In order to be able to Boot from a flash drive , I understand this ability must be enabled in ones system .I have a desktop and a new laptop in neither of which do I see this choice .I presume this is a choice originally installed on the m/b and it would not , therefore , be possible to use software to enable it ?
View 1 Replies
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.
I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever.
Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB.
This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.
So I tried to manually set up the bootable flash drive, which also didn't work.
After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. [URL] I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive.
Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS) Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn.
Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, x64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 3063 Mb
Graphics Card: NVIDIA GeForce GTX 560, 1023 Mb
Hard Drives: C: Total - 476837 MB, Free - 132797 MB; E: Total - 234627 MB, Free - 205990 MB; F: Total - 234316 MB, Free - 233246 MB;
Motherboard: ASUSTeK Computer INC., P7P55D PRO
Antivirus: AVG Anti-Virus Free, Updated and Enabled
I'm trying to install a Windows 7 Profession 64 bit version over a Windows 7 Home Edition 32 bit version.I know this isn't possible without a clean install, but my problem is, the installation won't boot whatsoever. Two days ago I installed a fresh copy of W7 32 bit over a vista 32 bit with a flash drive on a laptop with no problem, so I know how you make a bootable USB. This time however, using the Windows 7 USB DVD Download Tool didn't cut it for me as, even though it was prioritzed in BIOS, nothing would happen and W7 32 bit would just boot like normal.So I tried to manually set up the bootable flash drive, which also didn't work. After a lot of searching on google, I learned the problem might have something to do with the bootsector not able to be run on a 32 bit OS. I used the W7 32 bit version I used on the laptop 2 days ago, and put the bootsector of that version on the flash drive. Again, this didn't work as the computer would just boot windows 7 32 bit like usual (and again, I adjusted the priority in BIOS)Now I got enough of trying the flash drive to work, I tried burning the ISO file on a DVD using Imgburn. Burning the DVD went smoothly and I quickly had a DVD with the W7 64 bit installation files. This however, didn't solve anything as (again, prioritzing the DVD) W7 would boot up as usual.
View 1 Replies View Relatedi am receiving error 0x80070570 at "expanding files" in the windows 7 installation at around 30% into it. Its an attempt to install windows 7 via boot-able usb flash drive.now something i should mention is that this is a completely new built computer, i built it a couple of days ago[CODE]
View 3 Replies View RelatedI'm using an HP laptop and made a bootable flash key with the Microsoft utility (which I downloaded from Microsoft) to make a Windows 7 installation. I (supposedly) changed the boot order in the bIOS to look first at the key. Didn't work - booted directly into Windows 7 (seemingly bypassed the bootable key).
1. How do I tell if the USB key is bootable?
2. What might be the reason(s) why my laptop won't boot from the USB key?
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2
Processor Count: 4
RAM: 3839 Mb
Graphics Card: ATI Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB;
Motherboard: FOXCONN, 2AB1
Antivirus: Norton 360, Updated and Enabled
I was wondering if there are any issue with dual booting Windows 7 pro 64 bit on an internal SSD drive. I currently have Windows 7 pro 64 bit on a 500gb 7200 hard drive plus a backup 1 TB 7200 rpm drive; but I wanted the speed I would get by installing win7 pro 64bit on a 250gb SSD drive. I would basically only install specific essential software like Adobe Premeire Pro and Photoshop, among others. I originally was going to use the SDD drive as a scratch disc but after reading, I thought it might be better to just install Win7 on the SSD drive. This way I could also experiment with what would be the best configuration. I still get confused about scratch disc and how useful they are if you have plenty of memory.
View 9 Replies View RelatedOk I have a emachine e725 running windows 7 32bit and a acer running on windows vista. My emachine recently crashed in the blue screen and I tried to complete a system restore. I was able to get through the advanced boot menu and use the repair your computer option to restore windows. During the windows setup process I got another blue screen and the computer restarting. It then started the process over and once it got to the step that says windows is preparing setup, it gives an error msg saying something along the lines of windows was interupted and needs to restart to complete installation, and it has an option to press ok. This cycle continues and I can not open in safe mode because it says "windows can not complete the installation in safemode. Also the option to repair your computer in the advanced menu options is no longer available. So after wrestling with windows starting up I decided to create a back up and restore disc on my acer for my windows 7 computer. I tried putting it on a disc but it would not boot. So I tried creating a installation disc of windows 7 and tried booting from the cdrom drive. Once I did that I got a error msg saying "device driver not found: MSCD001 No valid cdrom device drivers selected. It then gives me the A:>. Im not sure if I created the disc wrong since I cant unzip the entire file I downloaded with needing an encryption password.
