I would like to make a copy of my C drive in a hidden drive, like on a bought PC.I know it's easy to reinstall but when you take account of the time involved to get all your software loaded and up and running it takes ages.
View 9 RepliesMy system is Dell Inspiron 17R SE (7720), 1 TB Hard Disk 5400 rpm + 32 GB mSATA, 8 GB RAM, 3rd Gen i7. I was trying to make a bootable USB flash drive for windows 7 from Windows 7 Home Premium Reinstall disk that came with my Dell laptop, using the WinToFlash utility. But in starting the process, the PC froze, all applications (even explorer.exe) stopped, and Alt+Ctrl+Del refused to work. I turned the laptop off and back on, where it refused to even show the OS list and showed a DRMK message instead with a command prompt C:> as:
Loading DRMK V8.00...
DRMK Version 8.00
COMMAND.COM Build 37 - Jul 28, 2008
DRMK KERNEL Build 15 - Aug 8, 2008
Copyright (c) 2006-2008 Dell Inc. All rights reserved.
C:>
I tried booting from Windows 7 reinstall DVD but none of the repair options worked. I tried reinstall and repair options but my Hard Drive did not show up. It rather asked to Load Drivers for the Hard Disk. However, it did show any of the USB drives I connected to it, along with an X: drive, which must be the recovery drive for Dell's factory restore. I tried looking for Hard Disk drivers in that but no luck.
Then I downloaded from another PC a USB utility for Seagate Hard Drives from Dell website that makes a bootable USB. I ran that utility and it showed all the test passed (But there was no firmware update during the tests). Another thing I tried was using list disk command on command prompt in Windows Repair, but It did not show any drives, not even the X: drive. It only showed the USB drives I attached to it, or the DVD drive in list volume command.
I cannot boot to windows, I cannot install new windows, I cannot repair the windows and I cannot even factory restore my laptop. The hard drive shows up in BIOS, but not in Windows Boot or Windows Installation. Is there any way I can get my Hard Disk back without losing data? I have two partitions of that drive. I don't care about formatting C: Drive (Windows) but I wanna preserve E: Drive (the one filled with personal data but no programs).
I'm using an HP laptop and made a bootable flash key with the Microsoft utility (which I downloaded from Microsoft) to make a Windows 7 installation. I(supposedly) changed the boot order in the bIOS to look first at the key. Didn't work - booted directly into Windows 7 (seemingly bypassed the bootable key)1. How do I tell if the USB key is bootable?2. What could have prevented my BIOS from remembering my new boot order?3. What might be the reason(s) why my laptop won't boot from the USB key?�HP Pavilion dv5t-1000 CTO Entertainment Notebook PCSerial Number: CNF84816H3 Product Number: kq573av
View 2 Replies View RelatedI have to overwrite a windows 7 64 bit OEM with a windows 7 64 bit professional iso I got (yes I obtain it legally). I burned it onto a disc using a just a regular burning software that came with my computer(macbook pro), but you can't do that can you? You have to use a certain program that turns it into a bootable dvd, right? Am I correct or am I just taking nonsense.
View 5 Replies View RelatedI recently got a virus (I got it professionally removed) that caused all my personal files (pictures, music, etc) to become hidden. I went into folder options to make it show hidden files. I can now go individually to each picture file and make it unhidden, but I have thousands of pictures. I tried going to the folder and doing "select all" to select all the pics in that folder, but when I go to properties the hidden box is grayed out. Is there anyway to make all hidden files unhidden without going through them one by one?
View 2 Replies View RelatedI am trying to get Windows 7 up-and-running on my Toshiba M200 tablet with an SSD.
The problem is that I do not have an external DVD and these machines don't allow booting from USB.
I've managed to get a fresh install onto the drive by installing it onto a partition of the old disk based drive and then copying this over using Norton Ghost. Unfortunately I cannot get this to boot, which I assume is a problem with the MBR.
I have a second machine running Windows 7, and If I mount the SSD using a USB caddy it all seems healthy and is marked as an active partition. Is there any way to get this drive booting without being able to load up the repair functions on the DVD?
I downloaded the Win 7 Home Premium Upgrade ISO file from MS and am using MagicISO trying to make it bootable. Magic tells me the file is bootable ( and it will now open in the DVD tray) but the computer will not boot to it.I want to do a clean install, but feel as though I've hit the wall. For the time/money I've already spent I could have bought the full version at Walmart.
View 5 Replies View Relatedi just copy windows 7 data from win 7 dvd and corupted my win 7 dvd how to make windows 7 bootable dvd from data on my hard drive
View 2 Replies View RelatedI recently upgraded my CPU, PSU, Motherboard and Ram. I kept my original dvd drive and hard drive. I have an issue when trying to start windows, it shows a blue screen for half a second and then restarts again. I have tried to use the repair tool but it doesn't work.
