Adding A Second (Used) Hard Drive?

Jul 23, 2011

I'm running a custom built system, but want to add a used hard drive to the system so I can copy all of the old important files off it to the new hard drive. I had them all on an external, but the external failed a day or two after the backup, just my luck.Is there any risk in me just plugging in the second hard drive to a SATA port?

View 3 Replies


ADVERTISEMENT

Hard Drive Partition: Adding Free Space Back To C Drive?

Sep 7, 2012

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.

View 4 Replies View Related

Hard Drive Partition: Adding Free Space Back To C: Drive

Jan 15, 2013

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.

I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.

View 2 Replies View Related

Adding Hard Drive On Windows 7 Will Not Boot?

Jun 4, 2011

So, I've added a second hard drive to my Windows machine and now it will not boot up. I added the new hard drive on SATA 3. The original is SATA 1, and my DVD is SATA 0. This is how it's always been; I've changed nothing else. I don't have any idea where to start fixing this. I have a dual boot with Ubuntu on the same SATA drive 1, and that boots just fine. I switched on the new hard drive in the BIOS, and flipped a few other options on and off to no avail.When the computer boots I choose the Win7 install. Then it will take me to a screen that asks me if I want to start windows normally, or do a disk repair. Starting normally gets you nowhere, it will just end up resetting the computer. Starting the disk check will do a scan for a few minutes and then ask me if I want to send an error report. Clicking yes or no doesn't seem to matter because after that the only option is to shutdown or reboot.When this first started I at one point had the option to do a system restore, but I didn't think it was necessary so I didn't. I no longer receive that option or I would try it at this point

View 2 Replies View Related

Adding Internal Hard Drive, Not Showing

May 5, 2012

I have a dead laptop, I believe it was the hard drive, anyway. I took the hard drive out, connected it to my Network computer, all looks well, I heard it spinning (Good sign?) and then I booted the computer, it didn't actually load windows 7, it spent like a good 10-15mins saying "Loading windows 7" so I turned it off, moved the SATA cable to a different slot, it booted.. then when trying to detect the drive, it doesn't exist. I will need to format it, as it does have windows 7 on that drive aswell.

View 1 Replies View Related

Adding Windows 7 Imaged Hard Drive To XP Machine?

Jul 20, 2010

My company is running several XP machines. All of these machines will need to have a hard drive added to them that will be imaged with our corporate Windows 7 image. How can I get the Windows 7 bootloader to recognize the XP install? We don't want to have to use a 3rd party app such as EasyBCD. We would like to create a batch file that utilizes the capabilities of bcdedit.exe to modify the bootloader so we can repeat the process multiple times with out installing the 3rd party app. (plus, the boss doesn't want us using the 3rd party app).

View 3 Replies View Related

Windows 7 Stops Booting In UEFI Mode After Adding Another Hard Drive?

Aug 17, 2012

This week, I encountered the following strange problem for which I haven't found a final solution so far, though I have found some bandaids. But having a complete solution -or at least a reason why this problem occurs- would be great:I have a working installation of Windows 7 Professional x64 in UEFI mode. The main disk, SSD #1, contains the following partitions (using GPT): ESP, MSR, system, data. An additional disk, HD #2, with a single data partition (using MBR) is also attached to the system. With this setup, everything works fine.Now, after adding another disk, HD #3, to the system -my old system disk (bootable, using MBR, one active primary partition and an extend partition with three logical disks)- Windows will no longer boots completely: The boot process begins, the Windows logo is shown. Then, a message is shown in text mode "Windows is loading files" with a loading bar. After a while the boot process stops and I am dropped into the EFI shell. After removing the offending HD #3, Windows boots normally again.

I tried removing HD #2 and only attaching HD #3 together with SSD #1, but this yielded the same problem. Using SSD #1 by itself works fine though. Booting from a Linux live-cd works without problems. All disks and partitions are found and can be mounted. There, I erased the disk signature from the offending HD #3 and now Windows was able to boot and also found all disks and partitions correctly. But after a reboot the same problem reappeared

View 9 Replies View Related

Adding Old Hard Drives To New Computer?

Mar 30, 2012

I just bought a new computer with Windows 7 Professional 64 bit . I added 2 hard drives from my old computer to the new one. The old computer was Windows XP 32 bit with a Raid 1 configuration. I just want the added hard drives as storage and non raid. The installation went smoothly but the new computer recognizes the 2 added hard drives as one drive. Also when I boot up, the boot screen from the old computer shows briefly with the intel raid 1 info.

View 5 Replies View Related

System Slows After Adding Second Hard Disk?

Jun 6, 2012

I just installed a second hard disk on my MSI GT780 machine with 8GB of RAM, both drives are detected working perfectly. The old hdd, a generic 5400 rpm, is mainly for storage and the new one, 7200 rpm is where I installed my OS. Both are 500GB in capacity.The only thing I noticed is that I'm getting some lags, CPU usage would spike up to 90-100%, RAM never goes over 50% while gaming (Batman Arkham City and Battlefield 2). This never happened before I added the 2nd hdd and before then, I can have 2 games in the background (GTA4 & Battlefield 3) while browsing and music steaming with no problems at all. I updated the motherboard and VGA drivers after a fresh install on the new hdd.I'm using a 64bit Windows 7 Ultimate using the same installer I had for the old hd.

View 8 Replies View Related

Clone Hard Drive To 64gb Flash Drive And Restore To Another Hard Drive?

Nov 14, 2012

I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.

