When I try to back up and restore (my files) it does not complete. I get the message disk full. I tried to uncheck the (shut off and delte all files from system restore) but that does not help. When I check the amount of space available on the D drive, it shows as full, but system restore seems to work; any suggestions?
View 3 RepliesWhile System Restore usually does what it is supposed to do, sometimes it doesn't. When I am intending to do something a bit drastic or unusual on my desktop now, I routinely make a full registry backup. (Start/Run/type REGEDIT/OK/File/Export. Name and save the file in Documents) On my machine this takes 20 - 30 secs and results in a file around 200 MB. I have never had to use one of these backups to restore this machine so far
View 14 Replies View RelatedIs it possible to resotre individual files from a full Image Backup? I Created a System Image. If this is possible, how is it done?
View 3 Replies View RelatedI'm trying to backup the pictures, music, and videos that are saved on my buddies laptop. He forgot the password for the main account and whenever I try to transfer files to an external hard drive, a screen pops up and tells me to it cannot transfer files without password. Is there anyway to get around this? EDIT: I thought maybe it would be important to add that the account that I'm using to get access to the files must not have permissions to change anything on the computer. Don't ask me how my friend figured out how to restrict himself from changing anything on the computer, but he did and this general lack of knowledge about computers, likely got in into the trouble, that now is going to require me to do a full restore.
View 4 Replies View RelatedHas anyone tried to burn a System Image (with Windows Backup and Restore) onto a BD-R disk?I have 52.5 GB used on my C drive (Windows 7 x64). I have a clean install, with windows updates, and it would be phenomenal if I could use my WH12LS30 (LG) internal blu-ray burner for the System Image creation, since I only have 1 harddrive.When I try a BD-R (and this is my 1st try at System Image burn) , I see "The media needs to be formatted before it can be used...". Just didn't sound right to procede.
View 2 Replies View RelatedI was trying to restore my OS from a back up I made but when I run it, it comes up with this message: "restore failed because a disk which was critical at backup is excluded. to continue you need to either remove the disk from exclusion list or detach it from machine or clean it using diskpart utility, and then retry restore. if you cannot clean or detach it then change the disk signature".
View 1 Replies View RelatedI had windows 7 home premium free upgraded from Vista home premium.
1. The setup stored in D partition is whether win 7 or Vista. how can i confirm?
2. Recently i was creating system image but due to unavailable more blank dvd i could not completed and i had to interrupt after a single dvd disk. and again next day when i am trying to make system image, i could not getting any option at Backup and Restore folder in control panel. Pls advice.
My system info:
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7550 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4063 Mb
Graphics Card: NVIDIA GeForce GT 130M, 1024 Mb
Hard Drives: C: Total - 466843 MB, Free - 317496 MB; D: Total - 10091 MB, Free - 1408 MB;
Motherboard: Quanta, 361B
Antivirus: Microsoft Security Essentials, Updated and Enabled
When I try to use backup and restore, the backup and restore window informs me that my F: drive is not connected (which it is). Also if I click on "change settings" or "turn on schedule", the link appears not to work, it simply sends me to the system folder. I would like to set up some sort of automatic back up of the whole system (not just my personal documents) but can't figure out how to get it to work.
View 4 Replies View RelatedThe "back up now" button and "change settings" button and other buttons in the backup and restore center does not work, nothing happens except an icon flashes by in the taskbar. I have however managed to do a backup of my system drive but it won't let me do anything there now.
I've tried using system file checker to see if anything is wrong with the system files but it checks out ok.
I have just done a clean install of Windows 7 and after solving a lot of initial issues def-ragging the drive everything was fine.
I then discovered windows system restore was not working would not start. Even when I enabled the in services shadow copy I set it so on the first failure it would restart which it did. It had a dependency RPc I set that to automatic when I log on. I do not know what the default settings are for these; I would have thought start up if its monitoring your hard drive.
The "back up now" button and "change settings" button and other buttons in the backup and restore center does not work, nothing happens except an icon flashes by in the taskbar. I have however managed to do a backup of my system drive but it won't let me do anything there now.
I've tried using system file checker to see if anything is wrong with the system files but it checks out ok.
If you have any ideas I'd appreciate it.
After a clean install and all the programs i need/ want loaded, the Backup and Restore functions of Windows no longer work.
This hasn't happened any other time, except with this particular install of Windows, but i can't for the life of me find how to fix it from googling for a solution.
