I am getting a new SSD for christmas. I will be installing Windows 7 Ultimate on it doing a fresh/clean install on a new drive. However, once that is done, I want to connect my old HDD (which was Windows 7 Pro) and get the images and stuff off of it, so I can format it and use strictly for sotrage. Is it going to cause a conflict? Is this even possible? I don't want to keep the OS on the old HDD. I plan on using that on a different computer.
Vista SP1 (Service Pack 1) was the last Windows Service Pack I am aware of that could be added (slipstreamed into the installation media) to the Windows Install DVD.Will I be able to "slipstream" Service Packs into my Windows 7 Home Premium DVD? Will I be able to purchase new DVD media with the new service packs added?
my compaq presario cq56-102sa runs for around half an hour and then crashes for no reason. it doesn't even say why it crashes. i have the original 2gb added onto my 4gb ram but i have no idea why it crashes and shuts down. i have an amd v140 processor 2.30 ghz and it says 6.00 gb is installed with nothing to relate to when it crashes. i have now found out that it might be because it is overheating so i put a fan right behind it to cool it.
Is it possible to install new voice in Windows speak. I want to use a speak function in Excel and the only voice that I got is "Michele" a female voice.
A win7 os was loaded with a user created that has support priviledges and not ADMINISTRATOR rights,this has made it impossible 2 do any administrative functions on the system.I have tried to activate the administrator without success
What should I do to "add" the patches (those KBXXXXXXX files) from Windows Update to ISO. Is there a way to "put" .NET Framework 4.0?
I guess that "add" is very relative term as I suppose, that the new .iso file can be created at the end of the process leaving the old .iso as it was.
What I mean I've seen terms like Windows Automated Installation Kit, imagex, sysprep, OOBE, but I can hardly figure how they works.
Now there is a huge problem. I had really difficulties with understanding stuff during reading numerous articles which were telling how to make similar things (or just my guessing told so). Here are some wild guesses:
1. Editing the original .iso file with some software, thus creating the new iso.
2. Making fresh installation of Windows 7 (whether by Virtual Machine or on real hardware). Enabling audit mode, but then I don't quite get it about Out of Box Experience (OOBE), set up the things I want to and by imagex(???) create the .iso of it?
3. Creating Win PE which will be (????) a background for "typical" Windows Installation?
Does this problem have something common with unattended installation?
How can I get all the fonts installed in win 7 over to my virtual environment? I have copied my font folder over there, but I still cannot see themI am absolutely desperate after this upgrade to Win 7! In have an urgent deadline using PageMaker 7 and I need to see the fonts there. Please, no abuse regarding the fact that I use PM. And my new pc can definitely handle the toll on memory and resources
I read the dual boot thread, with two hard drives. Just want to be perfectly safe. My wife doesn't like Win 7, I would like to install the XP drive from the previous computer. Both are sata, I have the XP drive in, but have not used an XP install disk. I don't want to lose data on either drive. My thoughts are to use XP on the new computer, and just copy any data from the Win 7 drive to a thumb drive, then to the XP drive. Eventually, the Win 7 drive could serve as backup, with Win 7 ignored. I do not have a Win 7 install disk.
Being someone who just completed a research-intense Masters degree, you'd think I would have thought of this a long time ago.Are there any ways to add a very obvious banner to the top of a folder that you can type in details/instructions/information about that folder? Something OBVIOUS and easy to see have piles of folders that all hold "similar" content, and I'd love to put a detailed description at the top of the folder that is very easy to see when you open a folder. If I can also add in a pop-up bubble when I wave the pointer over the folder with this info, so much the better.I want to be able to open a folder and see up at the top "Storage of archived items for sociology research regarding ethics and human rights from when I was a student at Noneya Business School at Wassamatta U"
So, I've added a second hard drive to my Windows machine and now it will not boot up. I added the new hard drive on SATA 3. The original is SATA 1, and my DVD is SATA 0. This is how it's always been; I've changed nothing else. I don't have any idea where to start fixing this. I have a dual boot with Ubuntu on the same SATA drive 1, and that boots just fine. I switched on the new hard drive in the BIOS, and flipped a few other options on and off to no avail.When the computer boots I choose the Win7 install. Then it will take me to a screen that asks me if I want to start windows normally, or do a disk repair. Starting normally gets you nowhere, it will just end up resetting the computer. Starting the disk check will do a scan for a few minutes and then ask me if I want to send an error report. Clicking yes or no doesn't seem to matter because after that the only option is to shutdown or reboot.When this first started I at one point had the option to do a system restore, but I didn't think it was necessary so I didn't. I no longer receive that option or I would try it at this point
I had to force shut down my new build(2 weeks old ). I hooked up a new monitor,plugged in an Oxygen Keyboard(piano) for the first time and tried to plug the keyboard(typing keybaoard ) into a usb port,which for some reason didn't work and then Windows 7 started searching for drivers and couldn't find whatever driver it was looking for. No, problem until I went to run aida64 and it froze on the opening page,I force quit it in task manager then tried to restart and it froze on"windows is shutting down".After I forced the shutdown by holding down the power button I restarted and everything seems to be cool,aida64 opened up ,programs seem to be responding. here's what the win 7 report said: roblem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional information about the problem: BCCode: 1000009f BCP1: 0000000000000004 BCP2: 0000000000000258 BCP3:FFFFFA8018B84660 BCP4: FFFFF80000B9C3D0 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:WindowsMinidump�71412-18610-01.dmp C:UsersGrantAppDataLocalTempWER-28236-0.sysdata.xml Read our privacy statement online: here is the zip of my dump file and system health report Attachment 221419?
