points being created but on the occasions that I've tried to restore they have failed
View 3 Replies View RelatedI have been trying to do a backup with system image since Jan 15th on an Iomega 1TB external HD. Tried about 7 times and each time the backup fails at 57%. The message I receive with each failure is as follows- "Windows backup encountered an error when accessing the remote shared file. The semaphore timeout period has expired. Details: Error code 0x81000039" I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings. I tried doing a backup on a different external HD and still failed at 57%. I have no idea which remote shared file the program is looking for. I have a home network and one other computer. That laptop was turned on so if it was looking for a file there it was available. The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet. Did that and the backup still failed. I have the same setup on desktop and laptop Windows 7 SP!, Vipre antivirus and firewall, and I was able to do a backup on my laptop. Another slight problem is when I have the Iomega HD running my computer will freeze randomly. For this reason I don't keep it on all the time but just turn on for a monthly backup. I was able to do one initial backup on that HD with no problem. I was told to look at the windows backup log files but they all have a .etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on.
View 7 Replies View RelatedI bought 2 new 3Tb Seagate Expansion drives model STAY3000300.I tried to "Create a system image" and both 3Tb drives were presented as possible destination discs. I selected one of them and after a couple of messages about preparing and starting the following message was displayed. (same message on the other 3Tb drive as well)The backup failedBIG RED BAROne of the backup files could not be created.(0x8078002A)Additional Information:The request could not be performed because of an I/O device error, (0x8007045D)The system is Windows 7 64bit and bang up to date with Windows update. The system disc is a OCZ Agility 3 120Gb SSD.Another strange thing is I have been doing backups to another external disc for many months - a 1Tb Iomega portable external.The MAIN BU file is about 26Gb and, yes, all my discs are formated as NTFS so it is not a file size issue.
View 7 Replies View RelatedI recently saved over my Fallout 1 savegame and I want the old one back, I tried system restore but it failed due to an unspecified error, hinting to turn my antivirus off - which didn't work. I just want to old save file back, is there a program that can do that?
View 7 Replies View RelatedMy DVD drive disappeared so I want to do a system restore to get it back, but it fails and Windows tells me that it could not access a file. I have Zone Alarm and Malwarebytes, and I turned them both off, but it still fails.If there is no quick fix for this I would at least like to lock in my system restore snapshot so it doesn't get overwritten by a new one.
View 2 Replies View Relatedi am gitting when i try to run backup windows backup fail while determing libraries locations of one of the users included in backup . Details : A volume shadow copy service component encountered an unexpected error the error codes here are 2 of em 0x81000031 and 0x8004230f
View 4 Replies View RelatedI recently built a windows 7 home premium PC with an Intel 160 GB SSD as (C) for OS/programs and second 1TB HDD as (D) for data and backups. I also have a DVD burner (H). They are all SATA drives running in AHCI mode. Immediately after installing just windows, I used the windows backup feature to successfully create a system image to a local disk (D) which was and still is nearly empty. The next day, after installing drivers, updates, and a few programs, I went to create a second system image but this time it failed. The process started as it should have but halfway through it failed with the following message:
"The backup failed"
"The device is not connected (0x8007048f)"
At that point, after exiting the program, the D drive does not show up on my computer. Upon rebooting the D drive reappears. I searched the web and found some references to checking whether volume shadow copying services and their dependent services were working and that didn't work. Another reference said to try updating to a newer bios as some have bugs that screw up the enumerator for the drive order. The BIOS I use is the latest and wasn't changed since my first successful attempt at creating the system image.
Windows 7 Home Premium
Gigabyte GA-P55A-UD4 Bios 6 (latest)
Intel 160 GB SSD (C) OS
1 TB HDD (D)
Raedon 5770
4 GB DDR3 RAM
So it all started last night. My computer was unresponsive, and after clicking "shut down" a few times to no avail, I decided to do a hard reset. I didn't think anything would happen, but afterwards it just wouldn't boot back up. It goes to the windows logo and stays there. I don't get any errors, it just hangs there. I have tried many things, so far nothing has worked.
I have tried booting into safe mode. This does not work, it gets stuck at classpnp.sys and stays there. I have tried booting from the windows 7 disc. This does not work, after it loads the disc it will hang at a black screen. I have tried switching from IDE to AHCI. This has worked, but not fixed the problem. When booting into safe mode it will crash instead of hanging.
When booting from the windows 7 disc I can almost reinstall windows, however I get the error "Windows could not format a partition on disk 1. The error occurred while preparing the partition selected for installation. Error code 0x80070057." When attempting to restore windows to a restore point I get the error "The system image restore failed. Error details: Windows backup failed to read from the recovery volume. (0x8078002F)"
I have tried connecting the SSD to a different windows 7 computer in a attempt to reformat it, however just plugging it in would give the same problem to that computer. So, is my SSD toast? Did I mess it up beyond repair? Now system repair will not hang on IDE, but still gives me the same errors. Also, now it says missing operating system. Not sure how that happened.
I have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.
View 4 Replies View Relatedhave a Packard Bell Ixtreme M5722 thats running windows 7 64 bit home premium I was advised by packard bell to do a factory restore which failed half way through with error code 1392 file system currupt. Ever since then i've been unable to start up windows. I have used a Windows 7 recovery cd that lets me into command prompt but when i run sfc /scannow it just says "there is a system repair pending which requires reboot to complete" Obviously I can't reboot as it won't let me into windows at all. The recovery Essentials tools (windows 7 64-Bit Edition) doesn't work no restore point identified on computer and i don't have a recovery disk to use (I know i should have a backup disk but recently moved and lost my cd i created in move
View 4 Replies View RelatedI have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,
I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:
"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"
Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?
My OS: Windows 7 64 Professional
I was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair