I'm using an HP laptop and made a bootable flash key with the Microsoft utility (which I downloaded from Microsoft) to make a Windows 7 installation. I (supposedly) changed the boot order in the bIOS to look first at the key. Didn't work - booted directly into Windows 7 (seemingly bypassed the bootable key).
1. How do I tell if the USB key is bootable?
2. What might be the reason(s) why my laptop won't boot from the USB key?
In order to be able to Boot from a flash drive , I understand this ability must be enabled in ones system .I have a desktop and a new laptop in neither of which do I see this choice .I presume this is a choice originally installed on the m/b and it would not , therefore , be possible to use software to enable it ?
View 1 Replies View RelatedI'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.
I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.
Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.
This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.
So I tried to manually set up the bootable flash drive, which also didn't work.
After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. [URL] I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.
Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS) Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.
Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, x64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 3063 Mb
Graphics Card: NVIDIA GeForce GTX 560, 1023 Mb
Hard Drives: C: Total - 476837 MB, Free - 132797 MB; E: Total - 234627 MB, Free - 205990 MB; F: Total - 234316 MB, Free - 233246 MB;
Motherboard: ASUSTeK Computer INC., P7P55D PRO
Antivirus: AVG Anti-Virus Free, Updated and Enabled
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever. Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB. This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.So I tried to manually set up the bootable flash drive, which also didn't work. After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive. Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn. Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
View 1 Replies View Relatedi am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
View 3 Replies View RelatedHow can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB;
Motherboard: FOXCONN, 2AB1
Antivirus: Norton 360, Updated and Enabled
. I have 2 of them, one is a Western Digital Caviar Blue, about 2 years old I think. The second is a Western Digital as well, but I'm unsure of the type and age, it's a 150GB drive. One of these drives are making an odd noise, I suspect it's the main drive, the 500GB Caviar Blue. Reason being is because after starting up my system and selecting either Windows 7 or Windows XP it does a Disk Check before going to the Welcome screen, it does not do the Disk Check every time, but it happens quite often. Disk Check of course displays no issues upon completing. The thing I notice that happens, but not very often, it's about a 1 second kind of low screech noise coming from my computer tower. It is making me worried of my computer health and how much longer is might live.
View 7 Replies View RelatedI would like to make a copy of my C drive in a hidden drive, like on a bought PC.I know it's easy to reinstall but when you take account of the time involved to get all your software loaded and up and running it takes ages.
View 9 Replies View RelatedI have an HP desktop computer that I just bought an SSD for. I made the "recovery media" disks, I'm assuming that's the OS backed up? I want to make the SSD my boot drive. I put in the disks and unplugged the HDD and plugged in the SSD and I'm at a screen called "Recovery Manager". Do I do the "factory reset" to install the OS on this SSD?
View 4 Replies View RelatedRecently my 1tb hard-drive has starting making these low pitched grumbling noises almost like a vibration when its being accessed. I notice it most when I am defragmenting or gaming. It does not happen when I defragment my other hard drive.
View 3 Replies View Relateddon't want to buy an expensive external optical drive so am trying to think of how to make a sata or ide internal optical drive into an external one for emergencies.anyone know if i can get adaptors for the power and data connections?have googled but no luck.oops found some build ideas on Internet - should have looked there first i suppose
View 5 Replies View RelatedMy system is Dell Inspiron 17R SE (7720), 1 TB Hard Disk 5400 rpm + 32 GB mSATA, 8 GB RAM, 3rd Gen i7. I was trying to make a bootable USB flash drive for windows 7 from Windows 7 Home Premium Reinstall disk that came with my Dell laptop, using the WinToFlash utility. But in starting the process, the PC froze, all applications (even explorer.exe) stopped, and Alt+Ctrl+Del refused to work. I turned the laptop off and back on, where it refused to even show the OS list and showed a DRMK message instead with a command prompt C:> as:
Loading DRMK V8.00...
DRMK Version 8.00
COMMAND.COM Build 37 - Jul 28, 2008
DRMK KERNEL Build 15 - Aug 8, 2008
Copyright (c) 2006-2008 Dell Inc. All rights reserved.
C:>
I tried booting from Windows 7 reinstall DVD but none of the repair options worked. I tried reinstall and repair options but my Hard Drive did not show up. It rather asked to Load Drivers for the Hard Disk. However, it did show any of the USB drives I connected to it, along with an X: drive, which must be the recovery drive for Dell's factory restore. I tried looking for Hard Disk drivers in that but no luck.
Then I downloaded from another PC a USB utility for Seagate Hard Drives from Dell website that makes a bootable USB. I ran that utility and it showed all the test passed (But there was no firmware update during the tests). Another thing I tried was using list disk command on command prompt in Windows Repair, but It did not show any drives, not even the X: drive. It only showed the USB drives I attached to it, or the DVD drive in list volume command.
I cannot boot to windows, I cannot install new windows, I cannot repair the windows and I cannot even factory restore my laptop. The hard drive shows up in BIOS, but not in Windows Boot or Windows Installation. Is there any way I can get my Hard Disk back without losing data? I have two partitions of that drive. I don't care about formatting C: Drive (Windows) but I wanna preserve E: Drive (the one filled with personal data but no programs).
I am using a Dell Inspiron 14 laptop. A few days ago, I noticed that my laptop has become incredibly slow (the system will hang sometimes, and continue as per normal after a while), and this coincided with my laptop beginning to make this weird, sharp beeping sound. At first I did not pay much attention to it, but later this was joined by several BSODs, and my laptop became even slower (games that usually did not lag was now hanging halfway through, and continuing as per normal after a lengthy period of 1 minute or so). I tried to find the origin of the noise, and I think it came from my Internal hard drive sector, and thus decided to open the sector up (in hindsight I probably should not have). After I replaced it, without doing much (just doing the usual IT-amateur stuff, wiping it and blowing it a few times), my situation has now worsened to the point that startup takes a much longer time, and finally now it hangs at the "Starting Windows" screen, but without the Windows 7 logo showing, and my screen later turns black.
View 9 Replies View RelatedBefore I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI had a failure to my system drive (was my fault). Anyhow the drive was still under warranty so I did an RMA with WD. While waiting for my replacement drive, I reinstalled Windows 7 to another HD and it is now my system drive. Now that my replacement drive have arrived, I image the other HD and restore to the replacement HD. My question is, how can I have it boot from the replacement HD?
What I did was mark the old HD as inactive and marked the replacement as active but when I boot up, it tells me it cannot find a boot device.
When I am installing Windows (XP or 7), I first set the computer's CMOS to "Boot from CD ROM" first. Then I put the factory CD or DVD into the drive. Then I turn the machine on. After POST, I see the message "Press any key to boot from CD" and it continues. OK - that's normal
Now - let's do this: I copy the image of the bootable CD onto a flash drive. I then set the computer to "Boot from USB Flash drive" first. I install the flash drive. I turn the machine on. I never see the message "Press any key to boot from CD".
The computer's BIOS has several choices of "boot from flash drive" Which one do I choose? Question: Do I have to format the flash as a bootable? Is a simple "copy all" from a factory installation disk sufficient? Should I use a "clone' program to prepare the flash drive?
I am currently trying to install Windows 7 Professional RTM to my computer. After installing it onto my laptop, I followed the same exact steps to install the 64 bit version instead of the 32 bit on my netbook. A problem that occured is that when I go on the bios, there is several options to boot from, and none of them are working. I tried USB-CD, USB-FDD, USB-HDD and none are working... Does anyone have any suggestions?
View 9 Replies View RelatedMy computer yesterday was an XP machine with one hard drive. I wanted to test Windows 7 but I was afraid I would screw something up with my XP drive in the process. We'll call this Drive A.
Yesterday I bought a new hard drive, Drive B. I downloaded the Windows 7 ISO, got some drivers, and turned off my computer. I physically removed Drive A from the computer and put Drive B in. I started the computer and put the DVD in. Setup was fine, I had some trouble with getting the onboard NIC to work but I was able to overcome.
Now I needed to get back into my XP install to get some stuff done (play video games). I shut my computer down, pulled out Drive B, put Drive A back in and booted up. But I got a boot error message, and it looks like it's a Windows 7 Boot error message. How can this be if I removed the hard drive.
