So, I've added a second hard drive to my Windows machine and now it will not boot up. I added the new hard drive on SATA 3. The original is SATA 1, and my DVD is SATA 0. This is how it's always been; I've changed nothing else. I don't have any idea where to start fixing this. I have a dual boot with Ubuntu on the same SATA drive 1, and that boots just fine. I switched on the new hard drive in the BIOS, and flipped a few other options on and off to no avail.When the computer boots I choose the Win7 install. Then it will take me to a screen that asks me if I want to start windows normally, or do a disk repair. Starting normally gets you nowhere, it will just end up resetting the computer. Starting the disk check will do a scan for a few minutes and then ask me if I want to send an error report. Clicking yes or no doesn't seem to matter because after that the only option is to shutdown or reboot.When this first started I at one point had the option to do a system restore, but I didn't think it was necessary so I didn't. I no longer receive that option or I would try it at this point
My company is running several XP machines. All of these machines will need to have a hard drive added to them that will be imaged with our corporate Windows 7 image. How can I get the Windows 7 bootloader to recognize the XP install? We don't want to have to use a 3rd party app such as EasyBCD. We would like to create a batch file that utilizes the capabilities of bcdedit.exe to modify the bootloader so we can repeat the process multiple times with out installing the 3rd party app. (plus, the boss doesn't want us using the 3rd party app).
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
This week, I encountered the following strange problem for which I haven't found a final solution so far, though I have found some bandaids. But having a complete solution -or at least a reason why this problem occurs- would be great:I have a working installation of Windows 7 Professional x64 in UEFI mode. The main disk, SSD #1, contains the following partitions (using GPT): ESP, MSR, system, data. An additional disk, HD #2, with a single data partition (using MBR) is also attached to the system. With this setup, everything works fine.Now, after adding another disk, HD #3, to the system -my old system disk (bootable, using MBR, one active primary partition and an extend partition with three logical disks)- Windows will no longer boots completely: The boot process begins, the Windows logo is shown. Then, a message is shown in text mode "Windows is loading files" with a loading bar. After a while the boot process stops and I am dropped into the EFI shell. After removing the offending HD #3, Windows boots normally again.
I tried removing HD #2 and only attaching HD #3 together with SSD #1, but this yielded the same problem. Using SSD #1 by itself works fine though. Booting from a Linux live-cd works without problems. All disks and partitions are found and can be mounted. There, I erased the disk signature from the offending HD #3 and now Windows was able to boot and also found all disks and partitions correctly. But after a reboot the same problem reappeared
I'm running a custom built system, but want to add a used hard drive to the system so I can copy all of the old important files off it to the new hard drive. I had them all on an external, but the external failed a day or two after the backup, just my luck.Is there any risk in me just plugging in the second hard drive to a SATA port?
I have a dead laptop, I believe it was the hard drive, anyway. I took the hard drive out, connected it to my Network computer, all looks well, I heard it spinning (Good sign?) and then I booted the computer, it didn't actually load windows 7, it spent like a good 10-15mins saying "Loading windows 7" so I turned it off, moved the SATA cable to a different slot, it booted.. then when trying to detect the drive, it doesn't exist. I will need to format it, as it does have windows 7 on that drive aswell.
So i got my Liteon 524 DVD-DL writer this morning , and as soon as i got it , i shut the pc down and put the drive in , then when starting the pc again , it started working for about 5 seconds then shut down again , then in 4 seconds it started on its own again then shut down , during the 5 seconds when it started , all the fans are on and everything looks as if its working all right , but the monitor doesnt get any signal at all , i then tried to clean it with a blower and checking on the cables again , then tried booting it up , it started working and then shut down again like last time , but now it stays about 12 seconds instead of 5 , i also tried to remove the battery and return it again to reset the BIOS but nothing happened , tried booting without HDD or CD drives but still nothing ...
My Old HDD crashed, it had windows 7 on a D: logical drive with an extended partition (Not sure why/how I ended up with a D: logical drive and an extended partition, it probably happened when I upgraded my windows xp to windows 7 32 bit OR when I upgraded my windows7 from 32 bit to 64 bit, anyways.....). My old HDD also had two other primary partitions which probably had some system files etc,. I do not have a backup of these two primary partitions, however, I do have a paragon backup of my logical drive D: extended partition alongwith a backup of first track (not sure what that means). My old drive is bad. I got me a new HDD, created a new NTFS primary partition with a drive letter C:. I then restoed the paragon backup of my windows D: drive on to this new primary C: partition. Now, I am not able to boot windows 7. Seems like I need to make this new partition bootable and/or make it a system partition. Not sure how to do this. I dont want to install windows 7 from scratch and then load all the software programs.
I recently bought a new hard drive with windows 7 home premium 32 bit installed. When tried to install it in my pc it would not boot up, I am assuming its because everything is new to it. I bought a windows 7 recovery disc but it has not worked. I did not get an install disc with the new hard drive.
I have a dell dimension 9100. I have two drives on it, a ~160gb drive that came with it with xp, and a 500gb drive with win7. I put the win7 in myself and had been using that. Finally, I decided to erase the old drive with xp on to install linux on it. After erasing the old drive, my computer won't start up. It says it cant find sata 1 or 3. I've tried switching the cables hooking up to it but that doesn't help. If I push continue after it tells me how it can't find them, it says 'loading pbr for descriptor 2...done' and stays there. I did not erase windows 7,
I found another old hard drive, a Seagate 250 GB, and when I plug it to the pc, Windows is stuck at the Windows 7 logo at the boot, and the logo itself lags. the hard drive is detected in the BIOS. (can it be a virus on this old hard drive?)
I've recently purchased two 30GB SSDs which I have set up in a RAID 0 array and I have installed Windows onto these drives. I have a second, 2TB Seagate Barracuda Green HDD that I have used to put my user profiles and additional programs/games on as it wouldn't fit on the SSD.Everything was fine for a few days after installation. Then this morning I rebooted the computer and it just stalled on the flashing cursor (underscore) in the top left corner of the screen. I did the basic fixes (Windows repair, checking RAM) and nothing worked.Then I thought that I should try disconnecting all but the SSD with the OS on it. SUCCESS! It booted to Windows but couldn't find any programs/user data so it created a new "profile". I shutdown the computer and tried reconnecting just the data hard drive.I have two additional hard drives (used for backups) that don't affect anything at all when I plug them in.Does anybody know what could be the problem? I'm at a loss and I need the computer
I have a computer with two (IDE ribbon cable) hard drives. One had a bad windows XP installation on it. I installed Windows 7 on the other. I formatted the drive before installing Windows 7.Then, I decided I want to use the hard drive with the bad winXP installation on it, in another computer (I will format it). When I opened the computer side panel, I wasn't sure which hard drive was which, so I unplugged the power to one, and started the computer.The thing is, it won't boot Windows 7 with either of those hard drives alone, only when both are plugged in. With HD #1 disconnected, it says "Can't find BOOTMGR, press a key to reboot." With HD #2 connected, I get asked whether I want Windows 7 or an older OS, and when I choose Windows 7, I get an error message, something like "Windows 7 failed to start. To try and repair, insert install disc, or use recovery mode, etc" With both HDs, I get asked the same question, "Windows 7 or an older OS," but when I choose Windows 7, it works. In my computer, I have verified that Windows 7's files are on one disk, and corrupt winXP files on the other.
Recently I had a drive failure and I need to have an extra Windows 7 x32. The remaining drive a WD 320gb drive has a dual-boot Windows 7 and XP. How can I triple boot in just one hard drive?
On that particular system I am using Neosmart's iReboot/EasyBCD so when I want to boot to either of the former arrangment I can do that easily and not be bothered by the boot selection.
Now I am using ATI Home 2011 and I was planning to make recover an image from the drive that failed to a 3rd partition on the WD320gb drive. I really need to get this one going in the meantime I do not have the money to buy a new one.
My Windows 7 motherboard stopped working so I installed a new motherboard. The SATA hard drive is not recognized by the motherboard software or the Windows 7 installation disc. What the heck?
Intel E2180 CPU 2GB Ram Gigabyte GA-G31M-S2C Mainboard Seagate ST31000340NS SATA Hard Drive Connected on SATA0 Operating Systems: Windows 7 Ultimate 64Bit on HDD Windows 7 Ultimate 32Bit Booting from VHD
I Installed Windows 7 Ultimate 64Bit onto Hard Drive as Per Normal Installation Onto the Hard Drive and Installation created 2 Partitions (1 System PArt and Another for C: Drive) Everything Works Great.m I Then Installed Windows 7 Ultimate 32bit Into a VHD. Setup Created a Multiple Boot Entry into the BCD so that when I Boot it Prompt Which OS I Want, I then Used BCDEdit to Change the Descriptions of the Boot Options "Windows 7 Ultimate - 64Bit - HOST" and "Windows 7 Ultimate - 32Bit - VHD" Everything still works Great.. No Problems.. Been Like this for a While Now and Perfect.
Now the Problem is that I Need to get some Data From and Old SATA Drive. I Shutdown .. Plugin the WD1600AAJS (160GB) into Another SATA Port (SATA1).. Turn Machine on and Press Delete to Enter Setup for Bios.. Goto Set Boot Device Priority and Ensure that the ST1000340NS Drive is at the Top (1st Priority).. Exit and Save Settings.. PC Goes through POST and Then Will not Boot.. it Gives "Missing Operating System" Shutdown Remove WD1600AAJS Drive.. Boots Perfect.. Reattach WD 1600AAJS Drive and "Missing Operating System" Tried Using "F12 to Select Boot Option" during POST to Select Boot Device.. Choose ST1000340NS ... and Still same Issue.. Remove the WD1600AAJS and Boots No Prob Off the ST1000340NS.
I thought that maybe it was the WD Drive.. so Tried another Seagate Drive.. and Same Issue..
I have set Every Available Option on The Bios to Choose the Boot Device and NOTHING Works.. I have Even swapped HArd drive SATA Ports .. still no Difference.
I have an Idea there is a problem with the BCD but I Cannot Edit or Add any thing to the BCD as it will not boot with the second drive attached. And When you edit the BCD it need the second drive attached to be able to Add a BCD Entry.
I've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
Asus cm5570-ap006 originally running vista premium and owner wanted an upgrade to seven. Bought a new hard drive b/c old one died. Mobo had trouble finding new drive but, after setting bios back to default(F5) it installed and finally got working.Owner gets pc and starts getting blue screening and saying theres an f1 drive error and wont wake up after suspending without reboot.So I get it running fine by removing avg(which is causing blue screen for some reason) and the it is now waking up after auto hibernation. But if you put into hibernation manually it wont wake. I update windows and it goes back to not recognising hard drive.Flash bios remove cmos baterry reset bios to default and set hard drive to ahcpi and it reinstalls fine update windows and it stops working. Use restore point to get it back and running and this time dont update windows and its running ok again. Shut it down for the night and the next day go to boot it up and there is no bootable media and now I am trying to reinstall Windows 7 and after it does it gets a no bootable media error even though it is
I have a PC on which the hard drive died. I had previously done the Advisor and it said everything is OK for new install of Win 7 Home Premium.
I removed old hard drive and 2 gigs of memory (now 2 gigs installed) installed new hard drive, set appropriate ( i think) BIOS parms. When I start the DVD I get the 'loading files' message and the colorful logo then a blank screen with a large arrrow cursor -- and nothing. Wait 5, 10 15 minutes and the only hint of activity is the hard drive light is flickering about once every 2 seconds. I've now waited for over an hour and still nothing else.
I've tried to do all the things that have been suggested for others who have had problems but it hasn't helped. Machine is a Dell 4700C with 3.4 GHz processor , 2 gigs of memory, only keyboard, mouse, and monitor attached in addition to the hard drive.
I just restarted my PC and i kept getting erros regarding hardware, at first it would just hold at updating dmi pool , after i reset the bios to fail safe defaults it would then give me the I/O error. I noticed my external drive was turned off and I turned it on and windows booted fine. Is there a connection here i can disable?
Windows is installed on my SSD drive not my external.
my hard drive that runs my windows 7 wouldn't boot, so in the end I re-imaged it, and since then I have no sound. I updated my drivers, checked it wasn't muted in the bottom panel, changed my leads, tried different types of leads, directly attached it to my tv to ensure it wasn't a problem with the amplifier, went to ASUS's site downloaded the new drivers again directly from them, got a snazzy new aplication out of it but still no sound. Checked my graphics cards are in securely, checked they're showing up, updated those drivers, ran windows updates a few thousand times, ran mr fix it, he tells me that the speakers, headphones etc are not plugged in, but they are. At least that's what the good fellow told me before my asus driver update, I will check back with him after walking my dog.
I installed windows 7 on my computer that has two hard drives and I tried to remove the secondary drive ( it was used as storage) when I removed the second drive I was then unable to restart my computer. I tried to repair start up from the install disk (3 times) it did not work. when I plug the second drive I am able to start up again. I would like to remove the storage drive and replace with a larger. I bought a wireless seagate 2tb free agent goflex hard drive and wanted to put the 2 tb hard drive into the computer and take my 1 tb drive from the computer and use it in the wireless system.
So I've been collecting extra parts on the side for a while, and finally got around to throwing them all in a rig yesterday.[code] Now it boots fine and happy. I went to install windows from a dvd, the installer saw both hard drives but told me that "windows cannot be installed to this disk. this computer's hardware may not support booting to this disk" for both. Something about both of them saying that told me it wasn't something wrong with the hdds, especially because the 120gb one was fresh out of a antistatic bag that was sealed from the factory :. I went into bios to figure out why, and after looking around I found a utility called "Super Recovery". It basically allows you to manually put in a reserved system partition on the hard drive that windows usually automatically puts on your hard drive of like 100mb. I did that to the 120, and boom, windows allowed me to install onto it. Windows finished installed completely, and went to restart. My boot priority has always been Hard Drive -> then CD-ROM. The system trys to boot from the hard drive, then gets nothing and boots from the cd again. If I take the cd out, it sits there for a bit, then tells you that you need to insert a system disk. The 120gb hdd is pinned to master mode, and the 80gb is pinned for slave. They are plugged into their respective master and slave plugs on the IDE cable.
