Windows 7 Won't Launch And System Restore Failed?
Aug 13, 2011
My computer shut down unexpectedly and when I tried to start it back up it wants to perform a launch repair which fails for some reason. I have tried system restore and keep getting the following error: system restore failed to replace the fileD:\ProgramData\Microsoft\IdentityCRL\production\temp\wlidui_WLIDSVC\BUTTON.J I am not sure if this is some kind of virus and how to remove it. I also cannot start up in safe mode or at the command prompt. Nothing has been working.
View 2 Replies
ADVERTISEMENT
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
Mar 28, 2012
I recently saved over my Fallout 1 savegame and I want the old one back, I tried system restore but it failed due to an unspecified error, hinting to turn my antivirus off - which didn't work. I just want to old save file back, is there a program that can do that?
View 7 Replies
View Related
May 15, 2012
My DVD drive disappeared so I want to do a system restore to get it back, but it fails and Windows tells me that it could not access a file. I have Zone Alarm and Malwarebytes, and I turned them both off, but it still fails.If there is no quick fix for this I would at least like to lock in my system restore snapshot so it doesn't get overwritten by a new one.
View 2 Replies
View Related
Nov 12, 2011
I have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.
View 4 Replies
View Related
Aug 6, 2012
I was being an idiot and messed with Msconfig memory. Restarted and gave me bsod. After that I ran Startup repair system restore failed.I checked the memory box I think it was 0, not sure. if you need additional information let me know.
-What I did Messed with memory in Msconfig
-What I have access to in Startup Repair Cmd
-What I tried System restore Startup Repair
View 1 Replies
View Related
Jan 1, 2013
I tried restoring the computer to factory settings but after restoring and backing up the computer restarted and it wont go further than the startup page ..there's this error in 'setting up the services to install' windows it says to restart to continue installing windows...
View 2 Replies
View Related
Jul 31, 2011
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies
View Related
Jan 4, 2013
A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
View 3 Replies
View Related
May 5, 2012
I have been through and read the post on people having server execution failed messages, but they all seem to be for Windows Media Player etc. I have yet to find a post for someone having a hard time launching a game.
The game is The Sims 3 and I HAVE played it on my laptop before. In fact I was playing it less than a week ago and it launched just fine. I have made no changes to the game's settings, nor have I installed any new programs on my laptop. I am horribly confused as to why I am getting this error message when I have done nothing (to my knowledge) to change anything that would effect my game launching.
The only change that has been made since the last time I successfully played the game is a Mozilla Firefox update. I highly doubt that this would change a setting somewhere and make my game non-playable. I
View 1 Replies
View Related
Sep 24, 2011
My sister's computer is an HP Pavilion dv5t-2200 notebook PC running its native OS, Windows 7 Home Premium x64. In the last 24 hours, Avast found and attempted to remove some sort of malware. After the reboot, it recommended a full scan. After the scan was completed, the computer rebooted again. This is where the real problems began.With the exception of core programs and services, no other program will launch. Not Chrome, not AIM, not even Avast!. The only HP program still installed on the system, HP Support Assistant, will not start. Attempting to use Windows System Restore results in a BSOD as the computer is shutting down to begin the restore process. Upon returning to the desktop, a dialog box recommends that we run chkdsk, but of course that won't even launch.
Internet Explorer will launch, but the campus network requires a third-party client software install. Unfortunately, that's another program that will not launch.The computer has a recovery partition, but HP Recovery Manager is not installed or cannot be found, and attempts to download and install it have failed because 1) we cannot access the Internet to download it to the hard drive, and 2) it could not be installed from a flash drive containing the softpaq from HP.
View 2 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Apr 22, 2012
i actually lost my windows 7 bitlocker key and after that time my operating system is not starting
View 3 Replies
View Related
Aug 16, 2012
I have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch
View 6 Replies
View Related
Apr 19, 2011
I have a problem with restore failed error=1117 in win 7 what do I need to do Also It's says About the NLS data is missing or corrupt
View 4 Replies
View Related
Aug 25, 2011
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies
View Related
Jan 14, 2013
I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies
View Related
Mar 13, 2011
I have restore points being created but on the occasions that I've tried to restore they have failed
View 3 Replies
View Related
Apr 30, 2011
I click on Start go to Computer, Right Click then left click on Device Manager. Then nothing happens, huh? I try it again the look at my system and the CPU light blinks a few but not long and still nothing. I put the icon on the desktop and do the same thing, nothing. I type in Device Manager then it bring it up. It works that way but the shortcut is broken that is in the system.
View 3 Replies
View Related
Mar 9, 2012
have a Packard Bell Ixtreme M5722 thats running windows 7 64 bit home premium I was advised by packard bell to do a factory restore which failed half way through with error code 1392 file system currupt. Ever since then i've been unable to start up windows. I have used a Windows 7 recovery cd that lets me into command prompt but when i run sfc /scannow it just says "there is a system repair pending which requires reboot to complete" Obviously I can't reboot as it won't let me into windows at all. The recovery Essentials tools (windows 7 64-Bit Edition) doesn't work no restore point identified on computer and i don't have a recovery disk to use (I know i should have a backup disk but recently moved and lost my cd i created in move
View 4 Replies
View Related
Oct 19, 2012
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies
View Related
Jun 26, 2011
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Apr 17, 2012
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies
View Related
Jan 22, 2012
Trying to restore Emachine E28 laptop.After last install disk runs I receive the following message:Restore failed. Error code = 045 (WIM ApplyImage cannot apply image. the request could not be performed because of an I/O device error.)Have tried almost everything I can think of but no results.
View 5 Replies
View Related
Nov 23, 2011
I'm trying to restore Windows 7 on my computer (I'm currently using Ubuntu 11.10), and I keep getting Error Code 1005. I've tried everything, and nothing.
View 1 Replies
View Related
Feb 17, 2012
I installed a new MOBO last night (17/02/2012) and booted up and my Windows 7 could not boot. It went into repair mode and could not repair.
So I installed a new Windows 7 and now see the Windows.old folder. I would like to recover the huge amount of settings and personalisation from the old Windows system.
I have not communicated with anyone who has REALLY had a Windows recovery ever work.
If anyone knows, this is the perfect time for me to be shown the light.
View 4 Replies
View Related
Jun 21, 2011
I was trying to restore my OS from a back up I made but when I run it, it comes up with this message: "restore failed because a disk which was critical at backup is excluded. to continue you need to either remove the disk from exclusion list or detach it from machine or clean it using diskpart utility, and then retry restore. if you cannot clean or detach it then change the disk signature".
View 1 Replies
View Related