View 9 Replies View RelatedBefore I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
View 4 Replies View RelatedMy operating system is giving out, i am locking up regularly now, i feel i have too many things installed on a vary small drive to pinpoint the problem. i have been neeeding a second hard drive for a while now, i think its time.The question is, how can i boot off of one hard drive, but install all my applications on the other, as if i where booting my OS off of a 30gb ssd, just big enough for the operating system, but actually installing things on my second hard drive.
View 9 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I have a laptop that has Vista installed on it. I have an upgrade disc for Windows 7 and I am thinking about performing a "clean installation" over the Vista OS - which I know is allowed, on the following link;click here Now, I would like to create another partition (on the same hard drive) and install Vista (using the same disc that it came with the laptop) onto that blank hard drive partition
View 10 Replies View RelatedI recently built myself a new system from scratch, and plan to install Windows 7 Home Premium 64-bit onto it using an OEM copy I purchased from retail. I had planned to save money on my new machine by not installing an optical drive, since I have no need for one. My original intent was to take the optical drive out of my old machine and use it just to install Windows, but in short-sightedness didn't realize my old optical drive is not compatible with my new motherboard. After a bit of research, I have found a number of websites detailing methods of installing Windows 7 using a USB Flashdrive. I have an 8GB Flashdrive so I had hoped to work-around my problem through this method, but ran into a new problem. All of the guides require that the data be copied from the disk to the flashdrive using Windows 7/Vista, and on my old machine I am using Windows XP (which from my limited understanding, doesn't play friendly with USB drives). I found a couple of other articles detailing a more complicated method that works with XP, BUT doesn't work for me, because my copy of XP is 32-bit and the copy of Windows 7 I want to use is 64-bit.
I don't know anyone with a copy of Vista/7 64-bit already to use or with a compatible optical drive to borrow, and I really hope to avoid buying an optical drive just to install Windows.
Does anyone know of a method that I can get the information I need to install Windows 7 64-bit onto a USB Flashdrive using Windows XP 32-bit? Or any other way to get my DVD of Windows 7 installed onto my DVD drive-less computer?
i know i know... there's tons of threads about making flash drive bootable, put windows 7 onto flash drive and even has a post said ... installing windows 7 onto drive ... but no answer...i have bootable windows cd a laptop with bootable usb port capability... i am NOT trying to make a bootable windows 7 flash drive...i am trying to install windows 7 onto this removeable drive so if my hdd really dies, i can just use this flash drive as a hdd to continue do what i am doing light weight computer tasks
View 2 Replies View RelatedI have an HP laptop which I recently upgraded from Windows XP Pro to Windows 7.
The flash drive (Lexar Firelfy 2GB) I was using on the XP OS can no longer be read under the Windows 7 OS. Information are stored in it (I am able to access it with computers other than mine), but my computer does not see them.
I have also tried different flash drives with the same results. Under disk management, my computer detects the flash drive but is unable to read it.
I have Windows 7 Ult-64 installed on my desktop. I made a USB flash drive with the installation files, so I know I can boot using a flash drive. I would like to be able to boot into Windows 7 using only a flash drive (no hard drives connected). Is this possible?
View 6 Replies View RelatedWould it be possible to install Windows 7 x64 Ultimate onto my 32GB USB Flash Drive as a portable OS on the go? I'm not talking about creating a Windows 7 Installation USB Flash Drive as an alternative to a DVD Installation, I'm talking about being able to have Windows 7 x64 Ultimate OS on a USB drive.
I'm asking because I need to be able to have another Windows OS on a separate drive in order for me to be able to Secure Erase my OCZ RevoDrive PCI-E SSD using OCZ Toolbox.