The person in this link had the same problem : [URL]
and someone mentioned that you have to do a clean install as my hard drive was so old and the motherboard is so new. What I am going to do is use an external hard drive I have and make it bootable so that I can place windows files on there as I do not have the windows disk.
My question is, once I have booted it from the external drive can I install the windows from the external hard drive onto my old hard drive so that I can unplug the external one after I have finished?
I have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting and fixing but to no end.
I have another disk with a working and booting install of Windows 7 (same architecture etc) on. I have the entire contents of the non-booting system disk that I can access from the image of it.
If I booted into something like Windows Recovery or Live Linux environment, can I copy the entire contents of the non-working Windows 7 drive over the working one and expect it to work and then boot?
I'm using an HP laptop and made a bootable flash key with the Microsoft utility (which I downloaded from Microsoft) to make a Windows 7 installation. I (supposedly) changed the boot order in the bIOS to look first at the key. Didn't work - booted directly into Windows 7 (seemingly bypassed the bootable key).
1. How do I tell if the USB key is bootable?
2. What might be the reason(s) why my laptop won't boot from the USB key?
. I have 2 of them, one is a Western Digital Caviar Blue, about 2 years old I think. The second is a Western Digital as well, but I'm unsure of the type and age, it's a 150GB drive. One of these drives are making an odd noise, I suspect it's the main drive, the 500GB Caviar Blue. Reason being is because after starting up my system and selecting either Windows 7 or Windows XP it does a Disk Check before going to the Welcome screen, it does not do the Disk Check every time, but it happens quite often. Disk Check of course displays no issues upon completing. The thing I notice that happens, but not very often, it's about a 1 second kind of low screech noise coming from my computer tower. It is making me worried of my computer health and how much longer is might live.
View 7 Replies View RelatedI have an HP desktop computer that I just bought an SSD for. I made the "recovery media" disks, I'm assuming that's the OS backed up? I want to make the SSD my boot drive. I put in the disks and unplugged the HDD and plugged in the SSD and I'm at a screen called "Recovery Manager". Do I do the "factory reset" to install the OS on this SSD?
View 4 Replies View RelatedI have backed up all the files and emails from a faulty hard drive before inserting a new one and setting up Windows on it. However, because the drive was in such a bad way, I did't run Outlook to extract the email account settings - and now realise that these are hidden in the registry. I have tried importing the registry files (after doing some research on this), but cannot find the registry section which contains it.
Now that the the new drive is fully running (apart from the email account settings) - Windows Vista upgraded to Windows 7 - would it be too risky to re-insert the drive in the laptop to run Outlook and get the settings recorded ? I am concerned that it will cause error messages when I re-insert the brand new drive. I have thought about booting up a computer from the faulty drive, but think it may refuse to load because it's a different PC to one it came out of (Dell XPS M1530) - is this the case ?
My folders on my hard drive are hidden (the only way I can view them is through Folder and Search Options in Organise). I can not unhide. See this picture for details (it shows ONE of my folders in my Hard Drive that is hidden): Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting.How do I unhide these folders?
View 3 Replies View Relatedi dont find my local drive my system
View 2 Replies View RelatedI was checking Microsoft Office Word Starter 2010 and I realized that one of the files had hidden text in it. From Options - Display, I chose show hidden text and it was "Top of Form" at the top of the page. But I got curious about this and made some search and I realized that you can hide text in a txt file with a stream method and also there can be hidden streams in processes also.How can I find out if a doc(x) file has no streams in it. I mean the hidden text may be seen by the method of Options - Display; but can someone hide something with a password in a doc(x) file? If yes, how can I find this out?
View 2 Replies View RelatedI have a compaq presario that keeps showing this. I put another HDD in and it is saying the same thing. Does it mean the old HDD was buggered and I need to do something to the new one to sort out boot order or anything? or is this not a HDD issue. I have two broken compaq presarios here. One with no screen working and one saying no bootable disk drive.
View 5 Replies View RelatedI have a laptop with Windows 7 Ultimate as the bootable C: drive and wish to add a 2nd bootable drive using a caddy holding the 2nd HDD in a modular bay. If I wish to install Windows XP on the 2nd HDD it will presumably be configured as the D: drive and all the programs installed on it will adopt the assignation as being on D: Am I correct in assuming that if I swapped this drive into the main laptop drive bay most or none of the programs would work as their configuration would not be set up for a C: drive? I would prefer to get the 2nd bootable OS on the drive in the caddy as it will save constantly having to remove the C: drive and swap it with the 2nd drive. I am sure this is a fairly common issue, it's just that I have never set up this type of configuration before.