View 3 Replies View Related

Adding 2nd Bootable Drive & OS To PC ?

Jul 9, 2010

I have a laptop with Windows 7 Ultimate as the bootable C: drive and wish to add a 2nd bootable drive using a caddy holding the 2nd HDD in a modular bay. If I wish to install Windows XP on the 2nd HDD it will presumably be configured as the D: drive and all the programs installed on it will adopt the assignation as being on D: Am I correct in assuming that if I swapped this drive into the main laptop drive bay most or none of the programs would work as their configuration would not be set up for a C: drive? I would prefer to get the 2nd bootable OS on the drive in the caddy as it will save constantly having to remove the C: drive and swap it with the 2nd drive. I am sure this is a fairly common issue, it's just that I have never set up this type of configuration before.

View 7 Replies View Related

Adding Xp Drive To Windows 7 Computer?

Jan 24, 2012

I read the dual boot thread, with two hard drives. Just want to be perfectly safe. My wife doesn't like Win 7, I would like to install the XP drive from the previous computer. Both are sata, I have the XP drive in, but have not used an XP install disk. I don't want to lose data on either drive. My thoughts are to use XP on the new computer, and just copy any data from the Win 7 drive to a thumb drive, then to the XP drive. Eventually, the Win 7 drive could serve as backup, with Win 7 ignored. I do not have a Win 7 install disk.

View 7 Replies View Related

Adding Folder And Drive Shortcuts To Task Bar

May 23, 2009

On XP, I would put shortcuts to my different hard drives and folders on the taskbar for quick access. Seems like Windows 7 task bar doesn't let me do this and only allows me to put program files only (yes task bar is unlocked).

is there a way to add hard drive and folder short cuts?

View 1 Replies View Related

Pc Doesn't Boot After Adding A Liteon Drive

Mar 4, 2012

So i got my Liteon 524 DVD-DL writer this morning , and as soon as i got it , i shut the pc down and put the drive in , then when starting the pc again , it started working for about 5 seconds then shut down again , then in 4 seconds it started on its own again then shut down , during the 5 seconds when it started , all the fans are on and everything looks as if its working all right , but the monitor doesnt get any signal at all , i then tried to clean it with a blower and checking on the cables again , then tried booting it up , it started working and then shut down again like last time , but now it stays about 12 seconds instead of 5 , i also tried to remove the battery and return it again to reset the BIOS but nothing happened , tried booting without HDD or CD drives but still nothing ...

View 4 Replies View Related

Upgrading Hard Drive On A Solid State/Hard Drive System?

Oct 25, 2011

So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet? 

View 9 Replies View Related

Blue-screen When Adding XP To Windows 7-64bit, Change Drive Settings?

Dec 23, 2012

I run Windows 7-64 and need to install XP. I made a space, and booted from the XP CD. After it loaded files, when starting, it crashed. I read on a forum I need to set the drive to compatibility mode (called legacy in my setup). It warns my OS may not boot.What should I do? I'm afraid to change the drive setting and have Windows 7 not boot. But I need to get XP working. I do have two drives. Second is a backup, I could install XP on that, and set the second drive to legacy, and leave my primary drive's current settings.

View 8 Replies View Related

Computer Is Not Booting Hard Drive/Unresponsive Hard Drive?

Jun 16, 2011

I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.

View 2 Replies View Related

Make Internal Hard Drive Into And External Hard Drive?

Mar 30, 2012

I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable

View 3 Replies View Related

Internal Hard Drive Acting Like An External Hard Drive?

Mar 4, 2010

Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?

View 6 Replies View Related

Transfer Files From Bad Sata Hard Drive To New Hard Drive?

Dec 24, 2011

I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?

View 4 Replies View Related

Software To Transfer Files From One Hard Drive To Another Hard Drive?

Jan 21, 2013

I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.

View 1 Replies View Related

Install Vista On One Hard Drive, Win 7 On Hard Drive 2

Nov 16, 2009

I have Vista installed on my Hard Drive, 250 GB.

But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.

Is that possible, to have both separately?

View 3 Replies View Related

Hard-drives Apparently Corrupted After Attempted To Install A Second Hard Drive?

Oct 8, 2011

make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?

View 5 Replies View Related

External Hard Drive - Drive Letter Changed - Unable To Change Back?

Aug 21, 2012

I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.

View 2 Replies View Related

Accidentally Changed Hard Drive With OS To Dynamic Drive.startup Fail?

Sep 23, 2010

My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....

View 8 Replies View Related

Random Floppy Drive Seek And Hard Drive Light Flashing?

Dec 13, 2011

I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place

View 7 Replies View Related

Low Disk Space, Can Transfer Data On D Drive To An External Hard Drive

Nov 13, 2012

Low disk space, Can transfer data on D drive to an external hard drive

View 5 Replies View Related

Optical Drive Clicks Twice When Starting Video On Hard Drive

Oct 18, 2012

Almost new Inspiron 5720- Home Premium. i7 quad.

After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!

View 6 Replies View Related

Replacing Ultrabook Hard Drive / How To Get Windows On New Drive

Sep 8, 2012

I'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.

View 9 Replies View Related

Drive Icon Missing For Partitions On Hard Drive?

Mar 14, 2011

I just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.

View 2 Replies View Related

Change Hard Drive To Solid State Drive?

Jun 12, 2012

Is it possible and feasible to change the hard drive to a solid state drive on a Toshiba Satellite Pro L300-1FK laptop.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved