Move Drive With Windows 7 Easily To Backup Computer Without Activation?
Nov 7, 2012
I would like to come up with a way to provide a full backup computer to my customers (offline, process control application). Currently doing this with WinXP and a hot-swap RAID-1 enclosure. If anything in computer1 dies, can quickly move the cables and the drive over to computer2, boot up and keep running. Now moving to Windows 7, more strict activation issues. Getting a separate windows license for each computer is not a problem, but how to either change the license key easily after the swap, or avoid activation altogether? Typical system is offline, possibly abroad and would like to make the failover as easy as possibly for customers.
One of the biggest annoyances when setting up wireless networks is remembering the security key and typing it correctly so that you can connect all laptops and netbooks to it. Windows 7 makes it easy to export your wireless settings from one machine to another. The backup of the wireless networks settings can be easily done from Windows 7, and the settings can be saved to a USB stick, and then the settings can be imported on laptops & netbooks running Windows XP, Windows Vista and Windows 7.
Just wondering what or if I could move an xp backup onto a raid 0 drive. I did setup the drives in raid in the bios, and they show as raid. I booted into my marcium backup and ran my xp backup onto the drive, that showed in marcium as a raid 0 drive. When I booted, which went fine, into xp it shows in disk management as raid 0. But the problem is, it shows two drives, together and the 2nd drive as being un partitioned. Therefore I'm only running on one drive. Is this fixable, or do I need a clean install?
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
Some of my external drive find on the PC... Windows 7 and other external drives don't.. Those shows up in the printer and devices.. How do I get them to work as a letter drive in my computer....I have bought 2 floppy drives and don't work either... everything works on my laptop.... Just so much trouble to hook everything up..
I purchased a larger external hdd for my Win 7 Backup. I would like to move or copy the existing Win 7 Backup/Restore files to the new external hdd to freeup the old external drive for other data. Do you just copy the Backup folders on the old hdd to the new drive? Strangely, the Win 7 Backup folders' properties show zero bytes. I have restored files / folders from the Backup files, so I know they are not empty.
What is the best course of action to transfer my retail lic. for Windows 7 home from one computer to another?
Here is the situation. I had Windows 7 on my Mac as a dual boot, and it was a upgrade from XP on the same partition on my Mac. I have since formatted and sold that Mac so Win. XP or 7 is no longer on it or anything.
I am building a new Windows machine I want to install XP on and then use my Win 7 home upgrade to install Win 7 on that machine. What is the best way to get XP and 7 deactivated from the old (nonexistent) Mac and reactivate on the new machine?
What a pain MS makes a simple situation. P.S. if I need to call MS what is the number?
I have done the separate program and storage drive before, but I was wondering if perhaps a way to back up my boot drive without necessarily raid. It was brought to my attention that if something were to go wrong with the data then raid would automatically copy it (which makes sense), or am I worrying to much?
I have big file (133Gb) backup file on my hard drive and I wanted to move this to external hard drive (Seagate FreeAgent GoFlex Drive). When I tried it to move or copy to the external I've got message: Error 0x8007045D: The request could not be performed because of an I/O device error. I was looking online for some help and I found some advice that I have to make chkdsk in cmd mode but when I tried I've got message: "Chkdsk" is not recognized as a internal or external command, operable program or batch file. I don't know how to solve this problem. Can someone help me? My OS is win 7 Enterprise x86.
I'm having an issue with my tower that I built and I'm wondering if starting with a fresh OS installation will do the trick. My current setup is one hard drive for nothing but the OS and programs and multiple other drives to save files to. My issue is that I use the Windows Backup utility to backup the drives that contain important information. If I were to install a fresh copy of the OS, I imagine that the system wouldn't realize that I've performed a backup on the other drives before and would want to do a complete backup all over again rather than being able to do an incremental backup. Is there a way to backup the settings and log files of the Windows Backup utility to move to the new OS? The drive letters and everything else will be the exact same as they are right now. This also makes me curios of how other backup programs behave when the OS has to be reinstalled.
is it possible to move win 7 home premium 32bit from my current computer into a new one onto an ssd (the ssd will be brand new and have nothing on it) and then upgrade it to 64bit?
becuase the new motherboard has UEFI (Gigabyte SKT-1155 Z77-DS3H ) i was thinking if i may be able to do the UEFI bootable usb drive tutorial UEFI Bootable USB Flash Drive - Create in Windows then install with that but im not sure how i would upgrade to 64bit in that process or if it will even work. UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with and i also want a fresh install but would like to keep some of the files on my system like steam games, skype etc.