0xc000000e
The boot selection failed because a required device is inaccessible
It's almost as if my computer is trying to boot to Windows 7 even though I removed the hard drive containing the operating system. How do I get into my XP system? The drive is fine, I connected it as a slave and I can access the files on there. I'm guess Windows 7 makes some kind of change on the motherboard that forces it to boot to 7?
laptop not booting on dvd or pen drive. i have tried a lot. my dvd drive is ok but not reading windows cd or any bootable pendrive
View 2 Replies View RelatedI recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
My friend asked me to fix her laptop, which has been failing to boot, getting as far as the blue Windows 7 login screen then hanging. The login UI doesn't load, it's just the blue background.I tried to re-install Windows from the boot disc, but when I put in the disc, I wasn't able to boot from it. Instead the computer booted from the hard-drive again and hung at the same place. This is after changing the boot priority in the BIOS.Since the laptop is out of warranty, and is to all intents and purposes a brick, I removed the Hard-drive, and connected it to my computer to see if I could reformat the drive from there. The thing that has really puzzled me though, is that my computer wouldn't boot when this hard drive was attached, despite running fine before I attached the drive, and after I removed it.
Which leads me to think there's possibly a really malicious virus or something on the drive, which makes it the default boot device, despite having a corrupted operating system installed that won't boot.
I was wondering if there are any issue with dual booting Windows 7 pro 64 bit on an internal SSD drive. I currently have Windows 7 pro 64 bit on a 500gb 7200 hard drive plus a backup 1 TB 7200 rpm drive; but I wanted the speed I would get by installing win7 pro 64bit on a 250gb SSD drive. I would basically only install specific essential software like Adobe Premeire Pro and Photoshop, among others. I originally was going to use the SDD drive as a scratch disc but after reading, I thought it might be better to just install Win7 on the SSD drive. This way I could also experiment with what would be the best configuration. I still get confused about scratch disc and how useful they are if you have plenty of memory.
View 9 Replies View RelatedOk I have a emachine e725 running windows 7 32bit and a acer running on windows vista. My emachine recently crashed in the blue screen and I tried to complete a system restore. I was able to get through the advanced boot menu and use the repair your computer option to restore windows. During the windows setup process I got another blue screen and the computer restarting. It then started the process over and once it got to the step that says windows is preparing setup, it gives an error msg saying something along the lines of windows was interupted and needs to restart to complete installation, and it has an option to press ok. This cycle continues and I can not open in safe mode because it says "windows can not complete the installation in safemode. Also the option to repair your computer in the advanced menu options is no longer available. So after wrestling with windows starting up I decided to create a back up and restore disc on my acer for my windows 7 computer. I tried putting it on a disc but it would not boot. So I tried creating a installation disc of windows 7 and tried booting from the cdrom drive. Once I did that I got a error msg saying "device driver not found: MSCD001 No valid cdrom device drivers selected. It then gives me the A:>. Im not sure if I created the disc wrong since I cant unzip the entire file I downloaded with needing an encryption password.
View 9 Replies View RelatedMotherboard: Asus A8N5X
So after the hard drive fiasco that I reported in another thread, I got clever and decided to create an "Emergency Boot Drive" that would have Windows on it as well as some utilities for data recovery. I took one of the many old hard drives that I have floating around and plugged it into the computer AND unplugged my other two drives. Then I ran Windows Install off the DVD and installed Windows to the old drive. I installed my software. All was good. I plugged in the other two drives and tried to boot from the "Emergency" drive and it worked fine.Last step was to unplug the emergency drive from the motherboard, connect it via USB and try to boot. The BIOS sees the drive and I tell it to boot from the drive. So the computer is booting. The "Starting Windows" message comes up and then the system reboots. This happens everytime I try it.Does Windows reset the USB ports so that the drive suddenly vanishes?
I had my old hard drive installed in my Windows 7 computer. It worked for several months but now it started booting from the old drive that still has Windows Vista on it. My simple fix has been to unplug that drive while booting it up. Can I just delete the Windows Vista files?
View 7 Replies View RelatedI have instlled windows 7 in my c: drive and booting files are stored in another drive(d: drive). Due to this problem im unable to store my important files in d: drive. If I save my important files in that drive whenever I want to chnge the OS I suppose to format the two drives c: and d: drives. so I may lost my important files.
View 3 Replies View RelatedIt just shows the blue colour only but not recognized by laptop
View 1 Replies View RelatedWhen I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
View 14 Replies View RelatedI have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
View 1 Replies View Related
