I have a laptop with Windows 7 Ultimate as the bootable C: drive and wish to add a 2nd bootable drive using a caddy holding the 2nd HDD in a modular bay. If I wish to install Windows XP on the 2nd HDD it will presumably be configured as the D: drive and all the programs installed on it will adopt the assignation as being on D: Am I correct in assuming that if I swapped this drive into the main laptop drive bay most or none of the programs would work as their configuration would not be set up for a C: drive? I would prefer to get the 2nd bootable OS on the drive in the caddy as it will save constantly having to remove the C: drive and swap it with the 2nd drive. I am sure this is a fairly common issue, it's just that I have never set up this type of configuration before.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
I'm running a custom built system, but want to add a used hard drive to the system so I can copy all of the old important files off it to the new hard drive. I had them all on an external, but the external failed a day or two after the backup, just my luck.Is there any risk in me just plugging in the second hard drive to a SATA port?
I read the dual boot thread, with two hard drives. Just want to be perfectly safe. My wife doesn't like Win 7, I would like to install the XP drive from the previous computer. Both are sata, I have the XP drive in, but have not used an XP install disk. I don't want to lose data on either drive. My thoughts are to use XP on the new computer, and just copy any data from the Win 7 drive to a thumb drive, then to the XP drive. Eventually, the Win 7 drive could serve as backup, with Win 7 ignored. I do not have a Win 7 install disk.
So, I've added a second hard drive to my Windows machine and now it will not boot up. I added the new hard drive on SATA 3. The original is SATA 1, and my DVD is SATA 0. This is how it's always been; I've changed nothing else. I don't have any idea where to start fixing this. I have a dual boot with Ubuntu on the same SATA drive 1, and that boots just fine. I switched on the new hard drive in the BIOS, and flipped a few other options on and off to no avail.When the computer boots I choose the Win7 install. Then it will take me to a screen that asks me if I want to start windows normally, or do a disk repair. Starting normally gets you nowhere, it will just end up resetting the computer. Starting the disk check will do a scan for a few minutes and then ask me if I want to send an error report. Clicking yes or no doesn't seem to matter because after that the only option is to shutdown or reboot.When this first started I at one point had the option to do a system restore, but I didn't think it was necessary so I didn't. I no longer receive that option or I would try it at this point
On XP, I would put shortcuts to my different hard drives and folders on the taskbar for quick access. Seems like Windows 7 task bar doesn't let me do this and only allows me to put program files only (yes task bar is unlocked).
is there a way to add hard drive and folder short cuts?
So i got my Liteon 524 DVD-DL writer this morning , and as soon as i got it , i shut the pc down and put the drive in , then when starting the pc again , it started working for about 5 seconds then shut down again , then in 4 seconds it started on its own again then shut down , during the 5 seconds when it started , all the fans are on and everything looks as if its working all right , but the monitor doesnt get any signal at all , i then tried to clean it with a blower and checking on the cables again , then tried booting it up , it started working and then shut down again like last time , but now it stays about 12 seconds instead of 5 , i also tried to remove the battery and return it again to reset the BIOS but nothing happened , tried booting without HDD or CD drives but still nothing ...
I have a dead laptop, I believe it was the hard drive, anyway. I took the hard drive out, connected it to my Network computer, all looks well, I heard it spinning (Good sign?) and then I booted the computer, it didn't actually load windows 7, it spent like a good 10-15mins saying "Loading windows 7" so I turned it off, moved the SATA cable to a different slot, it booted.. then when trying to detect the drive, it doesn't exist. I will need to format it, as it does have windows 7 on that drive aswell.
I have a compaq presario that keeps showing this. I put another HDD in and it is saying the same thing. Does it mean the old HDD was buggered and I need to do something to the new one to sort out boot order or anything? or is this not a HDD issue. I have two broken compaq presarios here. One with no screen working and one saying no bootable disk drive.
I'm making a bootable thumb drive with all the best recovery and testing tools I can think of. Problem is I cant think of any other tools to put on it.
So far I have Hiren's boot cd, ubcd, ubcd4win, XP install disk image (dunno if the xp works yet), clonezilla, ubuntu, and orphcrack.
Anyone else have any ideas on other disks I should put on there or favorite tools?
How to make pen drive as bootable.I tried with several open source applications but I am getting target device not found.my system USB and pendrive both are working condition.
I have a computer with two drives, both of them have a licensed version of Windows 7 installed. My problem is that the boot dirve is installed on the large hard drive (1 TB) and I need be able to boot off of my small ssd drive so that I can replace the 1 TB with a 3 TB. how can i make ssd drive bootable with out re-installing windows and redoing all of my settings, and programs.
My company is running several XP machines. All of these machines will need to have a hard drive added to them that will be imaged with our corporate Windows 7 image. How can I get the Windows 7 bootloader to recognize the XP install? We don't want to have to use a 3rd party app such as EasyBCD. We would like to create a batch file that utilizes the capabilities of bcdedit.exe to modify the bootloader so we can repeat the process multiple times with out installing the 3rd party app. (plus, the boss doesn't want us using the 3rd party app).
I had XP and Vista installed on my primary SATA hard drive (on SATA0 channel). There was no space for another operating system, so I added a secondary hard drive (to SATA2 channel) and installed Windows 7 to it. It worked perfectly. After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore. So I put the remaining live hard drive to SATA0 channel, and bought another new SATA drive and put it to SATA2 channel. Now I need to add boot files to my drive, because both operating system and data files are there, I just need to let the computer start.
So I have one good healthy SATA drive, Windows 7 installed on it, but without boot files, because that other (now dead) drive was used to start up the computer. I though that Windows 7 Installation DVD will help, but it doesn't. When I try to use its repair disk feature, it fails to find any installed Windows, so it says there's nothing to boot to, nothing to reapir. If I use the command line utility from the same DVD, I can see both my C: and D: partitions are there, with all files, I can see all my directories, I can see Windows folder, Program Files folder etc. But what does it need to boot?
I also tried "upgrade" from W7 Installation DVD, but it says that I should run this option from inside Windows. Since I cannot start the Windows, this option isn't for me. When I tried a new fresh installation, I got a warning that all my current data will be overwritten, and that also isn't option I am searching for.
Learn how to make any bootable CD or DVD bootable on a USB flash drive. This process allows you to quickly and easily create bootable USB flash drive copies of important software, such as Microsoft Windows, firmware update utilities, and various Linux operating system distributions. Most CDs and DVDs that are bootable in a native environment can be made bootable on USB with the Universal USB Installer utility by Pen Drive Linux.See: Universal USB Installer - Easy as 1 2 3 | USB Pen Drive Linux
I am having 500gb usb hardisk in which i had create a partition of 10gb and i want to create that partition bootable with windows 7 pls tellme what to do there are many ways given to make harddisk bootable but its for complete harddisk not for selected partition.
I just received my new Corsair 16GB Survivor Stealth USB Flashdrive. Is it possible to make the USB drive bootable...yet still able to store regular files (word docs, pictures, mp3's etc.) without compromising the ability to make it boot if needed? If so what is the best way to go about making this happen? (I already know how to make a flash drive a dedicated bootable).
I recently built me a new pc. Everything went fine and I managed to install windows 7 64 bit. Couple of days later, I needed to re-install windows again. So I changed the bios so that it would recognise the dvd drive and boot the windows cd. However, this doesn't seem to happen. Once windows is installed, the Sata drive is recognised in windows and is usable. I managed to get a workaround by using an ide dvd drive to install windows but I would like to be able to use the Sata drive that I have put in the machine.
