I want to create a pendrive bootable but for that is it necessary to have ur windows setup in ur dvd or cd? becoz i have my setup in one of my computer's drive E.so what command i should write in order to make pendrive bootable at the last..
View 3 RepliesWhen I installed windows 7 64 Ultimate I set up a multiboot machine from within Vista, I installed windows 7 and Ubuntu on separate hard drives (one HD per OS). The boot menu is on the Vista drive. All drives are SATA.I soon formatted the Ubuntu drive and removed the option to boot to it. My Vista OS no longer boots, it just hangs whilst loading so I want to format that drive now and just use Windows 7. However, I have tried removing all the hard drives apart from the windows 7 one and I find that this will not boot.i would like to make the windows 7 drive bootable but I am not sure how to do this.I have tried removing all the HD's apart from the none booting windows 7 HD and putting in the Windows 7 disk and carrying out the option to repair start up (not sure exactly what this was called) several times but this does not make any difference. It just prompts me to restart the machine and boots again from the DVD.
View 7 Replies View Relatedwhat is the name of the software used for making pen drive bootable for windows7
View 1 Replies View RelatedI'm using Windows 7 Professional as a 32 bit version. Now I want to install Windows 7 Professional 64 bit on my machine from my USB drive. The problem is that my machine doesn't boot from the USB drive. Anyway, I've tried with a 32 bit version of Windows 7 on my USB drive. This works well, but not with a 64 bit version. Why it doesn't work? Just to be on the safe side, I've tested it several times with other USB drives and followd thoroughly the instructions(diskpart).
View 6 Replies View RelatedI'm running into issues recently with a number of Windows 7 pc's where the hard disk will no longer be accessible. If I use startup repair, it will fail and not detect the disk or not even reach the recovery options screen. If I plug the drive into another windows pc, it will want to initialize and format.I can plug the disk into a mac or linux and am able to read / write to the disk as normal. The only way i've overcome this so far is to reformat the drive.
View 3 Replies View RelatedI am about to buy a new internal hard drive for my laptop, and want to do a clean install of Windows 7. My laptop came with XP, but I did an online upgrade to Windows 7 (student edition) Professional.
How can I create a bootable Windows 7 disk so when I put my new hard drive in my computer, it will setup Windows 7 for me? I also don't have any old XP disks because my laptop didn't come with any.
I looked on my C: Drive but couldnt find any .iso files or anything like that?
I'm trying to install 7 on a VHD using the command prompt. Now it does work but the problem is that it installs 7 Basic when I do it like this. I have Professional. Now I can use the Anytime Upgrade and use my product key to get Pro activated but because I'm in basic, 7 won't work on the VHD at boot. When it asks for my product key upon first time setup, it doesn't work since it's looking for a Basic product key.
Is there a way to get 7 Pro on the VHD through the CMD?
I'm Trying to make a Bootable flash drive for Windows 7 64 bit. I know the link to download it but I copy the files to the Thumb drive now I get bootmrg I don't think I got all of the images downloaded right.
View 12 Replies View RelatedI currently have a disc copy of windows 7 and I am currently running it as my main OS as well. I was wondering just in case my computer decides to have a few issues is there anyway I can make a data partition to store windows 7 or put it on a flash drive so that in the incident of a hardware failure I would be able to go into my bios and boot the recovery partition or boot it from a flash drive allowing me to reinstall the OS.
View 3 Replies View Relatedhow to create windows image bootable partion in my hard drive
View 1 Replies View RelatedMy system is Dell Inspiron 17R SE (7720), 1 TB Hard Disk 5400 rpm + 32 GB mSATA, 8 GB RAM, 3rd Gen i7. I was trying to make a bootable USB flash drive for windows 7 from Windows 7 Home Premium Reinstall disk that came with my Dell laptop, using the WinToFlash utility. But in starting the process, the PC froze, all applications (even explorer.exe) stopped, and Alt+Ctrl+Del refused to work. I turned the laptop off and back on, where it refused to even show the OS list and showed a DRMK message instead with a command prompt C:> as:
Loading DRMK V8.00...
DRMK Version 8.00
COMMAND.COM Build 37 - Jul 28, 2008
DRMK KERNEL Build 15 - Aug 8, 2008
Copyright (c) 2006-2008 Dell Inc. All rights reserved.
C:>
I tried booting from Windows 7 reinstall DVD but none of the repair options worked. I tried reinstall and repair options but my Hard Drive did not show up. It rather asked to Load Drivers for the Hard Disk. However, it did show any of the USB drives I connected to it, along with an X: drive, which must be the recovery drive for Dell's factory restore. I tried looking for Hard Disk drivers in that but no luck.
