Possible To Move XP Backup To RAID 0 Drive
May 29, 2012
Just wondering what or if I could move an xp backup onto a raid 0 drive. I did setup the drives in raid in the bios, and they show as raid. I booted into my marcium backup and ran my xp backup onto the drive, that showed in marcium as a raid 0 drive. When I booted, which went fine, into xp it shows in disk management as raid 0. But the problem is, it shows two drives, together and the 2nd drive as being un partitioned. Therefore I'm only running on one drive. Is this fixable, or do I need a clean install?
View 2 Replies
ADVERTISEMENT
Jan 5, 2013
until recently I had an XP PC with a single main OS IDE HD. To backup I performed monthly an Acronis clone to an identical 2nd IDE HD that I bought for this purpose. Easy.
Now I have a Windows 7 PC with two identical SSD's in RAID0 as main OS drive and a 2nd internal HD. I would like to perform a backup of this system so that I can later restore it to any HD configuration I choose (for example a single SSD, or a single HD, etc). Is this possible or the restore will need to be done to the same original configuration (two SSD's in RAID0+2nd int HD)? What would be the simplest software that will accomplish this?
View 4 Replies
View Related
Feb 3, 2012
how do i move my backup files from my external hard drive called a network to my pc
View 1 Replies
View Related
Nov 7, 2012
I would like to come up with a way to provide a full backup computer to my customers (offline, process control application). Currently doing this with WinXP and a hot-swap RAID-1 enclosure. If anything in computer1 dies, can quickly move the cables and the drive over to computer2, boot up and keep running. Now moving to Windows 7, more strict activation issues. Getting a separate windows license for each computer is not a problem, but how to either change the license key easily after the swap, or avoid activation altogether? Typical system is offline, possibly abroad and would like to make the failover as easy as possibly for customers.
View 9 Replies
View Related
Feb 16, 2011
I have read of problems using RAID 0 for video editing and I have my OS Windows 7 Professional on two WD FAEX 1TB drives in RAID 0. I have decided I want to Put the OS on one of the drives and use the other for media storage. I want to do away with the RAID configuration. Do I need reformat both hard drives, change BIOS setting in ASUS P6T Deluxe v2 motherboard and do new reinstall of Windows Pro OS? My goal is to do video editing with Vegas Pro 9.0 Intel i7 920, 2.66Ghz, 12GB Corsair RAM, 6 X 2GB, 850W Corsair pwr supply, NVIDIA Quadro FX1800 video card and HT OMEGA Striker 7.1 sound card in Coolermaster 600 case. Working fine now. Would like to make changes without messing everything up.
View 7 Replies
View Related
May 28, 2012
I have big file (133Gb) backup file on my hard drive and I wanted to move this to external hard drive (Seagate FreeAgent GoFlex Drive). When I tried it to move or copy to the external I've got message: Error 0x8007045D: The request could not be performed because of an I/O device error. I was looking online for some help and I found some advice that I have to make chkdsk in cmd mode but when I tried I've got message: "Chkdsk" is not recognized as a internal or external command, operable program or batch file. I don't know how to solve this problem. Can someone help me? My OS is win 7 Enterprise x86.
View 5 Replies
View Related
Feb 13, 2012
I was contemplating using a Raid 0 array as my primary C: drive with OS. I understand all the issues with that and do regular daily backups. I used to use Acronis which had no trouble with a raid array. But on this new build I was wondering if the built in backup tools would be able to image and more importantly restore my data to the array. My back up drive is not part of the array. I would guess that it would see it just fine from the OS and have no trouble creating the backup image, I am more concerned that if I had to use the rescue disk and reload the image whether or not the array would be visible to the restore disk.
View 8 Replies
View Related
Mar 17, 2011
I purchased a larger external hdd for my Win 7 Backup. I would like to move or copy the existing Win 7 Backup/Restore files to the new external hdd to freeup the old external drive for other data. Do you just copy the Backup folders on the old hdd to the new drive? Strangely, the Win 7 Backup folders' properties show zero bytes. I have restored files / folders from the Backup files, so I know they are not empty.
View 9 Replies
View Related
Oct 20, 2012
I'm having an issue with my tower that I built and I'm wondering if starting with a fresh OS installation will do the trick. My current setup is one hard drive for nothing but the OS and programs and multiple other drives to save files to. My issue is that I use the Windows Backup utility to backup the drives that contain important information. If I were to install a fresh copy of the OS, I imagine that the system wouldn't realize that I've performed a backup on the other drives before and would want to do a complete backup all over again rather than being able to do an incremental backup. Is there a way to backup the settings and log files of the Windows Backup utility to move to the new OS? The drive letters and everything else will be the exact same as they are right now. This also makes me curios of how other backup programs behave when the OS has to be reinstalled.