Windows 7 adds the .jpg xtension to many of my files which are for example:
Adobe InDesign files Photoshop PSD files Camera RAW files Adobe PDF file
how I can prevent Windows from doing this? I archive my files according to the program they are created in and I need to keep all my with file original xtension.
I use adobe bridge so I do not need to view the contents of my files in any Windows Explorer window.
Last year sometime, my install and all that went flawless, I put Windows 7 64 bit pro on a fresh drive, let it format and install as it wanted, zero problems. Boot drive was alone in the PC, its a WD black 320, I dont have the model or part number in front of me, but it seems to be a solid drive. The PC is a built clone, using Asus mobo and AMD dual core, spec's are in my profile if anyone needs to look that up, basically I don't see any of that mattering in my problem but there you go.added a promise RAID card last night, using an existing array from a previous build, and the system worked great and booted great once. I thought I was home free, but rebooted just to check since I have so little faith in PC's until they work twice, and sure enough I get hung at the glowing windows screen if this card is installed.I have read all I can here on this, and have been thru much troubleshooting... BIOS is fine, boot drive reads fine... the card and its fast track utility see the array fine... all those drives recognize just fine... the problem as I think today is, with the new array in place, windows can't figure out where to boot.
The old array was bootable years ago, so there is probably an MBR on it? I'm guessing a little at this point, but I used to boot to that array but went away from that years ago... since then, and I think I was on win2k back then, but adding an fresh hdd then, and since moving to XP, nothing ever cared... forward to today, Windows 7 does not like this array being in the mix, thus it hangs at the glowing window screen (the starting windows splash where the happy color balls form the win logo)remember, this was all up and running once, so that should eliminate a bunch of trial and error on bad drives, bios issues, and driver stuff... i have been thru the ringer with promise, and they swear the driver is good and is WQHL certified and all that... pulling the RAID card out lets me boot normally, so the hang up is definitely with the presence of this array the catch?? while my boot was C: to begin with, before i ever put the raid in, I put in another solo hdd... i backed up all my pictures to it.. and just before doing all this, noticed that while my C drive and E drive were all legit letter wise, looking in the disk manager, the E drive was listed as disk 0, and the C drive was disk 1... this wasn't a problem at that point, but makes me wonder why on earth the boot drive isn't device 0.
My google-fu is failing me and I can't seem to find any solution before I return some of my new hardware. I just picked up and assembled the PC. I unstalled Windows 7 64 bit ultimate without any issues. As soon as I add the Ceton InfiniTV4 to any PCI-E slot, I can't get past the loading operating system.
The Ceton card works fine in my other other PC with a Gigabyte board so I am guessing it is some conflict with something on the Z68 board. This is a fresh install with only driver updates, and Windows 7 updates.
It is my understanding that allowing the windows paging file to install on an SSD boot drive will cause the drive to wear out quickly. The recommendation seems to be to placing windows paging and perhaps other components on a mechanical hard drive while placing other parts of the Windows operating system on the SSD.
I think whats its more or less doing is every time wmp opens it goes trough my docs and music folders and it adds everything there, i don't want it to its all too messy for wmp to list properly..i've gone into tools and unchecked all the boxes but there dosn't seem to be an option to stop it adding local media.
My company is running several XP machines. All of these machines will need to have a hard drive added to them that will be imaged with our corporate Windows 7 image. How can I get the Windows 7 bootloader to recognize the XP install? We don't want to have to use a 3rd party app such as EasyBCD. We would like to create a batch file that utilizes the capabilities of bcdedit.exe to modify the bootloader so we can repeat the process multiple times with out installing the 3rd party app. (plus, the boss doesn't want us using the 3rd party app).
This has been happening since the release of SP1 for Windows 7. I don't know if it is exactly that update, but it is one of them that causes a blockage of software adding menus to your context menu. The software that I'm having issues with is PowerISO and Unlocker.
This is a pain in the ass because now I have to restore to before SP1 was installed and it takes forever to reinstall SP1 with updates.
I have installed all Microsoft Visual C++ 20XX Redistributable Packages and Microsoft Visual C++ 20XX Redistributable Package SP1 downloads.
I have a Kodak ESP 5250 printer attached to an XP machine - and have a Windows 7 machine that functions well on the network with the XP machine otherwise, but when I attempt to add a network printer to the Windows 7 machine (the printer is the Kodak mentioned above) I receive the error message above 0x0000000d.
