Installing Win 7 RC On A RAID Drive Array
Aug 1, 2009
I'm trying to install Windows 7 64-bit on my brand new custom PC, using a RAID0 drive array. I already set the array in the BIOS, and the BIOS sees it. All shall be going to plan...
Nope.
The beginning of the install goes fine, I accept the Terms and all that good stuff, it's loading files, yadadada.. but when it gets to the part where it's asking me where Windows 7 is asking me what drive it should be on, nothing is there. It asks for drivers (my SB750 RAID drivers) so it can find the drives, I put in my USB flash drive with the RAID drivers (I tried both from disk and website), it tells me that no new devices could be found.
I don't think it's a problem with my physical computer, So it's either that I messed something up in the BIOS or Windows 7 is being picky on it's RAID arrays.
View 2 Replies
ADVERTISEMENT
Aug 5, 2011
I had a successful raid 5 array setup. It was assigned to g and while I was installing ps3 media server and then java it lost it's drive assignment. It shows up under disk management but asks me to initialize it. I really don't want to do that because it will format and i will lose the data on the volume. What else can i do to get my array to show up in windows with my data intact?
View 4 Replies
View Related
May 9, 2012
So i have windows 7 installed on one 120g ssd and i want to take the OS and put it on a raid 0 array using two of the same 120g ssds. Whats the best way i can acconplish this?note, the ssd the os is already on will be one of the ssds used in the array
View 3 Replies
View Related
Sep 27, 2012
how can i get past the 2 tb limitation on win 7 so that i can run a 0 raid array?
View 2 Replies
View Related
Jun 11, 2011
I would like to get 2 SSDs and put them into a raid array using Windows 7-64bit, but wanted to make sure I understand how to do that. The 2 SSDs will be the only drives in the system. My computer has an X58 motherboard with an ICH10R. Here is what I think is the correct procedure: Boot into the bios. Set the storage config to RAID (the other choices are IDE and AHCI) Reboot and hit Cntrl-I to get into raid menu during boot. Set up the raid array in the setup screen. Reboot to the Windows 7 install CD and install Windows Is this correct? Are there any other steps I need or tips I should be aware of?
View 9 Replies
View Related
Jul 8, 2011
I have a 6TB raid array consisting of 2 3TB drives. I have the latest Motherboard with EFI bios. The Intel RST utility allowed me to set up this array, and it says it is bootable. I would like this to be my C: drive.
How can I get Windows 7 to install and boot from this array.
View 21 Replies
View Related
Dec 24, 2012
In a new build I'm trying to create a RAID 1 array with two 1TB drives. The drive mode is set to RAID on the Motherboard, and I was able to successfully create the RAID within the Intel Rapid Storage BIOS. Once booted into windows, in the Intel Rapid Storage Technology Window it says recognizes that the RAID is there and says the status is normal. It has been initialized through this program also (although i have read that there is no need to initialize for a RAID 1). In Disk Manager I can see my SSD that windows boots from, and 1 WD 1TB drive (There is 2 there though, but this makes me think that it sees that its a RAID) and it shows it as unallocated space. In "My Computer" the only drive i can see is my SSD. So i guess my question is what do i need to do to make Windows see the RAID in "My Computer"? This is my first RAID build so im new the the RAIDing world.
System Specs:
Gigabyte GA-Z77X-UD3H
Intel 335 (OS Boot Drive)
2X WD Caviar Black 1TB HDD (For RAID)
View 1 Replies
View Related
Apr 27, 2011
Last year sometime, my install and all that went flawless, I put Windows 7 64 bit pro on a fresh drive, let it format and install as it wanted, zero problems. Boot drive was alone in the PC, its a WD black 320, I dont have the model or part number in front of me, but it seems to be a solid drive. The PC is a built clone, using Asus mobo and AMD dual core, spec's are in my profile if anyone needs to look that up, basically I don't see any of that mattering in my problem but there you go.added a promise RAID card last night, using an existing array from a previous build, and the system worked great and booted great once. I thought I was home free, but rebooted just to check since I have so little faith in PC's until they work twice, and sure enough I get hung at the glowing windows screen if this card is installed.I have read all I can here on this, and have been thru much troubleshooting... BIOS is fine, boot drive reads fine... the card and its fast track utility see the array fine... all those drives recognize just fine... the problem as I think today is, with the new array in place, windows can't figure out where to boot.