Then I downloaded from another PC a USB utility for Seagate Hard Drives from Dell website that makes a bootable USB. I ran that utility and it showed all the test passed (But there was no firmware update during the tests). Another thing I tried was using list disk command on command prompt in Windows Repair, but It did not show any drives, not even the X: drive. It only showed the USB drives I attached to it, or the DVD drive in list volume command.
I cannot boot to windows, I cannot install new windows, I cannot repair the windows and I cannot even factory restore my laptop. The hard drive shows up in BIOS, but not in Windows Boot or Windows Installation. Is there any way I can get my Hard Disk back without losing data? I have two partitions of that drive. I don't care about formatting C: Drive (Windows) but I wanna preserve E: Drive (the one filled with personal data but no programs).
How to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
View 2 Replies View RelatedI have a compaq presario that keeps showing this. I put another HDD in and it is saying the same thing. Does it mean the old HDD was buggered and I need to do something to the new one to sort out boot order or anything? or is this not a HDD issue. I have two broken compaq presarios here. One with no screen working and one saying no bootable disk drive.
View 5 Replies View RelatedI have a laptop with Windows 7 Ultimate as the bootable C: drive and wish to add a 2nd bootable drive using a caddy holding the 2nd HDD in a modular bay. If I wish to install Windows XP on the 2nd HDD it will presumably be configured as the D: drive and all the programs installed on it will adopt the assignation as being on D: Am I correct in assuming that if I swapped this drive into the main laptop drive bay most or none of the programs would work as their configuration would not be set up for a C: drive? I would prefer to get the 2nd bootable OS on the drive in the caddy as it will save constantly having to remove the C: drive and swap it with the 2nd drive. I am sure this is a fairly common issue, it's just that I have never set up this type of configuration before.
View 7 Replies View RelatedI'm making a bootable thumb drive with all the best recovery and testing tools I can think of. Problem is I cant think of any other tools to put on it.
So far I have Hiren's boot cd, ubcd, ubcd4win, XP install disk image (dunno if the xp works yet), clonezilla, ubuntu, and orphcrack.
Anyone else have any ideas on other disks I should put on there or favorite tools?
How to make pen drive as bootable.I tried with several open source applications but I am getting target device not found.my system USB and pendrive both are working condition.
View 5 Replies View RelatedI have a computer with two drives, both of them have a licensed version of Windows 7 installed. My problem is that the boot dirve is installed on the large hard drive (1 TB) and I need be able to boot off of my small ssd drive so that I can replace the 1 TB with a 3 TB. how can i make ssd drive bootable with out re-installing windows and redoing all of my settings, and programs.
View 4 Replies View RelatedI had XP and Vista installed on my primary SATA hard drive (on SATA0 channel). There was no space for another operating system, so I added a secondary hard drive (to SATA2 channel) and installed Windows 7 to it. It worked perfectly. After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore. So I put the remaining live hard drive to SATA0 channel, and bought another new SATA drive and put it to SATA2 channel. Now I need to add boot files to my drive, because both operating system and data files are there, I just need to let the computer start.
So I have one good healthy SATA drive, Windows 7 installed on it, but without boot files, because that other (now dead) drive was used to start up the computer. I though that Windows 7 Installation DVD will help, but it doesn't. When I try to use its repair disk feature, it fails to find any installed Windows, so it says there's nothing to boot to, nothing to reapir. If I use the command line utility from the same DVD, I can see both my C: and D: partitions are there, with all files, I can see all my directories, I can see Windows folder, Program Files folder etc. But what does it need to boot?
I also tried "upgrade" from W7 Installation DVD, but it says that I should run this option from inside Windows. Since I cannot start the Windows, this option isn't for me. When I tried a new fresh installation, I got a warning that all my current data will be overwritten, and that also isn't option I am searching for.
Learn how to make any bootable CD or DVD bootable on a USB flash drive. This process allows you to quickly and easily create bootable USB flash drive copies of important software, such as Microsoft Windows, firmware update utilities, and various Linux operating system distributions. Most CDs and DVDs that are bootable in a native environment can be made bootable on USB with the Universal USB Installer utility by Pen Drive Linux.See: Universal USB Installer - Easy as 1 2 3 | USB Pen Drive Linux
View 1 Replies View RelatedI am having 500gb usb hardisk in which i had create a partition of 10gb and i want to create that partition bootable with windows 7 pls tellme what to do there are many ways given to make harddisk bootable but its for complete harddisk not for selected partition.
View 3 Replies View RelatedI just received my new Corsair 16GB Survivor Stealth USB Flashdrive. Is it possible to make the USB drive bootable...yet still able to store regular files (word docs, pictures, mp3's etc.) without compromising the ability to make it boot if needed? If so what is the best way to go about making this happen? (I already know how to make a flash drive a dedicated bootable).