First, the information as it is. I had a hard drive issue that I'm working on currently, trying to recover I suppose what is a crashed hard drive. There are tons of errors on it, but that's not the question I have right at the moment, but some background.
I have tried to reinstall Windows on a brand new 2.5" Seagate 500GB 7200rpm HDD. I formatted the drive using the windows 7 ultimate installer and booted it using a USB booter made from the windows 7 download tool.
When I booted it up and tried to get it going, it gave me a hardware error saying "Windows wasn't able to configure the hardware and try startup repair" or something to that effect. I read around and it said that since my BIOS says the HD is in raid configuration that it needed some Intel Raid driver, which I installed and tried running, but it didn't seem to work. It says now "windows cannot repair this computer automatically". The problem signature is as follows:
Problem Event Name StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385
[Code].....
Primary HDD in the BIOS is recognized as 500GB RAID is On as well. Trying to install Windows 7 Ultimate 64 bit.
What happened to my computer is, I kept getting the BSOD, I went into safe mode, removed the most recent programs I had installed, and it stopped happening. I then proceeded to plug in my external hard drive. It was not recognizing it for some reason, so I went to disk management. It was listed there, just without a drive letter. I tried to assign it a drive letter, and it gave me an error message saying something about refreshing the list, (this is the error message I should have researched), I tried refreshing the drive list, and tried reassigning the drive letter, same message. I right clicked on the drive again, and I saw mark as active. For some stupid reason, I clicked on this. Then seeing that it didn't do anything, I thought maybe restarting the computer would maybe do the trick. Now my computer won't boot.
It gets to the windows logo, and boom, restarts all over again. I tried many things like, startup repair, system restore, marking partition as active CMD, with diskpart, I also tried some of the commands in bootrec.exe. By the way, if this helps at all, my hard drive is a solid state drive, I also have a slave drive in there which does also have a copy of windows installed on it, (it was my old hard drive), I tried setting that as my primary boot and it boots into my old install of windows, before i got my solid state drive. Is there a way I can fix the startup by having access to it from an operating system instead of the recovery environment?
Is it possible to dual boot windows 7 and ubuntu, with ubuntu on a external hard drive? I can connect my external hard drive via USB 2.0, USB 3.0 or E-SATA. I want windows 7 as my main OS.
I set it up so that I could access my E: drive from either the windows or ubuntu operating system. It has worked perfectly so far (about 6 months). But, here is the problem:For some reason as the share drive (my E: drive / sda3) grows Windows thinks that the windows system drive (sda2/c:drive) is also growing. So that now I have a low storage warning stating that there is only 8.76 GB of free space left on my 99 GB C: drive. When, in reality, there should be about 77 GB of free space. I've made hidden files/folders viewable and downloaded treesizefree so I know what should be on the drive. The Treesizefree output shows the expected 22 GB of space but also shows only 9 GB of free space. So, the missing space is nearly exactly the size of my shared drive (sda3/E:drive). So somehow, I think the windows OS is double counting my shared E: drive against my C: drive.
I have a Dell Inspiron 1545 (2.5 years old). All my data is backed up so I have no concerns about recoverying data.First, the laptop crashed and ran several chkdsk on start up. I froze several times during this. It said it had fixed some errors then started up again.This time it wanted to do start up repair. Same thing kept happening, froze at least twenty times during this. Eventually it gave me the blue screen of death.
'Technical information *** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8004C1D260, 0xFFFFFA8004C1D498, 0xFFFFF8000130DDA0)'
This repeated several times. I ran the diagnostics and it told me the hard drive could not be found (error code 0146, 2000-0146). Essentially, it's a Dell laptop (I know) and I am not bothered about recovering the hard drive.I would, however, like to install Windows 7, or alternatively Linux, onto my external hard drive. But I just can't seem to get it to work.I have extracted a Linux iso to the external hard drive I want to install on, onto a cd, onto a FAT32 8gb usb stick, but it has given me the bootmgr is missing error every time. I have tried it with the interal HDD in and removed.I am no longer concerned about the internal HDD, i can use it for a door stop for all I am concerned, I just want to load ANY os onto my external hard drive so I can get the laptop working.
I just bought a new computer with Windows 7 Professional 64 bit . I added 2 hard drives from my old computer to the new one. The old computer was Windows XP 32 bit with a Raid 1 configuration. I just want the added hard drives as storage and non raid. The installation went smoothly but the new computer recognizes the 2 added hard drives as one drive. Also when I boot up, the boot screen from the old computer shows briefly with the intel raid 1 info.