The old array was bootable years ago, so there is probably an MBR on it? I'm guessing a little at this point, but I used to boot to that array but went away from that years ago... since then, and I think I was on win2k back then, but adding an fresh hdd then, and since moving to XP, nothing ever cared... forward to today, Windows 7 does not like this array being in the mix, thus it hangs at the glowing window screen (the starting windows splash where the happy color balls form the win logo)remember, this was all up and running once, so that should eliminate a bunch of trial and error on bad drives, bios issues, and driver stuff... i have been thru the ringer with promise, and they swear the driver is good and is WQHL certified and all that... pulling the RAID card out lets me boot normally, so the hang up is definitely with the presence of this array the catch?? while my boot was C: to begin with, before i ever put the raid in, I put in another solo hdd... i backed up all my pictures to it.. and just before doing all this, noticed that while my C drive and E drive were all legit letter wise, looking in the disk manager, the E drive was listed as disk 0, and the C drive was disk 1... this wasn't a problem at that point, but makes me wonder why on earth the boot drive isn't device 0.
View 8 Replies
View Related
May 31, 2011
Running Windows 7 Ultimate x64. I have setup a partition which I transfered from on drive to another and now my boot partition is on an SSD Raid array connected to an LSI 9260 controller. If I boot the computer with the RAID Array first, the computer will just hang there. No message no nothing after the Verify DMI success message. If I setup my computer to boot from CD first and the the RAID Array second and with a bootable CD in the drive, the BIOS will display the "Press any key to boot from CD" If I don't touch anything, then windows will load just fine when the boot sequence switches to the RAID Array.
View 3 Replies
View Related
Feb 13, 2012
I was contemplating using a Raid 0 array as my primary C: drive with OS. I understand all the issues with that and do regular daily backups. I used to use Acronis which had no trouble with a raid array. But on this new build I was wondering if the built in backup tools would be able to image and more importantly restore my data to the array. My back up drive is not part of the array. I would guess that it would see it just fine from the OS and have no trouble creating the backup image, I am more concerned that if I had to use the rescue disk and reload the image whether or not the array would be visible to the restore disk.
View 8 Replies
View Related
Jun 21, 2012
I am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:
Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM
I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?
View 3 Replies
View Related
Sep 10, 2012
I have just bought two brand new WD 500 GB RE4 HDD's and connected them coorectly for RAID 1. I have changed the BIOS and Pressed Ctrl+F to create the RAID and this has been successful. When installing Windows you obviously get to the aprt where you need to load the floppy drivers to locate the drives...
I have downloaded ever driver from the Gigabyte support drive and loaded them onto a USB, not one driver can be seen when the USB is "Browsed" too...
How important is it that the drivers are on a floppy, as I do not have a floppy drive or access to a floppy and drives. Also what driver should be downloading as I tried the 3.2.1540.17 one and that was not seen, so I just downloaded them all in an attempt for success.
View 9 Replies
View Related
Mar 15, 2012
I've got 2 2TB hdd running in a raid0 volume setup with Intel RST. I made a flash disk for the raid drivers. Then I go ahead and start the install of Windows 7, load the raid drivers, create a 1TB partition to install Windows 7 on and have a 3TB partition for storage and such. Installs windows no problem. When i restart the system windows boot manager appears with "0xc0000225 - The boot selection failed because the device is inaccessible"If i then restart the computer, i get windows error recovery screen, if i choose Start windows normally, it boots fine. If i choose repair, it just goes back to the 0xc0000225 screen. This happens every time i restart the computer.I've tried everything i can think of, such as changing the boot order in the bios and such.
View 1 Replies
View Related
Jun 19, 2012
Built a "super computer" with all the bells and whistles, did raid0 array OK installed Windows 7 ultimate on ssd 120GB drive.went to drive management found raid array, partitionnedit as 1 18TB drive without problem BUT when i tried to format it (quick since i suspect it may take days) and iwin sais failled to format drive.i will try to make a Loooong format and see what happens.
View 2 Replies
View Related
Dec 26, 2009
I have an Asus P6T SE Motherboard with 6gb RAM, Core I7 etc and 3 x Samsung 1.5tb disks. Purchased specifically for RAID config. I wish to RAID 0 2 of the disks and then use the third to back up data.
I initially set up the rig with RAID 5, it was a disaster for me (using the built in Intel sotrage manager) as I had a slight error and it was still rebuilding the array some 3 days later so I decided to cut my losses and go to RAID 0.
The problem I now have is that despite Windows 7 seeming to install correctly, when it comes to the reboot section (just before 'completing installation) the machine cannot find a bootable device!!! I am removing the USB key at this stage to stop it from starting all over again.
it reports 'reboot and select proper device, or select boot media etc'
I have already tried
- Destroying and rebuilding the array with different sizes in case Windows 7 struggles with large boot partitions
- Resetting BIOS to defaults
Even reverting to an IDE set up and this still wont boot!
Can you help guys, I cant see how the PC could have been corrupted at a pre OS level that would stop the disks from working as I have configured. But nothing would surprise me.
View 4 Replies
View Related
Feb 24, 2011
what drivers should be better to use when installing Windows 7 on Raid 0. Should I use the drivers that comes by default in Windows 7 or should I download the Intel Matrix Storage Manager drivers?
View 12 Replies
View Related
Apr 12, 2012
I have a machine with windows 7x64 installed on an SSD in AHCI. MB is MSI FXA990-GD80 with AMD raid controller. I don't think there are two different controllers like some MBs. I have decided to add a RAID 5 array (I am not interested in discussing the validity of RAID 5 or that I need to us a different form of backup). I'm using RAID 5 and booting to the SSD.When I enable RAID, Windows bluescreens on startup. I tried running the windows startup repair utility and adding the AHCI driver from AMD which then detected the drive/windows installation and attempted to repair something, but it seems to have done nothing.I then thought I read I could set the mode to RAID-UEFI and boot to the SSD and configure the raid in windows, but the only thing it boots to then is the UEFI shell. Do I need to configure a boot device there?
View 6 Replies
View Related
Dec 9, 2010
I'm currently using Windows 7 Professional and have 4 internal HD's set up in RAID. Current Setup: 2 - 500GB drives in RAID 0 2 - 500GB drives in RAID 1
I use the RAID 1 drives for backup purposes only. I have 3 partitions on Raid 0, named as follows: A:,B:,C: I have the OS (Windows 7) installed on C: partition and use the other two partitions on RAID 0 for data. Future Setup: I have just bought the Intel X-25 120GB SSD and would like to do a clean OS install on the SSD and still keep my RAID 0 and RAID 1 setup for other data.
Here's my question: 1. How can I install the OS on SSD without disrupting any data on the RAID 0 and RAID 1 HD's?
I would like to be able to install the OS on SSD and still have access to the data on my previous C: drive on RAID 0 (including the OS data). I want to delete the OS data on the RAID 0 HD from within Windows(on SDD) if that makes. Will that be possible?
I'm afraid of losing my RAID drives/data. I have read that I should unplug the RAID drives before I install Windows on SDD and then re-plug them again. Is there a particular order I should do that in? Will the BIOS recognize the old set up if I unplug/re-plug the old drives? way to install Windows on the single SSD without losing the existing RAID 0 & RAID 1 setup and data.
View 8 Replies
View Related
Sep 28, 2009
I recently built a computer with only one drive, I was wondering if it is possible to install another one and have them runing on raid 0 or do you suggest another type of raid maybe with 3 drives.
I have an asus mobo p5q3 so I can use Drive Xpert technology but a lot of reviews says that the speed of the drives is split in two when using these 2 sata connection (white and orange).
View 9 Replies
View Related
May 30, 2011
I just purchased a new 10,000 RPM VelociRaptor drive and I'm going to use it as my OS drive. Is it possible to set up a RAID 0 with my current drive (hitachi 1TB 7200RPM) without having to format it?
View 7 Replies
View Related
Oct 27, 2012
I am doing a quick windows build here on a couple of computers and want to RAID 1 the windows C drive. The motherboard i got for them does not support RAID (I kinda figured it would). So now i was thinking of just doing a software RAID in windows. I got the C drive to mirror each other in disk management but the issue seems to be booting. When the computer starts it asks which hard drive i want to boot from and when i simulate hard drive failure the boot manager doesn't come up at all and i am stuck with the no boot device error. My guessing is that there is something on the 100MB system partition that isn't copying over.
View 5 Replies
View Related
Jan 5, 2013
until recently I had an XP PC with a single main OS IDE HD. To backup I performed monthly an Acronis clone to an identical 2nd IDE HD that I bought for this purpose. Easy.
Now I have a Windows 7 PC with two identical SSD's in RAID0 as main OS drive and a 2nd internal HD. I would like to perform a backup of this system so that I can later restore it to any HD configuration I choose (for example a single SSD, or a single HD, etc). Is this possible or the restore will need to be done to the same original configuration (two SSD's in RAID0+2nd int HD)? What would be the simplest software that will accomplish this?
View 4 Replies
View Related
Nov 20, 2010
My PC is currently using a single RAID 0 drive that contains my Windows install and all my data in a single partition C: (I'm well backed up so happy with the risk of RAID0)
The RAID0 drive is setup by my motherboard controller so Windows just sees the one drive.
I am thinking of adding an separate drive for windows, hopefully an SSD. I would like to do a fresh install of Windows 7 on the new disk then rename the old RAID0 drive to something different such as D: . Then reorganise it into just a data disk.
My question is.. will the new Windows 7 installation just see the old RAID0 disk as another disk? I know this would work witha normal disk, but does RAID0 transfer over to a new installation ok?