View 2 Replies
View Related
May 25, 2012
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies
View Related
Nov 1, 2010
Is there a way to use Windows Backup to backup to a network drive?
View 6 Replies
View Related
Jan 10, 2013
How can I move programs and files from my ssd boot drive to my data drive (Windows 7 x64 PC)?
View 3 Replies
View Related
Oct 21, 2011
I'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
View 4 Replies
View Related
Sep 28, 2009
I recently built a computer with only one drive, I was wondering if it is possible to install another one and have them runing on raid 0 or do you suggest another type of raid maybe with 3 drives.
I have an asus mobo p5q3 so I can use Drive Xpert technology but a lot of reviews says that the speed of the drives is split in two when using these 2 sata connection (white and orange).
View 9 Replies
View Related
May 30, 2011
I just purchased a new 10,000 RPM VelociRaptor drive and I'm going to use it as my OS drive. Is it possible to set up a RAID 0 with my current drive (hitachi 1TB 7200RPM) without having to format it?
View 7 Replies
View Related
Oct 27, 2012
I am doing a quick windows build here on a couple of computers and want to RAID 1 the windows C drive. The motherboard i got for them does not support RAID (I kinda figured it would). So now i was thinking of just doing a software RAID in windows. I got the C drive to mirror each other in disk management but the issue seems to be booting. When the computer starts it asks which hard drive i want to boot from and when i simulate hard drive failure the boot manager doesn't come up at all and i am stuck with the no boot device error. My guessing is that there is something on the 100MB system partition that isn't copying over.
View 5 Replies
View Related
Nov 20, 2010
My PC is currently using a single RAID 0 drive that contains my Windows install and all my data in a single partition C: (I'm well backed up so happy with the risk of RAID0)
The RAID0 drive is setup by my motherboard controller so Windows just sees the one drive.
I am thinking of adding an separate drive for windows, hopefully an SSD. I would like to do a fresh install of Windows 7 on the new disk then rename the old RAID0 drive to something different such as D: . Then reorganise it into just a data disk.
My question is.. will the new Windows 7 installation just see the old RAID0 disk as another disk? I know this would work witha normal disk, but does RAID0 transfer over to a new installation ok?
View 1 Replies
View Related
Jun 17, 2012
I have an HTPC that I've had for about 4 years now. Today when I booted it up it went into an infinite loop with the 'Startup Repair Utility" where it would just sit there claiming to be repairing the drive but never actually completing or providing a notification of the issues (typical Microsoft troubleshooting). Anyway, I finally was able to get into the advanced settings of the utility and get to a command prompt and see what was going on.
1)The previous RAID 1 configuration was setup as the main C: drive with the OS and also where I had all our music stored. But now during the boot sequence the bios startup it flashes in red complaining about the RAID array having degraded and when I finally got into a command prompt it was no longer mapped to C:, the two drives in the array were mapping independently as drive E: and F: respectively (the DVD-ROM is the D: drive).
2)My first concern was to get my music off it so I plugged in an external USB drive and went into command prompt and tried to xcopy from E:, it started to copy then failed catastrophically with a weird error so that would appear to be the bad drive. I then tried the same thing on drive F: (the mirror) and its cranking along nicely copying all my music over. My fingers are crossed but I suspect I'll be OK, its unlikely to get two drive failures in the same array at the exact same time
Once I get my data off the good drive how should I proceed? I assume I need to get a new duplicate drive installed and then can I not rebuild the RAID array from the good drive? I've never done this before, the machine came built for me so I'm not familiar how it is setup. What I do know is that it has a 'RAID utility' you can jump into at boot up by hitting F10.
View 2 Replies
View Related
Aug 1, 2009
I'm trying to install Windows 7 64-bit on my brand new custom PC, using a RAID0 drive array. I already set the array in the BIOS, and the BIOS sees it. All shall be going to plan...
Nope.
The beginning of the install goes fine, I accept the Terms and all that good stuff, it's loading files, yadadada.. but when it gets to the part where it's asking me where Windows 7 is asking me what drive it should be on, nothing is there. It asks for drivers (my SB750 RAID drivers) so it can find the drives, I put in my USB flash drive with the RAID drivers (I tried both from disk and website), it tells me that no new devices could be found.