View 8 Replies View RelatedI recently built me a new pc. Everything went fine and I managed to install windows 7 64 bit. Couple of days later, I needed to re-install windows again. So I changed the bios so that it would recognise the dvd drive and boot the windows cd. However, this doesn't seem to happen. Once windows is installed, the Sata drive is recognised in windows and is usable. I managed to get a workaround by using an ide dvd drive to install windows but I would like to be able to use the Sata drive that I have put in the machine.
View 2 Replies View RelatedI have been having many problems with my old hardcover and after finding out it was the source of all my problems I decided to go out and buy myself a new hard drive today,It is a 3.5" internal sata 2
7200 rpm
32 mb cache
From intenso
My motherboard has two sata slots, I managed to install windows on my new hard drive through the files saved onto my other hard rive. Windows is successfully installed on my hard rive but I have to keep the old one in to boot from, is there a way to create a partition on my new Hardrive to boot from so I can unplug my old hard drive as it takes up the slot where my DVD drive should go.
How to Make a MS-DOS Bootable Flash Drive ?
View 0 Replies View Relatedwhen I install window 8...so the existing window 7 files moved into D drive(which was in c drive previously). so window 8 files are in C drive. so when I starting my computer only window 8 is booting....window 7 is not booting....bcoz D drive not bootable. so what can do I do? I want solution so that both windows work..
View 1 Replies View Relatedmy main pc got a new motherboard and requires a fresh install of windows 7. Ok, I have the windows 7 iso and I have the motherboard installed into my computer. I put the ISO on my flash drive but when I booted from the flash drive I got "Reboot and select a proper boot device or insert media in selected device and press a button." After 2 days and countless hours searching I can not get this to work. The computer I am on right now is a Windows XP 32x laptop. Is it even possible for me to make a usb drive loaded with windows 7 ultimate 64x for another computer? With every step by step guide I found on how to do this they either said to use the Windows 7 usb dvd download tool (which is what I have been using since the beginning to no avail) or do it manually. To do it manually involves the Diskpart feature of the command prompt, which on xp, doesnt detect flash drives. So...I cant do it manually.tell me if I have to reinstall my old motherboard (heatsink installation is a pain which is why I dread installing motherboards) and then upon reinstalling old motherboard do I have to set up my flash drive (again) and hope I didnt mess up just to rip the motherboard back out and put the new new one back in and hope the usb boots this time?
View 3 Replies View RelatedI have a USB Kingston DataTraveler 2 GB jump drive that my wife uses with our philips stereo. I used HP USB Disk Storage Format Tool 2.2.3 with some Windows 95 files to create a bootable USB. After i was done I deleted everything on it and put mp3s back on. The stereo says "no audio found". I used Acronis Disk Director 11 to delete the partition and put FAT32 partition on there. Same thing with the stereo saying no audio found.
View 3 Replies View RelatedI would like to make a copy of my C drive in a hidden drive, like on a bought PC.I know it's easy to reinstall but when you take account of the time involved to get all your software loaded and up and running it takes ages.
View 9 Replies View RelatedI just recently bought a new motherboard (old one died), and didn't realize that it had no IDE port on it for easy Windows 7 re-installation (my only available dvd drive is still IDE). After trying to find a friend with one, I ended up trying to make a bootable thumb drive using the Windows 7 bootable USB drive utility and my father's computer, and every single time I've tried to do it, it gives an error right at the end about bootsect.exe saying it isn't bootable.
Asus P5QL-VM, Intel Core 2 Duo q9300, 4gb (2x2gb) ram, seagate SATA hard drive of some sort, GEForce 9800GTX+ gpu.
I have two HD drives, one SATA and one IDE, plus one SATA CD/DVD drive. Firstly I used to have XP on the SATA and Windows 7 on the IDE, but the IDE drive is smaller and slower and I wanted to essentially swap them over. The boot devices are set in the bios as CD/DVD first, SATA second, IDE third.
So I have installed XP first on the IDE and now Windows 7 on the SATA, but after I removed the Windows 7 DVD and restarted it is refusing to boot saying NO BOOT DEVICE DETECTED, INSERT SYSTEM DISK. Now if I place the Windows 7 dvd in the drive and ignore the PRESS ANY KEY TO BOOT FROM CD/DVD...., it will book fine.
This will surely fustrate non-technical users no end and some may not even think to try and replace the OS disk and try again. I think I know what has happened, but more importantly how do I go and fix it to just boot without needing a damn boot disk everytime!?
I'm trying to make an external hard drive bootable without losing any data that's already stored on it, if possible and use it to install Windows 7 on my computer, I'm currently running XP.
View 9 Replies View Related