[i did find something that had to do with context menus from 3rd party programs making it not work, but it doesn't seem to apply to me as i don't usually use programs that alter context menus (except for winrar and adobe) i have also run MSE and Spybot (spybot doesn't matter much i know) and checked the integrity of windows system files (which turned out fine)]
When i open control panel, open system and security, and find the backup and restore panel with such options as "backup your computer" and restore files" - or - search for backup and restore from the start menu, what happens is it does not respond at all to me clicking on it - zero response except for a micro second (hardly noticeable) of a loading curser the first time only, then nothing.
I have also checked if the service is running after i click "backup and restore" it isn't, but even if i start it manually and try again, still nothing.
My rig is in my sig, computer is updated to the best of my knowledge and here is a list of the programs that i have installed:
3DMark VantageFuturemark Corporation
Adobe Acrobat 9 Pro - English, Français, DeutschAdobe Systems
Adobe AIRAdobe Systems Inc.
[Code].....
I was reading yesterday that if I want to restore a file, I need to go to the file and right click and select restore. If the file does not exist anymore then one would go to the directory where the file originally was and select restore (or something to that effect). I have two disks and I want to save some important files from one disk to the other. I have always used Windows 7 Backup but now I am not sure I am doing the right thing. What would happen if my main disk crashed and there was absolutely no hope of salvaging it? Could I still restore from the back up made by Windows 7 Backup? I won't know the file names or directory structure if one disk goes down completely.
View 5 Replies View RelatedI am running Windows 7 [64 bit]. I have been using Windows backup, but it has stopped working and I am unable to open the programme from the Control Panel.
View 1 Replies View RelatedTomorrow my new Samsung netbook will be delivered, Windows 7 Starter is preinstalled. I haven't had a netbook before, and I haven't used Windows 7 before.
I'd like to make an image of the HDD immediately after unpacking. I need to play around with Windows 7 and I probably want to remove bloatware. I may even want to install Ubuntu Netbook Edition. But in any case, I'd like to able to restore the original, clean HDD image.
What would be the best strategy to do this? Make an image (using eg. Partition Image) before even starting up Windows 7? Make an image after running Windows 7 once (perhaps it needs to register / validate / activate)? I do not want to get into trouble with multiple activation.
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View RelatedI am after a way to back up - I have a lot of data that requires transferring from an external hard drive and my desk top.Is the simple drag and drop the best way?
View 3 Replies View RelatedI have an HP Presario CQ57 laptop with windows 7 Premium. I keep getting the message that my backup disc is full,,like the others: Data file backups for this computer on HP_TOOLS (E:) and the D: are both full, when I try to delete either one I get told "you will not be able to restore files from this computer from backup" how can I solve this problem,,I did do a DELETE and run backup now but it lasts less than a week. I use my laptop for info and games,,not business.
View 8 Replies View RelatedMy problem is if I restart with HDD on,it freezes when windows logo pops up during startup. I have a bunch of saved stuff on the external besides the backup img.Its a 500gb.It still froze when I only had 10gb saved on it. Will it delete everything I have saved on my external if I boot the img? I have a extra 20gb laying around,it is large enough to hold my saved backup.
View 2 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View RelatedI have a Windows 7 Home Premium 32-bit with SP1 (OEM). I have already installed the Windows and activated online. Also i have installed all my motherboards drivers such as audio, lan, raid and gpu.The whole process took me around 1 hour 30 mins.Next month i'm planning to format my hdd and clean my pc (cleaning the dust from the fans, cpu).I do that every month.In the future i don't want to install Windows all over again (by installing it from a disc) it takes too long for my liking. Also with my OEM version of Windows i think you're only allowed 3 times activation by going online, then after that you have to call up Microsoft which is a hassle.What i want:
* I want to create a full system image of my whole hdd/windows/pc
* After a month or so i insert a disc or from another hdd and copy the entire image to a new hdd or a formatted hdd and have all my previous windows all installed with activated and with all drivers.
It is difficult for me to distinguish what parts of the Back up and restore screen apply just to creating a full backup and and which apply just to creating a file backup.
I know I can create a system Image by clicking in the upper left hand area of the screen (the create a system image link). But it is not clear to me how to create an incremental backup of a system image. Do I just select "Create a system Image" again, and Win 7 is smart enough to do an incremental system image backup automatically, or do I need to create some sort of schedule?
It is difficult to tell if schedules apply only to file backups or if they apply to creating a full system backup too.
Would like opinions on preferred easy full image back-up apps.
View 2 Replies View RelatedI have done a fresh system restore recently and have had to re-install my software and download all my windows updates. For some reason though my hard drive has now got 80 GB more space used than before I performed the restore, and I haven't even got any HD movies on my laptop
View 9 Replies View Related