I don't think it's a problem with my physical computer, So it's either that I messed something up in the BIOS or Windows 7 is being picky on it's RAID arrays.
View 2 Replies
View Related
Jan 15, 2013
I am about to reformat my hard drive, long story as to why, but I am starting from scratch. I know how to install windows, drivers etc. But one thing I am not sure about is configuring the RAID, as I wasn't the one who did it when we installed everything. I am asunming that when I reformat the RAID will need to be reconfigured? I have RAID 5 with three hard drives, each 500 GB. I have a program called Intel Rapid Storage Technology that "manages" the hard drives,but if I am correct I have to set up RAID before installing windows. How to configure the RAID the same way I currently have it? This is a homebuilt comp, i7 930 2.8 ghz, 6 GB RAM, Windows 7 Pro 64-bit, Gigabyte motherboard...
View 1 Replies
View Related
Feb 10, 2012
My Laptop came with Raid 0 over 2 one terrabyte harddisks. Last week i started getting Drive 1 at risk message. I looked it up and it turns out that this message occurs some time before your drive fails.I did a Full computer backup using windows Back up utility using an external Hard drive. Now I'm going to buy a new internal Hard drive to replace the faulty one.What are the steps i have to do to back up properly?After some search,I learned that:
1_ Backup everything.
2_ Replace Faulty drive.
3_ Rebuild Raid 0 array.
4_ Restore the system image.
Does the new internal Hard drive have to be the same brand/type/size as the old Faulty hard drive? Also I've never used Raid, so how do i recreate a new raid 0 array ? From Bios ? Should i create a repair disk too ? or would Windows dvd work?
View 1 Replies
View Related
Jan 3, 2013
RAID-1 DRIVE PULL OUT TO TRANSFER ...
I have a pair of mirrored RAID-1 drives (these have been removed and sitting as is for about 6months or so)
There is no important data on this that im concerned about preserving.
What i want to do is reformat them into 2 separate single storage HDD'safter installing them into my new system. or will it mess up my new system?
View 2 Replies
View Related
Nov 13, 2009
I installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
View 6 Replies
View Related
May 17, 2011
I am installing Windows 7 pro 32 bit on a machine with no floppy drive.The mobo is Asus p5b and intel e6600 core 2 duo cpu.how can i get raid drivers on to machine without floppy drive.can i use usb pendrive? or can i install driver after i have installed Windows 7 pro?
View 3 Replies
View Related
Dec 16, 2011
I have used many cloning software.
- Macrium Reflect
- EaseUS Disk Copy & Todo Backup
- RoboCopy
- Paragon Backup & Recovery
I'd like to move Windows from one drive to another without backing up THEN restoring. This is an extra step that I consider unnecessary.RoboCopy ALMOST did it correctly. But it corrupted the Outlook Registry. Microsoft recommended to uninstall and re-install Office.
View 4 Replies
View Related
Nov 17, 2012
I have a folder called PICS with a bunch of sub-folders
[code]...
If I copy the PICS folder over to the USB drive and keep the same directory structure, is there an easy way to update all of the shortcuts so the files can be accessed when the drive is plugged into another computer?
View 1 Replies
View Related
Dec 19, 2011
have an old 250GB HD with XP PRO on it and ALL my programs.
I have a NEW PC with win 7 PRO, now I want to ad the XP drive to the win7 box and boot ether from XP or Win7 from the boot screen (select ether XP OR Win7). I have google for hours all I was able to find was information on ONE Drive and then portion it and reinstall an OS.
I do not want to portion anything or reinstall any OS I just would like to DUEL BOOT. Both HD are Sata Drives. I do not have Win7 CD as it is in on the recovery portion. I would like to know what files are needed and were to put them (what Drive) in order to duel boot.
View 3 Replies
View Related
Nov 5, 2012
how to move windows 7 to d drive It is in c drive right now
View 2 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Aug 24, 2012
I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies
View Related
Jul 16, 2012
I have set up a dual boot- Windows 7 pro & XP ultimate, both on separate SSD's, all OK. I also have two 3TB HDD's set up under windows 7 RAID, all OK. In XP under drive management the RAID drives show up twice, once as 775GB unused drives with no drive letter allocated and also as 2.7GB RAID drives with status 'failed', drives marked as 'missing'. Is there a way I can get the RAID drive accessible under XP?
View 8 Replies
View Related