Is it possible to install Windows(XP/Vista/7/embedded) onto a USB flash drive, such that it is bootable from any PC (assuming it supports USB boot and meets the minimum OS requirements)?The installation should ideally provide basic services necessary to perform mundane activities such as web surfing and word processing. I've seen guides for installing Windows onto USB flash drives and HDDs, but not one that claims to be portable. Is this at all possible?
View 9 Replies View RelatedI got my first computer build done. I am a student so I decided to buy Windows 7 from Microsoft for the student price. I had to download it so I didn't have a disk to load it from. So I followed this guide on how to use a flash drive to install Windows 7. HOW TO: Install Windows 7 from a USB stick. So far I have all of it done. I download Windows 7 as an ISO file. used MagicISO to convert extract it to my flash drive. I went through all the steps to turn my flash drive into a boot device. I put all the files onto the boot device flash drive. I start up my new build and go into the BIOS. I set the boot priority to boot first from my flash drive. When I save and restart it gives me the message that the boot device has no boot software on it.
-Have the flash drive formatted as boot device.
-Have all the Windows 7 files extracted onto flash drive.
-Changed BIOS to boot from flash drive.
-Still not working.
Also I can't redownload Windows 7 or redo this because the files are already extracted onto my flash drive.
I'd like to make a usb flash drive appear as a DVD drive so that I can use it to create Win 7 recovery 'disk'.
View 8 Replies View RelatedI have f* up my MBR partition(FAT32, is invalid now) and now W7 won't start. I haveen't made a rescue CD, as my lappy has no CD/DVD drive. Is there a tool to start W7 via USB port?
View 10 Replies View RelatedIs it possible to install and run Windows 7 on a USB flash drive as a 'live' and 'portable' operating system? I do not mean create a USB Windows 7 installer. I do not mean create a recovery tool like BartPE. I mean install Windows 7 on a flash drive as if it is a hard drive, install drivers, any software, use the net, save files, etc etc. like a normal Windows 7 environment that can be booted into. Also, compared to running Windows on VirtualBox, how does running it on a USB flash drive compare in terms of performance.
View 5 Replies View RelatedI'm building a new pc and I'm trying to save as much money as I can. So I'm wondering can I skip buying an optical drive to install my Windows 7 and just use a USB Flash Drive to install windows 7 on a NEW COMPUTER with nothing on it(no OS).
View 15 Replies View RelatedFor security reasons, I would like to create a windows 7 X64 boot USB flash Drive , not an install drive. A drive where when I remove it, the system will not boot. What files do I need to put on the drive, or is there a progrm I can use to create it?
View 6 Replies View RelatedIs it possible to load Windows 7 onto a 32GB flash drive and have it boot off there instead of an internal hard drive?
View 1 Replies View Relatedi was just wondering how i extract the files from an installation disc onto a flash drive, so i can use the flash drive to perform a clean install.Extract Files from Windows 7 Installation DVD.i already looked at this but it wasn't specific to my uses.
View 3 Replies View RelatedCannot format USB flash drive with windows 7 64bit?
View 2 Replies View RelatedI just built a new PC and it doesn't have an OS system on it right now. I just downloaded an OS on a Flash Drive. Is their anyway I can install it on my PC with no OS? Can't I go into the BIOS and set it so it reads my Flash drive first?
View 5 Replies View RelatedI am using this little rinky-dink $9.00 PNY slider drive that my wife bought because she thought it was pretty, well little ole' me has now gone through 4 of the "fastest" flash drives on the market, the Sandisk Cruiser, the OCZ Rally 2, the Corsair Voyager and another larger PNY. None of them rate more than half the speed of this little slider flash drive. I consistently get 30W and 20R on all programs I try to test it with. Other Tests show much higher result too but let's just stick with the R/W for now.BTW, I also tried the Patriot XT Xtreme series but according to the manufacturer's it is not compatible with either Acronis products or Adobe, after hours and hours with tech support and 3 different drive we figured this out. The programs only work right if the drive is unplugged.
View 3 Replies View RelatedI recently bought a new Kingston 32MB USB flash drive, but it became write protected somehow early on and I now cannot access it or send or receive data, or format it.
View 2 Replies View Relatedi have old windows vista trying to recover items on it to new windws 7.
View 2 Replies View Related