I run Windows 7-64 and need to install XP. I made a space, and booted from the XP CD. After it loaded files, when starting, it crashed. I read on a forum I need to set the drive to compatibility mode (called legacy in my setup). It warns my OS may not boot.What should I do? I'm afraid to change the drive setting and have Windows 7 not boot. But I need to get XP working. I do have two drives. Second is a backup, I could install XP on that, and set the second drive to legacy, and leave my primary drive's current settings.
This week, I encountered the following strange problem for which I haven't found a final solution so far, though I have found some bandaids. But having a complete solution -or at least a reason why this problem occurs- would be great:I have a working installation of Windows 7 Professional x64 in UEFI mode. The main disk, SSD #1, contains the following partitions (using GPT): ESP, MSR, system, data. An additional disk, HD #2, with a single data partition (using MBR) is also attached to the system. With this setup, everything works fine.Now, after adding another disk, HD #3, to the system -my old system disk (bootable, using MBR, one active primary partition and an extend partition with three logical disks)- Windows will no longer boots completely: The boot process begins, the Windows logo is shown. Then, a message is shown in text mode "Windows is loading files" with a loading bar. After a while the boot process stops and I am dropped into the EFI shell. After removing the offending HD #3, Windows boots normally again.
I tried removing HD #2 and only attaching HD #3 together with SSD #1, but this yielded the same problem. Using SSD #1 by itself works fine though. Booting from a Linux live-cd works without problems. All disks and partitions are found and can be mounted. There, I erased the disk signature from the offending HD #3 and now Windows was able to boot and also found all disks and partitions correctly. But after a reboot the same problem reappeared
My OS of choice back then was MS Windows, however after Windows XP I moved to OSX. About two years ago I knew I needed to get back involved with Windows and bought my Lenovo Laptop running Windows 7 Home Premium. I then installed Windows 8 Consumer Preview on a different partition and upgraded to Windows 8 Pro when it became available. I am now looking to install a distro of Linux and can't seem to find any information of doing so. I don't know which Windows partition it would be best to install it on 7 or 8. Also I understand that Ubuntu have a Windows Installer wubi, but I have heard horror stories after the installation. My main fear is losing Windows 7 or 8 and if the entire process is too risky I'll just leave it altogether. So I guess my question is has anyone installed a Linux distro on a PC which originally came pre installed with Windows 7 and then added Windows 8 to a partition?
I am going to be helping a friend who has an HP computer that has 4 primary partitions already. We need to add a 5th partition.
1. convert a partition to Extended and add logical partitions in it
2. Eliminate the System Reserved partition, mark the C: partition as active, and then run startup repair 3 times to recreate the boot files into the C: drive.Is this an accurate assessment, and if so, what are the tradeoffs of each method?I know that with #2 you would lose use of the system tools that are there, but a Win 7 Repair Disc would work for those purposes when needed.
I would like to add a USB 3.0 pci-e card to my system. There are several to choose from but none that I find have a 'header' to bring the USB to a port on my front panel. Those ports are now fed by the USB 2.0 header on my MB. I would sure be nice if I could have a USB 3.0 on the front.
I currently have a licensed Windows 7 x86 version installed on a desktop. I purchased a new SSD that I plan to use for the OS, Office, and some productivity applications. Games and media will remain on my existing 500GB hard drive. The hard drive currently holds my 32-bit installation of Windows 7. I want to install 64-bit Windows 7 on my new SSD and keep the data on my HDD.
Should I unplug my HDD when I install 64-bit Windows 7? If I plug in the HDD after installation will there be a conflict as to which OS should boot? I don't want to dual-boot or go back to x86, so I don't care about the windows installation on the HDD, just the data.
Should I keep my HDD plugged in with the new SSD and then install Windows 7 x64 to the SSD? Will that keep all of my HDD data intact?
I am replacing my motherboard with a Asus P8Z68 Pro and adding a Patriot Wildfire 120GB SSD. I will install Windows 7 Pro 64bit SP1 on the SSD. Windows 7 Home Premium 64 bit is currently installed on my WD 300GB drive and configured as my C: drive. Can I leave the WD HDD unconnected, connect my SSD and install the new Windows 7 Pro then connect the WD HDD and maintain a dual boot system for a while while making sure everything is working properly?Will the SSD automatically configure as C:After things are working can I just wipe the boot sector on the old HDD and leave the data intact?
I have to print a few dozen PDFs, each of which have between ten and one hundred pages each. The problem is, none of them actually reference their source, so when my boss reads them next to each other and piles them together, he has no way of knowing which ones came from which PDF. Is there a way I can add a "header" to the top of each page of a printed PDF, much like how when I add page numbers to a print job they go in the "footer"?I'm running Windows 7 and printing a PDF from Firefox. If it allows for more customizable print jobs I can print the PDF from Adobe Reader.