When I installed windows 7 64 Ultimate I set up a multiboot machine from within Vista, I installed windows 7 and Ubuntu on separate hard drives (one HD per OS). The boot menu is on the Vista drive. All drives are SATA.I soon formatted the Ubuntu drive and removed the option to boot to it. My Vista OS no longer boots, it just hangs whilst loading so I want to format that drive now and just use Windows 7. However, I have tried removing all the hard drives apart from the windows 7 one and I find that this will not boot.i would like to make the windows 7 drive bootable but I am not sure how to do this.I have tried removing all the HD's apart from the none booting windows 7 HD and putting in the Windows 7 disk and carrying out the option to repair start up (not sure exactly what this was called) several times but this does not make any difference. It just prompts me to restart the machine and boots again from the DVD.
I have been having many problems with my old hardcover and after finding out it was the source of all my problems I decided to go out and buy myself a new hard drive today,It is a 3.5" internal sata 2
7200 rpm 32 mb cache From intenso
My motherboard has two sata slots, I managed to install windows on my new hard drive through the files saved onto my other hard rive. Windows is successfully installed on my hard rive but I have to keep the old one in to boot from, is there a way to create a partition on my new Hardrive to boot from so I can unplug my old hard drive as it takes up the slot where my DVD drive should go.
I want to create a pendrive bootable but for that is it necessary to have ur windows setup in ur dvd or cd? becoz i have my setup in one of my computer's drive E.so what command i should write in order to make pendrive bootable at the last..
when I install window 8...so the existing window 7 files moved into D drive(which was in c drive previously). so window 8 files are in C drive. so when I starting my computer only window 8 is booting....window 7 is not booting....bcoz D drive not bootable. so what can do I do? I want solution so that both windows work..
I have a USB Kingston DataTraveler 2 GB jump drive that my wife uses with our philips stereo. I used HP USB Disk Storage Format Tool 2.2.3 with some Windows 95 files to create a bootable USB. After i was done I deleted everything on it and put mp3s back on. The stereo says "no audio found". I used Acronis Disk Director 11 to delete the partition and put FAT32 partition on there. Same thing with the stereo saying no audio found.
I would like to make a copy of my C drive in a hidden drive, like on a bought PC.I know it's easy to reinstall but when you take account of the time involved to get all your software loaded and up and running it takes ages.
I just recently bought a new motherboard (old one died), and didn't realize that it had no IDE port on it for easy Windows 7 re-installation (my only available dvd drive is still IDE). After trying to find a friend with one, I ended up trying to make a bootable thumb drive using the Windows 7 bootable USB drive utility and my father's computer, and every single time I've tried to do it, it gives an error right at the end about bootsect.exe saying it isn't bootable.
Asus P5QL-VM, Intel Core 2 Duo q9300, 4gb (2x2gb) ram, seagate SATA hard drive of some sort, GEForce 9800GTX+ gpu.
I'm using Windows 7 Professional as a 32 bit version. Now I want to install Windows 7 Professional 64 bit on my machine from my USB drive. The problem is that my machine doesn't boot from the USB drive. Anyway, I've tried with a 32 bit version of Windows 7 on my USB drive. This works well, but not with a 64 bit version. Why it doesn't work? Just to be on the safe side, I've tested it several times with other USB drives and followd thoroughly the instructions(diskpart).
I have two HD drives, one SATA and one IDE, plus one SATA CD/DVD drive. Firstly I used to have XP on the SATA and Windows 7 on the IDE, but the IDE drive is smaller and slower and I wanted to essentially swap them over. The boot devices are set in the bios as CD/DVD first, SATA second, IDE third.
So I have installed XP first on the IDE and now Windows 7 on the SATA, but after I removed the Windows 7 DVD and restarted it is refusing to boot saying NO BOOT DEVICE DETECTED, INSERT SYSTEM DISK. Now if I place the Windows 7 dvd in the drive and ignore the PRESS ANY KEY TO BOOT FROM CD/DVD...., it will book fine.
This will surely fustrate non-technical users no end and some may not even think to try and replace the OS disk and try again. I think I know what has happened, but more importantly how do I go and fix it to just boot without needing a damn boot disk everytime!?
I'm trying to make an external hard drive bootable without losing any data that's already stored on it, if possible and use it to install Windows 7 on my computer, I'm currently running XP.