I currently have a MacBook Pro running MacOS 10.4.somethingsomething.I also use BootCamp to dualboot into Windows 7 64bit Ultimate version.Here is where i could really use your help & advice:I am planning on building my own PC this holiday season and, since i am a college kid on a budget, i would rather not have to spend the $100 or so to purchase another copy of Windows. Therefore, I am looking to transfer my entire OS (files, drivers, and all) to this new system. What would be the easiest way to do this?Here is my thought process so far:
1. purchase a 500GB+ external Hard Drive
2. back up (create an image of) my current Windows partition onto said drive
3. assemble new computer and restore the image from the external Hard Drive (this is the step i am most unsure of how to proceed!!)
Could you guys let me know if totally off-base here as far as how to complete this task as painlessly as possible?
- Macrium Reflect - EaseUS Disk Copy & Todo Backup - RoboCopy - Paragon Backup & Recovery
I'd like to move Windows from one drive to another without backing up THEN restoring. This is an extra step that I consider unnecessary.RoboCopy ALMOST did it correctly. But it corrupted the Outlook Registry. Microsoft recommended to uninstall and re-install Office.
have an old 250GB HD with XP PRO on it and ALL my programs.
I have a NEW PC with win 7 PRO, now I want to ad the XP drive to the win7 box and boot ether from XP or Win7 from the boot screen (select ether XP OR Win7). I have google for hours all I was able to find was information on ONE Drive and then portion it and reinstall an OS.
I do not want to portion anything or reinstall any OS I just would like to DUEL BOOT. Both HD are Sata Drives. I do not have Win7 CD as it is in on the recovery portion. I would like to know what files are needed and were to put them (what Drive) in order to duel boot.
Why does it takes too long to start web cam from web cam central,i have to adjust the screen lid multiple times,and always need to press web cam portion.I had removed the lid frame,to check the web cam,for looseness,but everything looks normal.
My wife has Windows 7 Pro 64-bit installed on an old clone desktop. I bought new parts and have built her a screaming new desktop PC, but when I tried to do a restore from the old to the new, it failed. I figured, okay, I am moving from an Intel dual core environment to an AMD quad core with a completely different chipset, so it's making Windows gag. I bought another copy of Windows 7 Pro 64-bit, since I am going to rebuild the old machine later, and installed it on the new PC. Now it seems I am going to have to reinstall and reconfigure every program that is on her old PC. What a drag!
She has many programs and customizations, such as Fruity Loops, the GIMP, the Sims 3, MS Office 2007, Blender, and many others. Most - not all - of the data files on the old PC are on a separate partition, and I have successfully "restored" it to the new system. However, Fruity Loops and some other programs insisted on using the C Drive's user/documents folder for all their data, and Fruity Loops even uses system folders for some of her music files! It's a buggy way to do things, but it's her favorite music creation program, so I am duty-bound to get it transferred.
My new laptop running Windows 7 Professional and it is not easily recognizing other workgroup computers. When, and if, it does, it does not staying connected to other computers and a wireless printer on my workgroup.I have a desktop that is running Windows XP Home. It is sharing its printer and external hard drive to all computers in the workgroup. When I got on the router, I was able to get the Windows 7 machine to see XP box long enough to map a drive and load the printer. After rebooting, Windows 7 did not recognize the drive map or the printer. I pinged the XP box and got Destination Host unreachable. The only thing I can ping is the router. Also, when I went to load the wireless printer (with Windows 7 drivers) it did not see the printer even though the printer�s connection light is on. I have two Vista Business machines and one Windows 7 Home computers in my workgroup. These are not having any problems. From those other machines, they can ping each other but they cannot ping the new box.It is acting like a setting in Business has it isolated itself and is not allowing traffic. I have searched this problem and it seems to be common but I have not seen a post addressing the Business question. I have tried everything that the help files and forums stated (setting discovery, disabling IPv6, disabling firewall on both, uninstalling virus protection, etc.) with no result. Is there a setting in Business that would prevent it from being visible?
I'm trying to move my Windows 7 to a bigger and better hard drive.
My original idea was to create a system image and restore it to a different hard drive with windows repair (after all, this is what you would do after a hard disk failure). However, it only allowed me to restore the image to the original hard drive.
I wish to move email messages from one Windows 7 computer to another using easy transfer. Can someone tell me exactly what I need to tick to do this? The 'new' computer already has Windows Live Mail in use.
I'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.