I have a machine with windows 7x64 installed on an SSD in AHCI. MB is MSI FXA990-GD80 with AMD raid controller. I don't think there are two different controllers like some MBs. I have decided to add a RAID 5 array (I am not interested in discussing the validity of RAID 5 or that I need to us a different form of backup). I'm using RAID 5 and booting to the SSD.When I enable RAID, Windows bluescreens on startup. I tried running the windows startup repair utility and adding the AHCI driver from AMD which then detected the drive/windows installation and attempted to repair something, but it seems to have done nothing.I then thought I read I could set the mode to RAID-UEFI and boot to the SSD and configure the raid in windows, but the only thing it boots to then is the UEFI shell. Do I need to configure a boot device there?
Last year sometime, my install and all that went flawless, I put Windows 7 64 bit pro on a fresh drive, let it format and install as it wanted, zero problems. Boot drive was alone in the PC, its a WD black 320, I dont have the model or part number in front of me, but it seems to be a solid drive. The PC is a built clone, using Asus mobo and AMD dual core, spec's are in my profile if anyone needs to look that up, basically I don't see any of that mattering in my problem but there you go.added a promise RAID card last night, using an existing array from a previous build, and the system worked great and booted great once. I thought I was home free, but rebooted just to check since I have so little faith in PC's until they work twice, and sure enough I get hung at the glowing windows screen if this card is installed.I have read all I can here on this, and have been thru much troubleshooting... BIOS is fine, boot drive reads fine... the card and its fast track utility see the array fine... all those drives recognize just fine... the problem as I think today is, with the new array in place, windows can't figure out where to boot.
The old array was bootable years ago, so there is probably an MBR on it? I'm guessing a little at this point, but I used to boot to that array but went away from that years ago... since then, and I think I was on win2k back then, but adding an fresh hdd then, and since moving to XP, nothing ever cared... forward to today, Windows 7 does not like this array being in the mix, thus it hangs at the glowing window screen (the starting windows splash where the happy color balls form the win logo)remember, this was all up and running once, so that should eliminate a bunch of trial and error on bad drives, bios issues, and driver stuff... i have been thru the ringer with promise, and they swear the driver is good and is WQHL certified and all that... pulling the RAID card out lets me boot normally, so the hang up is definitely with the presence of this array the catch?? while my boot was C: to begin with, before i ever put the raid in, I put in another solo hdd... i backed up all my pictures to it.. and just before doing all this, noticed that while my C drive and E drive were all legit letter wise, looking in the disk manager, the E drive was listed as disk 0, and the C drive was disk 1... this wasn't a problem at that point, but makes me wonder why on earth the boot drive isn't device 0.
I tried to install a One Touch 9320 USB Scanner and received "adding printer driver failed". The software is out there but I cannot connect make a connection to the scanner. All the wires are connected.
I have an Asus P6T SE Motherboard with 6gb RAM, Core I7 etc and 3 x Samsung 1.5tb disks. Purchased specifically for RAID config. I wish to RAID 0 2 of the disks and then use the third to back up data.
I initially set up the rig with RAID 5, it was a disaster for me (using the built in Intel sotrage manager) as I had a slight error and it was still rebuilding the array some 3 days later so I decided to cut my losses and go to RAID 0.
The problem I now have is that despite Windows 7 seeming to install correctly, when it comes to the reboot section (just before 'completing installation) the machine cannot find a bootable device!!! I am removing the USB key at this stage to stop it from starting all over again.
it reports 'reboot and select proper device, or select boot media etc'
I have already tried
- Destroying and rebuilding the array with different sizes in case Windows 7 struggles with large boot partitions
- Resetting BIOS to defaults
Even reverting to an IDE set up and this still wont boot!
Can you help guys, I cant see how the PC could have been corrupted at a pre OS level that would stop the disks from working as I have configured. But nothing would surprise me.
what drivers should be better to use when installing Windows 7 on Raid 0. Should I use the drivers that comes by default in Windows 7 or should I download the Intel Matrix Storage Manager drivers?
I'm currently using Windows 7 Professional and have 4 internal HD's set up in RAID. Current Setup: 2 - 500GB drives in RAID 0 2 - 500GB drives in RAID 1
I use the RAID 1 drives for backup purposes only. I have 3 partitions on Raid 0, named as follows: A:,B:,C: I have the OS (Windows 7) installed on C: partition and use the other two partitions on RAID 0 for data. Future Setup: I have just bought the Intel X-25 120GB SSD and would like to do a clean OS install on the SSD and still keep my RAID 0 and RAID 1 setup for other data.
Here's my question: 1. How can I install the OS on SSD without disrupting any data on the RAID 0 and RAID 1 HD's?
I would like to be able to install the OS on SSD and still have access to the data on my previous C: drive on RAID 0 (including the OS data). I want to delete the OS data on the RAID 0 HD from within Windows(on SDD) if that makes. Will that be possible?
I'm afraid of losing my RAID drives/data. I have read that I should unplug the RAID drives before I install Windows on SDD and then re-plug them again. Is there a particular order I should do that in? Will the BIOS recognize the old set up if I unplug/re-plug the old drives? way to install Windows on the single SSD without losing the existing RAID 0 & RAID 1 setup and data.