View 7 Replies View RelatedI'm making a bootable thumb drive with all the best recovery and testing tools I can think of. Problem is I cant think of any other tools to put on it.
So far I have Hiren's boot cd, ubcd, ubcd4win, XP install disk image (dunno if the xp works yet), clonezilla, ubuntu, and orphcrack.
Anyone else have any ideas on other disks I should put on there or favorite tools?
How to make pen drive as bootable.I tried with several open source applications but I am getting target device not found.my system USB and pendrive both are working condition.
View 5 Replies View RelatedI have a computer with two drives, both of them have a licensed version of Windows 7 installed. My problem is that the boot dirve is installed on the large hard drive (1 TB) and I need be able to boot off of my small ssd drive so that I can replace the 1 TB with a 3 TB. how can i make ssd drive bootable with out re-installing windows and redoing all of my settings, and programs.
View 4 Replies View RelatedRecently my 1tb hard-drive has starting making these low pitched grumbling noises almost like a vibration when its being accessed. I notice it most when I am defragmenting or gaming. It does not happen when I defragment my other hard drive.
View 3 Replies View Relateddon't want to buy an expensive external optical drive so am trying to think of how to make a sata or ide internal optical drive into an external one for emergencies.anyone know if i can get adaptors for the power and data connections?have googled but no luck.oops found some build ideas on Internet - should have looked there first i suppose
View 5 Replies View RelatedI have a drive that doesn't show in Windows Explorer, but if I open Computer Management, it shows that it exists and is functioning properly.It is an external drive, connected by USB 2.0, directly to the computer, which is a Dell XPS 410. The drive itself is a Western Digital. It was working fine as of last week (which is when I last noticed; it could have been working until a later date) and I don't recall any additions/subtractions/changes to my system.
View 2 Replies View RelatedMade a drive/folder hidden but cannot remember how to un-hide drive or folder. Can anyone shed some light on this problem I am having. Running homemade pc and windows 7 ultimate?
View 1 Replies View RelatedI had XP and Vista installed on my primary SATA hard drive (on SATA0 channel). There was no space for another operating system, so I added a secondary hard drive (to SATA2 channel) and installed Windows 7 to it. It worked perfectly. After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore. So I put the remaining live hard drive to SATA0 channel, and bought another new SATA drive and put it to SATA2 channel. Now I need to add boot files to my drive, because both operating system and data files are there, I just need to let the computer start.
So I have one good healthy SATA drive, Windows 7 installed on it, but without boot files, because that other (now dead) drive was used to start up the computer. I though that Windows 7 Installation DVD will help, but it doesn't. When I try to use its repair disk feature, it fails to find any installed Windows, so it says there's nothing to boot to, nothing to reapir. If I use the command line utility from the same DVD, I can see both my C: and D: partitions are there, with all files, I can see all my directories, I can see Windows folder, Program Files folder etc. But what does it need to boot?
I also tried "upgrade" from W7 Installation DVD, but it says that I should run this option from inside Windows. Since I cannot start the Windows, this option isn't for me. When I tried a new fresh installation, I got a warning that all my current data will be overwritten, and that also isn't option I am searching for.
Learn how to make any bootable CD or DVD bootable on a USB flash drive. This process allows you to quickly and easily create bootable USB flash drive copies of important software, such as Microsoft Windows, firmware update utilities, and various Linux operating system distributions. Most CDs and DVDs that are bootable in a native environment can be made bootable on USB with the Universal USB Installer utility by Pen Drive Linux.See: Universal USB Installer - Easy as 1 2 3 | USB Pen Drive Linux
View 1 Replies View RelatedI am having 500gb usb hardisk in which i had create a partition of 10gb and i want to create that partition bootable with windows 7 pls tellme what to do there are many ways given to make harddisk bootable but its for complete harddisk not for selected partition.
View 3 Replies View RelatedI just received my new Corsair 16GB Survivor Stealth USB Flashdrive. Is it possible to make the USB drive bootable...yet still able to store regular files (word docs, pictures, mp3's etc.) without compromising the ability to make it boot if needed? If so what is the best way to go about making this happen? (I already know how to make a flash drive a dedicated bootable).
View 8 Replies View RelatedI recently built me a new pc. Everything went fine and I managed to install windows 7 64 bit. Couple of days later, I needed to re-install windows again. So I changed the bios so that it would recognise the dvd drive and boot the windows cd. However, this doesn't seem to happen. Once windows is installed, the Sata drive is recognised in windows and is usable. I managed to get a workaround by using an ide dvd drive to install windows but I would like to be able to use the Sata drive that I have put in the machine.
View 2 Replies View Related