View 1 Replies
View Related
May 29, 2012
Just wondering what or if I could move an xp backup onto a raid 0 drive. I did setup the drives in raid in the bios, and they show as raid. I booted into my marcium backup and ran my xp backup onto the drive, that showed in marcium as a raid 0 drive. When I booted, which went fine, into xp it shows in disk management as raid 0. But the problem is, it shows two drives, together and the 2nd drive as being un partitioned. Therefore I'm only running on one drive. Is this fixable, or do I need a clean install?
View 2 Replies
View Related
Jun 17, 2012
I have an HTPC that I've had for about 4 years now. Today when I booted it up it went into an infinite loop with the 'Startup Repair Utility" where it would just sit there claiming to be repairing the drive but never actually completing or providing a notification of the issues (typical Microsoft troubleshooting). Anyway, I finally was able to get into the advanced settings of the utility and get to a command prompt and see what was going on.
1)The previous RAID 1 configuration was setup as the main C: drive with the OS and also where I had all our music stored. But now during the boot sequence the bios startup it flashes in red complaining about the RAID array having degraded and when I finally got into a command prompt it was no longer mapped to C:, the two drives in the array were mapping independently as drive E: and F: respectively (the DVD-ROM is the D: drive).
2)My first concern was to get my music off it so I plugged in an external USB drive and went into command prompt and tried to xcopy from E:, it started to copy then failed catastrophically with a weird error so that would appear to be the bad drive. I then tried the same thing on drive F: (the mirror) and its cranking along nicely copying all my music over. My fingers are crossed but I suspect I'll be OK, its unlikely to get two drive failures in the same array at the exact same time
Once I get my data off the good drive how should I proceed? I assume I need to get a new duplicate drive installed and then can I not rebuild the RAID array from the good drive? I've never done this before, the machine came built for me so I'm not familiar how it is setup. What I do know is that it has a 'RAID utility' you can jump into at boot up by hitting F10.
View 2 Replies
View Related
Jan 15, 2013
I am about to reformat my hard drive, long story as to why, but I am starting from scratch. I know how to install windows, drivers etc. But one thing I am not sure about is configuring the RAID, as I wasn't the one who did it when we installed everything. I am asunming that when I reformat the RAID will need to be reconfigured? I have RAID 5 with three hard drives, each 500 GB. I have a program called Intel Rapid Storage Technology that "manages" the hard drives,but if I am correct I have to set up RAID before installing windows. How to configure the RAID the same way I currently have it? This is a homebuilt comp, i7 930 2.8 ghz, 6 GB RAM, Windows 7 Pro 64-bit, Gigabyte motherboard...
View 1 Replies
View Related
Feb 10, 2012
My Laptop came with Raid 0 over 2 one terrabyte harddisks. Last week i started getting Drive 1 at risk message. I looked it up and it turns out that this message occurs some time before your drive fails.I did a Full computer backup using windows Back up utility using an external Hard drive. Now I'm going to buy a new internal Hard drive to replace the faulty one.What are the steps i have to do to back up properly?After some search,I learned that:
1_ Backup everything.
2_ Replace Faulty drive.
3_ Rebuild Raid 0 array.
4_ Restore the system image.
Does the new internal Hard drive have to be the same brand/type/size as the old Faulty hard drive? Also I've never used Raid, so how do i recreate a new raid 0 array ? From Bios ? Should i create a repair disk too ? or would Windows dvd work?
View 1 Replies
View Related
Jan 3, 2013
RAID-1 DRIVE PULL OUT TO TRANSFER ...
I have a pair of mirrored RAID-1 drives (these have been removed and sitting as is for about 6months or so)
There is no important data on this that im concerned about preserving.
What i want to do is reformat them into 2 separate single storage HDD'safter installing them into my new system. or will it mess up my new system?
View 2 Replies
View Related
Nov 13, 2009
I installed a Rosewell RC-217 Raid card (Silicon Image Sil 3124 SoftRaid 5 Controller-- in Device Manager). The card installed well in Windows 7 64 bit. No problems in device manager.The problem starts when i plug the drive in then rebooted. The boot stops at the 'Starting Window' and hangs. If i boot into windows then plug the drive in all work well. Windows sees the drive and i gave it a drive letter. works great.Problem is i can't boot my system without un-pluging the drive.
View 6 Replies
View Related
May 17, 2011
I am installing Windows 7 pro 32 bit on a machine with no floppy drive.The mobo is Asus p5b and intel e6600 core 2 duo cpu.how can i get raid drivers on to machine without floppy drive.can i use usb pendrive? or can i install driver after i have installed Windows 7 pro?
View 3 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