I'm trying to install Windows 7 64-bit on my brand new custom PC, using a RAID0 drive array. I already set the array in the BIOS, and the BIOS sees it. All shall be going to plan...
Nope.
The beginning of the install goes fine, I accept the Terms and all that good stuff, it's loading files, yadadada.. but when it gets to the part where it's asking me where Windows 7 is asking me what drive it should be on, nothing is there. It asks for drivers (my SB750 RAID drivers) so it can find the drives, I put in my USB flash drive with the RAID drivers (I tried both from disk and website), it tells me that no new devices could be found.
I don't think it's a problem with my physical computer, So it's either that I messed something up in the BIOS or Windows 7 is being picky on it's RAID arrays.
I had a successful raid 5 array setup. It was assigned to g and while I was installing ps3 media server and then java it lost it's drive assignment. It shows up under disk management but asks me to initialize it. I really don't want to do that because it will format and i will lose the data on the volume. What else can i do to get my array to show up in windows with my data intact?
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
I am going to be helping a friend who has an HP computer that has 4 primary partitions already. We need to add a 5th partition.
1. convert a partition to Extended and add logical partitions in it
2. Eliminate the System Reserved partition, mark the C: partition as active, and then run startup repair 3 times to recreate the boot files into the C: drive.Is this an accurate assessment, and if so, what are the tradeoffs of each method?I know that with #2 you would lose use of the system tools that are there, but a Win 7 Repair Disc would work for those purposes when needed.
I would like to add a USB 3.0 pci-e card to my system. There are several to choose from but none that I find have a 'header' to bring the USB to a port on my front panel. Those ports are now fed by the USB 2.0 header on my MB. I would sure be nice if I could have a USB 3.0 on the front.
Vista SP1 (Service Pack 1) was the last Windows Service Pack I am aware of that could be added (slipstreamed into the installation media) to the Windows Install DVD.Will I be able to "slipstream" Service Packs into my Windows 7 Home Premium DVD? Will I be able to purchase new DVD media with the new service packs added?
I am getting a new SSD for christmas. I will be installing Windows 7 Ultimate on it doing a fresh/clean install on a new drive. However, once that is done, I want to connect my old HDD (which was Windows 7 Pro) and get the images and stuff off of it, so I can format it and use strictly for sotrage. Is it going to cause a conflict? Is this even possible? I don't want to keep the OS on the old HDD. I plan on using that on a different computer.
I currently have a licensed Windows 7 x86 version installed on a desktop. I purchased a new SSD that I plan to use for the OS, Office, and some productivity applications. Games and media will remain on my existing 500GB hard drive. The hard drive currently holds my 32-bit installation of Windows 7. I want to install 64-bit Windows 7 on my new SSD and keep the data on my HDD.
Should I unplug my HDD when I install 64-bit Windows 7? If I plug in the HDD after installation will there be a conflict as to which OS should boot? I don't want to dual-boot or go back to x86, so I don't care about the windows installation on the HDD, just the data.
Should I keep my HDD plugged in with the new SSD and then install Windows 7 x64 to the SSD? Will that keep all of my HDD data intact?
I am replacing my motherboard with a Asus P8Z68 Pro and adding a Patriot Wildfire 120GB SSD. I will install Windows 7 Pro 64bit SP1 on the SSD. Windows 7 Home Premium 64 bit is currently installed on my WD 300GB drive and configured as my C: drive. Can I leave the WD HDD unconnected, connect my SSD and install the new Windows 7 Pro then connect the WD HDD and maintain a dual boot system for a while while making sure everything is working properly?Will the SSD automatically configure as C:After things are working can I just wipe the boot sector on the old HDD and leave the data intact?
I have to print a few dozen PDFs, each of which have between ten and one hundred pages each. The problem is, none of them actually reference their source, so when my boss reads them next to each other and piles them together, he has no way of knowing which ones came from which PDF. Is there a way I can add a "header" to the top of each page of a printed PDF, much like how when I add page numbers to a print job they go in the "footer"?I'm running Windows 7 and printing a PDF from Firefox. If it allows for more customizable print jobs I can print the PDF from Adobe Reader.
Is there any way to manually add a ocx file . For some weird reason my ip camera when I go and try and view the video - I do not get a pop up to install the ocx file .
My Windows 7 account has been set up without a password. If I try to add one, there are warning messages that I may lose stored passwords and something called EFS.Can I ignore these and add a password to the account?
I have a laptop with Win 7 Home Premium, and one user account with administrative rights. Now, I would like to add two standard user accounts. How would I do that?I have experimented with copying over User files and folders, but I have really no idea what I should copy, if anything at all.
I regularly download useful programs and archives etc and would like to be able to add and edit info that shows up when you hover your mouse over the file. Generally downloaded archives etc are not very descriptive and I would like to add stuff to help me remember why I downloaded it in the first place!
So my pc gets used a lot by other people and i have files that i don't want them to go through and ive been wondering how can you put a password on a certain folder ? i used to hide folders but i found it annoying , so does anyone know how to do it or a certain program that will help me . e.g i click on a folder and it gives me a pop up asking for a password to proceed?
